CarProblemsDB

2011 Ford Crown Victoria problems, recalls & MPG

NHTSA has received 25 complaints from owners of the 2011 Ford Crown Victoria, most often about the steering. There are 2 safety recalls for this model year. The EPA rates it at about 19 MPG combined.

6.8out of 10
Our verdict
Average
  • More complaints than 46% of 2011 vehicles
  • Most reported problem: steering (56% of complaints)
  • 2 safety recalls
  • 1 crash reported
How we score
Complaints25
Recalls2
MPG combined19
Safety—

Most reported 2011 Ford Crown Victoria problems

Owner complaints filed with NHTSA, grouped by problem area. One complaint can mention several areas.

Steering14 (56%)
Seats4 (16%)
Suspension4 (16%)
Engine & cooling3 (12%)
Transmission & powertrain2 (8%)
Body & structure1 (4%)
Brakes1 (4%)
Electrical system1 (4%)
Exterior lighting1 (4%)
Other / unknown1 (4%)
Visibility, windows & wipers1 (4%)
Wheels1 (4%)

When owners reported problems

12011
72012
42013
12014
12017
12018
12019
22020
22021
22023
12025
22026

Complaints by the year they were filed.

Recent owner complaints

Nov 16, 2026steering
I own a 2011 Ford Crown Victoria police interceptor with an outstanding safety recall, Ford 13s08 (NHTSA 13v385000), involving corrosion of the lower intermediate steering shaft and potential loss of steering control. My vehicle is experiencing steering binding and inconsistent resistance, becoming excessively tight or loose depending on the steering wheel’s position. This… Read more

I own a 2011 Ford Crown Victoria police interceptor with an outstanding safety recall, Ford 13s08 (NHTSA 13v385000), involving corrosion of the lower intermediate steering shaft and potential loss of steering control. My vehicle is experiencing steering binding and inconsistent resistance, becoming excessively tight or loose depending on the steering wheel’s position. This presents a serious safety concern. On xxx, I brought my vehicle to bonnell Ford in [xxx] for the recall. The dealership ordered a part and scheduled the repair for xxx after leaving my vehicle for several hours on xxx I was informed that bonnell could not perform the repair because it lacked the required specialized equipment. The service manager stated that other Ford dealerships and a regional representative had been contacted, but nobody in [xxx] could locate the equipment. I opened a repair assistance case with Ford corporate. Rather than arranging a solution, Ford representatives instructed me to contact other dealerships myself or pursue repairs at my own expense. On xxx, I contacted Ford again. Despite speaking with multiple representatives, including level 2, no solution was provided. When I requested a supervisor, the level 2 representative accused me of potentially “holding her line hostage” and stated that a supervisor callback would take 24–48 hours. My vehicle remains unrepaired, with no confirmed repair location, timeline, or alternative remedy. I am requesting NHTSA investigate Ford’s f

NHTSA complaint #11778439
Nov 2, 2026steering
Ford is refusing to honor the 14s25 recall. The recall was completed xxx9. The part appears to be the same and research supports this. How does replacing the same faulty part solve the problem? How is that considered a repair? "on your vehicle, it may be possible that the upper intermediate steering shaft was serviced incorrectly during previous repairs for safety recall… Read more

Ford is refusing to honor the 14s25 recall. The recall was completed xxx9. The part appears to be the same and research supports this. How does replacing the same faulty part solve the problem? How is that considered a repair? "on your vehicle, it may be possible that the upper intermediate steering shaft was serviced incorrectly during previous repairs for safety recall 13s08 or regional program 13r01." - I take it as the recall was serviced incorrectly since one can be mistaken it wasn't serviced at all. Regardless, this is a safety issue and it is unacceptable it is being ignored considering no improvements were made to the design. What difference does it make replacing the part with another faulty part two years after manufacture when now the car is 15 years old? The part is certainly in worse condition now and I fear the safety of highway travel going forward. Ford doesn't seem to have any compassion. Please let me know if you would like photos to be sent in. I am willing to provide images of the corroded part that can fail anytime soon. NHTSA bulletin: [xxx] information redacted pursuant to the freedom of information act (foia), 5 u.s.c. 552(b)(6)

NHTSA complaint #11775187
Mar 11, 2025power train, electrical system, engineCrash

Unknown

NHTSA complaint #11647631
Apr 28, 2023steering
I learned of recall on some models of Crown Victoria police interceptor. I own 3 such vehicles. Two were identified for recall, the third a 2011 however was not. This car has signs of steering issues very hard to turn the wheel at times. There is rust on the lower intermediate steering shaft and at the u joints of the shaft. When I took the other vehicles in for recall… Read more

I learned of recall on some models of Crown Victoria police interceptor. I own 3 such vehicles. Two were identified for recall, the third a 2011 however was not. This car has signs of steering issues very hard to turn the wheel at times. There is rust on the lower intermediate steering shaft and at the u joints of the shaft. When I took the other vehicles in for recall servicing I provided the VIN # for the 2011 and was informed that there was no recall for it. I am hoping that the recall can be expanded to include this vehicle which is showing some signs of steering shaft issues.

NHTSA complaint #11519486
Apr 28, 2023steering

Vehicle is exhibiting stiff steering issues associated with steering column. Mechanic determined steering shaft requires replacement. This vehicle was already involved in a steering column recall several years ago however the problem appears to have returned.

NHTSA complaint #11519396
Aug 6, 2021steering
The contact owns a 2011 Ford Crown Victoria. The contact stated while driving 40 MPH, the steering wheel started clicking and making an abnormal popping sound. The contact stated that the steering wheel was difficult to maneuver. There was no warning light illuminated. The contact stated he was able to continue to drive the vehicle. The vehicle was taken to the dealer who… Read more

The contact owns a 2011 Ford Crown Victoria. The contact stated while driving 40 MPH, the steering wheel started clicking and making an abnormal popping sound. The contact stated that the steering wheel was difficult to maneuver. There was no warning light illuminated. The contact stated he was able to continue to drive the vehicle. The vehicle was taken to the dealer who diagnosed that the intermediate steering shaft needed to be replaced. The manufacturer was made aware of the failure and advised the contact that the VIN was not included in NHTSA campaign number: 14v704000 (steering) or 13v385000 (steering). The vehicle was not repaired. The approximate failure mileage was 160,000.

NHTSA complaint #11428047
Jan 14, 2021steering
Tl* the contact owns a 2011 Ford Crown Victoria. The contact stated that while driving at speeds above 60 MPH, the front end would vibrate and a clunking noise was present coming from the steering column. Eventually the steering column would not lock after parking the vehicle. The vehicle was taken to an independent mechanic who diagnosed that the lower steering shaft bearing… Read more

Tl* the contact owns a 2011 Ford Crown Victoria. The contact stated that while driving at speeds above 60 MPH, the front end would vibrate and a clunking noise was present coming from the steering column. Eventually the steering column would not lock after parking the vehicle. The vehicle was taken to an independent mechanic who diagnosed that the lower steering shaft bearing was faulty. The vehicle was not repaired. The local dealer rye Ford located at 1151 boston post rd, rye, ny 10580 and the manufacturer were notified. The contact was informed that the vehicle was not included in NHTSA campaign number: 13v385000 (steering). The contact stated that the vehicle had experienced the same failure listed in the recall. The failure mileage was 82,000.

NHTSA complaint #11388103
Jul 13, 2020visibility/wiper

Lower rear window defroster tab disconnects from glass, and does not stay permanently attached.

NHTSA complaint #11338977

2011 Ford Crown Victoria recalls (2)

Recall 14V7040002014Steering:rack and pinion:pinion shaft

Ford motor company (Ford) is recalling certain model year 2005-2011 Ford Crown Victoria, 2005-2011 mercury grand marquis vehicles manufactured march 23, 2004, to august 30, 2011, and 2005-2011 lincoln town car vehicles manufactured march 8, 2004, to august 30, 2011, and on which the upper intermediate shaft was serviced during the course of safety recall 13v-385. The prior repairs may not have been correctly performed.

Risk: Improper servicing of the upper intermediate shaft could cause the shaft to separate, which can then result in a loss of steering control, and increasing the risk of a crash.

Remedy: Ford will notify the owners of vehicles whose repair records reflect that the upper intermediate steering shaft was repaired during the course of the prior recall 13v-385. Dealers will inspect and replace the upper immediate shaft if necessary free of charge. The recall began november 17, 2014. Owners may contact ford customer service at 1-866-436-7332. Ford's number for this recall is 14s25.

Recall 13V3850002013Steering

Ford is recalling certain model year 2005-2011 Ford Crown Victoria (including Crown Victoria police interceptors), mercury grand marquis, and lincoln town car vehicles. The affected vehicles are currently registered or were originally sold in connecticut, delaware, the district of columbia, illinois, indiana, iowa, kentucky, maine, maryland, massachusetts, michigan, minnesota, missouri, new hampshire, new jersey, new york, ohio, pennsylvania, rhode island, vermont, virginia, west virginia, and wisconsin. Severe corrosion can seize the lower intermediate shaft which may cause the upper intermediate shaft to collapse and the steering column lower bearing to separate.

Risk: If the lower bearing separates, the vehicle may experience a loss of steering, increasing the risk of a crash.

Remedy: Ford will notify owners and dealers will replace the lower intermediate shaft, free of charge. The upper intermediate shaft and steering column lower bearing will be inspected to identify any damage that may have occurred as a result of lower intermediate shaft corrosion, and repaired or replaced as necessary. If the steering column lower bearing has separated, a retainer clip will be installed. The recall began on october 23, 2013. Owners may contact ford at 1-866-436-7332. Ford's recall number is 13s08.

Fuel economy (EPA)

EngineTransmissionDriveCityHwyComb.
4.6L 8-cylAutomatic 4-spdRear-Wheel Drive162419

Crash-test ratings (NHTSA)

VersionOverallFrontalSideRollover
2011 Ford Crown Victoria 4 DR RWD———★★★★★

Other Ford Crown Victoria years

Frequently asked questions

Is the 2011 Ford Crown Victoria a reliable car?

Our score for the 2011 Ford Crown Victoria is 6.8/10 (average). It is based on 25 owner complaints and 2 recalls compared with other 2011 vehicles and other Ford Crown Victoria years.

What are the most common problems with the 2011 Ford Crown Victoria?

Owners most often report problems with steering (14 complaints), seats (4 complaints), suspension (4 complaints).

How many recalls does the 2011 Ford Crown Victoria have?

2 recalls are on file with NHTSA, including: 14V704000 (steering:rack and pinion:pinion shaft); 13V385000 (steering).

What gas mileage does the 2011 Ford Crown Victoria get?

The EPA rates the 2011 Ford Crown Victoria at about 16 MPG city, 24 MPG highway and 19 MPG combined, depending on engine and drivetrain.

Source: NHTSA complaints & recalls, EPA fueleconomy.gov. Data updated November 18, 2026. Complaints are unverified reports by owners.