CarProblemsDB

2011 Mazda Mazda6 suspension problems

51 owners reported suspension problems — 38% of all 136 complaints about the 2011 Mazda Mazda6.

Suspension complaints by Mazda Mazda6 year

20183
20165
20154
20145
20135
20129
201151
201043
200976
20082
20074
20064
20054
20044
20039

What owners report

Nov 3, 2026steering, suspension

The frame rusted through and broke where the lower control arm attaches on the passenger side. This caused an immediate pull to the right and nearly caused a wreck. The car was towed to a local mechanic shop who reported the problem. Mazda is currently not taking responsibility for this even though it was a known issue and a recall was issued for this exact issue.

NHTSA complaint #11775340
Sep 20, 2026steering, suspension, wheels

Crossmember is rusted out and car is undriveable. There is a recall on the crossmember front subframe

NHTSA complaint #11765687
May 15, 2026suspension, structure
The contact owns a 2011 Mazda Mazda6. The contact stated that while driving at 25 MPH, the contact attempted to swerve out the way of another vehicle as she suddenly lost control of the vehicle. Due to the failure, the contact force to steer the vehicle to the left as the contact attempted to maintain control of the vehicle. The contact managed to pull over into a parking lot… Read more

The contact owns a 2011 Mazda Mazda6. The contact stated that while driving at 25 MPH, the contact attempted to swerve out the way of another vehicle as she suddenly lost control of the vehicle. Due to the failure, the contact force to steer the vehicle to the left as the contact attempted to maintain control of the vehicle. The contact managed to pull over into a parking lot and called her husband for assistance. Despite the failure, the contact managed to drive the vehicle home despite the vehicle being extremely difficult to maneuver. The contact's husband managed to drive the vehicle to a local mechanic, who determined that the front subframe had failed due to excessive corrosion of the subframe. The mechanic then informed the contact of NHTSA campaign number: 19v323000 (structure, suspension); however, the contact was informed that her vehicle was not included in the recall. The manufacturer was notified of the failure where they confirmed that the vehicle was not included in the recall. The vehicle remained in the mechanic's possession and had yet to be repaired. The failure mileage was 115,000.

NHTSA complaint #11738066
Jan 25, 2026steering, suspension, structure
2011 Mazda6 a serious safety defect occurred on my vehicle and matches NHTSA recall 19v-323 / Mazda recall 2818i (front cross member corrosion due to insufficient coating) despite this recall not being associated with my VIN. Front cross member cracked due to rust, causing loss of steering control, wheel misalignment, and scraping from the front wheel. This is exactly the… Read more

2011 Mazda6 a serious safety defect occurred on my vehicle and matches NHTSA recall 19v-323 / Mazda recall 2818i (front cross member corrosion due to insufficient coating) despite this recall not being associated with my VIN. Front cross member cracked due to rust, causing loss of steering control, wheel misalignment, and scraping from the front wheel. This is exactly the failure described in the recall (breakage of the cross member and reduced steering control, increasing the risk of a crash). My safety and the safety of others were put at risk. Although my VIN is not currently associated with the recall, all conditions of the recall apply to my vehicle: -2011 Mazda6 within the affected production range -defect is a manufacturing issue (insufficient paint coating) -vehicle was registered in missouri from 2023-2025, which is a listed state the only reason this recall was not associated with my VIN is because the vehicle was not registered in missouri at the exact time of the 2019 recall campaign. This is an administrative gap, not a safety distinction. It should not be allowed to limit a manufacturer safety defect to specific states. Vehicles move across state lines constantly. A defect that causes loss of steering control does not stop being dangerous when a car crosses a border. Registration records alone did not reflect actual vehicle use or risk. If recalls are state-limited, manufacturers and NHTSA must continue tracking registration changes and associate the recall with

NHTSA complaint #11713263
Nov 21, 2025suspension, unknown or other
When I took the car into my ase mechanic shop for a normal oil change and tire rotation, they performed a general overall car inspection. They noticed that the driver side rear subframe had rusted through completely, where the coil spring is located. The passenger side was rusted, but has not yet broke through. They stated that the subframe parts should not rust through like… Read more

When I took the car into my ase mechanic shop for a normal oil change and tire rotation, they performed a general overall car inspection. They noticed that the driver side rear subframe had rusted through completely, where the coil spring is located. The passenger side was rusted, but has not yet broke through. They stated that the subframe parts should not rust through like this. They also stated that it is dangerous to drive the car in this condition. I have not notified the manufacturer as of yet, but plan to do so. There were no warning lights, but the ride did seem to be rougher than normal. The attach photos contain 2 photos of the failed driver side rear subframe and 1 photo of the good, passenger side rear subframe.

NHTSA complaint #11700788
Oct 26, 2025suspension

2011 Mazda6 rear subframe rot/rust, unsafe and dangerous to drive, same situation as the front subframe that is part of a recall.

NHTSA complaint #11695663
Aug 22, 2025suspension, structure
The front and back cross members underneath my Mazda6 have completely rusted out. There are numerous complaints about Mazda's "safety recall 2818i expansion" not covering the back support member and also not considering nebraska to be a salt belt state despite the state, and specifically omaha using salt to treat their roads in the winter. On [xxx], my front cross member… Read more

The front and back cross members underneath my Mazda6 have completely rusted out. There are numerous complaints about Mazda's "safety recall 2818i expansion" not covering the back support member and also not considering nebraska to be a salt belt state despite the state, and specifically omaha using salt to treat their roads in the winter. On [xxx], my front cross member completely failed due to rust, causing my vehicle to lose control. I've taken my car to the mechanic and they confirmed the front and back cross members are completely rusted and need replacement costing $7,000. Information redacted pursuant to the freedom of information act (foia), 5 u.s.c. 552(b)(6)

NHTSA complaint #11682499
Aug 19, 2025suspension, structure
The contact owns a 2011 Mazda Mazda6. The contact stated that while her mother was driving at slow speeds in a parking area, there was an abnormally loud metallic sound coming from underneath the vehicle, and moments later, the vehicle became extremely difficult to maneuver. No warning lights were illuminated. The vehicle was towed to the dealer, who determined that the rear… Read more

The contact owns a 2011 Mazda Mazda6. The contact stated that while her mother was driving at slow speeds in a parking area, there was an abnormally loud metallic sound coming from underneath the vehicle, and moments later, the vehicle became extremely difficult to maneuver. No warning lights were illuminated. The vehicle was towed to the dealer, who determined that the rear crossmember had detached from the vehicle due to excessive corrosion of the subframe. The contact was informed that the vehicle could not be repaired. After investigating the failure, the contact related the failure to NHTSA campaign number: 19v323000 (structure, suspension); the VIN was previously included, but was repaired in 2019. The contact stated that the recall repair was for the front passenger’s side lower control arm. The manufacturer was notified of the failure, a case was opened, and the contact was referred to the NHTSA hotline for assistance. The failure mileage was 150,000.

NHTSA complaint #11681707
Mar 20, 2025suspension

Front and rear subframe rust leading to gaping holes, outside of normal wear and tear.

NHTSA complaint #11649538
Nov 25, 2024suspension, structure
The contact owns a 2011 Mazda Mazda6. The contact stated that while the vehicle was at the dealer for routine service, the vehicle was diagnosed with rust and corrosion of the sub-frame. The contact was informed that the sub-frame needed to be replaced. The vehicle was not repaired. The contact was informed of NHTSA campaign number: 19v323000 (structure, suspension); however,… Read more

The contact owns a 2011 Mazda Mazda6. The contact stated that while the vehicle was at the dealer for routine service, the vehicle was diagnosed with rust and corrosion of the sub-frame. The contact was informed that the sub-frame needed to be replaced. The vehicle was not repaired. The contact was informed of NHTSA campaign number: 19v323000 (structure, suspension); however, the VIN was not included in the recall. The manufacturer was made aware of the failure. The contact was advised to contact the ntsa hotline to report the failure. The failure mileage was approximately 100,000.

NHTSA complaint #11627207
Sep 30, 2024suspension
The contact owns a 2011 Mazda Mazda6. The contact stated that while reversing, the contact heard an abnormal snapping sound coming from the rear passenger’s side of the vehicle. The vehicle was stopped and inspected, where the contact observed a big spring pushing a bar into the ground on the rear passenger’s side. The vehicle was not diagnosed or repaired. The manufacturer… Read more

The contact owns a 2011 Mazda Mazda6. The contact stated that while reversing, the contact heard an abnormal snapping sound coming from the rear passenger’s side of the vehicle. The vehicle was stopped and inspected, where the contact observed a big spring pushing a bar into the ground on the rear passenger’s side. The vehicle was not diagnosed or repaired. The manufacturer was notified of the failure. The failure mileage was approximately 184,000.

NHTSA complaint #11617312
Aug 12, 2024suspension
The rear cross member / aka (rear subframe) p/n geg1-28-80x has completely rusted out. The car is no longer safe to drive per a pennsylvania state inspection. If driven parts of the rear suspension will drop off the car creating a hazard to other motorists and the driver of the car can lose control / mobility causing a traffic accident. Picture the entire rear suspension… Read more

The rear cross member / aka (rear subframe) p/n geg1-28-80x has completely rusted out. The car is no longer safe to drive per a pennsylvania state inspection. If driven parts of the rear suspension will drop off the car creating a hazard to other motorists and the driver of the car can lose control / mobility causing a traffic accident. Picture the entire rear suspension suddenly collapsing, that is what is going to happen. The front subframe was subject to a recall. That recall should have included the rear as it is the same material just a few feet away, subject to the same rusting issues. These subframes were not property designed to prevent rust or even withstand a little moisture, as my car has been very well maintained. When I read the online forms this is a flaw in all 2009- 2013 Mazda 6's and the sister car the ford fusion and mercury milan. I have opened a case with Mazda USA case #[xxx]. They are going to inspect to confirm my mechanic diagnosis. However they are currently under no obligation to repair and replace the rusted parts but they should be as this should have been replaced when the front subframe recall was performed. Information redacted pursuant to the freedom of information act (foia), 5 u.s.c. 552(b)(6)

NHTSA complaint #11608007
Jul 31, 2024suspension, structure
After getting the recall information about the front crossmember rusting out due to corrosion, I decided to check the rear crossmember on my car. Wow, the rear crossmember is so much worse than the front one and I’ve read hundreds of similar stories about the exact same thing happening to other Mazda 6 sedans around these model years (2009-2013). The rear crossmember on my… Read more

After getting the recall information about the front crossmember rusting out due to corrosion, I decided to check the rear crossmember on my car. Wow, the rear crossmember is so much worse than the front one and I’ve read hundreds of similar stories about the exact same thing happening to other Mazda 6 sedans around these model years (2009-2013). The rear crossmember on my car, which supports the entire rear suspension is completely rusted thru in several spots and the lower end links aren’t even attached anymore because the brackets literally fell off and so now both back tires are leaning in at the top. It is very noticeable! Very unsafe to drive! I decided to park this car until a solution is reached with Mazda or the NHTSA on how to deal with this. I don’t know why the front crossmember was recalled but not the rear? There’s only 2 things that are rusted on my car, period…the front & rear crossmembers!

NHTSA complaint #11605695
Jul 29, 2024suspension, structure
The contact owns a 2011 Mazda Mazda6. The contact stated that while the independent mechanic was performing an oil change on the vehicle, the independent mechanic informed the contact that the rear subframe was severely rusted with holes in the subframe. The vehicle was taken to the dealer, where it was determined that the rear subframe needed to be replaced. The vehicle was… Read more

The contact owns a 2011 Mazda Mazda6. The contact stated that while the independent mechanic was performing an oil change on the vehicle, the independent mechanic informed the contact that the rear subframe was severely rusted with holes in the subframe. The vehicle was taken to the dealer, where it was determined that the rear subframe needed to be replaced. The vehicle was not repaired. The contact stated that the vehicle was previously repaired under NHTSA campaign number: 19v323000 (structure, suspension). The manufacturer was notified of the failure and informed the contact that the VIN was not included in the recall. The failure mileage was approximately 129,000.

NHTSA complaint #11605184
Jul 21, 2024suspension

I'm filing a complaint as to substandard steel being used in the rear crossmember/rear subframe. Extensive corrosion has been confirmed upon a state inspection, which requires replacement at my personal cost. The front engine cradle was replaced in 2019, per a recall notice for the same extensive corrosion problem. A safety issue that needs to be addressed by Mazda.

NHTSA complaint #11603648
Jun 18, 2024steering, suspension

Completely rusted rear crossmember subframe

NHTSA complaint #11595019
May 6, 2024suspension, structure
The contact's daughter owns a 2011 Mazda Mazda6. The contact stated that while her daughter was driving at an undisclosed speed, the steering wheel inadvertently moved to the left at a 30–35-degree angle. Additionally, the rear end of the vehicle swayed while coming to a stop. The vehicle was taken to an independent mechanic, who determined that the crossmember was severely… Read more

The contact's daughter owns a 2011 Mazda Mazda6. The contact stated that while her daughter was driving at an undisclosed speed, the steering wheel inadvertently moved to the left at a 30–35-degree angle. Additionally, the rear end of the vehicle swayed while coming to a stop. The vehicle was taken to an independent mechanic, who determined that the crossmember was severely corroded and the front driver's side crossmember had cracked. The vehicle was then towed to the dealer, where it was diagnosed that the front sub frame, sub frame link, sway bar, sub frame nuts, and bolts needed to be replaced. The vehicle was not repaired. The manufacturer was made aware of the failure and a case was opened. The contact related the failure to NHTSA campaign number: 19v323000 (structure, suspension); however, the VIN was not included in the recall. The failure mileage was approximately 89,000.

NHTSA complaint #11587143
Apr 2, 2024suspension

Rear subframe rusted and cracked in half when my daughter was on a major highway!

NHTSA complaint #11580652
Mar 16, 2024suspension
My 2011 Mazda 6 rear suspension broke while my wife was driving our car on the highway. It could have killed my wife and son. The frame is rusted so bad that the lower control arm broke away from the frame, the rear wheel is barely hanging on it by one bolt on the front control arm. It is very much a safety issue and Mazda needs to take charge of the problem before someone… Read more

My 2011 Mazda 6 rear suspension broke while my wife was driving our car on the highway. It could have killed my wife and son. The frame is rusted so bad that the lower control arm broke away from the frame, the rear wheel is barely hanging on it by one bolt on the front control arm. It is very much a safety issue and Mazda needs to take charge of the problem before someone dies in their vehicle. Our car has 106215 miles on it and we still owe alot of money on this thing.

NHTSA complaint #11577809
Feb 7, 2024suspension, structure
The rear cross member/subframe is completely rusted in two and the rear lower forward control arm is detached from cross member/subframe on both sides. There is currently an active recall for the front cross member due to accelerated corrosion from road salt but I’m not aware of any inclusion of the rear frame or suspension components tied in with this recall. It definitely… Read more

The rear cross member/subframe is completely rusted in two and the rear lower forward control arm is detached from cross member/subframe on both sides. There is currently an active recall for the front cross member due to accelerated corrosion from road salt but I’m not aware of any inclusion of the rear frame or suspension components tied in with this recall. It definitely needs added to it as this is very dangerous, possibly even more so than the front. Rest of the actual car body is fine, except for a little bit of surface rust. Please add this to the current corrosion recall! Car is registered in wv and is available for inspection anytime and I will be attaching pictures and I also have a video but it won’t let me post it on here.

NHTSA complaint #11570675
Dec 13, 2023steering, suspension
Turning onto a road, heard a loud thud from the front passenger corner. Car steering became highly erratic. Parked the car, noticed the front passenger wheel was crooked. Took it to the nearest shop and they said the crossmember was rusted completely through and snapped, causing the control arm to lose control. Found out there is a recall for the car model and year for this… Read more

Turning onto a road, heard a loud thud from the front passenger corner. Car steering became highly erratic. Parked the car, noticed the front passenger wheel was crooked. Took it to the nearest shop and they said the crossmember was rusted completely through and snapped, causing the control arm to lose control. Found out there is a recall for the car model and year for this exact issue, but my car wasn't covered by it, so I did not receive notification of it, but it clearly affects this VIN as well.

NHTSA complaint #11559875
Dec 9, 2023suspension
Noticed the left rear tire suddenly had a lot of negative camber and there were now clunking sounds while driving. Inspection showed that the rear crossmember is severely rusted with holes, cracks, and delamination. The left toe link mount is completely separated, the coil spring stoppers are detached and loose inside the springs, and the right coil spring has the top coil… Read more

Noticed the left rear tire suddenly had a lot of negative camber and there were now clunking sounds while driving. Inspection showed that the rear crossmember is severely rusted with holes, cracks, and delamination. The left toe link mount is completely separated, the coil spring stoppers are detached and loose inside the springs, and the right coil spring has the top coil broken off. The front body connection of the rear crossmember is barely connected. The level of corrosion on the rest of the car is drastically less than the rear crossmember. Currently deciding whether and how to repair. (pennsylvania)

NHTSA complaint #11559265
Jul 22, 2023steering, suspension, structure
I purchased a used vehicle in nh from a private seller "as is", repaired tires and brakes, passed ma state inspection and dropped the car off to address the recall, which I had researched via a VIN number search. The dealership informed me that the body had corroded beyond repair, and they cannot perform the required repair for the recall. While the dealership has been… Read more

I purchased a used vehicle in nh from a private seller "as is", repaired tires and brakes, passed ma state inspection and dropped the car off to address the recall, which I had researched via a VIN number search. The dealership informed me that the body had corroded beyond repair, and they cannot perform the required repair for the recall. While the dealership has been helpful, this looks like a major underlying manufacturing flaw for a vehicle at 115k built in 2011.

NHTSA complaint #11533800
Jul 7, 2023suspension, unknown or other
Rear k frame is completely rusted out. You investigated the front frame rust issues on these cars which resulted in a Mazda recall. However, the rear frame with the same structure weaknesses was left out. As a result Mazda is refusing to fix or replace thousands of vehicles. Mazda forums are full of drivers with this same exact issue. If these frames start to fail while… Read more

Rear k frame is completely rusted out. You investigated the front frame rust issues on these cars which resulted in a Mazda recall. However, the rear frame with the same structure weaknesses was left out. As a result Mazda is refusing to fix or replace thousands of vehicles. Mazda forums are full of drivers with this same exact issue. If these frames start to fail while being driven I see the potential for injuries or loss of life.

NHTSA complaint #11530798
Jun 5, 2023suspension
When Mazda recalled the front frame they should’ve fixed the rear frame too I believe that this should have been recalled because there is the same problem all over the internet with this model. When my 16 year old daughter was going down the road @ 60mph and the rear subframe broke - bent the exhaust and then the tire rubbed the wheel well smoked like crazy and thought is was… Read more

When Mazda recalled the front frame they should’ve fixed the rear frame too I believe that this should have been recalled because there is the same problem all over the internet with this model. When my 16 year old daughter was going down the road @ 60mph and the rear subframe broke - bent the exhaust and then the tire rubbed the wheel well smoked like crazy and thought is was on fire & it then had blow out on the highway. Had to have it towed as putting the spare on would have done no good .

NHTSA complaint #11525400
Feb 8, 2023suspension
During virginia state vehicle safety inspection in january 2023, the inspector noted a problem with severe rust in the rear cross-member (part 28-800a). The rear cross-member is severely rusted and crumbling at fastening and stress points. The driver side (left side) of the cross-member that secures the top of the (left) coil spring is so deteriorated that the left stopper… Read more

During virginia state vehicle safety inspection in january 2023, the inspector noted a problem with severe rust in the rear cross-member (part 28-800a). The rear cross-member is severely rusted and crumbling at fastening and stress points. The driver side (left side) of the cross-member that secures the top of the (left) coil spring is so deteriorated that the left stopper (28-111b) became unattached from the top of the mount and is freely floating inside the coil spring, causing visible damage to the coil spring when the stopper (made of steel with rubber on bottom) and the coil spring come in contact. The same problem is occuring on the passenger side (right) of the rear crossmember as the upper mount is severely rusted and crumbling. If the cross-member mounts collapse or the coil springs break while the vehicle is moving, the driver would have extreme difficulty maintaining safe control of the vehicle.

NHTSA complaint #11506208
Feb 7, 2023suspension
I heard that the Mazda 6 was recalled for a front end suspension issue with rust.my Mazda 6 had a problem with rust on the rear crossmember.it rusted out and came apart. I noticed the car was leaning to one side,had it checked out and the crossmember was rusted and broke. I am in the process of buying another car.mechanic told me not to drive it very far.if the car was… Read more

I heard that the Mazda 6 was recalled for a front end suspension issue with rust.my Mazda 6 had a problem with rust on the rear crossmember.it rusted out and came apart. I noticed the car was leaning to one side,had it checked out and the crossmember was rusted and broke. I am in the process of buying another car.mechanic told me not to drive it very far.if the car was recalled because of rust on front suspension of car it probably has same issue on back suspension.

NHTSA complaint #11505965
Jan 3, 2023suspension

The front sub frame was recalled due to severe rot and corrosion. It was replaced at the dealers cost. The issue is the rear subframe has the exact same, if not worse rot and corrosion. I called the dealer and no recall is issued. Thousands of people are having the same issue

NHTSA complaint #11499869
Nov 11, 2022suspension
October 11, 2022 I hit a steep curb while pulling into a gas station before heading to work, which caused alignment issues. I originally thought it was just about that time for an alignment so I drove my car to tire discounters. [xxx] the manager there called me and told me pretty much the sub frame on my car was rusted so bad that he doesn’t even know how I made it to their… Read more

October 11, 2022 I hit a steep curb while pulling into a gas station before heading to work, which caused alignment issues. I originally thought it was just about that time for an alignment so I drove my car to tire discounters. [xxx] the manager there called me and told me pretty much the sub frame on my car was rusted so bad that he doesn’t even know how I made it to their facility, and pretty much it would cost more to fix than the car is worth, so I should think about trading it in or I would have to look elsewhere for someone to fix the sub frame. After google search about this particular part, my store manager found a recall for the Mazda subframes claiming the listed states fail to put a coating on the subframe to protect the car from rusting. The car originated from michigan which was one of the states listed on the recall list, so I called nelson Mazda in murfreesboro, tn and they had informed me that this particular part was already fixed in 2019 but judging by the picture [xxx] from tire discounters sent me. No one actually fixed anything, so someone falsely lied on documentation so [xxx] from Mazda agreed to take a look at it and he agreed that this sub frame was not “properly” done and had to wait a couple days to get approved in order to redo the recalled part. Well due to sub frame rusting caused additional problems like replace the front uppers control arm, the struts, the front control arm, and the tie rod end needs to be replaced as well. I specifically aske

NHTSA complaint #11493224
Sep 12, 2022suspension

I was driving my Mazda today and while I was pulling into a parking lot I hit a pothole and my rear frame broke and now the car is sitting on one side almost touching the back right tire, when Mazda recalled the front frame they should’ve fixed the rear frame too I believe that this should have been recalled because there is the same problem all over the internet with this model.

NHTSA complaint #11484138
Sep 11, 2022suspension

The rear subframe is badly rotting out and broken in I right rear side. There is a large hole in the subframe next to the spring . The garage said it is not safe to drive. Same issue with the front frame and it was replaced under recall.

NHTSA complaint #11483875
Aug 4, 2022suspensionCrash1 injured
The contact owns a 2011 Mazda mz6. The contact stated that while her son was driving at approximately 60-65 MPH, the rear subframe had detached, causing the vehicle to spin across four lanes of traffic and then crash into the median wall. The air bags were not deployed. A police report was filed that listed the cause of failure as a passenger's side rear tire blowout due to… Read more

The contact owns a 2011 Mazda mz6. The contact stated that while her son was driving at approximately 60-65 MPH, the rear subframe had detached, causing the vehicle to spin across four lanes of traffic and then crash into the median wall. The air bags were not deployed. A police report was filed that listed the cause of failure as a passenger's side rear tire blowout due to cracks along the tire. The contact's son sustained a back injury and medical attention was received. The vehicle was towed to the contact's residence where an independent mechanic diagnosed that the rear subframe had detached. The manufacturer was made aware of the failure and a case was opened. The failure mileage was approximately 200,000.

NHTSA complaint #11477574
Sep 9, 2021suspension
Vehicle was brought in for recall 2818i in january 2020. Still noticed a rough ride afterwards and believed issue to be with the rear suspension. Local independent auto repair shop inspected suspension and said all was well. Brought in for regular check up at Mazda dealer in september 2021. Mechanic took video to show the amount of rust on the rear subframe. Condition is… Read more

Vehicle was brought in for recall 2818i in january 2020. Still noticed a rough ride afterwards and believed issue to be with the rear suspension. Local independent auto repair shop inspected suspension and said all was well. Brought in for regular check up at Mazda dealer in september 2021. Mechanic took video to show the amount of rust on the rear subframe. Condition is beyond repair without replacement and is hazardous to drive. This should have been addressed with the front subframe recall. Definitely needs to be addressed by Mazda now.

NHTSA complaint #11432320
Aug 9, 2021suspension, structure

Rear cross subframe is very rotten and my mechanic told me not safe to drive car. Mazda had recall on front but not on rear. Is made of same material I look at line and a lot of people have same problem I hope you can help us with this problem thank you and I hope you can investigate this major issue

NHTSA complaint #11428323
Jul 29, 2021suspension
The contact owns a 2011 Mazda Mazda6. The contact stated that while her son was driving at an undisclosed speed, the steering wheel was turned to the right inadvertently. The vehicle was taken to an independent mechanic and diagnosed that there were holes in the subframe bracket. The contact was advised to contact the local dealer for assistance. The vehicle was towed to the… Read more

The contact owns a 2011 Mazda Mazda6. The contact stated that while her son was driving at an undisclosed speed, the steering wheel was turned to the right inadvertently. The vehicle was taken to an independent mechanic and diagnosed that there were holes in the subframe bracket. The contact was advised to contact the local dealer for assistance. The vehicle was towed to the dealer and the dealer informed the contact that the subframe bracket was installed prior to a recall repair as a temporary fix. The vehicle was not repaired and remained at the dealer. The manufacturer was made aware of the failure and informed the contact that they would approve the replacement of the front subframe, sway bar, and arms only as part of the warranty. The failure mileage was 103,000.

NHTSA complaint #11426964
May 28, 2021suspension, power train
Rear control arm broke off the rear subfame due heavy rust. I had to replace the entire rear subframe plus both control arms. This incident occurred while I was driving! Now I find out that the front end is shot as well and that Mazda is only recalling the front subframe and not the rear and I want to know why. Somebody could have been killed. The repair cost me $700 plus… Read more

Rear control arm broke off the rear subfame due heavy rust. I had to replace the entire rear subframe plus both control arms. This incident occurred while I was driving! Now I find out that the front end is shot as well and that Mazda is only recalling the front subframe and not the rear and I want to know why. Somebody could have been killed. The repair cost me $700 plus rental fees for a vehicle. I had my vehicle in the shop for 16days. It cost me $1,135. I have the invoices.

NHTSA complaint #11418915
Apr 28, 2021suspension

Rear cross member is totally rusted out'just like the front cross member was that had a recall. Was driving and the right rear wheel totally collapsed under the car while driving at 60 MPH. Could have caused an accident. Rear cross member broke in pieces

NHTSA complaint #11414239
Feb 26, 2021steering, suspension, structure

The rear subframe has excessive rust and mechanic reported it would not pass yearly inspection unless replaced. Front subframe had the same problem in 2019 and was replaced through Mazda recall. Mechanic reports the rear subframe has the same exact nature of rust.

NHTSA complaint #11398057
Oct 19, 2020suspension
Tl* the contact owns a 2011 Mazda Mazda6. The contact stated that there was an abnormal sound coming from the rear of the vehicle. The contact stated that the rear cross member of the subframe broke from rust and corrosion while reversing. The vehicle was included in NHTSA campaign number: 19v323000 (structure, suspension) for the front cross member however, the rear cross… Read more

Tl* the contact owns a 2011 Mazda Mazda6. The contact stated that there was an abnormal sound coming from the rear of the vehicle. The contact stated that the rear cross member of the subframe broke from rust and corrosion while reversing. The vehicle was included in NHTSA campaign number: 19v323000 (structure, suspension) for the front cross member however, the rear cross member was not included. The vehicle was not repaired. The manufacturer and an unknown dealer were notified of the failure. The failure mileage was 108,000.

NHTSA complaint #11365204
Jul 4, 2020suspension
Mazda has recalled and replaced front sub-frames for corrosion related issues. Mazda has not recalled rear sub-frames which have the same corrosion related issues from improper steel quality or fault manufacturing of the steel components. Upon inspection of rear sub-frame, multiple holes in the rear sub-frame were observed, including multiple holes at the passenger side rear… Read more

Mazda has recalled and replaced front sub-frames for corrosion related issues. Mazda has not recalled rear sub-frames which have the same corrosion related issues from improper steel quality or fault manufacturing of the steel components. Upon inspection of rear sub-frame, multiple holes in the rear sub-frame were observed, including multiple holes at the passenger side rear spring mount which significantly compromises the structural integrity. I am now afraid to drive the car at high speeds in fear of catastrophic failure and a crash. Mazda dealership has stated it is not under warranty or recall and will cost me approximately $4,000.00 to replace the entire rear-subframe. This is not a maintenance item in my opinion on a less than 10 year old vehicle I bought new, and is a defect from the manufacturer similar to the front sub-frames. Upon investigation on the internet, numerous Mazda6 owners who had front sub-frames replaced also have same issue. *tr

NHTSA complaint #11337428
← All 2011 Mazda Mazda6 problems & recalls