CarProblemsDB

2012 BMW 128I problems, recalls & MPG

NHTSA has received 31 complaints from owners of the 2012 BMW 128I, most often about the airbags. There are 5 safety recalls for this model year. The EPA rates it at about 22 MPG combined.

5.7out of 10
Our verdict
Average
  • More complaints than 52% of 2012 vehicles
  • Most reported problem: airbags (74% of complaints)
  • 5 safety recalls
  • 2 crashes, 1 injury reported
How we score
Complaints31
Recalls5
MPG combined22
Safety—

Most reported 2012 BMW 128I problems

Owner complaints filed with NHTSA, grouped by problem area. One complaint can mention several areas.

Airbags23 (74%)
Engine & cooling6 (19%)
Fuel & propulsion system2 (6%)
Brakes1 (3%)
Electrical system1 (3%)
Other / unknown1 (3%)
Seat belts1 (3%)
Speed control (cruise, throttle)1 (3%)

When owners reported problems

12013
72016
142017
22018
22022
12024
42026

Complaints by the year they were filed.

Recent owner complaints

Aug 24, 2026seat belts
My mother was in the passenger seat and the seat belt buckle would not allow the tongue to be inserted. After several attempts we got it in but when we got home I tried to engage the seat belt several times, I tried to lubricate the buckle no luck... I ordered a new buckle. The BMW dealer said there had been no other complaints and it was not under recall. As soon as I get the… Read more

My mother was in the passenger seat and the seat belt buckle would not allow the tongue to be inserted. After several attempts we got it in but when we got home I tried to engage the seat belt several times, I tried to lubricate the buckle no luck... I ordered a new buckle. The BMW dealer said there had been no other complaints and it was not under recall. As soon as I get the new part I will retain the buckle if needed.

NHTSA complaint #11759010
May 19, 2026unknown or other, engine, fuel/propulsion system
Prior to august 2024, this vehicle operated with zero check engine lights or drivetrain faults. In august 2024, BMW of pittsburgh executed federally mandated safety recall 23v-707, which required opening the cylinder head. Immediately following this service, the check engine light began illuminating persistently.on or about october 3, 2024, an independent diagnostic scan at… Read more

Prior to august 2024, this vehicle operated with zero check engine lights or drivetrain faults. In august 2024, BMW of pittsburgh executed federally mandated safety recall 23v-707, which required opening the cylinder head. Immediately following this service, the check engine light began illuminating persistently.on or about october 3, 2024, an independent diagnostic scan at bobby rahal BMW pulled BMW factory code 002a89: exhaust vanos camshaft mechanism fault (mechanical sticking/flow restriction). Technicians at bobby rahal BMW explicitly instructed me to return the car to BMW of pittsburgh because they suspected the original vanos safety recall repair was botched.on october 28, 2024, I returned the vehicle to BMW of pittsburgh to address this issue. Their technicians opened the engine block assembly a second time, yet failed to correct the defect. Following this second visit, the check engine light continued to come on intermittently. The vehicle began suffering rough idling, difficulty starting, and dangerous stalling events during operation. Cycling the ignition on and off provided only temporary relief.the check engine light has now become permanently illuminated. The safety hazards have severely escalated into a protective engine "limp mode," causing violent drivetrain shuddering and a catastrophic loss of driveability. BMW of pittsburgh refuses to honor the recall workmanship, demanding a predatory $6,000 out-of-pocket teardown fee to bypass their liability. The manufa

NHTSA complaint #11738803
Mar 24, 2026engine

Due to BMW using plastic parts when you live in hot and cold environments the plastic begins to mold to other plastic parts and pvc diaphragms tear rather easy causing rough idle , stalls and can cause over revving and send a car into another car while in gear. The cheap plastic cause oil leaks and when oil gets low cause engine failure as well.

NHTSA complaint #11726596
Mar 6, 2026engine, fuel/propulsion system
On february 25, 2026, BMW of south miami performed the vanos safety recall repair on my vehicle. The repair order documented that vanos bolts were missing and retrieved from the engine oil pan and that vanos components were serviced. Within approximately 24–48 hours of picking up the vehicle, the check engine light illuminated and the vehicle began operating abnormally,… Read more

On february 25, 2026, BMW of south miami performed the vanos safety recall repair on my vehicle. The repair order documented that vanos bolts were missing and retrieved from the engine oil pan and that vanos components were serviced. Within approximately 24–48 hours of picking up the vehicle, the check engine light illuminated and the vehicle began operating abnormally, including rough idle and irregular shifting. The vehicle stored diagnostic fault code p054b (camshaft position timing over-retarded), which directly relates to camshaft timing and the vanos system involved in the recall repair. I returned the vehicle to the dealership for further diagnosis. The dealership stated an aftermarket camshaft position sensor with two o-rings was installed and removed one o-ring to correct the gap between the sensor and the camshaft reluctor wheel. The faults were cleared and the vehicle was returned to me. However, the check engine light returned again the following morning upon cold start, indicating the issue was not corrected. My service advisor has since stated that replacing the camshaft position sensor is not part of the recall repair and the dealership has declined to repair the vehicle under the recall. Because the malfunction appeared immediately after the vanos safety recall repair and involves the camshaft timing system connected to vanos operation, I believe the recall repair may not have been properly completed or corrected. I am requesting that NHTSA review this ma

NHTSA complaint #11722577
Jul 9, 2024engine and engine cooling
The contact owns a 2012 BMW 128I. The contact received notification of NHTSA campaign number: 23v707000 (engine and engine cooling); however, the part to do the recall repair was not yet available. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The dealer was made aware of the issue and confirmed that parts were not yet… Read more

The contact owns a 2012 BMW 128I. The contact received notification of NHTSA campaign number: 23v707000 (engine and engine cooling); however, the part to do the recall repair was not yet available. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The dealer was made aware of the issue and confirmed that parts were not yet available. The manufacturer was made aware of the issue and confirmed that parts were not yet available. The contact had not experienced a failure. VIN tool confirms parts not available.

NHTSA complaint #11600565
Jun 16, 2022engine
The contact owns a 2012 BMW 128I. The contact stated after completing an oil change at the dealer and starting the vehicle, the rpm started fluctuating. The contact stated that after coming to a complete stop at a traffic light, the rpm fluctuated rapidly and the vehicle decelerated while driving. The dealer was notified of the failure and advised the contact to take the… Read more

The contact owns a 2012 BMW 128I. The contact stated after completing an oil change at the dealer and starting the vehicle, the rpm started fluctuating. The contact stated that after coming to a complete stop at a traffic light, the rpm fluctuated rapidly and the vehicle decelerated while driving. The dealer was notified of the failure and advised the contact to take the vehicle back to the dealer for a diagnostic test. The contact was able to drive to the dealer at a slower speed. The dealer diagnosed that the vanos (variable nockenwell steuerung) system needed to be replaced. The dealer informed the contact that the failure was a manufacturing defect; however, she would be responsible for the cost of the repair. The manufacturer was notified of the failure and informed the contact that they could not assist since an unknown recall was converted to an extended warranty repair which had expired. The vehicle was not repaired. The failure mileage was 79,769.

NHTSA complaint #11469556
Jun 2, 2022engine and engine cooling
The contact owns a 2012 BMW 128I. The contact received notification of NHTSA campaign number: 22v119000 (engine and engine cooling) however, the part to do the recall repair was not yet available. The local dealer was contacted. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was made aware of the issue.… Read more

The contact owns a 2012 BMW 128I. The contact received notification of NHTSA campaign number: 22v119000 (engine and engine cooling) however, the part to do the recall repair was not yet available. The local dealer was contacted. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was made aware of the issue. The contact had not experienced a failure. VIN tool confirms parts not available.

NHTSA complaint #11467123
May 2, 2018air bags

Takata recall

NHTSA complaint #11091442

2012 BMW 128I recalls (5)

Recall 22V1190002022Engine and engine cooling:exhaust system:emission control:crankcase (pcv)

BMW of north america, llc (BMW) is recalling certain 2008-2013 1 series coupe (128I); 2007-2013 3 series coupe (328i, 328xi, 328i xdrive); 2007-2010 x3 sav (x3 3.0si, x3 xdrive30i); 2008-2013 1 series convertible (128I); 2006-2011 3 series sedan (325i, 325xi, 328i, 328xi, 328i xdrive, 330i, 330xi); 2006-2012 3 series wagon (328i, 328i xdrive); 2007-2013 3 series convertible (328i); 2006-2010 5 series sedan (525i, 525xi, 528i, 528xi, 530i, 530xi); 2006-2007 5 series wagon (530xi); 2007-2010 x5 sav (x5 3.0si, x5 xdrive30i); 2006-2008 z4 coupe (z4 3.0si); and 2006-2011 z4 roadster (z4 3.0i, z4 3.0si, z4 sdrive30i) vehicles. The heater for the positive crankcase ventilation (pcv) valve may short circuit.

Risk: An electrical short can cause the pcv valve heater to overheat, increasing the risk of a fire while driving or, soon after driving when parked.

Remedy: This recall supersedes and expands previous NHTSA recalls 17v-683 and 19v-273. Dealers will install an electrical wiring harness with fuse protection for the pcv valve heater in potentially affected vehicles, free of charge. This recall supersedes and expands previous NHTSA recalls 17v-683 and 19v-273. Vehicles previously repaired under the prior recalls will need to come back for the new recall remedy. The remedy is currently being developed. Interim owner notification letters informing owners of the safety risk were mailed on april 1, 2022. Owner notification letters were mailed on july 22, 2022. Owners may contact bmw customer service at 1-800-525-7417.

Recall 20V0170002020Air bags:frontal:driver side:inflator module

BMW of north america, llc (BMW) is recalling certain 2008-2013 128I and 135i convertibles, 128I, 135i, and m coupes, 2007-2010 x3 30si and x3 xdrive30i, 2013-2015 x1 sdrive28i, x1 xdrive28i and x1 xdrive35i, 2007-2013 328i, 328i xdrive, 335i, 335is, 335i xdrive and m3 coupes, 2006-2011 328i, 328xi, 328i xdrive, 325i, 325xi, 330i, 330xi, 335i, 335xi, 335i xdrive and m3, 2009-2011 335d, 2006-2012 325xi, 328i, 328xi and 328i xdrive, 2010-2011 x6 activehybrid, 2007-2013 328i, 335i, 335is, m3 coupes, x5 30si, x5 xdrive30i, x5 xdrive35i, x5 48i, x5 xdrive48i, x5 xdrive50i and x5 m, 2009-2013 x5 xdrive35d and 2008-2014 x6 xdrive35i, x6 xdrive50i and x6m vehicles equipped with non-desiccated driver frontal air bag inflators containing phase stabilized ammonium nitrate (psan) that were used as interim remedy parts for previous takata recalls. These inflators may explode due to propellant degradation occurring after long-term exposure to high absolute humidity, high temperatures, and high temperature cycling.

Risk: An inflator explosion may result in sharp metal fragments striking the driver or other occupants resulting in serious injury or death.

Remedy: Bmw will notify owners, and dealers will replace the driver air bag. On x5 and x6 vehicles, only the inflator will be replaced. All repairs will be performed free of charge. The recall began march 11, 2020. Owners may contact bmw customer service at 1-800-525-7417.

Recall 19V5790002019Electrical system:wiring

BMW of north america, llc (BMW) is recalling certain 2008-2012 BMW 128I, 135i, 135is coupes and 128I, 135i convertible vehicles. The wiring and electrical connectors in the blower-regulator wiring harness may overheat.

Risk: Wiring that overheats could cause the electrical connectors to melt, and increase the risk of a fire, even when the vehicle is unattended.

Remedy: Bmw will notify owners, and dealers will inspect the blower-regulator wiring harness, and replace it with a new part, free of charge. The recall began october 4, 2019. Owners may contact bmw customer service at 1-800-525-7417. Note: this recall is an expansion of an earlier recall number 17v-676.

Recall 16V0710002016Air bags:frontal:driver side:inflator module

BMW of north america, llc (BMW) is recalling certain model year 2008-2013 128I and 135i coupes and convertibles and 1 series m coupes, 2006-2011 325i, 325xi, 328i, 328xi, 328i xdrive, 330i, 330xi, 335i, 335xi, 335i xdrive sedans, 2009-2011 335d sedans, 2006-2012 325xit, 328i and 328xi sports wagons, 2007-2013 328i, 328xi, 328i xdrive, 335i, 335xi, 335i xdrive, 335is and m3 coupes and convertibles, 2013-2015 x1 sdrive28i, x1 xdrive28i and x1 xdrive35i savs, 2007-2010 x3 xdrive30i savs, 2007-2013 x5 xdrive30i, x5 xdrive35i, x5 xdrive48i, x5 xdrive50i and x5 m savs, 2009-2013 BMW x5 xdrive35d savs, 2008-2014 x6 xdrive35i, x6 xdrive50i, and x6 m sacs, 2010-2011 BMW x6 xdrive50i sacs and 2008-2011 m3 sedan vehicles. Upon deployment of the driver's frontal air bag, excessive internal pressure may cause the inflator to rupture.

Risk: In the event of a crash necessitating deployment of the driver's frontal air bag, the inflator could rupture with metal fragments striking the driver or other occupants resulting in serious injury or death.

Remedy: Bmw will notify owners, and dealers will replace the driver's frontal air bag module or inflator depending on the vehicle model, free of charge. The recall began march 9, 2018. Owners may contact bmw customer service at 1-800-525-7417.

Recall 13V0440002013Electrical system

BMW is recalling certain model year 2008-2012 1-series coupes and convertibles manufactured december 2007 through september 2011; and 2007-2011 3-series coupes and convertibles manufactured march 2007 through october 2011; 2007-2011 3-series sedans manufactured march 2007 through october 2011; 2007-2011 3-series sports wagons manufactured march 2007 through june 2011; and 2009-2011 z4 vehicles manufactured march 2009 through june 2011. In february 2013, BMW recalled 504,545 vehicles. In july 2013, BMW informed the agency that it was adding 1-series, 3-series, and z4 vehicles, representing an additional 12,094 vehicles. The total number of vehicles being recalled is now 516,791. The connector for the positive battery cable connector and the corresponding terminal on the fuse box may degrade over time. Over time, the high current flow and heat from electrical resistance may lead to a breakage of the connection, and a loss of electrical power to the vehicle.

Risk: If there is a loss of electrical power to the vehicle, the vehicle may unexpectedly stall, increasing the risk of a crash.

Remedy: Bmw will notify owners, and dealers will replace the positive battery cable connector and secure it with an improved method, free of charge. The recall began on march 13, 2013. Owners may call bmw at 1-800-525-7417 or email bmw at [email protected].

Fuel economy (EPA)

EngineTransmissionDriveCityHwyComb.
3.0L 6-cylManual 6-spdRear-Wheel Drive182722
3.0L 6-cylAutomatic (S6)Rear-Wheel Drive182821

Crash-test ratings (NHTSA)

VersionOverallFrontalSideRollover
2012 BMW 128 I C RWD————
2012 BMW 128 I 2 DR RWD————

Other BMW 128I years

Frequently asked questions

Is the 2012 BMW 128I a reliable car?

Our score for the 2012 BMW 128I is 5.7/10 (average). It is based on 31 owner complaints and 5 recalls compared with other 2012 vehicles and other BMW 128I years.

What are the most common problems with the 2012 BMW 128I?

Owners most often report problems with airbags (23 complaints), engine & cooling (6 complaints), fuel & propulsion system (2 complaints).

How many recalls does the 2012 BMW 128I have?

5 recalls are on file with NHTSA, including: 22V119000 (engine and engine cooling:exhaust system:emission control:crankcase (pcv)); 20V017000 (air bags:frontal:driver side:inflator module); 19V579000 (electrical system:wiring).

What gas mileage does the 2012 BMW 128I get?

The EPA rates the 2012 BMW 128I at about 18 MPG city, 28 MPG highway and 22 MPG combined, depending on engine and drivetrain.

Source: NHTSA complaints & recalls, EPA fueleconomy.gov. Data updated November 18, 2026. Complaints are unverified reports by owners.