Vehicle regularly stalls while driving, going down hills and any random time at highway speeds, while in traffic, while stopped at traffic controls. This problem happens repeatedly and is apparently related to the “pump mounted driver”, which is prone to failure due to inadequate design for the use and environment. It creates random failures of the pump to deliver fuel.
2000 Chevrolet Silverado 3500 HD problems, recalls & MPG
NHTSA has received 6 complaints from owners of the 2000 Chevrolet Silverado 3500 HD, most often about the brakes. There is 1 safety recall for this model year.
- More complaints than 12% of 2000 vehicles
- Most reported problem: brakes (50% of complaints)
- 1 safety recall
Most reported 2000 Chevrolet Silverado 3500 HD problems
Owner complaints filed with NHTSA, grouped by problem area. One complaint can mention several areas.
When owners reported problems
Complaints by the year they were filed.
Recent owner complaints
During operation of vehicle, power braking and steering is lost. Vehicle fails to stop or steer easily and therefore will not stop in safe distance. Occurs usually at slow speeds but increases stopping distance and requires extreme strength to turn. May happen several times during short trip. Vehicle has hydraulic assist (steering pump) brake system. Definitely unsafe and appears canada has already acted on.
We have purchased a chevy 3500hd dump truck. We have known this truck for a few years and the brake lights have been stuck on and no signals for two years. We were told about the recall for the multi-function switch for other 2000 truck models, I.e. The 2000 blazer, because of this situation. We feel that our truck should be included in the recall because it has the same… Read more
We have purchased a chevy 3500hd dump truck. We have known this truck for a few years and the brake lights have been stuck on and no signals for two years. We were told about the recall for the multi-function switch for other 2000 truck models, I.e. The 2000 blazer, because of this situation. We feel that our truck should be included in the recall because it has the same problems as the other trucks made by chevy in the same year and suspect it is the same part. We have been told that the part is $400 and $250 to replace in labor. We don't feel that we should have to go through the cost and then get reimbursed for the cost when it is finally recalled. In the process of finding out what the problem was, hundreds of dollars have been spent on useless "fixes" because there is no recall for this particular truck and no one thought about that particular switch being bad until we were talking to a blazer owner of the same year that told us about the recall on his truck. We investigated a little more and there are more than the 2000 blazer with this part being recalled. *tr
Antilock brakes always activate when braking at slow speeds, was told by chevy dealer there is a recall but not on my vehicle. *nm
The vehicle was weighed with a medium sized vehicle in tow and the weight was 12140, as per GM the trucks max gvw rating is 11,000, the vehicle was being used overweight of specs which caused premature brake wear, the vehicle was sold to the consumer with the understanding that the vehicle would be used as a tow truck, the consumer believes that GM is selling trucks with… Read more
The vehicle was weighed with a medium sized vehicle in tow and the weight was 12140, as per GM the trucks max gvw rating is 11,000, the vehicle was being used overweight of specs which caused premature brake wear, the vehicle was sold to the consumer with the understanding that the vehicle would be used as a tow truck, the consumer believes that GM is selling trucks with wrecker provisions but are too light to be tow trucks or they are selling trucks with defective brake systems, on one occasion the vehicle brake pedal went to the floor while the driver was braking and failed causing the truck to rear end another vehicle. Nlm
City of detroit bought 8 trucks that have developed steering problem. A plastic collar that holds steering column to firewall kept coming off and causing rub on the frame.*ak
2000 Chevrolet Silverado 3500 HD recalls (1)
Vehicle description: chassis cabs. The tapered hole in the drag link end that attaches to the pitman arm tapered ball stud may be machined too deep causing the hole to be oversized. A drag link with an oversized hole may not "seat" the pitman arm tapered ball when assembled. This could cause higher than normal friction between components during operation, and possibly result in joint separation or a broken ball stud.
Risk: If the joint separated or the ball stud brake while the vehicle was moving, steering control would be lost.
Remedy: Dealers will inspect the steering linkage assembly and, if necessary, replace the drag link and the pitman arm.
Other Chevrolet Silverado 3500 HD years
Frequently asked questions
Is the 2000 Chevrolet Silverado 3500 HD a reliable car?
Our score for the 2000 Chevrolet Silverado 3500 HD is 8.3/10 (good choice). It is based on 6 owner complaints and 1 recall compared with other 2000 vehicles and other Chevrolet Silverado 3500 HD years.
What are the most common problems with the 2000 Chevrolet Silverado 3500 HD?
Owners most often report problems with brakes (3 complaints), body & structure (2 complaints), engine & cooling (2 complaints).
How many recalls does the 2000 Chevrolet Silverado 3500 HD have?
1 recall is on file with NHTSA, including: 00V054000 (steering:linkages:drag:link:connection).
Source: NHTSA complaints & recalls, EPA fueleconomy.gov. Data updated November 18, 2026. Complaints are unverified reports by owners.