CarProblemsDB

2004 Honda VTX1300 problems, recalls & MPG

NHTSA has received 76 complaints from owners of the 2004 Honda VTX1300, most often about the steering. There are no safety recalls for this model year.

5.8out of 10
Our verdict
Average
  • More complaints than 56% of 2004 vehicles
  • Most reported problem: steering (43% of complaints)
  • No safety recalls on file
  • 2 crashes, 2 injuries reported
How we score
Complaints76
Recalls0
MPG combined—
Safety—

Most reported 2004 Honda VTX1300 problems

Owner complaints filed with NHTSA, grouped by problem area. One complaint can mention several areas.

Steering33 (43%)
Suspension25 (33%)
Speed control (cruise, throttle)9 (12%)
Transmission & powertrain6 (8%)
Wheels5 (7%)
Electrical system4 (5%)
Other / unknown3 (4%)
Body & structure1 (1%)
Engine & cooling1 (1%)
Fuel & propulsion system1 (1%)
Tires1 (1%)

When owners reported problems

22003
242004
182005
112006
12007
52008
32009
12010
62011
12012
12014
12016
12018
12020

Complaints by the year they were filed.

Recent owner complaints

Jun 24, 2020steering
My front end wobbles bad when I'm slowing down. It happens on both city streets and highways.I replaced the front and back tires and had them balanced. Nothing changed. I've researched it and it's apparently a common problem with the 1300 models and replacing the upper and lower steering bearings with the ones used in the 1800 models fixes it. I've researched how to replace… Read more

My front end wobbles bad when I'm slowing down. It happens on both city streets and highways.I replaced the front and back tires and had them balanced. Nothing changed. I've researched it and it's apparently a common problem with the 1300 models and replacing the upper and lower steering bearings with the ones used in the 1800 models fixes it. I've researched how to replace them and it requires special tools and the race for each bearing needs to be pressed in at a shop. I noticed that only 75 complaints have been registered. I still can't believe there's not a recall for this issue. I've seen a lot of people complaining about this online. I've had this issue for years and it keeps getting worse. I'm going to have to pay to get them replaced soon and I'm sure it's not going to be cheap after reading about how to do it. Thank you. *tr

NHTSA complaint #11330658
Mar 4, 2018suspension

There is a severe front end wobble when decelerating from 50+ MPH. The entire front end shakes to the point that control is almost lost. It is also causing the tire on the front to wear unevenly and at a very fast rate. The bike has less than 6000 miles on it as of march of 2018.

NHTSA complaint #11076127
May 24, 2016steering

On 2004 Honda vtx1300c motorcycle, front tire develops a severe shimmy when decelerating from 40-50 MPH. Have reported problem to Honda repair center and tech's state they do not know cause of problem where many forums one stated to replace front wheel bearings with vtx 1800 tapered bearings.

NHTSA complaint #10870485
Jul 10, 2014suspension, power train
Removed the front and rear wheels to have new tires installed. Noticed the final drive flange bearings seal toward wheel, was torn open as if the seal had melted and the bearings were dry and very rough to turn. Problem is, I replaced the bearings and felt resistance when turning the new bearings. Read about this problem in one of the forums, removed the new bearings and… Read more

Removed the front and rear wheels to have new tires installed. Noticed the final drive flange bearings seal toward wheel, was torn open as if the seal had melted and the bearings were dry and very rough to turn. Problem is, I replaced the bearings and felt resistance when turning the new bearings. Read about this problem in one of the forums, removed the new bearings and ordered a second set. Measured the bearing fit in the flange and it was .001" too close at the top and .002" at the bottom. Had the flange machined to correct clearance and installed new bearings. Just like it should have been from the factory, and I am very glad I found the problem before a deadly or costly incident occurred. *tr

NHTSA complaint #10609741
Apr 2, 2012wheels

This part is mounted to the rim of the motorcycle and connects to the drive shaft . The housing that the flange bearings press into is bored to tight causing the bearings to be crushed and not be smooth like they should be . I purchased brand new bearings and had the dealer put them in having the same problem as before . *tr

NHTSA complaint #10453792
Sep 27, 2011steering
Tl* the contact owns a 2004 Honda VTX1300. The contact stated that the handle bar wobbled excessively when driving 35 MPH and above. The contact changed the tires on the vehicle but that did not correct the failure. The dealer inspected the vehicle and stated that the steering stem bearings failed and needed replacement. The dealer stated this was a known problem. The VIN was… Read more

Tl* the contact owns a 2004 Honda VTX1300. The contact stated that the handle bar wobbled excessively when driving 35 MPH and above. The contact changed the tires on the vehicle but that did not correct the failure. The dealer inspected the vehicle and stated that the steering stem bearings failed and needed replacement. The dealer stated this was a known problem. The VIN was not available. The failure and current mileage was 6,200.

NHTSA complaint #10427637
Sep 3, 2011steering, unknown or other
Just purchased this bike I'm 2nd owner, and while inspecting this bike I noticed that left side of front tire was completely worn but right side had tread, so I replaced with new dunlop tires front and rear and after driving having only 300 miles on bike one day I let go of left hand grip at 40 MPH to scratch my nose and the bike front wheel began to wobble enough to really… Read more

Just purchased this bike I'm 2nd owner, and while inspecting this bike I noticed that left side of front tire was completely worn but right side had tread, so I replaced with new dunlop tires front and rear and after driving having only 300 miles on bike one day I let go of left hand grip at 40 MPH to scratch my nose and the bike front wheel began to wobble enough to really scare me. I called Honda they said we know nothing about this problem, however getting on line with several vtx owners web-sites and discovered that this is a problem with the vtx 1300. I have new tires and vtx with less than 8000 miles on bike, seems like a manufacturing defect. *tr

NHTSA complaint #10423140
Jul 25, 2011steering, suspension

There is a front fork wobble on my 2004 Honda vtx motorcycle. This is coupled with extremely fast wear on the front tires. The wobble is most noticeable between 20 - 50 MPH, and more prevalent when coasting to a stop. It is bad enough at time to cause a control issue when going around turns. *tr

NHTSA complaint #10414996

2004 Honda VTX1300 recalls (0)

No safety recalls have been issued for the 2004 Honda VTX1300.

Other Honda VTX1300 years

Frequently asked questions

Is the 2004 Honda VTX1300 a reliable car?

Our score for the 2004 Honda VTX1300 is 5.8/10 (average). It is based on 76 owner complaints and 0 recalls compared with other 2004 vehicles and other Honda VTX1300 years.

What are the most common problems with the 2004 Honda VTX1300?

Owners most often report problems with steering (33 complaints), suspension (25 complaints), speed control (cruise, throttle) (9 complaints).

How many recalls does the 2004 Honda VTX1300 have?

There are no NHTSA safety recalls for this model year.

Source: NHTSA complaints & recalls, EPA fueleconomy.gov. Data updated November 18, 2026. Complaints are unverified reports by owners.