Glass sun roof exploded spontaneously while driving at freeway speeds.
2009 BMW 135I problems, recalls & MPG
NHTSA has received 29 complaints from owners of the 2009 BMW 135I, most often about the fuel & propulsion system. There are 4 safety recalls for this model year. The EPA rates it at about 20 MPG combined.
- More complaints than 50% of 2009 vehicles
- Most reported problem: fuel & propulsion system (55% of complaints)
- 4 safety recalls
Most reported 2009 BMW 135I problems
Owner complaints filed with NHTSA, grouped by problem area. One complaint can mention several areas.
When owners reported problems
Complaints by the year they were filed.
Recent owner complaints
Tl* the contact owns a 2009 BMW 135I. The contact stated that upon taking his vehicle for service at otto's BMW (1275 wilmington pike, west chester, pa 193820) he was informed that the roll over control module was defective. The contact called the manufacturer and was informed that the VIN was not under recall. The contact was provided an estimate for the repair which he… Read more
Tl* the contact owns a 2009 BMW 135I. The contact stated that upon taking his vehicle for service at otto's BMW (1275 wilmington pike, west chester, pa 193820) he was informed that the roll over control module was defective. The contact called the manufacturer and was informed that the VIN was not under recall. The contact was provided an estimate for the repair which he declined. The vehicle was not yet repaired. The approximate failure mileage was 57,000. I took my car to otto's BMW for a state inspection, not for any other service, and otto's did not inform me that the roc module had failed. I found out the module had failed by using my code reader. When I tried to start my car to take it for the state inspection, I found the battery had died. When I replaced the battery, I found that the roc module had failed just because my car battery died. The roc module is a major safety module, that extends the head protection in a roll over accident. This module shouldn't fail simply because your car battery dies. Research online shows many owners of BMW's experience this module failure just because their battery was disconnected or their battery had fully disharged. I have never owned any other car that a major safety module failed just because the battery discharges. Every other car, I would simply replace the battery and everything still worked. This is a major safety issue when this module fails, as the roll over protection devices will not activate in a roll over acci
Tail lights burn out and require entire housing to be replaced instead of just bulbs. LED's burn out very quickly, contrary to typical LED's and are costly to replace
The wiring of my 2009 BMW headlights, both sides, has its insulation disintegrate, exposing bare copper wire (as it is made of biodegradable material) to the point where my daytime running lights have shorted out and the adaptive headlight control on the passenger headlight is stuck at an angle that is too high. As these are adaptive headlights, a short here can render the… Read more
The wiring of my 2009 BMW headlights, both sides, has its insulation disintegrate, exposing bare copper wire (as it is made of biodegradable material) to the point where my daytime running lights have shorted out and the adaptive headlight control on the passenger headlight is stuck at an angle that is too high. As these are adaptive headlights, a short here can render the car's headlight in a blinding state. Local shops want to charge $900+ per light housing to completely replace the light assembly.
High pressure fuel pump is bad in car. The car goes into limp mode on highway when passing car leaving you no power to get out of the way of car going 75 MPH. BMW knows it bad but will not help!
Wiring inside headlight assembly has insufficiently insulated wiring. The wire insulation is flaking off due to heat exposure from normal operating conditions. This is a safety problem. Fire potential. Lights could stop working while driving at night.
Tl* takata recall. The contact owns a 2009 BMW 135I convertible. The contact received notification of NHTSA campaign number: 16v071000 (air bags); however, the parts to do the repair were unavailable. The contact stated that the manufacturer exceeded a reasonable amount of time for the recall repair. The dealer (sun motor cars, inc. 6677 carlisle pike, mechanicsburg, pa 17050… Read more
Tl* takata recall. The contact owns a 2009 BMW 135I convertible. The contact received notification of NHTSA campaign number: 16v071000 (air bags); however, the parts to do the repair were unavailable. The contact stated that the manufacturer exceeded a reasonable amount of time for the recall repair. The dealer (sun motor cars, inc. 6677 carlisle pike, mechanicsburg, pa 17050 (717) 691-3333) was contacted and confirmed that the parts were unavailable for the recall remedy. The manufacturer was made aware of the issue and confirmed with the contact that his VIN was in priority group 5 and parts would not be available until late september. The contact had not experienced a failure. Parts distribution disconnect.
There is a recall and it is incomplete due to it not being replaced in a timely manner no incident as of now but needs to be replaced.
2009 BMW 135I recalls (4)
BMW of north america, llc (BMW) is recalling certain 2008-2013 128i and 135I convertibles, 128i, 135I, and m coupes, 2007-2010 x3 30si and x3 xdrive30i, 2013-2015 x1 sdrive28i, x1 xdrive28i and x1 xdrive35i, 2007-2013 328i, 328i xdrive, 335i, 335is, 335i xdrive and m3 coupes, 2006-2011 328i, 328xi, 328i xdrive, 325i, 325xi, 330i, 330xi, 335i, 335xi, 335i xdrive and m3, 2009-2011 335d, 2006-2012 325xi, 328i, 328xi and 328i xdrive, 2010-2011 x6 activehybrid, 2007-2013 328i, 335i, 335is, m3 coupes, x5 30si, x5 xdrive30i, x5 xdrive35i, x5 48i, x5 xdrive48i, x5 xdrive50i and x5 m, 2009-2013 x5 xdrive35d and 2008-2014 x6 xdrive35i, x6 xdrive50i and x6m vehicles equipped with non-desiccated driver frontal air bag inflators containing phase stabilized ammonium nitrate (psan) that were used as interim remedy parts for previous takata recalls. These inflators may explode due to propellant degradation occurring after long-term exposure to high absolute humidity, high temperatures, and high temperature cycling.
Risk: An inflator explosion may result in sharp metal fragments striking the driver or other occupants resulting in serious injury or death.
Remedy: Bmw will notify owners, and dealers will replace the driver air bag. On x5 and x6 vehicles, only the inflator will be replaced. All repairs will be performed free of charge. The recall began march 11, 2020. Owners may contact bmw customer service at 1-800-525-7417.
BMW of north america, llc (BMW) is recalling certain 2008-2012 BMW 128i, 135I, 135is coupes and 128i, 135I convertible vehicles. The wiring and electrical connectors in the blower-regulator wiring harness may overheat.
Risk: Wiring that overheats could cause the electrical connectors to melt, and increase the risk of a fire, even when the vehicle is unattended.
Remedy: Bmw will notify owners, and dealers will inspect the blower-regulator wiring harness, and replace it with a new part, free of charge. The recall began october 4, 2019. Owners may contact bmw customer service at 1-800-525-7417. Note: this recall is an expansion of an earlier recall number 17v-676.
BMW of north america, llc (BMW) is recalling certain model year 2008-2013 128i and 135I coupes and convertibles and 1 series m coupes, 2006-2011 325i, 325xi, 328i, 328xi, 328i xdrive, 330i, 330xi, 335i, 335xi, 335i xdrive sedans, 2009-2011 335d sedans, 2006-2012 325xit, 328i and 328xi sports wagons, 2007-2013 328i, 328xi, 328i xdrive, 335i, 335xi, 335i xdrive, 335is and m3 coupes and convertibles, 2013-2015 x1 sdrive28i, x1 xdrive28i and x1 xdrive35i savs, 2007-2010 x3 xdrive30i savs, 2007-2013 x5 xdrive30i, x5 xdrive35i, x5 xdrive48i, x5 xdrive50i and x5 m savs, 2009-2013 BMW x5 xdrive35d savs, 2008-2014 x6 xdrive35i, x6 xdrive50i, and x6 m sacs, 2010-2011 BMW x6 xdrive50i sacs and 2008-2011 m3 sedan vehicles. Upon deployment of the driver's frontal air bag, excessive internal pressure may cause the inflator to rupture.
Risk: In the event of a crash necessitating deployment of the driver's frontal air bag, the inflator could rupture with metal fragments striking the driver or other occupants resulting in serious injury or death.
Remedy: Bmw will notify owners, and dealers will replace the driver's frontal air bag module or inflator depending on the vehicle model, free of charge. The recall began march 9, 2018. Owners may contact bmw customer service at 1-800-525-7417.
BMW is recalling certain model year 2008-2012 1-series coupes and convertibles manufactured december 2007 through september 2011; and 2007-2011 3-series coupes and convertibles manufactured march 2007 through october 2011; 2007-2011 3-series sedans manufactured march 2007 through october 2011; 2007-2011 3-series sports wagons manufactured march 2007 through june 2011; and 2009-2011 z4 vehicles manufactured march 2009 through june 2011. In february 2013, BMW recalled 504,545 vehicles. In july 2013, BMW informed the agency that it was adding 1-series, 3-series, and z4 vehicles, representing an additional 12,094 vehicles. The total number of vehicles being recalled is now 516,791. The connector for the positive battery cable connector and the corresponding terminal on the fuse box may degrade over time. Over time, the high current flow and heat from electrical resistance may lead to a breakage of the connection, and a loss of electrical power to the vehicle.
Risk: If there is a loss of electrical power to the vehicle, the vehicle may unexpectedly stall, increasing the risk of a crash.
Remedy: Bmw will notify owners, and dealers will replace the positive battery cable connector and secure it with an improved method, free of charge. The recall began on march 13, 2013. Owners may call bmw at 1-800-525-7417 or email bmw at [email protected].
Fuel economy (EPA)
| Engine | Transmission | Drive | City | Hwy | Comb. |
|---|---|---|---|---|---|
| 3.0L 6-cyl | Manual 6-spd | Rear-Wheel Drive | 17 | 25 | 20 |
| 3.0L 6-cyl | Automatic (S6) | Rear-Wheel Drive | 18 | 25 | 20 |
Other BMW 135I years
Frequently asked questions
Is the 2009 BMW 135I a reliable car?
Our score for the 2009 BMW 135I is 6.1/10 (average). It is based on 29 owner complaints and 4 recalls compared with other 2009 vehicles and other BMW 135I years.
What are the most common problems with the 2009 BMW 135I?
Owners most often report problems with fuel & propulsion system (16 complaints), engine & cooling (5 complaints), electrical system (4 complaints).
How many recalls does the 2009 BMW 135I have?
4 recalls are on file with NHTSA, including: 20V017000 (air bags:frontal:driver side:inflator module); 19V579000 (electrical system:wiring); 16V071000 (air bags:frontal:driver side:inflator module).
What gas mileage does the 2009 BMW 135I get?
The EPA rates the 2009 BMW 135I at about 17 MPG city, 26 MPG highway and 20 MPG combined, depending on engine and drivetrain.
Source: NHTSA complaints & recalls, EPA fueleconomy.gov. Data updated November 18, 2026. Complaints are unverified reports by owners.