Bearing failure in the final driven flange assembly,
2002 Honda VTX1800 problems, recalls & MPG
NHTSA has received 63 complaints from owners of the 2002 Honda VTX1800, most often about the suspension. There are 3 safety recalls for this model year.
- More complaints than 56% of 2002 vehicles
- Most reported problem: suspension (22% of complaints)
- 3 safety recalls
- 2 crashes, 3 injuries reported
Most reported 2002 Honda VTX1800 problems
Owner complaints filed with NHTSA, grouped by problem area. One complaint can mention several areas.
When owners reported problems
Complaints by the year they were filed.
Recent owner complaints
Tl* the contact owns a 2002 Honda VTX1800. While driving between 30-40 MPH, the motorcycle began to wobble when one of the handles was released. The vehicle had new tires and brakes due to other necessary repairs; however, the wobbling continued. The contact took the vehicle to interstate cycles (580 sw florida gateway dr, lake city, fl 32024; 386-758-2423) who stated that the… Read more
Tl* the contact owns a 2002 Honda VTX1800. While driving between 30-40 MPH, the motorcycle began to wobble when one of the handles was released. The vehicle had new tires and brakes due to other necessary repairs; however, the wobbling continued. The contact took the vehicle to interstate cycles (580 sw florida gateway dr, lake city, fl 32024; 386-758-2423) who stated that the wobbling only occurred while driving between 35-40 MPH. The failure did not occur at higher speeds. The dealer stated they did not believe there was a safety issue and the contact could continue operating the motorcycle. The manufacturer was not made aware of the issue. The approximate failure mileage was 27,000.
Tl* the contact owned a 2002 Honda VTX1800. While driving approximately 25 MPH, the brakes seized without warning. As a result, the contact crashed into a wall and was thrown off the vehicle. The passenger sustained a fractured arm, a head injury, and a knee injury. The driver sustained a road rash over the left side of the body. Both the driver and passenger required medical… Read more
Tl* the contact owned a 2002 Honda VTX1800. While driving approximately 25 MPH, the brakes seized without warning. As a result, the contact crashed into a wall and was thrown off the vehicle. The passenger sustained a fractured arm, a head injury, and a knee injury. The driver sustained a road rash over the left side of the body. Both the driver and passenger required medical attention. A police report was filed. The vehicle was destroyed. The manufacturer was notified of the failure. The failure mileage was 39,000. The VIN was not available.
I have replaced the final drive flange bearings 3 times now. I heard that there were some issues with this flange. First time I replaced it, I replaced the whole flange. The second and third time I replaced the bearings only. On the third time I replaced the wheel dampener inside the rear wheel. I now have 96,000 miles on my bike and check these bearings every time I change… Read more
I have replaced the final drive flange bearings 3 times now. I heard that there were some issues with this flange. First time I replaced it, I replaced the whole flange. The second and third time I replaced the bearings only. On the third time I replaced the wheel dampener inside the rear wheel. I now have 96,000 miles on my bike and check these bearings every time I change the rear tire. All three times the plastic seal was gone and a few balls out of the bearing. The cage that holds the balls in the bearing was destroyed all three times. *tr
Tl* the contact owns a 2002 Honda vtx 1800. The contact stated that while driving approximately 40 MPH, the vehicle stalled. After inspecting the vehicle, the contact noticed that the crank shaft had fractured. The vehicle was taken to an independent mechanic for diagnosis. The mechanic stated that the crank shaft would have to be replaced. The vehicle was not repaired. The approximate failure mileage was 9,000. *tr
Rear wheel final drive bearing failure. Was found when replacing the rear tire. Looking at options for the repair now.
Found while replacing rear tire,inside bearing coming apart. *tr
Removed rear wheel to perform maintenance and check rear wheel flange bearings as advised by many other owners discussions on vtxoa.com, who've experienced this identical problem. The bearings were in very rough shape and needed to be replaced. This appears to be attributed to incorrectly dimensioned Honda parts, for which they've never provided an acceptable, engineered… Read more
Removed rear wheel to perform maintenance and check rear wheel flange bearings as advised by many other owners discussions on vtxoa.com, who've experienced this identical problem. The bearings were in very rough shape and needed to be replaced. This appears to be attributed to incorrectly dimensioned Honda parts, for which they've never provided an acceptable, engineered solution, or acknowledged it for that matter. Failed component: qty of 2 bearings in item described as flange set, pn 42630-mch-000.
2002 Honda VTX1800 recalls (3)
Honda is recalling certain model year 2002 VTX1800 motorcycles manufactured between august 14 and october 4, 2001. The swingarm may not have been properly welded.
Risk: The swingarm could break while ridingcausing the rider to lose control, possibly resulting in crash.
Remedy: Honda will notify owners and dealers will inspect the weld and, if necessary, replace the swingarm free of charge. The safety recall began on september 25, 2009. Owners may contact honda motorcycle customer service at 1-866-784-1870.
On certain motorcycles, the washer for the side stand spring bolt does not have sufficient harness and could deform, which could cause the bolt to flex and eventually break during side stand operation.
Risk: A retracted side stand could drop while riding, possibly activating the side stand ignition cut-off system. If the ignition is cut, the engine will stall without warning, which could cause a crash.
Remedy: Dealers will install an improved washer and a new spring bolt and nut. The recall began on november 30, 2004. Owners should contact honda at 1-866-784-1870.
Vehicle description: motorcycles. A transmission circlip was not seated correctly and could allow gears to lock.
Risk: This condition could result in a rear-wheel lockup, increasing the risk of a crash.
Remedy: Dealers will repair the transmission on these motorcycles. All owners were contacted by telephone and all vehicles have been repaired. This campaign is 100% completed.
Other Honda VTX1800 years
Frequently asked questions
Is the 2002 Honda VTX1800 a reliable car?
Our score for the 2002 Honda VTX1800 is 3.7/10 (buy with caution). It is based on 63 owner complaints and 3 recalls compared with other 2002 vehicles and other Honda VTX1800 years.
What are the most common problems with the 2002 Honda VTX1800?
Owners most often report problems with suspension (14 complaints), transmission & powertrain (13 complaints), engine & cooling (10 complaints).
How many recalls does the 2002 Honda VTX1800 have?
3 recalls are on file with NHTSA, including: 09V362000 (structure:frame and members); 04V564000 (structure:motorcycle:kickstand/center stand); 01V134000 (power train:manual transmission).
Source: NHTSA complaints & recalls, EPA fueleconomy.gov. Data updated November 18, 2026. Complaints are unverified reports by owners.