CarProblemsDB

2008 Toyota Highlander Hybrid problems, recalls & MPG

NHTSA has received 197 complaints from owners of the 2008 Toyota Highlander Hybrid, most often about the brakes. There are 8 safety recalls for this model year. The EPA rates it at about 26 MPG combined.

1.8out of 10
Our verdict
Avoid this year
  • More complaints than 79% of 2008 vehicles
  • Most reported problem: brakes (58% of complaints)
  • 8 safety recalls
  • 6 crashes, 4 fires, 5 injuries reported
How we score
Complaints197
Recalls8
MPG combined26
Safety—

Most reported 2008 Toyota Highlander Hybrid problems

Owner complaints filed with NHTSA, grouped by problem area. One complaint can mention several areas.

Brakes115 (58%)
Tires9 (5%)
Steering6 (3%)
Body & structure5 (3%)
Wheels3 (2%)
Airbags2 (1%)
Visibility, windows & wipers2 (1%)
Equipment1 (1%)
Seat belts1 (1%)
Suspension1 (1%)

When owners reported problems

32008
72009
362010
22011
92012
172013
82014
82015
212016
312017
422018
102019
12021
22025

Complaints by the year they were filed.

Recent owner complaints

Aug 12, 2025electrical system

Odometer fraud. The contact purchased a 2008 Toyota Highlander Hybrid. The contact stated that it was discovered that there was a mileage discrepancy. The vehicle was a private sale. At the time of purchase, the vehicle mileage was 92,000, and at the time of registration, it was discovered that the mileage was 212,000.

NHTSA complaint #11680234
Apr 15, 2025service brakes, hydraulic
The contact owns a 2008 Toyota Highlander Hybrid. The contact stated that while driving on several occasions at various speeds, the master, brake system, ABS warning, and traction control warning lights illuminated. Additionally, the message "brake system malfunction - stop in safe place immediately”, check ABS/vsc system, and check braking system" messages were displayed. The… Read more

The contact owns a 2008 Toyota Highlander Hybrid. The contact stated that while driving on several occasions at various speeds, the master, brake system, ABS warning, and traction control warning lights illuminated. Additionally, the message "brake system malfunction - stop in safe place immediately”, check ABS/vsc system, and check braking system" messages were displayed. The vehicle was taken to an independent mechanic several times, but was not diagnosed. The manufacturer was notified of the failure. The failure mileage was approximately 227,000.

NHTSA complaint #11654687
Dec 1, 2021service brakes, hydraulic, service brakes, air
The contact owns a 2008 Toyota Highlander Hybrid. The contact stated while driving 45 MPH, the brake malfunction and ABS warning lights were illuminated. The contact stated that when she started the vehicle, she was unable to depress the brake pedal to the floor and started to hear an abnormal noise. The contact called the local dealer and made them aware of the failure. The… Read more

The contact owns a 2008 Toyota Highlander Hybrid. The contact stated while driving 45 MPH, the brake malfunction and ABS warning lights were illuminated. The contact stated that when she started the vehicle, she was unable to depress the brake pedal to the floor and started to hear an abnormal noise. The contact called the local dealer and made them aware of the failure. The contact took the vehicle to an independent mechanic and was informed that the brake booster pump assembly and brake actuator assembly needed to be replaced. The vehicle was not diagnosed or repaired. The manufacturer had been informed of the failure. The failure mileage was approximately 162,000.

NHTSA complaint #11442260
Aug 15, 2019hybrid propulsion system
Tl* the contact owns a 2008 Toyota Highlander Hybrid. The contact received a recall notice for NHTSA campaign number: 13v396000 (hybrid propulsion system: inverter). While in a parking lot, the vehicle went into fail safe limp home mode and the vehicle stalled. There were no warning indicators illuminated. The vehicle was towed to newark Toyota world (230 e cleveland ave,… Read more

Tl* the contact owns a 2008 Toyota Highlander Hybrid. The contact received a recall notice for NHTSA campaign number: 13v396000 (hybrid propulsion system: inverter). While in a parking lot, the vehicle went into fail safe limp home mode and the vehicle stalled. There were no warning indicators illuminated. The vehicle was towed to newark Toyota world (230 e cleveland ave, newark, de 19711, (302) 368-6262) to be diagnosed, but the failure could not be duplicated. Additionally, diagnostic testing would cost $600. The vehicle was not diagnosed or repaired. The manufacturer was not contacted. The failure mileage was 185,000.

NHTSA complaint #11244155
May 29, 2019service brakes
All warning lights are on to check brakes, ABS. Abnormal leak in acumulator - ABS brake actuator needs to be replaced. I was sent a recall on this problem with my 2012 prius (although it is fine) but the highlander has the exact problem. When googling this I found many 2008 highlanders with the exact same problem. Toyota wants $3600 to replace the ABS acumulator yet they… Read more

All warning lights are on to check brakes, ABS. Abnormal leak in acumulator - ABS brake actuator needs to be replaced. I was sent a recall on this problem with my 2012 prius (although it is fine) but the highlander has the exact problem. When googling this I found many 2008 highlanders with the exact same problem. Toyota wants $3600 to replace the ABS acumulator yet they will replace the same part in the prius as a recall.

NHTSA complaint #11210604
May 22, 2019electrical system, electronic stability control (esc), service brakes

Brake actuator assembly on my 2008 Toyota Highlander Hybrid has been failing. Know issue. I've taken excellent care of this vehicle and had it serviced at the dealership. The manufacturing is replace the previous years, but not the 2008 which is the exact same component. Please let me know why this is happening. Not just to me, but others too. Please help us. Thanks

NHTSA complaint #11209225
May 6, 2019steering, service brakes
ABS pump and actuator failure. Warning lights on the dash buzzer, and nearly complete loss of stopping power, reduced fuel economy. We own a 2008 Toyota Highlander Hybrid which confirmed by the dealer has a 100% failure rate which is the exact failure previously recalled on 2006-07 highlander hybrids, and 08-09 camry hybrids. This failure throws the same code, same symptoms,… Read more

ABS pump and actuator failure. Warning lights on the dash buzzer, and nearly complete loss of stopping power, reduced fuel economy. We own a 2008 Toyota Highlander Hybrid which confirmed by the dealer has a 100% failure rate which is the exact failure previously recalled on 2006-07 highlander hybrids, and 08-09 camry hybrids. This failure throws the same code, same symptoms, same parts as recalled on previous years, and same years in other models however Toyota some how got away with not recalling 2008 highlander models. This is well documented on this site, consumer affairs and tons of other sites on the internet. I would like to see the government step in and force Toyota to extend there warranty and recall these models. Toyota, there dealers and the public are very much aware of how shady Toyota has been not honoring different years with the same part. This repair is on average $3k dollars.

NHTSA complaint #11205787
Mar 26, 2019service brakes

I am told I need to replace the brake actuator assembly on my 2008 Toyota Highlander Hybrid. My research indicates that this component failure was a known problem for years and was actually covered in a recall for 2006-7 models. For reasons unknown the recall does not cover 2008 even though it is the exact same component. This is a serious safety issue and Toyota seems to be passing the cost off to the consumer.

NHTSA complaint #11191596

2008 Toyota Highlander Hybrid recalls (8)

Recall 15V6890002015Visibility:power window devices and controls

Toyota motor company (Toyota) is recalling certain model year 2009-2011 tundra, sequoia, corolla, corolla matrix and scion xb, 2008-2011 highlander and Highlander Hybrid, 2007 camry and camry hybrid, 2009 camry and camry hybrid, 2006-2011 rav4, 2006-2010 yaris, and 2009-2010 scion xd and pontiac vibe vehicles. During the manufacturing of the power window master switch (pwms), grease lubricant may have been inconsistently applied to the sliding electrical contacts.

Risk: If the sliding electrical contacts are not protected by lubricant, debris and moisture that get into the switch may cause a short circuit and the switch assembly may overheat and melt, increasing the risk of a fire.

Remedy: Toyota will notify owners, and dealers will inspect the switch, applying a lubricant if no abnormality is found. If abnormality is found, the pwms circuit board will be replaced, free of charge. The recall is expected to begin december 20, 2015. Owners may contact toyota customer service at 1-800-331-4331. Toyota's number for this recall is c0m.

Recall 13V3960002013Hybrid propulsion system: inverter

Toyota is recalling certain model year 2006-2010 Highlander Hybrid vehicles manufactured february 16, 2005, through july 29, 2010; and model year 2006-2008 lexus rx400h vehicles manufactured february 23, 2005, through december 2, 2008. The intelligent power module (ipm) inside the inverter module may contain transistors that have higher operating temperatures than the solder can support and the transistors may be heat damaged by the solder. If this occurs, various warning lamps, including the malfunction indicator lamp, slip indicator light, brake system warning light, and master warning light, will be illuminated on the instrument panel.

Risk: The vehicle may enter a fail-safe/limp-home mode that limits the drivability of the vehicle. It is possible that the hybrid system will shut down while the vehicle is being driven, causing the vehicle to stall unexpectedly, increasing the risk of a crash.

Remedy: Toyota will notify owners, and dealers will replace the ipm free of charge. Owners may contact toyota at 1-800-331-4331. Vehicles that had their ipm replaced under recall 11v-342 are not affected by this campaign.

Recall 12V4910002012Visibility:power window devices and controls

Toyota is recalling certain model year 2007-2009 camry, camry hybrid, rav4, corolla, corolla matrix, tundra, sequoia, highlander, Highlander Hybrid, yaris, scion xb, scion xd and pontiac vibe vehicles. The power window master switch assemblies in some of these vehicles were built using a less precise process for lubricating the internal components of the switch assemblies. Irregularities in this lubrication process may cause the power window master switch assemblies to malfunction and overheat.

Risk: If the switch overheats, it may melt, possibly resulting in a fire.

Remedy: Toyota will notify its owners, and dealers will inspect the switch and apply a special grease that inhibits heat build up or replace any switch damaged by the defect, free of charge. Toyota owners that experience a problem with a switch should not attempt to make repairs, but should contact their toyota dealer or the toyota customer experience center at 1-800-331-4331. General motors will contact the pontiac vibe owners affected by this recall and GM dealers will inspect and repair switches as necessary. Those owners may contact pontiac customer care at 1-800-762-2737.

Recall 11V2450002011Air bags

Toyota is recalling certain model year 2008 highlander, Highlander Hybrid, and model year 2007-2008 rav4 vehicles. In the curtain shield airbag (csa) system, there are two sensors in the airbag sensor assembly which are designed to detect vehicle roll angle. If one of these sensors malfunctions, the airbag warning light (malfunction indicator light: mil) will illuminate and the roll detection system will be suspended; however, the airbag csa remains available in the event of a side crash. If both sensors fail nearly simultaneously after initial airbag system check, the csa and the seat belt pretensioner could be inadvertently activated.

Risk: Inadvertent activation of the csa and/or the seat belt pretensioner can cause injury to a vehicle occupant.

Remedy: Toyota will replace the airbag sensor assembly with a new one containing improved roll rate sensors, free of charge. Toyota intends to send an interim owner notification to owners early to mid-may, 2011 when sufficient parts and remedy becomes available. Owners may contact toyota at 1-800-331-4331.

Recall 09V2230002009Equipment:other:labels

Toyota is recalling 27,080 model year 2005 through 2010 passenger cars built from september 1, 2005 to may 4, 2009. These vehicles were not equipped with load carrying capacity modification labels which fails to conform with the requirements of federal motor vehicle safety standard no. 110, "tire selection and rims."

Risk: Incorrect load carrying capacity modification labels could result in the vehicle being overloaded, increasing the risk of a crash.

Remedy: Toyota will notify owners and provide them with a new, accurate label to be installed over the inaccurate label free of charge. The safety recall began on august 18, 2009. Owners may contact toyota at 1-888-270-9371.

Southeast Toyota is recalling 3,499 stainless steel exhaust tips sold by southeast Toyota as an optional accessory for use on my 2008 highlander and highlander hybird vehicles. Due to improper heat treatment during the manufacturing process, the original clamp used to secure the stainless steel exhaust tip to the exhaust pipe may develop microscopic cracks. Eventually the crack may expand causing the clamp to break.

Risk: The original clamp and the toyota stainless steel exhaust tip may fall off the vehicle's exhaust pipe and become a road hazard which would increase the risk of a vehicle crash.

Remedy: Southeast toyota will notify owners and replace the clamp free of charge. The safety recall is expected to begin during may/june 2009. Owners may contact southeast toyota customer loyalty department at 1-800-301-6859.

Toyota is recalling 39,100 stainless steel exhaust tips sold by Toyota as an optional accessory for use on my 2008 highlander and Highlander Hybrid vehicles. Due to improper heat treatment during the manufacturing process, the original clamp used to secure the Toyota stainless steel exhaust tip to the exhaust pipe may develop microscopic cracks. Eventually the crack may expand causing the clamp to break.

Risk: The original clamp and the toyota stainless steel exhaust tip may fall off the vehicle's exhaust pipe and become a road hazard which would increase the risk of a vehicle crash.

Remedy: Toyota will notify owners and replace the clamp free of charge. The safety recall began on may 4, 2009. Owners may contact toyota customer experience center at 1 888-270-9371 monday through friday, 5:00 am to 6:00 pm, saturday 7:00 am through 4:00 pm pacific time.

Recall 08V1810002008Seat belts:rear/other

Toyota is recalling 90,189 my 2008 highlander and Highlander Hybrid passenger vehicles equipped with a third row seat. These vehicles fail to conform to the requirements of federal motor vehicle safety standard no. 208, "occupant crash protection." the non-driver designated seating positions (dsp) on these vehicles is equipped with seat belt assemblies that have a feature that converts the retractor from an emergency locking retractor (elr) to an automatic locking retractor (alr). The belts convert to the alr mode after the webbing has been fully withdrawn from the retractor. The system is designed so that as the belt is released into the retractor, the system remains in the alr mode so that a child restraint system (crs) can be tightly secured.

Risk: However, for the two third row dsp's on these vehicles, the alr mode deactivates before the webbing is fully retracted, so that it will not lock when certain rear-facing crs's that have a short seat belt routing path are installed in the vehicle. This can allow the seat belt webbing to spool out during normal driving maneuvers, which could affect the stability of a child restraint installed at those seating positions. As such, this could discourage the use of a child restraint and in the event of a crash, the child may not be adequately protected possibly resulting in injury.

Remedy: Dealers will install a newly designed seat belt component free of charge. The recall is expected to begin on or about december 18, 2008. Owners may contact toyota at 1-800-331-4331.

Fuel economy (EPA)

EngineTransmissionDriveCityHwyComb.
3.3L 6-cylAutomatic (variable gear ratios)4-Wheel or All-Wheel Drive272526

Crash-test ratings (NHTSA)

VersionOverallFrontalSideRollover
2008 Toyota Highlander Hybrid 4-DR. w/SAB———★★★★★

Other Toyota Highlander Hybrid years

Frequently asked questions

Is the 2008 Toyota Highlander Hybrid a reliable car?

Our score for the 2008 Toyota Highlander Hybrid is 1.8/10 (avoid this year). It is based on 197 owner complaints and 8 recalls compared with other 2008 vehicles and other Toyota Highlander Hybrid years.

What are the most common problems with the 2008 Toyota Highlander Hybrid?

Owners most often report problems with brakes (115 complaints), electrical system (35 complaints), stability control (25 complaints).

How many recalls does the 2008 Toyota Highlander Hybrid have?

8 recalls are on file with NHTSA, including: 15V689000 (visibility:power window devices and controls); 13V396000 (hybrid propulsion system: inverter); 12V491000 (visibility:power window devices and controls).

What gas mileage does the 2008 Toyota Highlander Hybrid get?

The EPA rates the 2008 Toyota Highlander Hybrid at about 27 MPG city, 25 MPG highway and 26 MPG combined, depending on engine and drivetrain.

Source: NHTSA complaints & recalls, EPA fueleconomy.gov. Data updated November 18, 2026. Complaints are unverified reports by owners.