CarProblemsDB

2003 Porsche 911 Turbo problems, recalls & MPG

NHTSA has received 13 complaints from owners of the 2003 Porsche 911 Turbo, most often about the engine & cooling. There are 3 safety recalls for this model year.

7.7out of 10
Our verdict
Good choice
  • More complaints than 23% of 2003 vehicles
  • Most reported problem: engine & cooling (100% of complaints)
  • 3 safety recalls
How we score
Complaints13
Recalls3
MPG combined—
Safety—

Most reported 2003 Porsche 911 Turbo problems

Owner complaints filed with NHTSA, grouped by problem area. One complaint can mention several areas.

Speed control (cruise, throttle)1 (8%)

When owners reported problems

12012
82013
32015
12017

Complaints by the year they were filed.

Recent owner complaints

Jan 3, 2017engine
While driving home from work in december 2015, on a local road near my home, the engine began emitting a large steam cloud behind the vehicle and the coolant level light appeared. I pulled over and there was a major coolant leak behind the car. I had the car taken to a shop, and they identified the issues as one of the coolant pipes had separated from the engine and dumped all… Read more

While driving home from work in december 2015, on a local road near my home, the engine began emitting a large steam cloud behind the vehicle and the coolant level light appeared. I pulled over and there was a major coolant leak behind the car. I had the car taken to a shop, and they identified the issues as one of the coolant pipes had separated from the engine and dumped all of the coolant on the road. In the attached image you can see the separated coolant pipe from the engine towards the back of the picture. Given the cost of repair, I had to wait until summer of 2016 to have the repair completed. *tr

NHTSA complaint #10939285
Sep 18, 2015engine

I was driving on the putnam park road course track on 9/12/15, and one of my coolant fittings broke loose from the defective Porsche adhesive. It spewed coolant all over the track, creating a very dangerous situation causing other drivers to lose control. I had a Porsche dealer remedy the situation by pinning the fittings and applying new adhesive.

NHTSA complaint #10765255
Feb 10, 2015vehicle speed control, engine
I was driving my vehicle down the highway while accelerating when I felt the car squirm and noticed a large cloud of smoke billowing from the rear of the vehicle. I pulled over and identified the issue as a catastrophic coolant leak from the engine area (rear) of the vehicle. I had the vehicle transported home and then to a repair shop where they identified the problem as a… Read more

I was driving my vehicle down the highway while accelerating when I felt the car squirm and noticed a large cloud of smoke billowing from the rear of the vehicle. I pulled over and identified the issue as a catastrophic coolant leak from the engine area (rear) of the vehicle. I had the vehicle transported home and then to a repair shop where they identified the problem as a coolant line that became separated from the engine block. It was explained to me that Porsche, from the factory, used an adhesive like material to mate the connectors of the coolant lines and engine and after usage they will come apart causing coolant to be hemorrhaged onto the engine and potentially wheels/tires causing for very dangerous road conditions. During the incident I almost lost control of my vehicle due to the coolant contacting the tires which would not have otherwise happened had Porsche not manufactured their vehicles in the aforementioned way. I as well as others on the road were put in a very dangerous situation because of this manufacturing issue. *tr

NHTSA complaint #10682527
Feb 7, 2015engine

I was driving on interstate 15 northbound when I felt the rear end of my car slip. I was traveling at approximately 70 mpg in 5th gear on a 68 degree evening. I looked in my rear view mirror and saw smoke / steam coming out of the engine compartment. I pulled over as soon as I could, which was approximately 1 minute later. This is exactly what happened in NHTSA action pe13009. *js

NHTSA complaint #10681862
Jun 28, 2013engine

Aluminum coolant pipe, that is glued into water pump manifold, came loose causing massive loss of coolant all over the road causing slippery conditions for other drivers. *tr

NHTSA complaint #10522217
May 10, 2013engine

An epoxied coolant fitting for the engine cooling system failed while driving. This resulted in the sudden loss of most all the engines coolant on the roadway. Permanent fix was to have auto repair shop weld the fitting in place. *tr

NHTSA complaint #10511347
May 4, 2013engine
Coolant hose failure when the vehicle is run medium/hard. I lost 1/2 liter the first couple times in total, and roughly 1 liter of coolant the last time, all over the exhaust and rear driver's side wheel tire. Lucky I did not spin out or have many cars behind me. I captured pictures of the last leak after returning to my garage on 05/03/2013. Prior to the last leak, I had… Read more

Coolant hose failure when the vehicle is run medium/hard. I lost 1/2 liter the first couple times in total, and roughly 1 liter of coolant the last time, all over the exhaust and rear driver's side wheel tire. Lucky I did not spin out or have many cars behind me. I captured pictures of the last leak after returning to my garage on 05/03/2013. Prior to the last leak, I had the front radiator replaced and the Porsche mechanic pressure tested the coolant system to ensure there were no leaks, as I had mentioned it would leak from near the rear driver's side. He did not find any leaks while the car was off and pressure tested. *tr

NHTSA complaint #10510624
Apr 30, 2013engine
Driving on private road and a radiator hose (in front of car) came off causing immediate and rapid purging of coolant on to all 4 tires and me spinning off of the road. Fortunately only into the grass on side of road. Car was flat bedded to mechanic for repairs. Spent several hundred dollars on repairs. Have since spent thousands on additional preventative measures due to… Read more

Driving on private road and a radiator hose (in front of car) came off causing immediate and rapid purging of coolant on to all 4 tires and me spinning off of the road. Fortunately only into the grass on side of road. Car was flat bedded to mechanic for repairs. Spent several hundred dollars on repairs. Have since spent thousands on additional preventative measures due to mechanics alerting me that the hoses in the rear will let go and cause coolant loss. Had to pay for engine removal and welding of lines for my safety. Costs was well over $3000. *tr

NHTSA complaint #10510138

2003 Porsche 911 Turbo recalls (3)

Recall 20E091000Suspension:front:macpherson strut

Ohlins USA, inc (ohlins) is recalling certain front struts, part number pos 5n20. These struts were sold as part of ohlins strut kits part number poz mn02, intended for installation on 1999-2005 Porsche 911 carrera 4 and 4s (generation 996), and 2001-2006 Porsche 911 Turbo / turbo s (generation 996) and kit part number poz mn05, intended for installation on 2005-2012 Porsche 911 carrera 4 and 4s (generation 997), and 2006-2013 Porsche 911 Turbo / turbo s (generation 997). The pin of the strut may experience excessive stress during maximum steering, possibly resulting breakage of the pin.

Risk: If the pin fails, it will cause separation of the strut from the vehicle, affecting vehicle control and increasing the risk of a crash.

Remedy: Ohlins will notify owners, and dealers will request the return of all unsold kits containing the subject part from dealer/distributor inventory for a full refund. All owners who purchased one of the kits (poz mn02 or poz mn05) will receive replacement front struts (pos 5n20 or pos 5n21 - these parts are interchangeable), along with new top mount interface solutions, free of charge. The recall began december 22, 2020. Owners may contact ohlins customer service at 1-800-336-9029.

Certain passenger vehicles fitted with front seat backs, which do not meet Porsche's strength standards.

Risk: In the event of a vehicle crash, the seats could twist, tilting on one side to the rear, possibly resulting in personal injury to the vehicle occupant.

Remedy: Dealers will replace both the front seats. Owner notification began on april 26, 2004. Owners should contact porsche at 1-800-545-8039.

Recall 03V2180002003Steering:hydraulic power assist:hose, piping, and connections

Certain passenger vehicles may have a loose fitting in the pressure line of the power steering assembly.

Risk: If the fitting is loose, the hydraulic fluid could leak out, which could lead to loss of power steering assist and, for vehicles equipped with a manual transmission, loss of clutch assistance. If the leaking fluid comes into contact with hot exhaust components, it could ignite.

Remedy: Dealers will tighten the fitting to specifications. Owner notification began on december 1, 2003. Owners should contact porsche at 1-800-545-8039.

Other Porsche 911 Turbo years

Frequently asked questions

Is the 2003 Porsche 911 Turbo a reliable car?

Our score for the 2003 Porsche 911 Turbo is 7.7/10 (good choice). It is based on 13 owner complaints and 3 recalls compared with other 2003 vehicles and other Porsche 911 Turbo years.

What are the most common problems with the 2003 Porsche 911 Turbo?

Owners most often report problems with engine & cooling (13 complaints), speed control (cruise, throttle) (1 complaints).

How many recalls does the 2003 Porsche 911 Turbo have?

3 recalls are on file with NHTSA, including: 20E091000 (suspension:front:macpherson strut); 04V070000 (seats); 03V218000 (steering:hydraulic power assist:hose, piping, and connections).

Source: NHTSA complaints & recalls, EPA fueleconomy.gov. Data updated November 18, 2026. Complaints are unverified reports by owners.