CarProblemsDB

2010 BMW R 1200 RT problems, recalls & MPG

NHTSA has received 5 complaints from owners of the 2010 BMW R 1200 RT, most often about the fuel & propulsion system. There are 2 safety recalls for this model year.

8.3out of 10
Our verdict
Good choice
  • More complaints than 15% of 2010 vehicles
  • Most reported problem: fuel & propulsion system (80% of complaints)
  • 2 safety recalls
How we score
Complaints5
Recalls2
MPG combined—
Safety—

Most reported 2010 BMW R 1200 RT problems

Owner complaints filed with NHTSA, grouped by problem area. One complaint can mention several areas.

Fuel & propulsion system4 (80%)
Electrical system1 (20%)
Transmission & powertrain1 (20%)

When owners reported problems

12015
12017
12019
12020
12026

Complaints by the year they were filed.

Recent owner complaints

Aug 30, 2026fuel/propulsion system
I own a 2010 BMW r1200rt motorcycle. The motorcycle was subject to BMW’s fuel-pump recall, and the recall repair was performed in 2014. The motorcycle has now developed a crack in the fuel-pump flange at the base of the female quick-disconnect fuel fitting. The crack is allowing gasoline to leak under pressure. The motorcycle has the metal reinforcement ring associated with… Read more

I own a 2010 BMW r1200rt motorcycle. The motorcycle was subject to BMW’s fuel-pump recall, and the recall repair was performed in 2014. The motorcycle has now developed a crack in the fuel-pump flange at the base of the female quick-disconnect fuel fitting. The crack is allowing gasoline to leak under pressure. The motorcycle has the metal reinforcement ring associated with the previous recall repair. This failure is particularly concerning because the fuel-pump flange and quick-disconnect area were the subject of BMW’s previous safety recall involving cracking and fuel leakage. I understand that my motorcycle may not currently be listed as subject to BMW’s later 20v-471 recall because of the repair performed in 2014. However, I am reporting this as a new safety defect because the fuel-pump/flange assembly has now failed again and is leaking gasoline. I am concerned that a previously recalled and repaired fuel-system component has developed another crack in the same critical area, creating a potential fire hazard. I have photographs documenting the crack, the metal reinforcement ring, and the component markings. I can provide the photographs and the 2014 repair documentation. I request that NHTSA document this complaint and review whether this represents a continuing or recurring safety defect involving the BMW r1200rt fuel-pump flange and quick-disconnect fitting.

NHTSA complaint #11760800
Sep 19, 2020fuel/propulsion system
I have a 2010, r1200rt motorcycle that is spraying large amounts of atomized gas out from the top of the plastic fuel pump housing from a hairline crack near the high pressure outlet. The housing is a non wear part. In looking at the recalls I see that on december 12, 2013 there was a recall campaign (NHTSA # 13v617000) on fuel leaks for my motorcycle that describes my issue… Read more

I have a 2010, r1200rt motorcycle that is spraying large amounts of atomized gas out from the top of the plastic fuel pump housing from a hairline crack near the high pressure outlet. The housing is a non wear part. In looking at the recalls I see that on december 12, 2013 there was a recall campaign (NHTSA # 13v617000) on fuel leaks for my motorcycle that describes my issue exactly. I requested that BMW take action and fix the problem free of charge. They have refused. I believe that their scope analysis of the vins with this problem was too narrow. I see that I will now be the 4th complaint filed this year and is a pattern that needs addressed. When this happens, there is a very dangerous situation of a fire developing while people are driving or stopped. This is not a situation where someone can separate themselves from the flash fire while driving. It's effects (burns, losing control) are instant to the motorcycle driver.

NHTSA complaint #11360019
May 28, 2019fuel/propulsion system
The fuel gauge misread the actual amount of fuel in my tank causing me to run out of gas at a dangerous intersection. I had to get off the motorcycle and push it across oncoming traffic (the only downhill option) to a safe place on the side of the road. I had to walk for 2 miles to purchase a gas can and fuel in order to restart and move the bike. This was the first time my… Read more

The fuel gauge misread the actual amount of fuel in my tank causing me to run out of gas at a dangerous intersection. I had to get off the motorcycle and push it across oncoming traffic (the only downhill option) to a safe place on the side of the road. I had to walk for 2 miles to purchase a gas can and fuel in order to restart and move the bike. This was the first time my gas gauge failed. The sensor for the gas gauge has now failed 3 times. The second time I was able to coast up a driveway hill into a safe church parking lot. This was so lucky as no shoulder was available. Recently, the third time it failed I noticed the fuel gage was actually going up as I was operating the vehicle. It went from 1/2 tank to almost full. The fuel strip (fuel sensor) in the gas tank is the root cause of failure. I now have the 3rd fuel strip replacement scheduled for 7/12/2019. If I run out of fuel in the middle of a highway during a rush hour time period, I could literally be killed (example: I live in atlanta and have been in rush hour on I-75 / I-285 which is about 8-9 lanes wide with tight and fast moving cars and trucks). The fuel tank on the 2010 BMW R 1200 RT does not have an emergency fuel reserve petcock. If the fuel gauge overstates the remaining fuel, and the bike runs out of fuel, there is no available reserve. There is no safety margin. I just purchased a fuel bottle to carry on the motorcycle for an emergency. I do not like the idea of carrying fuel I

NHTSA complaint #11210483
Feb 7, 2017electrical system, fuel/propulsion system

Fuel gauge failure common problem on this motorcycle gauge failed while travling.

NHTSA complaint #10949999
Apr 9, 2015power train
As many other BMW owners have experienced, I experienced a failure of the final drive (rear end). I ended a short trip and became aware of high heat coming from the rear axle. I trailered it to the dealership where I was informed it was a final drive failure, worn bearings and a wobbly rear wheel. They informed me it was a dry park requiring no mx on my part and could offer… Read more

As many other BMW owners have experienced, I experienced a failure of the final drive (rear end). I ended a short trip and became aware of high heat coming from the rear axle. I trailered it to the dealership where I was informed it was a final drive failure, worn bearings and a wobbly rear wheel. They informed me it was a dry park requiring no mx on my part and could offer no explanation for its premature failure. Upon my web research, the "dreaded final drive failure" immediately pops up on many sites and one suggested I file a complaint here. *tr

NHTSA complaint #10704743

2010 BMW R 1200 RT recalls (2)

Recall 15V1410002015Wheels:lugs/nuts/bolts/studs

BMW of north america, llc (BMW) is recalling certain model year 2005-2010 r1200gs and r1200rt, 2006-2010 r1200gs adventure, 2007-2010 r1200r, 2007 r1200s and k1200r sport, 2005-2007 r1200st, 2008-2009 hp2 megamoto, 2006 hp2 enduro, 2008-2010 hp2 sport, 2005-2008 k1200s, 2006-2008 k1200r, k1200gt, 2009-2011 k1300s, 2010-2011 k1300r, and 2009-2010 k1300gt motorcycles. In the affected motorcycles, the rear wheel mounting flange may crack if the rear wheel mounting bolts are over tightened.

Risk: If the rear wheel mounting flange cracks, the mounting bolts may loosen and the rear wheel may not remain secured to the motorcycle, causing a loss of stability and increasing the risk of a crash.

Remedy: Bmw will notify owners, and dealers will replace the existing aluminum rear wheel flange with a steel one, free of charge. The recall began on may 7, 2015. Owners may contact bmw customer service at 1-800-525-7417.

Recall 13V6170002013Fuel system, gasoline:delivery:fuel pump

BMW of north america, llc (BMW) is recalling certain model year 2005-2011 model year r-model motorcycles, model year 2005-2012 k-model motorcycles, model year 2010-2011 s 1000 model motorcycles, and model year 2006-2010 hp2 motorcycles. In the affected motorcycles, the fuel pump flange (and the auxiliary fuel pump flange if equipped) could develop cracks and leak fuel.

Risk: A fuel leak in the presence of an ignition source may result in a fire.

Remedy: Bmw will notify owners, and dealers will either reinforce the fuel pump flange or replace the pump, as necessary, free of charge. The recall began on april 16, 2014. Owners may contact bmw customer relations at 1-800-525-7417 or email bmw at [email protected].

Other BMW R 1200 RT years

Frequently asked questions

Is the 2010 BMW R 1200 RT a reliable car?

Our score for the 2010 BMW R 1200 RT is 8.3/10 (good choice). It is based on 5 owner complaints and 2 recalls compared with other 2010 vehicles and other BMW R 1200 RT years.

What are the most common problems with the 2010 BMW R 1200 RT?

Owners most often report problems with fuel & propulsion system (4 complaints), electrical system (1 complaints), transmission & powertrain (1 complaints).

How many recalls does the 2010 BMW R 1200 RT have?

2 recalls are on file with NHTSA, including: 15V141000 (wheels:lugs/nuts/bolts/studs); 13V617000 (fuel system, gasoline:delivery:fuel pump).

Source: NHTSA complaints & recalls, EPA fueleconomy.gov. Data updated November 18, 2026. Complaints are unverified reports by owners.