50 owners reported transmission & powertrain problems — 10% of all 515 complaints about the 2001 Ford Ranger.
Transmission & powertrain complaints by Ford Ranger year
20263
202519
202441
20235
202218
202160
202051
201992
20115
20101
20093
20081
20072
20064
20058
200427
200316
200261
200150
200069
What owners report
Jan 10, 2012power train
On the date listed, the transmission failed to go into reverse. The repair shop told me that the Ford Ranger is notorius for transmission problems that include: 1. Failing to go into reverse, 2. Failing to go into forward after stopping, 3. Jumping gears, or slow gear changes. This information has been confirmed by other shops as well as a google search. In fact, the… Read more
On the date listed, the transmission failed to go into reverse. The repair shop told me that the Ford Ranger is notorius for transmission problems that include: 1. Failing to go into reverse, 2. Failing to go into forward after stopping, 3. Jumping gears, or slow gear changes. This information has been confirmed by other shops as well as a google search. In fact, the problem may be severly under reported as Ford dealerships may list as other problems and smaller shops may not link the problem. This is a very costly repair, so I'm sure Ford does not want to be forced to recall all of the rangers, and it appears that this problem does affect several years of rangers on the market. Please google Ford Ranger transmissions, and look at the amount of complaints. Look at the blogs and groups that are complaining about this issue, which if it involves the vehicle moving forward, could impact the passengers if the problem occurs on a freeway entrance ramp or subdivision streets. This is a widepsread problem that is under reported and is not being addressed, and it needs to be examined in more detail. *tr
NHTSA complaint #10443297
Jun 13, 2010power train
I was driving my 2001 Ford Ranger down the road, I pushed in the clutch to change gears and something popped. My clutch pedal was now incapable of actuating the clutch to change gears or put it in gear after I put it in neutral. I had to jerk the gearshift out of gear into neutral and stop as traffic had stopped for a red light. We had to push the truck out of the way of… Read more
I was driving my 2001 Ford Ranger down the road, I pushed in the clutch to change gears and something popped. My clutch pedal was now incapable of actuating the clutch to change gears or put it in gear after I put it in neutral. I had to jerk the gearshift out of gear into neutral and stop as traffic had stopped for a red light. We had to push the truck out of the way of traffic. After examining the engine compartment, I saw that the clutch hydraulic line that attaches to the clutch master cylinder had popped off. The roll pin that secures that particular connection had worked itself loose and allowed the line to pop off. The next day I removed the clutch master cylinder, reservoir, and hydraulic line. All the parts were still good, so I bench bled the assembly, installed, and bled the clutch slave cylinder. Upon further investigation, I read that Ford had issued a technical service bulletin regarding this exact problem and issued a free fix if a customer has this problem and the truck is under warranty. Well, my truck isn't under warranty and fixing it myself was a hassle. I don't need my clutch parts failing like this when I'm crossing an intersection nor does anyone else. It's a major distraction that can cause an accident. Even if this problem doesn't qualify as a recall issue, they could at least mail me a cotter pin with a letter telling me to look out for this problem. The tsb number is 01-24-1 dated 10/01/2001. *tr
NHTSA complaint #10336010
Mar 3, 2010fuel system, gasoline, power train, vehicle speed control
Information redacted pursuant to the freedom of information act (foia), 5 u.s.c. 552(b)(6) I was driving my Ford Ranger, (2001 xlt automatic transmission) in an attempt to warm up the truck as the transmission had been acting up as it was not shifting as well as it should into higher gears. The truck was having trouble going past 10-15 MPH before shifting gears and was… Read more
Information redacted pursuant to the freedom of information act (foia), 5 u.s.c. 552(b)(6) I was driving my Ford Ranger, (2001 xlt automatic transmission) in an attempt to warm up the truck as the transmission had been acting up as it was not shifting as well as it should into higher gears. The truck was having trouble going past 10-15 MPH before shifting gears and was going much slower than normal. As I drove around the parking lot where I work to warm up the truck, it was not going as fast as normal and it warmed up in about 20 minutes. I checked the transmission fluid and it was at a normal level. I turned off the truck and checked the oil which was in the normal range. I proceeded to go to qt and get some gas and on my way back to work, I went to stop at a red light and was almost stopped when the engine started revving up and took off at a very high rate of speed while my foot was pushing the brake pedal down as hard as I could. I then could not slow it down at the next light enough to make the right turn safely. I had to make a u turn with both feet on the brakes and after putting the truck in neutral and pushing the emergency brake, I had to put the truck into neutral and cut off the engine to turn into the parking lot where I work. I thought maybe I had hit the accelerator by accident and had a co-worker watch as I cranked up the truck in neutral. The tires were spinning like crazy and the rpms were way up. I had to turn the car off quickly as with the parking brak
NHTSA complaint #10316276
Feb 16, 2010power train
Trans shift problem 1st to 2nd shift hard shift started about 3 months ago 2001 Ford Ranger 4x4 ,started only doing it on cold starts now does it all the time cold or hot have to let off accelerator to get to shift or manually shift from shift lever.overdrive light flashes as soon as it slams into gear ,trans slip. Ford has had on going problems with trans. Been a auto tech… Read more
Trans shift problem 1st to 2nd shift hard shift started about 3 months ago 2001 Ford Ranger 4x4 ,started only doing it on cold starts now does it all the time cold or hot have to let off accelerator to get to shift or manually shift from shift lever.overdrive light flashes as soon as it slams into gear ,trans slip. Ford has had on going problems with trans. Been a auto tech for Ford for many years its time to have Ford look at the on going problems. *tr
NHTSA complaint #10310867
Oct 23, 2001power train, electrical system1 injured
Problem 1- vehicle regularly stalls or idles so low power steering and power brakes are lost. Problem occurs when slowing for and entering corners and when coming to a stop. Local dealership tells me this is normal and to not worry about it. Problem 2- clutch does not engage when pedal is released. After a moment it releases on its own accord and truck jerks forward… Read more
Problem 1- vehicle regularly stalls or idles so low power steering and power brakes are lost. Problem occurs when slowing for and entering corners and when coming to a stop. Local dealership tells me this is normal and to not worry about it. Problem 2- clutch does not engage when pedal is released. After a moment it releases on its own accord and truck jerks forward violently. Clutch slave cylinder has already been replaced once. *ak