CarProblemsDB

2004 Porsche 911 GT3 problems, recalls & MPG

NHTSA has received 27 complaints from owners of the 2004 Porsche 911 GT3, most often about the engine & cooling. There are no safety recalls for this model year.

4.6out of 10
Our verdict
Buy with caution
  • More complaints than 33% of 2004 vehicles
  • Most reported problem: engine & cooling (96% of complaints)
  • No safety recalls on file
  • 3 crashes reported
How we score
Complaints27
Recalls0
MPG combined—
Safety—

Most reported 2004 Porsche 911 GT3 problems

Owner complaints filed with NHTSA, grouped by problem area. One complaint can mention several areas.

Transmission & powertrain3 (11%)
Other / unknown2 (7%)
Fuel & propulsion system1 (4%)

When owners reported problems

42011
182013
22014
22015
12017

Complaints by the year they were filed.

Recent owner complaints

Jan 23, 2017engine
The car was being driven when suddenly the coolant system failed and coolant spilled from under the engine causing my car to skid out of control. The coolant also posed a hazard to other cars on the road due to the extremely slippery nature of the liquid. The car had to be towed to an independent mechanic. The coolant lines had to be replaced and welded rather than the epoxy… Read more

The car was being driven when suddenly the coolant system failed and coolant spilled from under the engine causing my car to skid out of control. The coolant also posed a hazard to other cars on the road due to the extremely slippery nature of the liquid. The car had to be towed to an independent mechanic. The coolant lines had to be replaced and welded rather than the epoxy glue that was used in the original coolant fittings. Porsche dealerships would only use epoxy to seal the fittings which would only eventually lead to another failure.

NHTSA complaint #10947116
Aug 12, 2015power train, unknown or other
I was driving around a corner about 40 MPH when the car suddenly spun around. I then saw steam coming from the engine. Upon further inspection there was coolant on the ground. One of the coolant fittings had come completely loose, and all the coolant had leaked out. The only real fix is to weld all the coolant fittings. There are 9 of them and the engine has to be removed to… Read more

I was driving around a corner about 40 MPH when the car suddenly spun around. I then saw steam coming from the engine. Upon further inspection there was coolant on the ground. One of the coolant fittings had come completely loose, and all the coolant had leaked out. The only real fix is to weld all the coolant fittings. There are 9 of them and the engine has to be removed to do the welding. It cost me $2500 to fix this defect. This is a safety issue as I was lucky I did not hit any one or any thing. Just pure luck. When you dump large quantities of slippery coolant on to the rear tires it is just a matter of time before someone is killed. This problem is so prevalent that most race tracks won't allow a 996 or 997 gt3, gt2 or turbo on the track until the coolant lines are fixed.

NHTSA complaint #10748249
Jun 15, 2015unknown or other, engine

On very hot day, over 100 degrees f, after having just exited a freeway onto a city street, while accelerating from red light, a glued-in water coolant pipe/tube popped out from its cast housing, causing catastrophic loss of all cooling fluids which spilled onto the roadway, immediate increase in engine temperature from 185 to over 260 degrees f, and loss of power. Car needed to be towed to repair shop.

NHTSA complaint #10725341
Dec 30, 2014engine

A coolant line fitting that is epoxied into the block became suddenly and completely disconnected. The coolant all flowed out of the leak nearly instantly. The pool of coolant created a hazard for following cars and the motor needed to be shut down immediately and the car towed to a service facility. *js

NHTSA complaint #10668966
Jan 14, 2014engine
Went to streets of willow driving event. During 3rd run session I noticed steam coming from behind as I was taking a 180 degree turn. I immediately stopped the car when it was safe to do so and shut the engine off. Steam kept billowing and the car seems to have lost all it's coolant in a few seconds. 5(!) cars behind me all spun in the 180 degree turn because of this failure.… Read more

Went to streets of willow driving event. During 3rd run session I noticed steam coming from behind as I was taking a 180 degree turn. I immediately stopped the car when it was safe to do so and shut the engine off. Steam kept billowing and the car seems to have lost all it's coolant in a few seconds. 5(!) cars behind me all spun in the 180 degree turn because of this failure. Fortunately none of them crashed. After examination it turns out one of the coolant fittings that Porsche glued into the motor block with epoxy had popped out. This appears to be a very common problem with all of these gt engines. Not only is this dangerous (every gt2/3 on the road is a ticking time bomb, street or track) but it is also costly to have it fixed properly. Needless to say I had my car towed to a shop that is very familiar with this problem to get it fixed right. The solution is to weld these fittings into the motor block. There are 8 of them and the engine needs to come out of the car, the fittings all removed and cleaned from the epoxy before they can be carefully welded back into place again. It is the only valid fix. I have a receipt showing $2750 to have this done. I feel this was my only course of action to make the car safe to drive again and I think Porsche should recognize there is a problem there and reimburse owners that had this done and offer it under a recall to owners that still need to get this done. *tr

NHTSA complaint #10559755
Sep 25, 2013power train, engine
I was driving at miller motorsports in tooele utah in drivers education event when my engine temperature gauge started to increase from 180 degrees up past 200 degrees. As the temperature gauge went to 250 degrees, a coolant failure light came on. I pulled off the track and shut down the car within 2 minutes of the failure light and I had to be towed off the miller… Read more

I was driving at miller motorsports in tooele utah in drivers education event when my engine temperature gauge started to increase from 180 degrees up past 200 degrees. As the temperature gauge went to 250 degrees, a coolant failure light came on. I pulled off the track and shut down the car within 2 minutes of the failure light and I had to be towed off the miller motorsports track. I had lost all of my coolant from the car. The next morning (sunday) I took a rental car back to miller motorsports along with 9 gallons of distilled water. I poured 2 gallons of distilled water into the car, and then started it. About seven minutes later, water started spurting from an aluminum coolant line attachment that had come unglued. This aluminum attachment was in a place on the top of the engine that was readily determinable as the water was shooting straight up from where the fitting had come unglued and slipped off. I do not currently know whether I got the car stopped in time for the engine to be ok. I am afraid to drive it before I get all of the aluminum fittings reglued or welded. Because this happened on the top of the engine, the coolant did not create a situation that was a safety risk to me, but if it had been a different aluminum coolant attachment that let loose, I could have crashed at 115 MPH due to coolant on the tires or someone behind me could have crashed. The miller motorsport personnel said they noticed a plume of steam at the end of the front straight. At the end o

NHTSA complaint #10545300
Sep 6, 2013engine
The epoxy holding an aluminum elbow that connects a coolant hose to the water pump (I believe) let go, the elbow worked its way loose from the pump and emptied the coolant from the system out onto the road surface. I became aware of the problem when I noticed that the engine temperature needle had pegged at the high end of the gauge range, after which the engine temperature… Read more

The epoxy holding an aluminum elbow that connects a coolant hose to the water pump (I believe) let go, the elbow worked its way loose from the pump and emptied the coolant from the system out onto the road surface. I became aware of the problem when I noticed that the engine temperature needle had pegged at the high end of the gauge range, after which the engine temperature warning light came on. Prior thereto, the engine temperature gauge had been reading at normal levels and responding normally. I was able to stop without an accident, but I noticed after stopping that the right rear tire and wheel well were wet and slippery with coolant.

NHTSA complaint #10542207
Aug 9, 2013engine
While driving at a drivers education event at watkins glen race track, a coolant fitting came apart and out of its housing releasing about 3-4 gallons of coolant onto the track. Luckily no accident occurred. Since the car was still under warranty Porsche agreed to cover the failure under good will and a new housing (same design) was installed by the local Porsche dealer.… Read more

While driving at a drivers education event at watkins glen race track, a coolant fitting came apart and out of its housing releasing about 3-4 gallons of coolant onto the track. Luckily no accident occurred. Since the car was still under warranty Porsche agreed to cover the failure under good will and a new housing (same design) was installed by the local Porsche dealer. However, in october, 2011 while driving at another drivers education event, the same fitting failed. This time 3 cars following me slid off the track due to the coolant with one crashing into another. One car was totaled and the other seriously damaged. *tr

NHTSA complaint #10534463

2004 Porsche 911 GT3 recalls (0)

No safety recalls have been issued for the 2004 Porsche 911 GT3.

Other Porsche 911 GT3 years

Frequently asked questions

Is the 2004 Porsche 911 GT3 a reliable car?

Our score for the 2004 Porsche 911 GT3 is 4.6/10 (buy with caution). It is based on 27 owner complaints and 0 recalls compared with other 2004 vehicles and other Porsche 911 GT3 years.

What are the most common problems with the 2004 Porsche 911 GT3?

Owners most often report problems with engine & cooling (26 complaints), transmission & powertrain (3 complaints), other / unknown (2 complaints).

How many recalls does the 2004 Porsche 911 GT3 have?

There are no NHTSA safety recalls for this model year.

Source: NHTSA complaints & recalls, EPA fueleconomy.gov. Data updated November 18, 2026. Complaints are unverified reports by owners.