CarProblemsDB

2013 Mazda Mazda6 problems, recalls & MPG

NHTSA has received 23 complaints from owners of the 2013 Mazda Mazda6, most often about the brakes. There are 4 safety recalls for this model year.

6.1out of 10
Our verdict
Average
  • More complaints than 43% of 2013 vehicles
  • Most reported problem: brakes (22% of complaints)
  • 4 safety recalls
  • 1 crash, 2 injuries reported
How we score
Complaints23
Recalls4
MPG combined—
Safety4/5

Most reported 2013 Mazda Mazda6 problems

Owner complaints filed with NHTSA, grouped by problem area. One complaint can mention several areas.

Brakes5 (22%)
Suspension5 (22%)
Airbags4 (17%)
Exterior lighting4 (17%)
Other / unknown4 (17%)
Body & structure3 (13%)
Seats2 (9%)
Visibility, windows & wipers2 (9%)
Electrical system1 (4%)
Fuel & propulsion system1 (4%)
Seat belts1 (4%)
Steering1 (4%)
Transmission & powertrain1 (4%)
Wheels1 (4%)

When owners reported problems

22014
12015
42017
12018
62019
12020
42021
22023
12024
12026

Complaints by the year they were filed.

Recent owner complaints

Sep 14, 2026air bags
The contact owns a 2013 Mazda Mazda6. The contact received notification of NHTSA campaign number: 18v018000 (air bags). The dealer confirmed the recall but was unable to perform the recall repair. The dealer informed the contact that there was no crash pad that was better. The dealer suggested that the vehicle be sold or not driven. The manufacturer was contacted and advised… Read more

The contact owns a 2013 Mazda Mazda6. The contact received notification of NHTSA campaign number: 18v018000 (air bags). The dealer confirmed the recall but was unable to perform the recall repair. The dealer informed the contact that there was no crash pad that was better. The dealer suggested that the vehicle be sold or not driven. The manufacturer was contacted and advised the contact to work with the dealer. The mileage was approximately 137,450.

NHTSA complaint #11764171
Jul 12, 2024suspension, structure
The contact owns a 2013 Mazda Mazda6. The contact stated that the vehicle had been repaired under NHTSA campaign number: 18v631000 (suspension, structure) where a coating was sprayed on the passenger side lower control arm and the area was drained. After receiving the recall repair, the contact became aware that the vehicle was pulling to the right and the steering wheel was… Read more

The contact owns a 2013 Mazda Mazda6. The contact stated that the vehicle had been repaired under NHTSA campaign number: 18v631000 (suspension, structure) where a coating was sprayed on the passenger side lower control arm and the area was drained. After receiving the recall repair, the contact became aware that the vehicle was pulling to the right and the steering wheel was tilted to the left. The front passenger’s side tire was slightly turned inward. The vehicle was taken to a certified mechanic where it was diagnosed and determined that the front cross member on the passenger’s side was rusted, causing several fractures. After inspecting the damaged area, the mechanic confirmed that it was the area that was repaired under recall. The vehicle was taken to the dealer but was not yet diagnosed. The vehicle was not repaired. The manufacturer was made aware of the failure and opened a case. The failure mileage was 67,000.

NHTSA complaint #11601441
Dec 19, 2023suspension, wheels, service brakes
I just baught a 2013 Mazda6 the rear cradel and cross member was complety rusted away one mount was complety rusted off .the springs was almost ready to fall out the bottem of the spring purch .it looked like it was pulled out of the ocean where it had stayed for years .I tried to find a used replacement out of several we found from 10-13 and going thru national salvage parts… Read more

I just baught a 2013 Mazda6 the rear cradel and cross member was complety rusted away one mount was complety rusted off .the springs was almost ready to fall out the bottem of the spring purch .it looked like it was pulled out of the ocean where it had stayed for years .I tried to find a used replacement out of several we found from 10-13 and going thru national salvage parts we can not find one that was not rusty away all the Mazda6 frams were so rusted they could not be used .why is this not on the recall list if all I could find are rusted out parts that is a safty hazzard to have on the road.

NHTSA complaint #11560838
Jan 4, 2023steering, suspension
My car has approx 115,000 miles. I took it to bass Mazda to have spark plugs and serpentine belt changed simply for maintenance purposes. After leaving dealership my car was pulling to the right. My steering wheel was no longer centered. It also was turned toward the right. Any time I had to hit the brakes the car pulled very hard to right. Long story short it we ended up… Read more

My car has approx 115,000 miles. I took it to bass Mazda to have spark plugs and serpentine belt changed simply for maintenance purposes. After leaving dealership my car was pulling to the right. My steering wheel was no longer centered. It also was turned toward the right. Any time I had to hit the brakes the car pulled very hard to right. Long story short it we ended up finding out that my sub frame is very rusted and cracked. My car specifically does not fall into the recall for this issue. When I called Mazda to inform them that this may be an issue with other cars the rep was ki d of rude. She just kept telling me I needed to contact the dealership to see what they could do and get cost appraisal. I was simply trying to let them know this could be an issue for other vehicles.

NHTSA complaint #11500180
Dec 30, 2021fuel/propulsion system
2013 Mazda 6 VIN [xxx] 1)fuel tank leak. Yes it is available for inspection 2)gas leak with danger of fire or explosion. 3) yes 4) no 5)yes reoccurring the 2014 Mazda 6 had a recall for the exact same problem I am having where the tank would overfill or if parked unlevel and it will activate a check engine light and "leak gas" out of the EVAP canister even while driving.… Read more

2013 Mazda 6 VIN [xxx] 1)fuel tank leak. Yes it is available for inspection 2)gas leak with danger of fire or explosion. 3) yes 4) no 5)yes reoccurring the 2014 Mazda 6 had a recall for the exact same problem I am having where the tank would overfill or if parked unlevel and it will activate a check engine light and "leak gas" out of the EVAP canister even while driving. The recall covered cars built between october 25, 2012 and may 9, 2013. My car was built 7-19-2012 and the dealer will not fix the issue. I have taken it to a dealer in cincinnati and they said put a new fuel cap on it which I did. The problem has persisted and has gotten worse. I have taken it to garages where they have merely reset the light and returned it unfixed. I have lived "because of the covid" with the situation over a year and a half by only filling the tank half full. I have only recently discovered the 2014 had a recall but not the 2013. I have spent over a 1000$ trying to get someone to fix it but no body has yet to do the job. It has potential to explode and or catch afire. I am asking for help and reporting Mazda for under recalling and fixing the recall. Information redacted pursuant to the freedom of information act (foia), 5 u.s.c. 552(b)(6).

NHTSA complaint #11445637
Aug 19, 2021electrical system
Was driving on the highway when the check engine light came on. Not 10 minutes later, I lost acceleration and steering. Managed to get to the shoulder just in time before my car pretty much died. The water light and battery light came on when I came to a stop. Mechanic discribes it as 'catastrophic engine failure'. Other than the check engine light, there were no other… Read more

Was driving on the highway when the check engine light came on. Not 10 minutes later, I lost acceleration and steering. Managed to get to the shoulder just in time before my car pretty much died. The water light and battery light came on when I came to a stop. Mechanic discribes it as 'catastrophic engine failure'. Other than the check engine light, there were no other warnings. The temperature gage was normal and there were no weird sounds or smoke. Diagnostic readings said a coolant leak lead to the radiator overheating which caused the engine to seize. The freeze frame data says 'p0117 engine coolant temperature sensor 1 circuit low'. I researched that and it said that when 'low', the check engine will come on but there will probably be no other warnings and that the sensor usually needs to be replaced around 100k miles. My vehicle is at 51k miles. Currently have 3k in repairs which does not include the cost of an engine.

NHTSA complaint #11429692
Mar 22, 2021suspension, structure, unknown or other
Related to Mazda recall number 2818i - front frame rotting out. They applied a bandaid fix under the recall, to only 1 side of the vehicle and the part they used does not even connect to the actual suspension pieces that are rotting out of the frame. It is basically a plate to keep the rotting frame from separating completely on only 1 side. The problem is the entire frame is… Read more

Related to Mazda recall number 2818i - front frame rotting out. They applied a bandaid fix under the recall, to only 1 side of the vehicle and the part they used does not even connect to the actual suspension pieces that are rotting out of the frame. It is basically a plate to keep the rotting frame from separating completely on only 1 side. The problem is the entire frame is still rotting at a crazy excessive rate. I have had many used, older vehicles and have never seen a car so new almost rendered undrivable due to the frame condition. My mechanic said it should have all been replaced given how much corrosion/rust is on the entire frame instead of only a bracket on one side... And the fix they performed is nothing more than a liability treatment to keep the car from completely falling apart and killing someone when the frame fails on that side. The frame was left in place and is rotting faster than I have even seen on a vehicle especially at less than 10years old and less than 100k miles. NHTSA needs to follow up on this recall as some dealers are doing the bear minimum to 'fix' the issue instead of replacing the frame as they should be....some of the cars were newer and were not yet experiencing the heavy rust at the time of the recall but fast forward a year or two and the entire frame is nearly junk covered by a fancy metal plate on only 1 side that is simply intended to keep the rotting frame from separating and nothing else...it didn't at all 'fix' the problem. I cann

NHTSA complaint #11404228
Mar 18, 2021visibility/wiper

The low beam headlights are so dim you barely can see anything often I have to turn on high beam lights

NHTSA complaint #11403799

2013 Mazda Mazda6 recalls (4)

Recall 19V3230002019Structure

Mazda north american operations (Mazda) is recalling certain 2011-2013 Mazda6 vehicles sold, or ever registered in connecticut, delaware, the district of columbia, illinois, indiana, iowa, kentucky, maine, maryland,massachusetts, michigan, minnesota, missouri, new hampshire, new jersey, new york, ohio, pennsylvania, rhode island, vermont, virginia, west virginia, and wisconsin. The front cross member may corrode after exposure to road salt.

Risk: Corrosion may weaken the mounting point for the passenger side lower control arm, unexpectedly changing the steering alignment and increasing the risk of a crash.

Remedy: Mazda will notify owners, and dealers will inspect the cross member and either install a side member and drain hose and apply wax to protect from rust, or install a drain hose and an improved front cross member, free of charge. The recall began june 13, 2019. Owners may contact mazda customer service at 1-800-222-5500 option 4. Mazda's number for this recall is 2818i. Note: this recall is an expansion of recall 18v-631.

Recall 18V7170002018Air bags:frontal:passenger side:inflator module Park it — do not drive

Mazda north american operations (Mazda) is recalling certain 2014-2015 Mazda cx-9 vehicles sold, or ever registered in the states of alabama, california, florida, georgia, hawaii, louisiana, mississippi, south carolina, texas, puerto rico, american samoa, guam, the northern mariana islands (saipan), and the u.s. Virgin islands or "zone a." additionally, unless covered in "zone a," Mazda is recalling certain 2011-2013 Mazda6, 2011-2012 cx-7, and 2011-2015 cx-9 sold, or ever registered in the states of arizona, arkansas, delaware, illinois, indiana, kansas, kentucky, maryland, missouri, nebraska, nevada, new jersey, new mexico, north carolina, ohio, oklahoma, pennsylvania, tennessee, virginia, west virginia and the district of columbia, or "zone b." additionally, unless covered in zone a or zone b, Mazda is recalling certain 2010-2013 Mazda6, 2010-2012 cx-7, and 2010-2015 cx-9 vehicles ever registered in the states of alaska, colorado, connecticut, idaho, iowa, maine, massachusetts, michigan, minnesota, montana, new hampshire, new york, north dakota, oregon, rhode island, south dakota, utah, vermont, washington, wisconsin, and wyoming or "zone c." these vehicles are equipped with certain air bag inflators assembled as part of the passenger frontal air bag modules used as original equipment or replacement equipment. In the event of a crash necessitating deployment of the passenger frontal air bag, these inflators may explode due to propellant degradation occurring after long-term exposure to absolute humidity and temperature cycling.

Risk: An inflator explosion may result in sharp metal fragments striking the driver or other occupants resulting in serious injury or death.

Remedy: Mazda will notify owners, and dealers will replace the front passenger air bag inflator with an alternate inflator, free of charge. The recall began november 9, 2018. Owners may contact mazda customer service at 1-800-222-5500, option 4. Mazda's number for this recall is 1317f.

Recall 18V0180002018Air bags:frontal:passenger side:inflator module Park it — do not drive

Mazda north american operations (Mazda) is recalling certain 2013 Mazda6 and cx-9 vehicles sold, or ever registered in the states of alabama, california, florida, georgia, hawaii, louisiana, mississippi, south carolina, texas, puerto rico, american samoa, guam, the northern mariana islands (saipan), and the u.s. Virgin islands or "zone a." additionally, unless covered in "zone a," Mazda is recalling certain 2010 Mazda6, cx-7 and cx-9 vehicles sold, or ever registered in the states of arizona, arkansas, delaware, district of columbia, illinois, indiana, kansas, kentucky, maryland, missouri, nebraska, nevada, new jersey, new mexico, north carolina, ohio, oklahoma, pennsylvania, tennessee, virginia, and west virginia or "zone b." additionally, unless covered in zone a or zone b, Mazda is recalling certain 2009 Mazda6, cx-7, and cx-9 vehicles ever registered in the states of alaska, colorado, connecticut, idaho, iowa, maine, massachusetts, michigan, minnesota, montana, new hampshire, new york, north dakota, oregon, rhode island, south dakota, utah, vermont, washington, wisconsin, and wyoming or "zone c." these vehicles are equipped with certain air bag inflators assembled as part of the passenger frontal air bag modules used as original equipment or replacement equipment. In the event of a crash necessitating deployment of the passenger frontal air bag, these inflators may explode due to propellant degradation occurring after long-term exposure to absolute humidity and temperature cycling.

Risk: An inflator explosion may result in sharp metal fragments striking the driver or other occupants resulting in serious injury or death.

Remedy: Mazda will notify owners, and dealers will replace the front passenger air bag inflator with an alternate inflator, free of charge. The recall began march 2, 2018. Owners may contact mazda customer service at 1-800-222-5500. Mazda's number for this recall is 1317f.

Recall 13V4250002013Latches/locks/linkages:doors:latch

Mazda is recalling certain model year 2009-2013 Mazda6 vehicles manufactured february 4, 2008, through august 24, 2012. The door latch mounting screws may become loose.

Risk: If all three door latch mounting screws become excessively loose the door latch mechanism would not engage and the door might open while the vehicle is in motion increasing the risk of accident or injury.

Remedy: Mazda will notify owners, and dealers will apply a thread locking adhesive to the door screws and retorque them, free of charge. The recall began on october 29, 2013. Owners may contact mazda at 1-800-222-5500. Mazda's recall number is 7013i.

Crash-test ratings (NHTSA)

VersionOverallFrontalSideRollover
2013 Mazda Mazda6 4 DR FWD★★★★★★★★★★★★★★★★★★★★

Other Mazda Mazda6 years

Frequently asked questions

Is the 2013 Mazda Mazda6 a reliable car?

Our score for the 2013 Mazda Mazda6 is 6.1/10 (average). It is based on 23 owner complaints and 4 recalls compared with other 2013 vehicles and other Mazda Mazda6 years.

What are the most common problems with the 2013 Mazda Mazda6?

Owners most often report problems with brakes (5 complaints), suspension (5 complaints), airbags (4 complaints).

How many recalls does the 2013 Mazda Mazda6 have?

4 recalls are on file with NHTSA, including: 19V323000 (structure); 18V717000 (air bags:frontal:passenger side:inflator module); 18V018000 (air bags:frontal:passenger side:inflator module).

Source: NHTSA complaints & recalls, EPA fueleconomy.gov. Data updated November 18, 2026. Complaints are unverified reports by owners.