CarProblemsDB

2011 Mazda Mazda3 problems, recalls & MPG

NHTSA has received 132 complaints from owners of the 2011 Mazda Mazda3, most often about the airbags. There are 2 safety recalls for this model year.

4.9out of 10
Our verdict
Buy with caution
  • More complaints than 75% of 2011 vehicles
  • Most reported problem: airbags (22% of complaints)
  • 2 safety recalls
  • 12 crashes, 2 fires, 13 injuries reported
How we score
Complaints132
Recalls2
MPG combined—
Safety4/5

Most reported 2011 Mazda Mazda3 problems

Owner complaints filed with NHTSA, grouped by problem area. One complaint can mention several areas.

Airbags29 (22%)
Seats20 (15%)
Steering13 (10%)
Visibility, windows & wipers8 (6%)
Suspension7 (5%)
Tires7 (5%)
Engine & cooling5 (4%)
Seat belts5 (4%)
Stability control5 (4%)
Brakes4 (3%)
Fuel & propulsion system3 (2%)
Speed control (cruise, throttle)3 (2%)
Wheels3 (2%)

When owners reported problems

62011
72012
132013
112014
52015
152016
212017
82018
102019
92020
112021
92022
12023
22024
22025
22026

Complaints by the year they were filed.

Recent owner complaints

Jul 16, 2026air bags, seats
The contact owns a 2011 Mazda Mazda3. The contact stated that while operating the vehicle, the front driver’s side seat wobbled and was unsecured. The vehicle was taken to the local dealer, who determined that the front driver’s side seat lifter link was inoperable and needed to be replaced. The vehicle was not yet repaired. The manufacturer was notified of the failure, but no… Read more

The contact owns a 2011 Mazda Mazda3. The contact stated that while operating the vehicle, the front driver’s side seat wobbled and was unsecured. The vehicle was taken to the local dealer, who determined that the front driver’s side seat lifter link was inoperable and needed to be replaced. The vehicle was not yet repaired. The manufacturer was notified of the failure, but no assistance was provided. The contact was informed that the VIN was not included in NHTSA campaign number: 17v082000 (seats). The contact stated that the vehicle had experienced the failure listed in the recall. Additionally, the contact stated that the dashboard was melted and warped. The contact was concerned that the front air bags would not properly deploy due to the warped dashboard housing in the front driver and passenger side air bags. The failure mileage was 167,850.

NHTSA complaint #11750889
Jan 28, 2026air bagsCrash2 injured
The airbag system failed to deploy during a major accident I was in, where my car rolled multiple times, and the collision that totaled my car. This includes the front airbags, impact sensors, and/or the airbag control module not activating. The vehicle is currently in the possession of the insurance company and can be made available for inspection upon request. During the… Read more

The airbag system failed to deploy during a major accident I was in, where my car rolled multiple times, and the collision that totaled my car. This includes the front airbags, impact sensors, and/or the airbag control module not activating. The vehicle is currently in the possession of the insurance company and can be made available for inspection upon request. During the crash, no airbags deployed, which significantly increased the risk of serious injury or death. The lack of airbag deployment left my partner and me completely unprotected at the moment of impact, including the number of times we rolled, seriously putting our safety at severe risk the vehicle is no longer drivable. The police report notes that the airbags did not deploy. The vehicle is in the process of inspection by my insurance adjusters as part of the total‑loss evaluation. The manufacturer has not yet inspected the airbag system, but the vehicle can be made available if Mazda requests an inspection. There were no warning lights, messages, or symptoms indicating an airbag or safety system issue before the crash. The airbag system gave no indication of malfunction before the failure occurred.

NHTSA complaint #11713964
Nov 24, 2025unknown or other
I was driving it and randomly the at and tc , and check engine light came on and the car went into limp mode, after doing some research it appears to happen to all 2009-2011 Mazda3's and it's a safety hazard. It's a safety hazard because of when it's stuck in limp mode sometimes if your at a light or something it'll start shifting and if you're not holding the brake completely… Read more

I was driving it and randomly the at and tc , and check engine light came on and the car went into limp mode, after doing some research it appears to happen to all 2009-2011 Mazda3's and it's a safety hazard. It's a safety hazard because of when it's stuck in limp mode sometimes if your at a light or something it'll start shifting and if you're not holding the brake completely down it will make the car lurch forward like 2-3 feet more if you don't react fast enough. This is a serious problem as it can cause a wreck. And you never know when it's going to happen there will be no symptoms it will just go into limp mode sometimes it'll rapidly go in and out and I'm sure that's causing damage to my transmission. Please make Mazda recall the TCM part and replace it. Thank you so much for taking the time to read my complaint/safety issue. Have a good day or night!!!

NHTSA complaint #11701203
Sep 16, 2025unknown or other
The instrument panel above the information display in my 2011 Mazda3 has warped and created a visible gap, which is a known defect previously covered under Mazda’s special service program a9 (ssp a9). While originally described as a cosmetic issue, in my vehicle the gap now allows engine odors and emissions to enter the passenger cabin. This condition presents a safety and… Read more

The instrument panel above the information display in my 2011 Mazda3 has warped and created a visible gap, which is a known defect previously covered under Mazda’s special service program a9 (ssp a9). While originally described as a cosmetic issue, in my vehicle the gap now allows engine odors and emissions to enter the passenger cabin. This condition presents a safety and health risk to occupants. My daughter drives the vehicle daily to college and is regularly exposed to these fumes. To confirm the problem, I used a temtop m2000c advanced air quality monitor and recorded the following co₂ levels inside the cabin compared to outside air: - outside vehicle (baseline): 348 ppm - inside after 1 minute: 436 ppm - inside after 5 minutes: 1,027 ppm - inside after 15 minutes: 1,645 ppm according to the monitor’s air quality guide, 1,501–2,500 ppm co₂ is classified as “unhealthy.” these readings indicate a measurable intrusion of emissions into the cabin. Mazda customer experience has acknowledged the vehicle is outside the ssp a9 warranty window and denied repair assistance, but I believe this issue is no longer cosmetic. The defect now creates a condition that may adversely affect occupant health and safety and should be considered under NHTSA’s authority for potential investigation. The vehicle can be inspected upon request. A Mazda dealer (group 1 Mazda denton, texas) has provided a repair estimate of $1,307.77 for instrument panel replacement. Photos of the gap and air qua

NHTSA complaint #11687666
Aug 16, 2024unknown or other

The car is jerking and check engine light is on. Also when you are stopped and press on the gar it takes a bit to get speed. The transmission control module needs to be replaced. There seems to be this issue on many Mazda's just not sure why a recall hasn't been done for this case.

NHTSA complaint #11608963
Jan 22, 2024seats, engine
Defective driver's seat construction made by Mazda mfg corp. I was the first person to report this cheaply made driver's seat failure to Mazda corp in irvine, ca in early 2015 or 2016. Recall was finally issued a year afterwards because Mazda dragged their feet, and only after I threatened to sue them if I was ever in an accident, and the seat was to totally fall apart, and… Read more

Defective driver's seat construction made by Mazda mfg corp. I was the first person to report this cheaply made driver's seat failure to Mazda corp in irvine, ca in early 2015 or 2016. Recall was finally issued a year afterwards because Mazda dragged their feet, and only after I threatened to sue them if I was ever in an accident, and the seat was to totally fall apart, and maim me for life did they finally take action. The recall fix (cheap bandaid clamp that again failed because seat frame welds had failed as well) was never done right, and as a result the seat totally fell apart, and ed howard lincoln Mazda of sarasota, fl didn't want to do anything further at that point (cost out of pocket wise). I was told by a different Mazda dealership in ft myers, fl that that defective seat should have been totally replaced if they would've handled it correctly. So ed howard lincoln Mazda really screwed me on that one! As related to the 2.5l Mazda engine, I also had/have a engine failure part there as well. It's called the engine coolant (water) outlet flange, and the bottom left hand bolt (1 of 4 bolts total) that's suppose to hold this cheap plastic part in place was stripped (over-torqued) at the production assembly line time that the engine was made (put together). Now the cheap plastic replacement part is leaking again from the same lower left hand corner, and this is a well known ford & Mazda 2.5l engine failure design as stated in many a Mazda online forum! This also should h

NHTSA complaint #11567016
Mar 2, 2023seats
My seat lifter broke causing the driver's seat to rock back and forth. I brought my vehicle to my local dealer on 05/18/2022 to have an outstanding NHTSA recall 17v-082 performed to repair the issue. I was informed that the necessary part to repair the seat was on backorder and there was no eta, but that I would be contacted when a part was available. Over the following nine… Read more

My seat lifter broke causing the driver's seat to rock back and forth. I brought my vehicle to my local dealer on 05/18/2022 to have an outstanding NHTSA recall 17v-082 performed to repair the issue. I was informed that the necessary part to repair the seat was on backorder and there was no eta, but that I would be contacted when a part was available. Over the following nine months, I periodically followed up to see if they had received the part, culminating with being told by the dealer on 03/02/2023 that the part order was canceled and flagged as no longer available and that I needed to contact Mazda directly. I then called Mazda, who told me that the part was indeed marked as retired and advised that I seek an aftermarket replacement, of which none is available. They did check in my local area and found only one remaining part in a dealer's inventory, which I'll be driving to on 03/11/2023 to have the repair done. There has been no consideration made by Mazda for my safety while driving the vehicle, and for anyone still requiring this repair, the part is "retired" and no longer available from Mazda for an open recall.

NHTSA complaint #11509936
Dec 21, 2022power train

The contact owns a 2011 Mazda Mazda3. The contact stated while driving at an undisclosed speed, the clutch became inoperable. There were no warning lights illuminated. The dealer was not contacted. The vehicle was not diagnosed or repaired. The manufacturer was notified but no additional assistance was provided. The failure mileage was approximately 80,000.

NHTSA complaint #11498447

2011 Mazda Mazda3 recalls (2)

Mazda north american operations (Mazda) is recalling certain 2011 mazda2 and 2010-2011 Mazda3 and mazdaspeed3 vehicles equipped with a manual seat lifter. In the affected vehicles, the seat height adjustment lifter links may break or detach from the seat frame and the seat angle may incline causing the driver to not be able to maintain an appropriate driving position.

Risk: If the driver cannot maintain an appropriate driving position, there is an increased risk of a crash.

Remedy: Mazda will notify owners, and dealers will inspect the seat lifter links and install a reinforcement bracket to the lifter links, or replace the entire seat adjuster unit, free of charge. The recall began april 7, 2017. Owners may contact mazda customer service at 1-800-222-5500. Mazda's number for this recall is 0917b.

Recall 16V6440002016Structure:body:hatchback/liftgate

Mazda north american operations (Mazda) is recalling certain model year 2010-2013 Mazda3 and mazdaspeed3 vehicles manufactured november 18, 2008, to june 8, 2013, 2012-2015 mazda5 vehicles manufactured october 26, 2010, to june 22, 2015, 2016 cx-3 vehicles manufactured june 1, 2015, to december 26, 2015, and 2013-2016 cx-5 vehicles manufactured december 15, 2011, to december 26, 2015. On the affected vehicles, the lift gate support struts may corrode, possibly causing the struts to break and/or the lift gate to drop unexpectedly.

Risk: If the lift gate falls unexpectedly, it may hit the user, increasing their risk of injury.

Remedy: Mazda dealers will replace the both lift gate supports, free of charge, however parts are not currently available. The recall began april 2017. Owners may contact mazda customer service at 1-800-222-5500. Mazda's number for this recall is 9916h.

Crash-test ratings (NHTSA)

VersionOverallFrontalSideRollover
2011 Mazda Mazda3 5 HB FWD★★★★★★★★★★★★★★★★★★★★
2011 Mazda Mazda3 4 DR FWD★★★★★★★★★★★★★★★★★★★★

Other Mazda Mazda3 years

Frequently asked questions

Is the 2011 Mazda Mazda3 a reliable car?

Our score for the 2011 Mazda Mazda3 is 4.9/10 (buy with caution). It is based on 132 owner complaints and 2 recalls compared with other 2011 vehicles and other Mazda Mazda3 years.

What are the most common problems with the 2011 Mazda Mazda3?

Owners most often report problems with airbags (29 complaints), seats (20 complaints), other / unknown (18 complaints).

How many recalls does the 2011 Mazda Mazda3 have?

2 recalls are on file with NHTSA, including: 17V082000 (seats); 16V644000 (structure:body:hatchback/liftgate).

Source: NHTSA complaints & recalls, EPA fueleconomy.gov. Data updated November 18, 2026. Complaints are unverified reports by owners.