Nov 9, 2026back over prevention, forward collision avoidanceCrash1 injured
I was pulling into a parking space slowly when the vehicle suddenly and violently lurched forward over a cement parking barrier, over a curb , then into a tree at an upward angle, which stopped it. The engine continued running and revving into the tree after impact, even after I tried to shut it down. I somehow got it to shut down, then had to climb out and downward out of the… Read more
I was pulling into a parking space slowly when the vehicle suddenly and violently lurched forward over a cement parking barrier, over a curb , then into a tree at an upward angle, which stopped it. The engine continued running and revving into the tree after impact, even after I tried to shut it down. I somehow got it to shut down, then had to climb out and downward out of the vehicle. A kind young man helped me, climbed up into the car and was able to back it down and out for me.
NHTSA complaint #11776637
Nov 4, 2026vehicle speed control, engine
On two occasions, while coasting prior to depressing the brake to come to a stop, the engine spontaneously reved causing the vehicle to lurch forward. At which time I had to dress the brake to keep control of the vehicle.
NHTSA complaint #11775699
Oct 23, 2026power train, electrical system, engine
While driving my 2026 Lexus rx350h, the vehicle suddenly lost propulsion and would not respond to the accelerator. After coming to a stop, pressing the gas pedal did nothing. I had to shift to park, press the brake, and press the start button to get the vehicle moving again. A short time later, while making a right turn, the vehicle lost power again while still moving,… Read more
While driving my 2026 Lexus rx350h, the vehicle suddenly lost propulsion and would not respond to the accelerator. After coming to a stop, pressing the gas pedal did nothing. I had to shift to park, press the brake, and press the start button to get the vehicle moving again. A short time later, while making a right turn, the vehicle lost power again while still moving, forcing me to repeat the park–brake–start sequence in the middle of the turn. This is a serious safety issue because the hybrid system appears to shut down unexpectedly, causing loss of propulsion in traffic. The vehicle was towed to the dealer, who stated the battery was “good,” but no cause was identified. This needs investigation because the vehicle can unexpectedly lose power and require a restart while driving.
NHTSA complaint #11773204
Oct 12, 2026exterior lighting
There is an extreme dark shadow or cutoff line on the driver-side headlight
NHTSA complaint #11770680
Sep 29, 2026structure, back over prevention, forward collision avoidance
The factory-installed front spindle grille and bumper assembly on this brand-new 2026 Lexus RX 350 suffered severe thermal material failure, resulting in extensive warping, bubbling, and physical melting under normal, predictable outdoor ambient daylight parking conditions. This thermal deformation poses an immediate safety hazard because the deformed exterior structure… Read more
The factory-installed front spindle grille and bumper assembly on this brand-new 2026 Lexus RX 350 suffered severe thermal material failure, resulting in extensive warping, bubbling, and physical melting under normal, predictable outdoor ambient daylight parking conditions. This thermal deformation poses an immediate safety hazard because the deformed exterior structure directly houses the vehicle’s critical front-facing advanced driver assistance systems (adas). This includes the pre-collision safety radar sensors, pedestrian detection cameras, and proximity sensors located right behind the front Lexus emblem and grille assembly. The physical distortion of the plastic mounting housing can cause sensor misalignment, resulting in unexpected automatic emergency braking, failure of the pre-collision warning systems, or sudden blind-spot radar failure while operating the vehicle at highway speeds. Lexus corporate (case #260917000986) officially inspected the vehicle and explicitly denied all warranty and goodwill safety repairs, formally stating the vehicle's body components are melting due to a "solar event" concentration. Furthermore, the authorized Lexus dealership service management explicitly stated that this is a widespread, "common issue" that takes only 5 minutes of outdoor sunlight reflection to cause catastrophic component melting. The vehicle remains in its exact original factory configuration with under 2,000 miles. It is a severe safety defect to manufacture a modern
NHTSA complaint #11767853
Sep 25, 2026electrical system, visibility/wiper
Push brake to start. Displays car not ready low battery. Seat memory not retaining setting. Windshield wiper speed will not remove water fast enough
NHTSA complaint #11767025
Sep 14, 2026electrical system
(1)the original 12-v battery was replaced by the dealership on xxx (after 5-week and 120-mile usage) with a new one, model: 00544-mfh50, s/n [xxx], 540cca and 100 rc. (2)upon double-checking with the 2026 Lexus owner’s manual for rx450h+, on page 605, it clearly stated that when replacing the battery, its case size should be the same as the previous one (ln3) ……. With a… Read more
(1)the original 12-v battery was replaced by the dealership on xxx (after 5-week and 120-mile usage) with a new one, model: 00544-mfh50, s/n [xxx], 540cca and 100 rc. (2)upon double-checking with the 2026 Lexus owner’s manual for rx450h+, on page 605, it clearly stated that when replacing the battery, its case size should be the same as the previous one (ln3) ……. With a performance rating of cca of 603a or higher. (3)the dealership indicated the 00544-mfh50 was the right battery based on the VIN number per Lexus internal database. The database also showed another battery model: 28800-31572. (4)however, according to the battery information at [xxx], both 00544-mfh50 and 28800-31572 are listed as “does not fit” the 2026 rx450h+ vehicle. (5)the other battery, model 00544-21171lxpr, is listed as the hv 12-v battery for the 2026 rx450h+ at [xxx]. (6)also on the Lexus parts website, this 2026 rx450h+ VIN number is recognized as rx350h (base trim), a totally different vehicle. It may be possible that the Lexus 2026 rx450h+ owner’s manual (published in [xxx], 2026, for the north american market) and [xxx] have been updated with the correct 12-v battery information, while the internal Lexus database was not. It was not clear whether factories in [xxx] or elsewhere, and [xxx] dealerships, still use the possibly outdated and conflicting information for initial battery installation and replacement when needed. The discrepancies between Lexus internal information (manufacturing and de
NHTSA complaint #11764261
Sep 13, 2026service brakes
1. What component or system failed or malfunctioned and is it available for inspection upon request? Component/system: brake-by-wire hydraulic fluid loop, master cylinder assembly, or stroke simulator system on a 2026 Lexus RX 350h (VIN: [xxx]; 2,450 miles). Cash-purchased new in xxx. Weak, unrestricted hydraulic pressure. The brake pedal depresses to within 1 inch of the… Read more
1. What component or system failed or malfunctioned and is it available for inspection upon request? Component/system: brake-by-wire hydraulic fluid loop, master cylinder assembly, or stroke simulator system on a 2026 Lexus RX 350h (VIN: [xxx]; 2,450 miles). Cash-purchased new in xxx. Weak, unrestricted hydraulic pressure. The brake pedal depresses to within 1 inch of the floorboard, bottoming out against the physical mechanical extension rod limit. A reserve distance measurement confirms the vehicle fails to meet the minimum Lexus safety standard of 86 mm (3.39 inches) of pedal reserve distance. 2. How was your safety or the safety of others put at risk? Safety hazard: operating at less than 1 inch of pedal clearance instead of the factory-mandated 86 mm (3.39 inches) violates federal motor vehicle safety standards (fmvss) regarding pedal reserve margins. Imminent risk: this drastically increases the risk of a catastrophic front-end or multi-fatal high-speed collision. 3. Has the problem been reproduced or confirmed by a dealer or independent service center? Dealer visit: park place Lexus in [xxx] on xxx (at 2,450 miles) for low hydraulic pressure. No dealer dismissed despite violating the 86 mm (3.39 inches) factory specification, the service department refused to perform internal examinations 4. Has the vehicle or component been inspected by the manufacturer, police, insurance representatives or others? Inspections: inspected exclusively by park place Lexus plano. Conf
NHTSA complaint #11763946