Brakes lines failed under truck do to rusted out lines
2004 GMC Sierra 2500 problems, recalls & MPG
NHTSA has received 50 complaints from owners of the 2004 GMC Sierra 2500, most often about the brakes. There are 4 safety recalls for this model year.
- More complaints than 46% of 2004 vehicles
- Most reported problem: brakes (38% of complaints)
- 4 safety recalls
- 3 crashes, 3 fires, 4 injuries reported
Most reported 2004 GMC Sierra 2500 problems
Owner complaints filed with NHTSA, grouped by problem area. One complaint can mention several areas.
When owners reported problems
Complaints by the year they were filed.
Recent owner complaints
Emergency brakes don't engage
Tl* the contact owns a 2004 GMC Sierra 2500. While driving approximately 45 MPH, the contact noticed a lot of white smoke emerging from the tail pipe. The vehicle was previously repaired under warranty by gwatney buick GMC (5700 landers rd, north little rock, ar 72117) for the same failure as listed in an unknown technical service bulletin regarding the fuel injectors. The… Read more
Tl* the contact owns a 2004 GMC Sierra 2500. While driving approximately 45 MPH, the contact noticed a lot of white smoke emerging from the tail pipe. The vehicle was previously repaired under warranty by gwatney buick GMC (5700 landers rd, north little rock, ar 72117) for the same failure as listed in an unknown technical service bulletin regarding the fuel injectors. The vehicle was not diagnosed or repaired for the recent failure. The manufacturer was notified of the failure. The approximate failure mileage was 90,000.
Exhaust manifold bolts broken
I was traveling south on I-75 highway about 70 MPH, in motion, in northern michigan and had to stop fast when an accident occurred in front of me. I slammed/mashed my foot on the brake pedal only to feel it fall to the floor, the metal hydraulic line failed and I now have no brakes at all!! I began to press on the parking brake and down shift the transmission to assist in the… Read more
I was traveling south on I-75 highway about 70 MPH, in motion, in northern michigan and had to stop fast when an accident occurred in front of me. I slammed/mashed my foot on the brake pedal only to feel it fall to the floor, the metal hydraulic line failed and I now have no brakes at all!! I began to press on the parking brake and down shift the transmission to assist in the slowing of the vehicle. I also steered around the stopped cars into the side and ditch of the road. I luckily had the right reactions but not all people do or cannot act as fast. This is a dangerous issue with this GMC sierra 2004. Please have it recalled. I had to have the repair shop replace all the metal brake lines as they were corroded. I have never had a vehicle fail its brake lines like this. My vehicle only has 48,000 miles on it and is garage kept super clean.
Tl* the contact owns a 2004 GMC Sierra 2500. The contact stated that the vehicle had a massive oil leak. The vehicle was taken to the dealer where it was diagnosed that the fuel injectors were defective, which filled the crankcase full of fuel and was a known issue. The vehicle would have been repaired per an extended warranty; however, it fell outside of the parameters of the… Read more
Tl* the contact owns a 2004 GMC Sierra 2500. The contact stated that the vehicle had a massive oil leak. The vehicle was taken to the dealer where it was diagnosed that the fuel injectors were defective, which filled the crankcase full of fuel and was a known issue. The vehicle would have been repaired per an extended warranty; however, it fell outside of the parameters of the extended warranty, increasing the risk of an engine compartment fire. The manufacturer was notified of the failure. The failure mileage was 112,000.
In the past three months the fuel lines needed replacement as they had rusted so badly that a leak formed. Yesterday while pulling my 10,000 pound boat, my brakes suddenly failed because of a leak in the line between the ABS box and the right front wheel. The catastrophic failure nearly caused me to lose control of my vehicle and boat. I was able to downshift and… Read more
In the past three months the fuel lines needed replacement as they had rusted so badly that a leak formed. Yesterday while pulling my 10,000 pound boat, my brakes suddenly failed because of a leak in the line between the ABS box and the right front wheel. The catastrophic failure nearly caused me to lose control of my vehicle and boat. I was able to downshift and use by emergency brake to bring the rig to a stop.
I live in south east ma. Were sault is use always and it has rotted my brake lines at the ABS controll a line let go on my truck with family and my grand babies I am a heavy truck operator with a cdl so I know not to panic I got my truck stopped without a crash but if my wife was driveing or my young daughter they wouldnt be so lucky we in the saulting states should have… Read more
I live in south east ma. Were sault is use always and it has rotted my brake lines at the ABS controll a line let go on my truck with family and my grand babies I am a heavy truck operator with a cdl so I know not to panic I got my truck stopped without a crash but if my wife was driveing or my young daughter they wouldnt be so lucky we in the saulting states should have staneless steal for safty cant be to much to ask for young lifes at stake or people who panic what should I do at the time I was in the city of taunton I was coming to a heavily traveled street in rush hour trafic the brake line to rear brakes falled because of rot on inspion I see they are all rotting and need to be repaired I dont have body rot or frame rot of any kind always car wash after storms on nice days.
2004 GMC Sierra 2500 recalls (4)
Certain federal-mogul national and carquest aftermarket hub assemblies, p/n 515058, sold for use on 2001-2006 general motors 1500 and 2500 4wd trucks. On the subject hub assemblies, the ABS sensor cord departs from the hub assembly at a 90 degree angle. As a result, there is a fit issue with the brake rotor dust shield interfering with the ABS sensor cord. If the hub assembly is installed despite this interference, the gap between the ABS sensor and the tone wheel may be altered. This may weaken the output of the ABS sensor. Diminished output could result in an unwanted ABS activation at low speeds and stopping distance could be affected.
Risk: If stopping distance is limited, a vehicle crash could occur.
Remedy: Federal-mogul will notify its owners and will either credit the customers account or replace the unit. The recall is expected to begin during june 2006. Owners can contact federal-mogul customer service at 1-800-563-8507 ext 3530.
Certain replacement fuel filters, fram brand name p/n g3727, with date codes x52911 through x60801 sequentially or x600141 and a mexico country or origin marking on the fuel filter housing manufactured from october 18, 2005, through march 21, 2006, sold for use on the vehicles listed above and on certain school buses. (to see the school bus engine sizes, click on "document search" and then "bus applications"). The connector on the fuel filter was not manufactured to honeywell's specification. As a result, the o-ring may not seat correctly on the fuel line.
Risk: This condition may cause an inadequate seal at the connection, potentially leading to a fuel leak. In the presence of an ignition source, a fire could occur.
Remedy: Honeywell will notify owners and replace the fuel filters free of charge. The recall began on october 18, 2006. Owners may contact fram customer service at 1-800-890-2075 (option 1).
Certain fabtech aftermarket replacement pitman arms, p/nos. Fts71000 and fts71001, installed for use on certain 2001-2006 GM c/k 2500 pick up trucks and sport utility vehicles. The pin located inside the pitman arm can shear off due to a reverse bending fatigue condition, resulting in a total loss of steering control.
Risk: Loss of steering control could lead to a vehicle crash with potential injury or death.
Remedy: Fabtech will notify owners and replace the pitman and idler arms free of charge. The recall is expected to begin during february 2006. Owners may contact fabtech at 909-597-7800.
On certain vans equipped with sure-lok wheelchair securement systems, the sprocket teeth of the retractor assembly is out of alignment.
Risk: In the event of a vehicle crash, the wheelchair may not be adequately secured possibly resulting in injuries to a wheelchair occupant.
Remedy: Dealers will inspect and replace the wheelchair securement retractors as necessary. Sure-lok will handle the repairs for this campaign. Owners should contact sure-lock at 1-908-231-1804 or mobilityworks at 1-800-769-8267.
Other GMC Sierra 2500 years
Frequently asked questions
Is the 2004 GMC Sierra 2500 a reliable car?
Our score for the 2004 GMC Sierra 2500 is 5.6/10 (average). It is based on 50 owner complaints and 4 recalls compared with other 2004 vehicles and other GMC Sierra 2500 years.
What are the most common problems with the 2004 GMC Sierra 2500?
Owners most often report problems with brakes (19 complaints), electrical system (14 complaints), engine & cooling (9 complaints).
How many recalls does the 2004 GMC Sierra 2500 have?
4 recalls are on file with NHTSA, including: 06E050000 (service brakes, air); 06E043000 (fuel system, gasoline); 06E010000 (steering).
Source: NHTSA complaints & recalls, EPA fueleconomy.gov. Data updated November 18, 2026. Complaints are unverified reports by owners.