Vehicle jerks at low speed when accelerate and idle when accelerate, p0766 code shows, engine noise and gears jump, when reverse the vehicle jerks.
2009 Mazda Mazda6 engine problems
16 owners reported engine & cooling problems — 4% of all 386 complaints about the 2009 Mazda Mazda6.
Engine & cooling complaints by Mazda Mazda6 year
What owners report
Engine overheated while driving in a straight line in traffic at low speed with temperature in the 80's. The engine block cracked as a result. The engine and the complete cooling fan assembly had to be replaced. The engine temperature had risen high on several occasions before this, while idling, driving at low speeds, and driving at moderate and highway speeds, temperatures… Read more
Engine overheated while driving in a straight line in traffic at low speed with temperature in the 80's. The engine block cracked as a result. The engine and the complete cooling fan assembly had to be replaced. The engine temperature had risen high on several occasions before this, while idling, driving at low speeds, and driving at moderate and highway speeds, temperatures ranging from 50's to 90's. When the overheating occurred the air conditioning also failed to function properly. I had complained to the dealership about this issue and they claimed it was a fuse. They replaced the fuse, but it did not resolve the issue. *tr
Tl* the contact owns a 2009 Mazda 6. While driving 20 MPH, the contact heard an abnormal noise coming the engine compartment and the steering wheel became difficult to turn without warning. The vehicle was taken to an independent mechanic where it was diagnosed that the engine crossmember was corroded and cracked. The vehicle was not repaired. The dealer (ralph thayer Mazda,… Read more
Tl* the contact owns a 2009 Mazda 6. While driving 20 MPH, the contact heard an abnormal noise coming the engine compartment and the steering wheel became difficult to turn without warning. The vehicle was taken to an independent mechanic where it was diagnosed that the engine crossmember was corroded and cracked. The vehicle was not repaired. The dealer (ralph thayer Mazda, 34601 plymouth rd, livonia, mi 48150, (734) 425-5400) was contacted to schedule an appointment for a second diagnostic test. The manufacturer was made aware of the failure and stated that the vehicle was not included in a recall. The manufacturer informed the contact that she could be reimbursed if she got the vehicle repaired. The failure mileage was 132,000.
Was driving vehicle at 45 mile per hour. Suddenly noticed steering wheel was off center. I did not hit a pothole or any other obstructions on the road. Steering became very loose and vehicle hard to steer. When braking the vehicle started to make squealing sound and pulled to one side. Suspension became very harsh even on good surface road.. This is a catastrophic… Read more
Was driving vehicle at 45 mile per hour. Suddenly noticed steering wheel was off center. I did not hit a pothole or any other obstructions on the road. Steering became very loose and vehicle hard to steer. When braking the vehicle started to make squealing sound and pulled to one side. Suspension became very harsh even on good surface road.. This is a catastrophic failure with no warning. Fortunately was able to get vehicle to auto repair center without getting into accident. Auto repair facility examined vehicle and showed me that engine cradle - subframe had rusted thought and broke. This caused the engine to go off center which caused the braking, steering, and suspension issues. Auto repair facility told me the vehicle was not safe to drive and made me sign a waiver to release the vehicle.
My son was driving my car to get food when the car lost control of steering and veered right towards the curb. His steering was straight but car was difficult to control. Thankfully he was only going 25 MPH. We took it to auto shop and was told engine cradle/subframe had rusted throughout. Very expensive repair. We also own a second 09 Mazda 6 that we now worry about and will get looked at.
Engine cradle/crossmember is severely deteriorated on the passenger side. Excessive rust and holes in the structure. My concern is a safety issue in driving the car and having it stay together.
Tl* the contact owns a 2009 Mazda Mazda6. While driving 45 MPH, the engine cradle fractured and there was a loss of steering function directly afterwards. A dealer was not made aware of the failure. The vehicle was towed to an independent mechanic where it was confirmed that the engine cradle had fractured. The manufacturer was not made aware of the failure. The failure mileage was approximately 110,000.
I went for an oil change and found out that the frame that holds the engine in place was completely rotted out and that my engine could fall out at any given time. Also, because of the rot, the rod that should be attached to the steering was not attached because the bolts had nothing to adhere to. This could have resulted in me driving with my daughter and losing my… Read more
I went for an oil change and found out that the frame that holds the engine in place was completely rotted out and that my engine could fall out at any given time. Also, because of the rot, the rod that should be attached to the steering was not attached because the bolts had nothing to adhere to. This could have resulted in me driving with my daughter and losing my steering and possibly getting in a fatal accident. The car is in the shop as it is not able to be driven per my mechanic for safety reasons as well as failing inspection fro this. Please contact me as soon as possible as I do not have any transportation and I work full time. I can be reached at [xxx]. Or my mechanic at hometowne auto, [xxx]. Information redacted pursuant to the freedom of information act (foia), 5 u.s.c. 552(b)(6). *tr