CarProblemsDB

2010 Porsche 911 GT3 problems, recalls & MPG

NHTSA has received 3 complaints from owners of the 2010 Porsche 911 GT3, most often about the engine & cooling. There are 2 safety recalls for this model year. The EPA rates it at about 16 MPG combined.

6.7out of 10
Our verdict
Average
  • More complaints than 11% of 2010 vehicles
  • Most reported problem: engine & cooling (67% of complaints)
  • 2 safety recalls
  • 1 crash, 1 fire reported
How we score
Complaints3
Recalls2
MPG combined16
Safety—

Most reported 2010 Porsche 911 GT3 problems

Owner complaints filed with NHTSA, grouped by problem area. One complaint can mention several areas.

Engine & cooling2 (67%)
Suspension1 (33%)
Transmission & powertrain1 (33%)

When owners reported problems

12012
22013

Complaints by the year they were filed.

Recent owner complaints

Jun 20, 2013engine

I had the 8 coolant fittings, prone to epoxy failures, secured to housings by welding. Cost for welding was $275. *tr

NHTSA complaint #10520819
Apr 22, 2013engine
Coolant lines / fittings welded/ pinned - mk2 mezger engine has a faulty design of coolant hoses/lines. Upon research online, I am not the only person affected but all turbo/gt3/rs/gt2 cars from 2004-current I have also come across cars with less than 10k miles that had this problem so my problem is not isolated. There has been incidence on highway where these hoses… Read more

Coolant lines / fittings welded/ pinned - mk2 mezger engine has a faulty design of coolant hoses/lines. Upon research online, I am not the only person affected but all turbo/gt3/rs/gt2 cars from 2004-current I have also come across cars with less than 10k miles that had this problem so my problem is not isolated. There has been incidence on highway where these hoses just burst or loses fitting and spills coolant contents all over the road. This also cause car to spin out since lost in pressure and traction. Very dangerous. Porsche dealer will only use different glue to fit them. Proper way is not use rubber hose but to use metal pipes and weld them so these coolant lines do not ever fall out. This could have caused catastrophic injury in public road. Porsche denies any faulty or sub-standard material that was used in a critical component of high performance engine. In order for me to fix this, I have to pay my Porsche mechanic to remove the engine, find the coolant lines, replace all of the hoses with metal pipe lines, weld them, then put it back in the engine bay. I feel that I should have to pay for this out of pocket for safety of myself or others in public road. Porsche suggested that they will use the same rubber hoses with just a better adhesive glue to hold them. They will fail within time. This is a temporary fix they are offering. It is for safety of the motorist. *tr

NHTSA complaint #10509031
May 30, 2012suspension, power trainCrashFire
Right rear centerlock hub failed/sheared off resulting in high speed exit from road surface and 800' slide. Wheel and tire left vehicle and traveled approximately 1500' crossing active road. Centerlock nut was found about 700' from vehicle. Issue seems to be failure of the centerlock hub can result in loss of wheel and vehicle crash. Buttonwillow raceway park, ca upon… Read more

Right rear centerlock hub failed/sheared off resulting in high speed exit from road surface and 800' slide. Wheel and tire left vehicle and traveled approximately 1500' crossing active road. Centerlock nut was found about 700' from vehicle. Issue seems to be failure of the centerlock hub can result in loss of wheel and vehicle crash. Buttonwillow raceway park, ca upon exiting buttonwillow turn 12 (cw direction), loud pop heard from right rear of car (witness describe very loud pop/bang "like hand grenade going off"), vehicle immediately rotated counter clockwise and exited road surface, sliding sideways (right side in direction of slide), right side down, left side up (both occupants noted they felt the vehicle was going to roll), parallel to the road surface. After sliding possibly 600 feet, car hit intersecting road (about 6 inch rise in surface) becoming airborne for possibly 20 feet passing over the road and pivoting clockwise. Upon landing, car slid parallel with original road surface, aligned with road coming to rest after about 800 feet after the hub failed. Car did not roll, the slide sideways and likely the impact with the cross road did significant damage to the car. Details on vehicle: - wheel was installed 2 days prior to incident after changing to new dot tires. Porsche centerlock mounting and torquing procedure were followed, torquing to 444 ft lb. - torque wrench setting was verified after incident and found to be set properly to 444 ft lb.

NHTSA complaint #10460064

2010 Porsche 911 GT3 recalls (2)

Recall 12V5580002012Suspension:rear:axle:spindle

Porsche is recalling certain model year 2010 911 GT3 vehicles manufactured may 15, 2009, through february 11, 2010. The rear wheel hubs may be prone to failure under certain driving conditions. Also, the original, suggested maintenance intervals may be insufficient to prevent wheel hub failure.

Risk: If the rear hub fails, there may be a loss of vehicle control, increasing the risk of a crash.

Remedy: Porsche will notify owners, and dealers will replace the wheel hubs on the rear axle free of charge. The service interval specifications will also be revised and provided to owners as part of porsche's owner notification letter. The recall began on january 22, 2013. Owners may contact porsche at 1-800-767-7243.

Recall 11V2850002011Wheels:lugs/nuts/bolts/studs

Porsche is recalling certain model year 2010-2011, 911 turbo; turbo s, 911 GT3, gt3 rs and gt2 rs high performance vehicles, manufactured from may 18, 2009 through september 17, 2010, and equipped with center locking hub and wheel assemblies. Over time the hubs can wear prematurely.

Risk: As the hubs wear, the wheels could loosen, increasing the risk of a crash.

Remedy: Dealers will replace the central locking hubs and wheels with an improved design, free of charge. The safety recall began on june 28, 2011. Owners may contact porsche at 1-800-767-7243.

Fuel economy (EPA)

EngineTransmissionDriveCityHwyComb.
3.8L 6-cylManual 6-spdRear-Wheel Drive142116

Crash-test ratings (NHTSA)

VersionOverallFrontalSideRollover
2010 Porsche 911 GT3 2-DR w/SAB————

Other Porsche 911 GT3 years

Frequently asked questions

Is the 2010 Porsche 911 GT3 a reliable car?

Our score for the 2010 Porsche 911 GT3 is 6.7/10 (average). It is based on 3 owner complaints and 2 recalls compared with other 2010 vehicles and other Porsche 911 GT3 years.

What are the most common problems with the 2010 Porsche 911 GT3?

Owners most often report problems with engine & cooling (2 complaints), suspension (1 complaints), transmission & powertrain (1 complaints).

How many recalls does the 2010 Porsche 911 GT3 have?

2 recalls are on file with NHTSA, including: 12V558000 (suspension:rear:axle:spindle); 11V285000 (wheels:lugs/nuts/bolts/studs).

What gas mileage does the 2010 Porsche 911 GT3 get?

The EPA rates the 2010 Porsche 911 GT3 at about 14 MPG city, 21 MPG highway and 16 MPG combined, depending on engine and drivetrain.

Source: NHTSA complaints & recalls, EPA fueleconomy.gov. Data updated November 18, 2026. Complaints are unverified reports by owners.