Jun 18, 2023structure, wheels, service brakes
Truck has no spare tire, totally missing the assembly and bracket originally used to hold the tire (have a junk one in the bed). The crossmember under the truck is about 50% intact is getting ready to fall off. Brake lines and rocker panals rotted out as well. Holes in the frame starting and a patch was already needed on the frame (drivers side rear). As well as a loose bed.… Read more
Truck has no spare tire, totally missing the assembly and bracket originally used to hold the tire (have a junk one in the bed). The crossmember under the truck is about 50% intact is getting ready to fall off. Brake lines and rocker panals rotted out as well. Holes in the frame starting and a patch was already needed on the frame (drivers side rear). As well as a loose bed. The truck is very clean on top but underneath is rotting away like it has 200000 miles on it(truck is at 77,000). I want to remove the rust and coat it but im scared of punching through cause spots are brittle.
NHTSA complaint #11527592
Oct 31, 2014suspension, power train, service brakesCrash
The vehicle was riding very rough as though some one was knocking on the engine with a hammer. I took it to the dealer ( gene evans Ford ) which is where I purchase it from, all I was told was that is what a truck suppose to sound like. I continue to complain about the roughness of the truck, no one was concern about my complaints. Now here it is september 2010, I take my… Read more
The vehicle was riding very rough as though some one was knocking on the engine with a hammer. I took it to the dealer ( gene evans Ford ) which is where I purchase it from, all I was told was that is what a truck suppose to sound like. I continue to complain about the roughness of the truck, no one was concern about my complaints. Now here it is september 2010, I take my truck for a oil change and tire rotation in new jersey and the repair shop writes up a invoice stating my rear axle needs an adjustment. The Ford dealerships has service my vehicle all this time and to me they made sure this would not be detected. I had an accident on january 4,2014 and my axel is now bent from a small impact because it was no good from the day I bought the truck. Auto nation was going to repair the vehicle and when [xxx] the manager saw the invoices with the diagnosis about the adjustment of the axel and the 2010 date on it, someone there told state farm that I did not want them to fix the truck. In all honesty they are the only one I wanted to handle this repair so they could give me a brand new axel or a brand new vehicle instead they lied to everyone and walked away from the problem. I had and have submitted correspondents to Ford also I had ask to speak to Ford representatives at several dealerships, I was told because of the high mileage there is nothing they can do. The most peculiar thing is that all the dealership made sure that no one address the problem with the axle although the
NHTSA complaint #10651711
Jun 15, 2014suspension, structure, service brakes
Lost all brakes while driving. Found all brake lines rotted and in need of replacement. While replacing lines, noticed excessive frame and cross member deterioration from rust. Bed cross members completely rusted away and rear spring hangers rusted so bad they are ready to break off. *js
NHTSA complaint #10598345
Jul 18, 2013service brakes
Bought truck used at 66018 miles truck needed front rotors turned on 2/27/10 @ 79730 miles (rotors warped) replaced front rotors on 12/31/11 (rotors warped) truck again needs front rotors turned on 7/18/13 @103055 miles (rotors warped) to date at approximately every 12,500 miles the front rotors need to be turned. The same brake pads are on from when I bought the truck with 37,037 miles on them. *tr
NHTSA complaint #10525675
Feb 15, 2013service brakes
Tl* the contact owns a 2003 Ford Ranger. The contact stated that the ABS warning light illuminated. The vehicle was taken to a private mechanic however, the failure was unable to be diagnosed. The manufacturer was made aware of the failure. The vehicle was not repaired. The approximate failure mileage was 78,000 and the current mileage was 96,000.
NHTSA complaint #10498236
Jan 17, 2012service brakes, hydraulicCrash
Tl* the contact owns a 2003 Ford Ranger. While driving approximately 5 MPH the consumer's son depressed the brake pedal and his foot unintentionally depressed the accelerator pedal due to the close proximity of both pedals. The driver crashed into a fence. The vehicle was not taken to the dealer for diagnostic testing. The vehicle was not repaired. The approximate failure… Read more
Tl* the contact owns a 2003 Ford Ranger. While driving approximately 5 MPH the consumer's son depressed the brake pedal and his foot unintentionally depressed the accelerator pedal due to the close proximity of both pedals. The driver crashed into a fence. The vehicle was not taken to the dealer for diagnostic testing. The vehicle was not repaired. The approximate failure mileage was 18,000. Updated 02/14/12*lj updated 02/22/12
NHTSA complaint #10444018
Dec 29, 2011suspension, service brakes, hydraulic
The right rear brake drum had a 2" piece rusted out, the left rear brake had rusted so bad it had broken loose in the drum and the shackles had rusted completely off. The vehicle has never been left outside always garaged, never been in high water or exposed to a high level off salt. The under carriage is always washed after road salt has been applied. The under carriage has… Read more
The right rear brake drum had a 2" piece rusted out, the left rear brake had rusted so bad it had broken loose in the drum and the shackles had rusted completely off. The vehicle has never been left outside always garaged, never been in high water or exposed to a high level off salt. The under carriage is always washed after road salt has been applied. The under carriage has more rust than normal for a vehicle taken care of as this one. The mechanic even commented on it. In 2010 the rear shocks had to be replaced because they had been rusted through. *kb
NHTSA complaint #10441672
Dec 19, 2011service brakes, hydraulic
Brake rotors sold by advance auto parts as an "exact fit" for this vehicle were installed without any problems and all associated components for a brake repair (pads, calipers, bearings, seals, ABS rings) were also installed and seemed to fit perfectly. After assembly I noticed that the brake pads were only partially bearing on the brake rotor, with the pads overlapping the… Read more
Brake rotors sold by advance auto parts as an "exact fit" for this vehicle were installed without any problems and all associated components for a brake repair (pads, calipers, bearings, seals, ABS rings) were also installed and seemed to fit perfectly. After assembly I noticed that the brake pads were only partially bearing on the brake rotor, with the pads overlapping the edge of the rotors. I did not notice this condition until both new front rotors had been replaced and all components except the tires/wheels had been replaced. Upon further research, the rotors sold as an "exact fit" (selected for me by the counter man at my local advance auto parts store) were approximately 1 inch smaller in diameter as the original equipment rotors. I contacted advance customer service to inform them of this problem and they denied any responsibility for installation of improper parts. Several reviews posted on the store's website indicate that other people have installed these rotors and are driving around with them despite the fact they are not the proper rotors for this 4 wheel antilock brake vehicle (they do fit rangers with rear wheel antilock brakes). This is a murphy's law situation in which a consumer can install these parts and drive around with them, unaware of the potential for brake failure. The final installation looks normal and I would not have noticed unless I had made a close inspection and found that the brake pads were not in full contact with the rotor surface
NHTSA complaint #10440440
May 15, 2011service brakes, hydraulic
2003 Ford Ranger steel brake line rotted and failed. 26,000 miles well maintained vehicle. Cause brake failure. Fortunately no accident incident. Steel line rotted at fitting over rear axle where it attaches to flex line to the axle housing. Other rust and corrosion issues plague this vehicle. *tr
NHTSA complaint #10400902
Mar 27, 2011service brakes, hydraulic
This problem has appeared all of a sudden without warning. Brakes fade at low speeds. The pedal sinks to the floorboard. This condition occurs randomly. I have topped off the brake fluid reservoir. This has not changed the situation. I've reviewed the internet for potential remedies and have discovered many others with the same or similar problem. *tr
NHTSA complaint #10392991
Dec 21, 2010service brakes, hydraulic, structure, vehicle speed controlCrash
I own a 2003 Ford Ranger I bought new. On november 26 2010 I pulled into the parking lot @ work and my clutch and brake pedals fell to the floor causing a minor crash. The pivot bracket that holds the steel pedals is made from cast aluminum. I have been a aluminum welder for over 10 years and in my opinion this bracket is very substandard. I searched the web and found that… Read more
I own a 2003 Ford Ranger I bought new. On november 26 2010 I pulled into the parking lot @ work and my clutch and brake pedals fell to the floor causing a minor crash. The pivot bracket that holds the steel pedals is made from cast aluminum. I have been a aluminum welder for over 10 years and in my opinion this bracket is very substandard. I searched the web and found that other people had the same thing happen on rangers and other trucks and Ford cars. If I was on the road this could have been much worse. I sent pictures and a piece of the bracket to a recall investigator. He said its not a common failure since he cant find any complaints. *tr
NHTSA complaint #10371998
Oct 11, 2010service brakes, hydraulic, vehicle speed control
As I slowly pulled my 2003 Ford Ranger into a parking space at work this morning with my foot on the brake the truck suddenly accelerated. I applied the brake harder and the truck stopped. I verified that I did not have my foot on both the brake and accelerator, only on the brake. *tr
NHTSA complaint #10359971
May 12, 2010parking brake
1. No warning or event. 2. Parking brake cable sheared off by leaf spring. Happened when truck was loaded with 700 lbs in bed of truck ( within rated capacity ). Resulting in loss of parking brakes and possible runaway vehicle. 3. Replaced broken cable but failure will happen again unless the cable guide is modified to prevent the spring from chopping into the cable ( needs raised an inch ). *tr
NHTSA complaint #10330215
Mar 9, 2010service brakes, hydraulic, vehicle speed control
Brake pedal and accelerator pedal toooo close together! Distance of 2 & 1/4 " causes contact with accelerator when brake is being applied numerous incidents since purchased vehicle in 03.. I wear a size 9 &1/2 to a 10 & 1/2 size shoe. Even though I am aware of the problem, I find that it keeps happening repeatedly; but I only bumped a curb once with my tires. *tr
NHTSA complaint #10318152
Oct 8, 2009service brakes, hydraulic
During wet weather, rear brake locks up when brakes are applied. Causing skidding and lose of control. First time this happen my local Ford dealership referred to this as a rear brake lock problem, and replaced rear brake components, after that when it happened again I was told that the problem was due to moisture getting into the brake parts and that if I wanted this fixed I… Read more
During wet weather, rear brake locks up when brakes are applied. Causing skidding and lose of control. First time this happen my local Ford dealership referred to this as a rear brake lock problem, and replaced rear brake components, after that when it happened again I was told that the problem was due to moisture getting into the brake parts and that if I wanted this fixed I would have to pay for the fix it. The first time I was told that there was a service bulletin out on this and that's why it got fixed,now I'm told no such thing exist.first time with problem truck had about 26,000 to 30,000 miles on it seems funny that at 60,000 I would have the same problem. *tr
NHTSA complaint #10286730
May 14, 2009suspension, service brakes, hydraulic
Tl*the contact owns a 2003 Ford Ranger. While driving approximately 35 MPH on normal road conditions, the contact heard a loud grinding noise when the brake pedal was depressed. The vehicle was taken to an independent mechanic for inspection. The failure was contributed to the manufacturer installing incorrect hubs on the vehicle. The service repair cost was estimated at… Read more
Tl*the contact owns a 2003 Ford Ranger. While driving approximately 35 MPH on normal road conditions, the contact heard a loud grinding noise when the brake pedal was depressed. The vehicle was taken to an independent mechanic for inspection. The failure was contributed to the manufacturer installing incorrect hubs on the vehicle. The service repair cost was estimated at $800. The front brake pads were replaced and the contact was advised to not drive the vehicle due to the potential safety hazard. The vehicle has not been repaired. The manufacturer was notified, but there were no resolutions. The failure and current mileages were 60,000.
NHTSA complaint #10268749
Mar 21, 2009service brakes, hydraulic
The first time the brakes locked up and didn't release I was coming down the street where I live going less than 15 MPH and when we hit the brakes my truck didn't stop and we went sideways trying to stay out on-coming traffic. This last time it locked up I was already on the brakes going less than 15 MPH and I came within an inch of hitting the car in front of me. I have brand… Read more
The first time the brakes locked up and didn't release I was coming down the street where I live going less than 15 MPH and when we hit the brakes my truck didn't stop and we went sideways trying to stay out on-coming traffic. This last time it locked up I was already on the brakes going less than 15 MPH and I came within an inch of hitting the car in front of me. I have brand new tires and brakes all the way around. This should not be happening. There is something messed up in the computer my ABS light never even came on while I was sliding. *tr
NHTSA complaint #10262625
Oct 2, 2008service brakes, hydraulic, parking brake
When releasing the parking brake during wet conditions the linings stick to the drums, this is especially a problem in the winter months as they will freeze. This also causes the brakes to be extremely sensitive during the first 5 miles (approx) of braking. When the vehicle service brakes are applied the rear wheel grab hard and the ABS tries to release them and can't. I… Read more
When releasing the parking brake during wet conditions the linings stick to the drums, this is especially a problem in the winter months as they will freeze. This also causes the brakes to be extremely sensitive during the first 5 miles (approx) of braking. When the vehicle service brakes are applied the rear wheel grab hard and the ABS tries to release them and can't. I have had two faults on the ABS due to this. This is not a one time thing this happens so frequently that during wet/freezing conditions I actually use a 4x4 wood block to hold the vehicle in place.. *tr
NHTSA complaint #10244201
Jun 2, 2008service brakes, hydraulicCrash1 injured
Brake and gas pedals are too close, and hit both at same time. Unable to make emergency stop and went through red light. Suspect this to be cause of several accidents recently--some fatal ! *tr
NHTSA complaint #10229624
Jun 13, 2007service brakes, hydraulic
2004 Ford Ranger- tsb 4-17-9 * grabbing condition from rear drum brakes customer states that the problem is more pronounced in the rain**cc the consumer provided invoice for repair and documentation pertaining to defect of vehicle. *tr
NHTSA complaint #10194331
Mar 8, 2007service brakes, hydraulic, fuel system, other
Two things on my 2003 Ford Ranger supercab 2 wd : 1.) front brakes are bad, and continue to be bad, due to bad design of front rotors. The original oem rotors fail, due to warping, resulting in a most the aggravating pulsing when brakes are applied. This results in inadequate stopping when needed, and could cause a very severe accident !!! 2.) the fuel cutoff safety… Read more
Two things on my 2003 Ford Ranger supercab 2 wd : 1.) front brakes are bad, and continue to be bad, due to bad design of front rotors. The original oem rotors fail, due to warping, resulting in a most the aggravating pulsing when brakes are applied. This results in inadequate stopping when needed, and could cause a very severe accident !!! 2.) the fuel cutoff safety switch ( whatever it is called) above the front passenger leg area (on wall -inside cab) is defective, causing serious consequences to the occupants, due to vehicle losing all power during operation. This has happened to me now 10+ times in the last 6 months. Sometimes while in heavy traffic, with no where to go when all power is lost, gauges go wacky,lose steering control, etc. As soon as the switch is "reset", by pushing in on it from the top of it, and turning vehicle key to on position for 3-5 seconds, then back off ( per owner's manual) the vehicle seems fine,,,until, randomly it happens again when you least expect it. The manual says this switch is for "safety" concerns , when after an accident, it shuts off fuel supply, etc....but my truck has never been in any accident whatsoever, and this device is now becoming a great potential accident producer in itself !!!!! The "incident date" is multiple dates !!!!! And they are still continuing as of today 8 march 2008 * I have been told by mechanics the oem brakes rotors are defective, but since
NHTSA complaint #10184511
Nov 13, 2006service brakes, hydraulic
Dt*: the contact stated while applying the brake pedal, a sound of metal on metal was heard. The vehicle was pulled over and the contact noticed the pad separated from the caliper holder on the front passenger side. An independent repair shop replaced the passenger front brake pad. Updated 12/12/2006 - *nm
NHTSA complaint #10173328
Nov 29, 2005service brakes, hydraulic
Dt: the contact took vehicle to the dealership to have the brake pads changed. The mechanic determined that the front brake rotors where corroded and pitted. The rotors had to be replaced. *ak updated 01/04/06. *jb
NHTSA complaint #10143915
Jul 11, 2005service brakes, hydraulic
I have had to take this vehicle into the dealership for braking problems 7 times now. There has been a constant vibration upon braking. The vibration has become so bad at times, it is difficult to hold the steering wheel. The vibration is being caused by warped rotors. The rotors have been turned and replaced at least 2 times each. I am now on my third set of rotors. … Read more
I have had to take this vehicle into the dealership for braking problems 7 times now. There has been a constant vibration upon braking. The vibration has become so bad at times, it is difficult to hold the steering wheel. The vibration is being caused by warped rotors. The rotors have been turned and replaced at least 2 times each. I am now on my third set of rotors. The last time I brought the truck back from dealership, it was obvious the caliper was sticking. Ford even had an engineer look at the truck. The engineer looked at the truck 100 miles before the caliper was sticking. He couldn't come up with any reason for the warpage. On taking my truck back to the dealership this past time, the brake pedal started going to the floor and was making a whooshing sound upon depressing the pedal. I was afraid it wouldn't stop. I am now afraid of driving this truck because I don't know what will happen with the brakes next.
NHTSA complaint #10128355
Jun 19, 2005service brakes, hydraulic
(1) I was in heavy stop and go traffic, keeping with the flow of the traffic. At one point I had to slam on my brakes. The truck felt like it didn't want to stop. The brakes felt "greasy" and I had to avoid rear ending the car in front of me. (2) brake failure due to overheating? Rotors were warped after that. Truck shuddered when applying the brake. (3) a Ford dealer… Read more
(1) I was in heavy stop and go traffic, keeping with the flow of the traffic. At one point I had to slam on my brakes. The truck felt like it didn't want to stop. The brakes felt "greasy" and I had to avoid rear ending the car in front of me. (2) brake failure due to overheating? Rotors were warped after that. Truck shuddered when applying the brake. (3) a Ford dealer turned the rotors at 25,632 miles. At around 28,000 the shuddering has returned during braking. Dealership says it will not fix the problem again under warranty.
NHTSA complaint #10125741
Feb 16, 2005suspension, service brakes, hydraulic
When braking at any speed the consumer would hear a squeaking noise. The consumer was informed that front brake rotors were worn. The problem was not resolved. *ak the vehicle also displayed a loud clunk that Ford was under the front end. The noise appeared to be upon shifting especially when going over bumps or when turning sharply. *sc the drive belts were replaced
NHTSA complaint #10107159
Jan 27, 2005service brakes, hydraulic, vehicle speed control
The vehicle has been taken to the dealer on three separate occasions for brake failure and accelerator problems. *nm *jb
NHTSA complaint #10109438
Jan 5, 2005service brakes, hydraulic, vehicle speed control
Consumer stated the pedals are so close together that sometimes when driving he hits both pedals at one time. *ak the consumer stated that the brake needs to be moved 2 to 2 1/2 inches to the left. *tc
NHTSA complaint #10101272
Mar 31, 2004service brakes, hydraulic
When coming to a stop with foot pressed on brake pedal vehicle continued to roll. Consumer had to pump the brakes real fast to get vehicle to stop. Dealer stated consumer was pressing gas and brake pedals at the same time. The driver did not agree. *ak
NHTSA complaint #10065347
Dec 11, 2003service brakes, hydraulicCrash
While coming to a stop consumer noticed brakes became spongy. On december 6, 2003 when the owner applied the brakes to make a stop, the brakes performed erratically. Extended stopping distance was necessary for the brakes to perform efficiently.*ak vehicle was stopped at a stop sign with the driver's foot depressing the pedal. The brake pedalwent all the way to the floor… Read more
While coming to a stop consumer noticed brakes became spongy. On december 6, 2003 when the owner applied the brakes to make a stop, the brakes performed erratically. Extended stopping distance was necessary for the brakes to perform efficiently.*ak vehicle was stopped at a stop sign with the driver's foot depressing the pedal. The brake pedalwent all the way to the floor board and the vehicle rolled into the intersection. Vehicle collided with another vehicle. 2003 Ford Ranger is in the shop and the mechanics are aware that the brakes need to be checked out.*mr
NHTSA complaint #10050424
May 29, 2003service brakes, hydraulicCrash
When applying brakes while driving stopping distance was greatly increased and brake pedal was hard to depress. Took vehicle to dealer who could not diagnose any problem. One day, consumer attempted to apply brakes, but pedal was very hard, vehicle then collided with another vehicle. *ak
NHTSA complaint #10021856