CarProblemsDB

2008 BMW R 1200 RT problems, recalls & MPG

NHTSA has received 9 complaints from owners of the 2008 BMW R 1200 RT, most often about the fuel & propulsion system. There are 3 safety recalls for this model year.

8out of 10
Our verdict
Good choice
  • More complaints than 19% of 2008 vehicles
  • Most reported problem: fuel & propulsion system (67% of complaints)
  • 3 safety recalls
How we score
Complaints9
Recalls3
MPG combined—
Safety—

Most reported 2008 BMW R 1200 RT problems

Owner complaints filed with NHTSA, grouped by problem area. One complaint can mention several areas.

Fuel & propulsion system6 (67%)
Brakes1 (11%)
Transmission & powertrain1 (11%)
Wheels1 (11%)

When owners reported problems

32012
12013
12014
12015
22021
12022

Complaints by the year they were filed.

Recent owner complaints

Apr 12, 2022fuel/propulsion system
The bike is a 2008 BMW r1200rt. The throttle bodies for each cylinder has a plastic cam that is the point of attachment for the throttle cable. That plastic cam broke and completely detached from the bike. I was accelerating to merge into traffic on interstate 64e at corydon, in. Once established in the right lane, the bike suddenly lost power and slowed rapidly while I was… Read more

The bike is a 2008 BMW r1200rt. The throttle bodies for each cylinder has a plastic cam that is the point of attachment for the throttle cable. That plastic cam broke and completely detached from the bike. I was accelerating to merge into traffic on interstate 64e at corydon, in. Once established in the right lane, the bike suddenly lost power and slowed rapidly while I was approached from the rear by a tractor trailer that had to apply brakes and continuously sounded his horn while abruptly maneuvering to the left lane to avoid me while I was attempting to assess what had just happened. This is a critical safety component and its failure has been documented countless number of times on various owner's group forums for this type of bike. One of which is linked here: https://www.bmwsporttouring.com/topic/91897-throttle-body-more-cracked-cable-camspulleys/ another: https://forums.bmwmoa.org/showthread.php?76036-broken-throttle-body-pulleys-2009-r1200rt/page5 it is apparent the plastic that this throttle body cam is made from deteriorates rapidly causing a significant safety risk. There are aftermarket replacements that are made from aluminum, but they are very expensive. I am asking for a safety recall and that BMW be made to replace these parts with a metal or a material that is less prone to failure.

NHTSA complaint #11460528
Aug 24, 2021fuel/propulsion system

My forth vehicle with throttle body cams that are cracked and broken on both sides. No symptoms or warning lights of a problem that could have lead to a catastrophic failure, total engine propulsion failure, breakdown. My safety and others were in danger of injury or death. Dealer has confirmed and repaired all vehicles.

NHTSA complaint #11430262
Jul 4, 2021fuel/propulsion system
This is a two-cylinder engine with an independent throttle body for each cylinder. The throttle is actuated by a cable and pulley which rotate the throttle plate on a shaft. The pulley is attached to the shaft with molded plastic. Upon inspection during service, both plastic moldings (both cylinders) were discovered to be cracked and near failure. Failure of this part will… Read more

This is a two-cylinder engine with an independent throttle body for each cylinder. The throttle is actuated by a cable and pulley which rotate the throttle plate on a shaft. The pulley is attached to the shaft with molded plastic. Upon inspection during service, both plastic moldings (both cylinders) were discovered to be cracked and near failure. Failure of this part will cause that cylinder to go to idle power. If the vehicle is in motion, there will be a sudden loss of power, and high vibration until the throttle is closed. Until repair, the motorcycle will be inoperable. This has become a known defect with this series of motorcycles. I repaired mine using an aftermarket aluminum part created to address this problem. Parts cost was $458.

NHTSA complaint #11423380
May 18, 2015wheels

Tl* the contact owns a 2008 BMW R 1200 RT motorcycle. The contact received notification of NHTSA campaign number: 15v141000 (wheels); however, the manufacturer and dealer refused to honor the remedy which mentioned the replacement of the aluminum rear wheel flange with a steel one. The dealer only wanted to inspect the vehicle. The manufacturer was notified of the issue. The contact had not experienced a failure.

NHTSA complaint #10717107
Jan 2, 2014service brakes

The ABS and rear braking system failed. This was indicated by an instrument panel red warning light, "brake failure". As a result of this failure, the rear wheel brake did not operate as designed (integral brakes) and the ABS system was non-functional. The scanned codes state that the power supply to pump motor is faulty. *tr

NHTSA complaint #10558201
Feb 23, 2013fuel/propulsion system

Fuel gauge failed, warning light constantly on. Bike could run out of fuel in traffic with no warning causing dangerous situation. *tr

NHTSA complaint #10499754
Feb 8, 2012power train
I am writing in response to your investigation concerning BMW motorcycle final drive failures and wish provide supporting information. I have a 2008 BMW r1200rt (VIN [xxx]) in which the final drive developed significant roughness in the rear wheel rotation and pronounced rumbling noise at highway speeds at about 22,000 miles (early 2011). I continued to operate the motorcycle… Read more

I am writing in response to your investigation concerning BMW motorcycle final drive failures and wish provide supporting information. I have a 2008 BMW r1200rt (VIN [xxx]) in which the final drive developed significant roughness in the rear wheel rotation and pronounced rumbling noise at highway speeds at about 22,000 miles (early 2011). I continued to operate the motorcycle until 23, 400 miles at which point I contacted BMW USA and my local dealer (august 2011). As my motorcycle was a few months out of warranty, neither organization was particularly helpful. It should be noted the final drive lubrication was changed at 12,000 and 18,000 miles service intervals. No metal shavings noted when the oil was drained. At no time was final drive oil leakage evident. Being a mechanically capable individual, I elected to diagnose and repair the final drive myself. I dismantled the final drive and inspected the crown wheel bearing. I discovered significant roughness in the bearings rotation. Further, I cut the bearing apart to determine the cause of the roughness. The inside of the bearing still contained grease and there was no evidence of final drive oil leakage into the bearing itself. After cleaning away the grease, I examined the bearings races and ball bearings. I noted significant pitting and metal galling on the balls and bearing races. I replaced the failed bearing with a new bearing and replaced the seals. Total part cost was approximately $200. I fabricated the

NHTSA complaint #10447160
Jan 30, 2012fuel system, gasoline

Cracked fuel pump inlet bushing. *tt

NHTSA complaint #10445954

2008 BMW R 1200 RT recalls (3)

Recall 15V1410002015Wheels:lugs/nuts/bolts/studs

BMW of north america, llc (BMW) is recalling certain model year 2005-2010 r1200gs and r1200rt, 2006-2010 r1200gs adventure, 2007-2010 r1200r, 2007 r1200s and k1200r sport, 2005-2007 r1200st, 2008-2009 hp2 megamoto, 2006 hp2 enduro, 2008-2010 hp2 sport, 2005-2008 k1200s, 2006-2008 k1200r, k1200gt, 2009-2011 k1300s, 2010-2011 k1300r, and 2009-2010 k1300gt motorcycles. In the affected motorcycles, the rear wheel mounting flange may crack if the rear wheel mounting bolts are over tightened.

Risk: If the rear wheel mounting flange cracks, the mounting bolts may loosen and the rear wheel may not remain secured to the motorcycle, causing a loss of stability and increasing the risk of a crash.

Remedy: Bmw will notify owners, and dealers will replace the existing aluminum rear wheel flange with a steel one, free of charge. The recall began on may 7, 2015. Owners may contact bmw customer service at 1-800-525-7417.

Recall 13V6170002013Fuel system, gasoline:delivery:fuel pump

BMW of north america, llc (BMW) is recalling certain model year 2005-2011 model year r-model motorcycles, model year 2005-2012 k-model motorcycles, model year 2010-2011 s 1000 model motorcycles, and model year 2006-2010 hp2 motorcycles. In the affected motorcycles, the fuel pump flange (and the auxiliary fuel pump flange if equipped) could develop cracks and leak fuel.

Risk: A fuel leak in the presence of an ignition source may result in a fire.

Remedy: Bmw will notify owners, and dealers will either reinforce the fuel pump flange or replace the pump, as necessary, free of charge. The recall began on april 16, 2014. Owners may contact bmw customer relations at 1-800-525-7417 or email bmw at [email protected].

Recall 10V2760002010Service brakes, hydraulic

BMW is recalling certain model year 2007 through 2009 r 1200 and k 1200 series motorcycles manufactured from august 2006 through may 2009. Due to the current routing of the front brake lines, it is possible that during riding, and therefore associated vibration. The brake lines could be under strain. If the vibration/strain is significant, the brake line could split and start to develop a leak.

Risk: If this goes unnoticed, and the brake fluid reservoir runs empty, the front brakes could fail, increasing the risk of a crash.

Remedy: Bmw will notify owners and dealers will install new brake lines, containing a "sleeve" along a portion of the lines free of charge. The safety recall began on september 20, 2010. Owners may contact bmw at 1-800-525-7417.

Other BMW R 1200 RT years

Frequently asked questions

Is the 2008 BMW R 1200 RT a reliable car?

Our score for the 2008 BMW R 1200 RT is 8/10 (good choice). It is based on 9 owner complaints and 3 recalls compared with other 2008 vehicles and other BMW R 1200 RT years.

What are the most common problems with the 2008 BMW R 1200 RT?

Owners most often report problems with fuel & propulsion system (6 complaints), brakes (1 complaints), transmission & powertrain (1 complaints).

How many recalls does the 2008 BMW R 1200 RT have?

3 recalls are on file with NHTSA, including: 15V141000 (wheels:lugs/nuts/bolts/studs); 13V617000 (fuel system, gasoline:delivery:fuel pump); 10V276000 (service brakes, hydraulic).

Source: NHTSA complaints & recalls, EPA fueleconomy.gov. Data updated November 18, 2026. Complaints are unverified reports by owners.