CarProblemsDB

2008 Mazda MAZDASPEED3 problems, recalls & MPG

NHTSA has received 33 complaints from owners of the 2008 Mazda MAZDASPEED3, most often about the transmission & powertrain. There is 1 safety recall for this model year.

4.4out of 10
Our verdict
Buy with caution
  • More complaints than 39% of 2008 vehicles
  • Most reported problem: transmission & powertrain (70% of complaints)
  • 1 safety recall
  • 1 crash, 2 fires, 2 injuries reported
How we score
Complaints33
Recalls1
MPG combined—
Safety—

Most reported 2008 Mazda MAZDASPEED3 problems

Owner complaints filed with NHTSA, grouped by problem area. One complaint can mention several areas.

Engine & cooling6 (18%)
Electrical system2 (6%)
Other / unknown2 (6%)
Suspension2 (6%)
Wheels2 (6%)
Body & structure1 (3%)
Fuel & propulsion system1 (3%)
Seat belts1 (3%)
Speed control (cruise, throttle)1 (3%)

When owners reported problems

32008
22009
12010
32011
72012
72013
52014
12015
12016
22017
12018

Complaints by the year they were filed.

Recent owner complaints

Apr 13, 2018power train

I was driving on a city road doing 35-40mph in 4th gear. I let off the gas while in 4th and coasted to about 20mph then shifted to n and stopped at a red light. When the light turned green I tried to shift to 1st an the shifter went half way in between r and 1st, so I shifted back to n and tried 1st again. Then the whole shifter broke off and was just laying there. Now my car is stuck in 3rd gear.

NHTSA complaint #11084999
Dec 21, 2017unknown or other

I was on the highway in motion when all of a sudden my shifter broke off and I wasn't able to move. I had to call I tow

NHTSA complaint #11055920
Apr 27, 2017unknown or other

I began to accelerate my mazdaspeed 3 shifting from 1st gear to second gear. I shifted into third where my shift broke and remained in my hand. My car stalled out in 3rd because I could not shift out. I took off the plastics covering the shifter and pulled the plate back into neautral so I could push my car to the local gas station. My shifter rod snapped and the spring came out.

NHTSA complaint #10981173
Jun 14, 2016power train

Manual shift lever came detached while driving in rush hour traffic. Car stuck in 4th gear. I was up shifting when it happened.

NHTSA complaint #10874127
Jul 25, 2015power train

While shifting from 2nd to 3rd gear at low speed, the shifter for my manual transmission broke off in my hand. After coasting to the side of the road and removing the console, I discovered it snapped in half at the location of the retention pin.

NHTSA complaint #10743456
Oct 26, 2014power train

As I was slowing down to make a right turn I placed the car in neutral. After making the turn and going to put the car back in gear the shifter breaks at the point where the pin goes in above the ball. I do not track my car nor shift hard ever. *tr

NHTSA complaint #10650101
Oct 5, 2014power train

The shift lever complete broke off and no longer had any affect on engaging any of the gears. I was stopped at a light and it broke when I tried to engage 1st gear out of neutral. Luckily I was able to feel for the shift cable mechanism through the leather shifter boot and engage 3rd gear. Limped home in 3rd. *tr

NHTSA complaint #10641487
Sep 26, 2014power train
I have a 2008 mazdaspeed 3 with a manual transmission. While I was driving to work on 9/9/2014, the steel rod that the shifter knob is attached to sheared off suddenly while I was shifting from first to second. This left the transmission in neutral and I had no power since I couldn't shift into gear. This was a very dangerous situation since I was traveling through an… Read more

I have a 2008 mazdaspeed 3 with a manual transmission. While I was driving to work on 9/9/2014, the steel rod that the shifter knob is attached to sheared off suddenly while I was shifting from first to second. This left the transmission in neutral and I had no power since I couldn't shift into gear. This was a very dangerous situation since I was traveling through an intersection in heavy traffic. Luckily, I avoided an accident and coasted to a stop. The car had to be towed home. The steel shaft separated completely in two without any warning. The break occurred right where the shaft has a hole drilled through it for the metal pin that locks it into the lower part of the shifter assembly. I have saved the broken part and I also took photos of it at the time of the incident. I'm very concerned that this part, which is critical to the safe operation of the vehicle failed without warning while I was driving. This appears to be a serious design or manufacturing defect. There are other reports of similar shifter failures for this year/model car on internet forums. I reported this problem to a Mazda customer service representative via Mazda's customer experience hotline on 9/9. I emailed them a description of the problem and sent photos of the part. I also showed the part to my local Mazda dealership, lee johnson Mazda in kirkland, wa and they confirmed that the part should not have failed in this fashion. I have made repeated follow up calls to the Mazda customer experie

NHTSA complaint #10639364

2008 Mazda MAZDASPEED3 recalls (1)

Recall 11V3290002011Visibility:windshield wiper/washer:motor

Mazda is recalling certain model year 2008-2009 mazda3 and MAZDASPEED3 vehicles manufactured from january 7, 2008, through november 28, 2008. The ground terminal of the windshield wiper motor may have been inadvertently bent during assembly. If this condition exists then over time the electrical resistance of the motor circuit may increase up to a point that the windshield wipers would not work.

Risk: The loss of wiper function in adverse weather could potentially increase the risk of a crash.

Remedy: Dealers will install an additional ground harness on the wiper motor free of charge. The safety recall is expected to begin on or before july 15, 2011. Owners may contact mazda customer assistance center at 1-800-222-5500.

Other Mazda MAZDASPEED3 years

Frequently asked questions

Is the 2008 Mazda MAZDASPEED3 a reliable car?

Our score for the 2008 Mazda MAZDASPEED3 is 4.4/10 (buy with caution). It is based on 33 owner complaints and 1 recall compared with other 2008 vehicles and other Mazda MAZDASPEED3 years.

What are the most common problems with the 2008 Mazda MAZDASPEED3?

Owners most often report problems with transmission & powertrain (23 complaints), engine & cooling (6 complaints), electrical system (2 complaints).

How many recalls does the 2008 Mazda MAZDASPEED3 have?

1 recall is on file with NHTSA, including: 11V329000 (visibility:windshield wiper/washer:motor).

Source: NHTSA complaints & recalls, EPA fueleconomy.gov. Data updated November 18, 2026. Complaints are unverified reports by owners.