The trunk smells like gasoline. The cabin smells like gasoline. While researching online, there are numerous complaints about a gas smell on these cars.
2000 Mazda MX-5 Miata problems, recalls & MPG
NHTSA has received 27 complaints from owners of the 2000 Mazda MX-5 Miata, most often about the brakes. There are no safety recalls for this model year. The EPA rates it at about 23 MPG combined.
- More complaints than 39% of 2000 vehicles
- Most reported problem: brakes (22% of complaints)
- No safety recalls on file
- 2 crashes, 2 fires, 2 injuries reported
Most reported 2000 Mazda MX-5 Miata problems
Owner complaints filed with NHTSA, grouped by problem area. One complaint can mention several areas.
When owners reported problems
Complaints by the year they were filed.
Recent owner complaints
Engine began running badly and check engine light came on. Took to Mazda dealer shop and was told a spark plug wire was defective and burned up. In actuality, the ignition coil had failed and caused the problems. The dealer replaced spark plugs, ignition wires, and coil. Two months later the check engine light came on again and the catalytic converter was clogged and had to be… Read more
Engine began running badly and check engine light came on. Took to Mazda dealer shop and was told a spark plug wire was defective and burned up. In actuality, the ignition coil had failed and caused the problems. The dealer replaced spark plugs, ignition wires, and coil. Two months later the check engine light came on again and the catalytic converter was clogged and had to be replaced. The mechanic said it was due to the poor running during the time when the ignition coil had been misfiring. So the defective coil caused a great deal of damage, and Mazda has taken no responsibility for these defective parts or the damage they have caused. If you read complaints for 1999 models, you'll see many failures of the ignition coil, some causing damage to other parts costing a great deal of money. Apparently, similar coils were used on 2000's with similar failures. But no recall and no investigation.
I recently purchased this car with only 44,000 miles on it. I received the complete service record, and it had been maintained through the dealership and through a private garage and body shop on a regular basis and thoroughly inspected on every service and before I bought it. No mention had ever been made of rust in the front frame rails. I pulled the front wheels to clean up… Read more
I recently purchased this car with only 44,000 miles on it. I received the complete service record, and it had been maintained through the dealership and through a private garage and body shop on a regular basis and thoroughly inspected on every service and before I bought it. No mention had ever been made of rust in the front frame rails. I pulled the front wheels to clean up rust and all connections and found patches of rust on both frame rails between the sway bar bracket and strut brackets. I can punch a screwdriver through the rust on the driver's side. I looked inside holes and saw rust inside the frame rails. I found many online complaints concerning similar rust on nb models 1999-2005. This rust will weaken the frame rails and could cause them to break during a front end collision, thus compromising crumple zones. It will also compromise the brackets holding sway bars, struts, and other vital suspension components. This could cause a loss of steering control. The rust begins inside frame rails so can't be seen in early phases--until it appears on outside of rails. Seems clear that Mazda knows of these problems since it redesigned the frame in 2006 and sells repair parts that don't involve thin sandwiched sheets of metal with materials in between that hold moisture, road salt, and other contaminants. Numerous holes in the frame rails also seem to take in water and contaminants. Miatas are made to perform on curves and have stiff suspension, so a lot of stress comes on
Area of the front frame support rails (core support is official name) rusts from the inside out. The construction method is a sandwiched material with some sort of tarpaper in the middle which traps moisture which, in turn, hastens frame rusting. This is a common problem especially in the 1999 - 2005 years and usually not easily identified until the frame is completely… Read more
Area of the front frame support rails (core support is official name) rusts from the inside out. The construction method is a sandwiched material with some sort of tarpaper in the middle which traps moisture which, in turn, hastens frame rusting. This is a common problem especially in the 1999 - 2005 years and usually not easily identified until the frame is completely rusted through. A google search of the issue returns numerous complaints. Once the frame rusts through it causes a real safety issue for the occupants. *tr
After driving around in heated conditions (roughly 80 degrees or more) for about 10+ miles, sometimes less, the car will not start. It will crank and attempt to start but fails to do so. In order to get it to start I have to pop the hood open and let it sit for 10-15 minutes. Once it starts it is very rough and the check engine light will come on. If I stop driving it for the… Read more
After driving around in heated conditions (roughly 80 degrees or more) for about 10+ miles, sometimes less, the car will not start. It will crank and attempt to start but fails to do so. In order to get it to start I have to pop the hood open and let it sit for 10-15 minutes. Once it starts it is very rough and the check engine light will come on. If I stop driving it for the day, the next morning, the light will be off and it will drive fine, until I drive during the day, or over a long distance. Thre has also been an instance when I was driving and stopped at a stop light and the car just stalled, had to perform the same thing, pop the hood and wait, it was back running. This also happend at a drive thru in 100 degree weather, car stalled as soon as I got my food and held up the already long line of cars behind me. I had to push it to a nearby parking lot. I have read on numerous forums and posts that this is a common problem with these cars and that it's either a) ignition coil b) spark plugs c) spark plug wires or d) camshaft position sensor.. Well.. I changed out the first 3 options, with no success.. Still having the same problem. I recently bought a cps and waiting for it to arrive. If this doesn't fix the problem I don't know what will. I drive constantly on highways to get around and if it stalls then, I will be in a lot of trouble. I do not have a warranty so I am doing all these repairs myself.
1999 to 2000 Mazda miata the wiring harness for the low/high beam has been shown to generate high temperatures and on one occasion, cause a fire. I personally have experienced this with my 1999 miata which prompted me to replace the forward section of the h4 headlight wiring harness. Others on the miata.net forum ( see http://forum.miata.net/vb/showthread.php?t=360101 have… Read more
1999 to 2000 Mazda miata the wiring harness for the low/high beam has been shown to generate high temperatures and on one occasion, cause a fire. I personally have experienced this with my 1999 miata which prompted me to replace the forward section of the h4 headlight wiring harness. Others on the miata.net forum ( see http://forum.miata.net/vb/showthread.php?t=360101 have experienced this, and one member who started the thread experienced a fire and damage. ) I urge the NHTSA to look into this further with Mazda USA. *tr
Rattling sound from engine bay with a change in tone and/or pitch when the clutch was engaged/disengaged. Result: catastrophic failure of the number 4 cylinder causing the connecting rod (among other internal engine parts) to be driven directly through the oil pan. Recommend procedure to correct the failure: complete engine replacement at a cost of $4,600 *cn
Dt: consumer purchased a used 2000 mazada miata, the front left fog light caught on fire, no previous problems with fog light. When the fog light caught on fire it caused damage to the bumper trim, marker light, and the wiring harness, consumer had to use a fire extinguish to put out the fire. *ak
2000 Mazda MX-5 Miata recalls (0)
No safety recalls have been issued for the 2000 Mazda MX-5 Miata.
Fuel economy (EPA)
| Engine | Transmission | Drive | City | Hwy | Comb. |
|---|---|---|---|---|---|
| 1.8L 4-cyl | Manual 5-spd | Rear-Wheel Drive | 22 | 27 | 24 |
| 1.8L 4-cyl | Manual 6-spd | Rear-Wheel Drive | 21 | 26 | 23 |
| 1.8L 4-cyl | Automatic 4-spd | Rear-Wheel Drive | 20 | 25 | 22 |
Other Mazda MX-5 Miata years
Frequently asked questions
Is the 2000 Mazda MX-5 Miata a reliable car?
Our score for the 2000 Mazda MX-5 Miata is 5.9/10 (average). It is based on 27 owner complaints and 0 recalls compared with other 2000 vehicles and other Mazda MX-5 Miata years.
What are the most common problems with the 2000 Mazda MX-5 Miata?
Owners most often report problems with brakes (6 complaints), electrical system (3 complaints), engine & cooling (3 complaints).
How many recalls does the 2000 Mazda MX-5 Miata have?
There are no NHTSA safety recalls for this model year.
What gas mileage does the 2000 Mazda MX-5 Miata get?
The EPA rates the 2000 Mazda MX-5 Miata at about 21 MPG city, 26 MPG highway and 23 MPG combined, depending on engine and drivetrain.
Source: NHTSA complaints & recalls, EPA fueleconomy.gov. Data updated November 18, 2026. Complaints are unverified reports by owners.