The contact owns a 2018 Mercedes-Benz e400 4matic. The contact received notification of NHTSA campaign number: 26v216000 (power train); however, the part to do the recall repair was not yet available. The local dealer was contacted. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was made aware of the issue.
2018 Mercedes-Benz E 400 4MATIC problems, recalls & MPG
NHTSA has received 3 complaints from owners of the 2018 Mercedes-Benz E 400 4MATIC, most often about the transmission & powertrain. There is 1 safety recall for this model year. The EPA rates it at about 22 MPG combined.
- More complaints than 13% of 2018 vehicles
- Most reported problem: transmission & powertrain (67% of complaints)
- 1 safety recall
Most reported 2018 Mercedes-Benz E 400 4MATIC problems
Owner complaints filed with NHTSA, grouped by problem area. One complaint can mention several areas.
Recent owner complaints
Component/system: the intake camshaft positioner/adjuster on cylinder bank 2 of the m276 v6 engine has failed, along with associated timing components. The vehicle (2018 Mercedes-Benz e400, VIN [xxx]) remains unrepaired and is available for inspection upon request. Safety risk: the engine produces a loud metallic rattle on cold starts, indicating loss of proper camshaft… Read more
Component/system: the intake camshaft positioner/adjuster on cylinder bank 2 of the m276 v6 engine has failed, along with associated timing components. The vehicle (2018 Mercedes-Benz e400, VIN [xxx]) remains unrepaired and is available for inspection upon request. Safety risk: the engine produces a loud metallic rattle on cold starts, indicating loss of proper camshaft timing control. If unaddressed, camshaft timing deviation can progress to timing chain failure, which on interference engines can cause valve-to-piston contact and sudden, severe engine damage or loss of power while driving, posing a risk to vehicle control. Confirmed by dealer: yes. Mercedes-Benz of catonsville (ro# [xxx]) diagnosed the issue and confirmed stored fault code p002177, indicating the intake camshaft position on cylinder bank 2 deviates from its specified value. The dealer's own notes state camshaft adjusters "are prone to failure and commonly damage camshafts when they fail." manufacturer notified: I contacted Mercedes-Benz USA directly (case #[xxx]) to request they address this repair, citing that this camshaft/timing failure is a known, recurring issue on m276-equipped vehicles, supported by mercedes' own technical service bulletins (tsb li05.10-p-056435 and tsb li05.20-p-059966) describing this exact failure pattern. Despite multiple attempts, including a promised callback that was never received and nearly an hour on hold with no resolution, Mercedes-Benz USA has not adequately responded
The contact owns a 2018 Mercedes-Benz e400 4matic. The contact stated that while driving at an undisclosed speed, the accelerator pedal was depressed and the driveshaft felt loose, with an abnormally loud knocking sound coming from the vehicle. The contact associated the failure with NHTSA campaign number: 26v216000 (power train). The dealer was contacted; however, the vehicle… Read more
The contact owns a 2018 Mercedes-Benz e400 4matic. The contact stated that while driving at an undisclosed speed, the accelerator pedal was depressed and the driveshaft felt loose, with an abnormally loud knocking sound coming from the vehicle. The contact associated the failure with NHTSA campaign number: 26v216000 (power train). The dealer was contacted; however, the vehicle was not diagnosed or repaired. The manufacturer was contacted and informed the contact that the remedy was not yet available. The failure mileage was approximately 84,000.
2018 Mercedes-Benz E 400 4MATIC recalls (1)
Mercedes-Benz USA, llc (mbusa) is recalling certain 2018 E 400 4MATIC sedan, E 400 4MATIC wagon, E 400 4MATIC cabriolet, E 400 4MATIC coupe, 2018-2020 maybach s 560 4matic, s 560 4matic coupe, s 450 4matic, 2019-2020 e 450 4matic sedan, e 450 4matic wagon, e 450 4matic coupe, and e 450 4matic cabriolet vehicles. The drive shaft universal joint may break, resulting in a sudden loss of drive power.
Risk: A sudden loss of drive power increases the risk of a crash.
Remedy: Dealers will inspect and replace the drive shaft as necessary, free of charge. Interim letters, notifying owners of the safety risk, were mailed may 22, 2026. Additional letters will be sent once the remedy is available. Owners may contact mbusa customer service at 1-800-367-6372. Vehicle identification numbers (vins) involved in this recall will be searchable on NHTSA.gov beginning april 10, 2026.
Fuel economy (EPA)
| Engine | Transmission | Drive | City | Hwy | Comb. |
|---|---|---|---|---|---|
| 3.0L 6-cyl | Automatic 9-spd | 4-Wheel Drive | 20 | 27 | 23 |
Other Mercedes-Benz E 400 4MATIC years
Frequently asked questions
Is the 2018 Mercedes-Benz E 400 4MATIC a reliable car?
There is not enough complaint data to score the 2018 Mercedes-Benz E 400 4MATIC yet.
What are the most common problems with the 2018 Mercedes-Benz E 400 4MATIC?
Owners most often report problems with transmission & powertrain (2 complaints), engine & cooling (1 complaints).
How many recalls does the 2018 Mercedes-Benz E 400 4MATIC have?
1 recall is on file with NHTSA, including: 26V216000 (power train:driveline:universal joint).
What gas mileage does the 2018 Mercedes-Benz E 400 4MATIC get?
The EPA rates the 2018 Mercedes-Benz E 400 4MATIC at about 20 MPG city, 26 MPG highway and 22 MPG combined, depending on engine and drivetrain.
Source: NHTSA complaints & recalls, EPA fueleconomy.gov. Data updated November 18, 2026. Complaints are unverified reports by owners.