CarProblemsDB

2016 Toyota Tundra brakes problems

34 owners reported brakes problems — 28% of all 120 complaints about the 2016 Toyota Tundra.

Brakes complaints by Toyota Tundra year

20257
202427
202332
202232
20204
20199
201822
201714
201634
201510
20147
20134
20127
201110
201019
20091
200829
200733
200634
200543
200437
200341
2002120
2001118
2000282

What owners report

Feb 20, 2025service brakes

The trailer brake controller went out. It does not supply electronic braking and the truck no longer recognizes the controller on the dashboard. Multiple on line chats and forums, along with my trailer provider, show awareness of this defect. Online individuals learned of the issue during emergency stopping. This appears to be known and wide spread.

NHTSA complaint #11643867
Jun 5, 2024steering, electrical system, service brakes
1)over 60 MPH with new tires the vehicle pulses & shakes on front end, checked alignment everything ok per mechanic. Just started to occur 2)bluetooth when on iphone will at any time cut out guaranteed to occur when using at any time been occurring for 2 + years. 3)trailer brake warning light (idiot light) comes on dashboard does not recommend trailering due to electrical… Read more

1)over 60 MPH with new tires the vehicle pulses & shakes on front end, checked alignment everything ok per mechanic. Just started to occur 2)bluetooth when on iphone will at any time cut out guaranteed to occur when using at any time been occurring for 2 + years. 3)trailer brake warning light (idiot light) comes on dashboard does not recommend trailering due to electrical issue. Occurring for 2+ years bought vehicle used in 2017 with 13k on truck now 2024 has 91k on truck love the truck but zero recalls for any of the above?

NHTSA complaint #11592560
Jul 3, 2023service brakes

The integrated brake controller does not apply enough power to the trailer brakes.

NHTSA complaint #11530257
Feb 27, 2022service brakes

Bought a used 2016 Tundra, unaware of the massive problem they have with their intergrated brake controller, I feel they need to do something about this or reimburse the buyer for buying a aftermarket one to replace the factory unit. Its a very unsafe problem when pulling a trailer, I love the truck otherwise but this issue needs fixed.

NHTSA complaint #11454363
Feb 11, 2020service brakes

Brake controller doesn't work as it designed.

NHTSA complaint #11308396
Jul 9, 2019unknown or other, service brakes

Integrated trailer brake controller intermitent failure. Trailer brakes work for a few braking cycles then fail completely with an error message on the truck of "trailer wiring type, or connection fault". Turning the vehicle off and on resets the controller and "fixes" the problem until another few braking cycles, then repeats.

NHTSA complaint #11230497
Oct 29, 2018service brakes

Real sample the brake controller doesn't work no matter if you set it up to 9.5 or 10 doesn't do any brake applied.

NHTSA complaint #11143913
Jan 25, 2018service brakes
The factory supplied oem brake controller does not function properly, and is a significant safety issue. The current design or software is too conservative, and does not provide sufficient power to trailers with electric brakes. I have towed my new trailer with new brakes several times, and the result is consistent. With the brake controller set at full power, the actual… Read more

The factory supplied oem brake controller does not function properly, and is a significant safety issue. The current design or software is too conservative, and does not provide sufficient power to trailers with electric brakes. I have towed my new trailer with new brakes several times, and the result is consistent. With the brake controller set at full power, the actual trailer braking is minimal, therefore forcing the vehicle to provide some of the braking force. This works in controlled situations on level ground. But, in the mountains or emergency stopping, this represents a safety issue where I do not feel that the vehicle and trailer will be safely stopped without incident. A friend of mine has the exact same vehicle with the exact same issue. A simple internet search will reveal hundreds of similar complaints. This issue started with the 2015 model year. I'm concerned that Toyota is continuing to ignore this issue due to legal liability regarding accidents that already occurred due to this engineering flaw. It is going on 3 years now without a fix. Toyota did issue a software upgrade last year which should have fixed this issue. I had the upgrade done, and it was almost imperceptible as to the difference. It was too conservative and still does not provide enough power, as compared to any brake controller on the market. Most owners have given up and installed aftermarket brake controllers like the tekonsha prodigy p3 model. I believe that the programming should be f

NHTSA complaint #11064931
Jan 11, 2018electrical system, service brakesCrash
I purchased a new trailer to pick up my new tractor. I tested the trailer brakes knowing I was pulling a large load and didn't want an accident. The brakes appeared to apply but due to it not being loaded when testing I had it set to 5(out of 10). While pulling it back home on the interstate towing my tractor behind me there was traffic stopping ahead. I always drive in the… Read more

I purchased a new trailer to pick up my new tractor. I tested the trailer brakes knowing I was pulling a large load and didn't want an accident. The brakes appeared to apply but due to it not being loaded when testing I had it set to 5(out of 10). While pulling it back home on the interstate towing my tractor behind me there was traffic stopping ahead. I always drive in the right lane to not slow others...thank god I did. I had to drive off the road onto the shoulder to miss hitting or driving over cars ahead of me! The brakes turned up to 10 did nothing to even slow me down. I was towing 4 tons and 3 tons for the truck totaling 7 tons, someone would've been killed! Toyota needs to fix these trailer brakes! I can't tow my tractor anywhere for work due to the brakes being unsafe!

NHTSA complaint #11062085
Sep 13, 2017service brakes

Front rotors warped in under 15,000 miles VIN#[xxx] information redacted pursuant to the freedom of information act (foia), 5 u.s.c. 552(b)(6). *tr

NHTSA complaint #11022985
May 12, 2017unknown or other, service brakes
Have had braking issues with integrated brake controller, no matter what power level I use there seems to be very little if no effect on the trailer braking. I can switch the integrated brake controller to electric over hydraulic and they apply the brakes and they grab immediately, it seems that the integrated brake controller in electric brake mode does not produce enough… Read more

Have had braking issues with integrated brake controller, no matter what power level I use there seems to be very little if no effect on the trailer braking. I can switch the integrated brake controller to electric over hydraulic and they apply the brakes and they grab immediately, it seems that the integrated brake controller in electric brake mode does not produce enough electrical power to activate the trailer brakes.

NHTSA complaint #10985431
Apr 17, 2017unknown or other, service brakes

Cpsc:I purchased a 2016 Toyota Tundra pickup truck. The truck comes with an integrated brake controller for towing trailers, boats, etc. The ibc has two modes of braking, for trailers with electric brakes or for trailers with hydraulic brakes. *bf the consumer stated the automatic braking did not work for the electrics brakes mode. Updated 04/21/2017 *js

NHTSA complaint #10979512
Apr 5, 2017unknown or other, service brakes

Integrated brake controller does not operate trailer brakes, at any time. Moving or standing still.

NHTSA complaint #10970626
Mar 27, 2017service brakes

The ibc fails to work on a aluma tandem trail.

NHTSA complaint #10968621
Mar 3, 2017service brakes
Tl* the contact owns a 2016 Toyota Tundra. The contact stated that the brake controller on the vehicle failed to activate the brake on the trailer. The contact stated that an error message illuminated, referring the driver to the owner's manual. The vehicle was taken to a dealer who was unable to diagnose the failure. The manufacturer was made aware of the failure and sent two… Read more

Tl* the contact owns a 2016 Toyota Tundra. The contact stated that the brake controller on the vehicle failed to activate the brake on the trailer. The contact stated that an error message illuminated, referring the driver to the owner's manual. The vehicle was taken to a dealer who was unable to diagnose the failure. The manufacturer was made aware of the failure and sent two engineers to investigate the failure. The engineers diagnosed that the part was working as designed. The failure was not remedied. The failure mileage was approximately 5,000.

NHTSA complaint #10958535
Feb 28, 2017service brakes

The integrated break controller does not function correctly. Dealer stated it is a known problem and Toyota does not have a repair for the factory defect.

NHTSA complaint #10957662
Oct 18, 2016service brakes
Integrated trailer brake controller not functioning correctly. In electric mode, no power setting (1-10) is able to get the trailer brakes to lock up when the truck brakes are applied. This is a crucial test to calibrate the trailer brakes before going on the road, and demonstrates that the output signal from the brake controller isn't sufficient to stop the truck/trailer… Read more

Integrated trailer brake controller not functioning correctly. In electric mode, no power setting (1-10) is able to get the trailer brakes to lock up when the truck brakes are applied. This is a crucial test to calibrate the trailer brakes before going on the road, and demonstrates that the output signal from the brake controller isn't sufficient to stop the truck/trailer combo in an emergency situation. The trailer brakes are able to lock up with certain settings if you manually activate the trigger, demonstrating that the controller not only has the ability to lock up the brakes, but that the trailer itself isnt the problem. The programming of the controller is suspect.

NHTSA complaint #10916820
Oct 17, 2016electrical system, unknown or other, service brakes

The integrated elecric brake controller included in my platinum edition options for towing a trailer does not work. According to dealer, there is no fix from Toyota although they are aware of the issue.

NHTSA complaint #10916440
Oct 3, 2016service brakes
Integrated brake controller (ibc) on a 2016 Toyota Tundra fails to adequately stop a trailer fitted with electronic drum brakes. When the brake controller is in the electric brake mode, I get very little braking with the ibc maxed at level 10 on the gain control. I can manually stop the trailer using the manual squeeze levers and the brakes stop the trailer and truck, but… Read more

Integrated brake controller (ibc) on a 2016 Toyota Tundra fails to adequately stop a trailer fitted with electronic drum brakes. When the brake controller is in the electric brake mode, I get very little braking with the ibc maxed at level 10 on the gain control. I can manually stop the trailer using the manual squeeze levers and the brakes stop the trailer and truck, but provides very little braking when using the brake pedal. The trailer pushes the truck creating a very dangerous situation. If I put the brake controller in the electric over hydraulic brake mode, the brakes work by the brake pedal but grab instantly at only a gain level of (1.5). The trailer brakes have been tested and work as expected with an aftermarket brake controller. Toyota's ibc, as noted by several other owners, on many websites are not performing as expected when towing a trailer. If road surfaces are wet or icy the truck breaks would have little chance to stop a loaded trailer at max capacity.

NHTSA complaint #10911244
Sep 21, 2016electrical system, service brakes
Tl* the contact owns a 2016 Toyota Tundra. While towing a trailer, the brake pedal was depressed; however, the trailer brake lights failed to illuminate. The vehicle was taken to an independent mechanic where it was diagnosed that the integrated brake controller failed and needed to be replaced. The vehicle was not repaired. The manufacturer was notified of the failure. The… Read more

Tl* the contact owns a 2016 Toyota Tundra. While towing a trailer, the brake pedal was depressed; however, the trailer brake lights failed to illuminate. The vehicle was taken to an independent mechanic where it was diagnosed that the integrated brake controller failed and needed to be replaced. The vehicle was not repaired. The manufacturer was notified of the failure. The failure mileage was approximately 500. The VIN was not available.

NHTSA complaint #10908430
Aug 26, 2016service brakes
I recently purchased a 2016 Tundra to pull my small travel trailer. On a recent trip I had to stop quickly and realized that the trailer brakes were not activating. I then did some tests to see what it would take to get it to activate and was surprised to discover that it was not braking the trailer at all. I brought it to my local Toyota dealer and they told me that there was… Read more

I recently purchased a 2016 Tundra to pull my small travel trailer. On a recent trip I had to stop quickly and realized that the trailer brakes were not activating. I then did some tests to see what it would take to get it to activate and was surprised to discover that it was not braking the trailer at all. I brought it to my local Toyota dealer and they told me that there was a ton of complaints about this issue but they have no fix for it.

NHTSA complaint #10898677
Aug 16, 2016service brakes

The brake controller (ibc) needs to function properly

NHTSA complaint #10896242
Jul 20, 2016service brakes
I recently bought a travel trailer and, after reading the manual, was setting up the integrated brake controller (heretofore referred to as the ibs). I was following the user manual supplied with my truck when I purchased it new step-by-step. I eventually had the gain set to "10" and was still not getting proper braking pressure from the trailer. I got out, checked all… Read more

I recently bought a travel trailer and, after reading the manual, was setting up the integrated brake controller (heretofore referred to as the ibs). I was following the user manual supplied with my truck when I purchased it new step-by-step. I eventually had the gain set to "10" and was still not getting proper braking pressure from the trailer. I got out, checked all connections, restarted the truck and tried again; same issue. I connected a friends tekonsha p3 through my trucks ibc cable (using his cable adapter) and tried again without a problem. This confirms it's not a trailer or wiring issue. I reconnect the ibc and restarted the truck, trying again; same issue. I took it to the dealer and they shrugged their shoulders, said they saw before with no resolve, and suggested I buy an aftermarket brake controller, too. I then looked online and found several hundred others experiencing the same problem, requiring that they buy an aftermarket brake controller to compensate for this one (two links are at the bottom of this complaint). The dealers and Toyota are unable/unwilling to do anything. This needs to be addressed. Https://www.tundras.com/threads/factory-brake-controller-issues.5103/ http://www.tundratalk.net/forums/Tundra-problems-maintenance-repair-dealer-warranty-issues/562250-2016-brake-controller-problems-9.html

NHTSA complaint #10886172
Jul 11, 2016service brakes

Built in break controller is not working properly. With full gain, it does not apply the correct amount of brakes to my trailer. This is very dangerous and could lead to an accident.

NHTSA complaint #10884142
Jul 6, 2016service brakes
Truck is rated to tow 9100lbs, and includes an integrated trailer brake controller for use with electric trailer brakes (which is new for 2016 Tundra's). The first time I hooked the truck up to the trailer, I set up the trailer brakes using the owners manual. After pulling out onto the street I immediately noticed that when I pressed the brakes the trailer brakes failed to… Read more

Truck is rated to tow 9100lbs, and includes an integrated trailer brake controller for use with electric trailer brakes (which is new for 2016 Tundra's). The first time I hooked the truck up to the trailer, I set up the trailer brakes using the owners manual. After pulling out onto the street I immediately noticed that when I pressed the brakes the trailer brakes failed to engage. My trailer weighs nearly 8000lbs. Luckily, the manual slider works to engage the trailer brakes, but even on a gain setting of 10 (max) the foot brake fails to adequately engage the brakes on my trailer. I have tried 2 other trailers, and talked to multiple 2016 Tundra owners online and this problem is consistent across all Tundra's towing any type trailer. Under hard brakng at any speed my trailer wants to jacknife and push the truck out of it's way, because the brakes on the truck are engaging to max and the trailer brakes are hardly engaging at all even on max gain setting. This is a serious issue that needs to be resolved and Toyota is not coming forward with a fix. They claim the controller is "working as designed", but I tow 8000lbs behind me and without adequate trailer brakes a serious accident is just waiting to happen. Someone needs to step in and force Toyota to address this serious issue before someone is hurt or killed. Luckily the manual slider still works, but that is a bandaid solution every Tundra owner can't be expected to drive around manually applying the trailer brakes

NHTSA complaint #10883110
Jun 7, 2016electrical system, service brakes
The integrated brake controller is not work when applying the brakes in electric brake mode. Took my Tundra out for a test drive with my 24' 3200 lb travel trailer. I set the gain to 10 and hit the manual slide and the trailer tires locked up. Stepped on the brakes and couldn't feel any brakes being applied to the trailer. I would have expected the trailer tires to lockup… Read more

The integrated brake controller is not work when applying the brakes in electric brake mode. Took my Tundra out for a test drive with my 24' 3200 lb travel trailer. I set the gain to 10 and hit the manual slide and the trailer tires locked up. Stepped on the brakes and couldn't feel any brakes being applied to the trailer. I would have expected the trailer tires to lockup when I hit the brakes with a gain of 10. This could make a very dangerous situation.

NHTSA complaint #10872967
Jun 6, 2016service brakes
The integrated brake trailer controller to control the brakes on a trailer is not working. The brake controller fails to control the brakes on the trailer while in "electric" mode for electric brakes. It is very dangerous to rely on a brake controller to slow or stop a vehicle that is towing a load with trailer brakes that are not working. I towed our camper this last… Read more

The integrated brake trailer controller to control the brakes on a trailer is not working. The brake controller fails to control the brakes on the trailer while in "electric" mode for electric brakes. It is very dangerous to rely on a brake controller to slow or stop a vehicle that is towing a load with trailer brakes that are not working. I towed our camper this last weekend with my entire family in the car and it was very dangerous to my family and others on the road.

NHTSA complaint #10872726
Jun 6, 2016service brakes
Integrated trailer brake controller not functioning correctly. In electric mode, no power setting (1-10) is able to get the trailer brakes to lock up when the truck brakes are applied. This is a crucial test to calibrate the trailer brakes before going on the road, and demonstrates that the output signal from the brake controller isn't sufficient to stop the truck/trailer… Read more

Integrated trailer brake controller not functioning correctly. In electric mode, no power setting (1-10) is able to get the trailer brakes to lock up when the truck brakes are applied. This is a crucial test to calibrate the trailer brakes before going on the road, and demonstrates that the output signal from the brake controller isn't sufficient to stop the truck/trailer combo in an emergency situation. The trailer brakes are able to lock up with certain settings if you manually activate the trigger, demonstrating that the controller not only has the ability to lock up the brakes, but that the trailer itself isnt the problem. The programming of the controller is suspect.

NHTSA complaint #10872705
Jun 5, 2016service brakes

The control braking does not working properly when towing. I have gained set to highest level which is 10 and on a empty 6x10 toy trailer it will not lock up. When just pressing with brake does not work at all only has littles tension when pressing the brake slider manually. This is very dangerous

NHTSA complaint #10872612
Jun 5, 2016service brakes
The built in trailer brake controller does not work properly when used with any trailer equipped with electric brakes. It is not capable of controlling loaded trailers safely. I have brought this matter to the attention of Toyota and the master technician at my local dealership says he understands the problem and can reproduce the safety issue under testing - but at this time… Read more

The built in trailer brake controller does not work properly when used with any trailer equipped with electric brakes. It is not capable of controlling loaded trailers safely. I have brought this matter to the attention of Toyota and the master technician at my local dealership says he understands the problem and can reproduce the safety issue under testing - but at this time the manufacturer has no recommended solution in place to fix this issue. Please help as it is dangerous. Defect was also evident on a second similar brand new vehicle taken from dealer lot for testing at my last visit to dealer.

NHTSA complaint #10872562
Jun 3, 2016service brakes
The integrated brake controller does not work. Dealer had no fix. When set for electric brakes, the manual slider does apply brakes to the trailer but when applying foot pedal braking, there is no brakes being applied to the trailer. While researching this online on tundratalk.net, it appears all of the new 2016 brake controllers do not work. This is a very dangerous situation… Read more

The integrated brake controller does not work. Dealer had no fix. When set for electric brakes, the manual slider does apply brakes to the trailer but when applying foot pedal braking, there is no brakes being applied to the trailer. While researching this online on tundratalk.net, it appears all of the new 2016 brake controllers do not work. This is a very dangerous situation for someone that does not realize the trailer brakes do not work.

NHTSA complaint #10872369
May 24, 2016service brakes
I'm making this report due to the lame integrated brake controller (ibc) in my 2016 Toyota Tundra. I've been towing a camper for the past 13 years and I know how to set up a brake controller (bc) and more importantly I know when they are working or not. With the ibc, when I press on the brake pedal I get no felt braking from the camper even when set to the highest gain… Read more

I'm making this report due to the lame integrated brake controller (ibc) in my 2016 Toyota Tundra. I've been towing a camper for the past 13 years and I know how to set up a brake controller (bc) and more importantly I know when they are working or not. With the ibc, when I press on the brake pedal I get no felt braking from the camper even when set to the highest gain setting (10) which considering the general light weight of my camper (5,000 lbs. Loaded), the highest gain setting should lock up my trailer brakes. The ibc setting for my camper is electric. I took my truck and camper to the Toyota dealer so they could test the controller while hooked up. The technician hooked the truck up to a diagnostic computer and went through all the settings both static and on a test drive. The computer showed that the brake controller was working; however, even when set on the highest setting, I could not feel the trailer brakes kicking in. Their conclusion was in spite of not feeling the brakes, that the brake controller was working. Toyota says it's okay, but if I jack-knife my camper, I'm the one who has to deal with the consequences of the accident. As the result of having zero confidence in the ability of the ibc, I already installed an after-market bc (safety can't wait for a fix). I believe that people who are towing with this ibc, particularly anyone towing an eight or nine thousand pound camper is at risk as well as the public on our roadways. The dealer told me my ib

NHTSA complaint #10870473
Dec 8, 2015power train, electronic stability control (esc), service brakes
The drivetrain on my 2016 Toyota Tundra are not allowing the wheels to rotate freely. Additionally, the wheels are locking up on the truck. On 6 dec, I picked up my Tundra from the dealership's service depart after having the rear differential repaired. The vehicle started to drive sluggish. As I neared my home, I tried to test the 2wd and 4wd functions of the vehicle. I… Read more

The drivetrain on my 2016 Toyota Tundra are not allowing the wheels to rotate freely. Additionally, the wheels are locking up on the truck. On 6 dec, I picked up my Tundra from the dealership's service depart after having the rear differential repaired. The vehicle started to drive sluggish. As I neared my home, I tried to test the 2wd and 4wd functions of the vehicle. I attempted to test the repair that was done. The wheels on the vehicle started to have problems rotating freely and locking up. While in 4wd the vehicle would not move. It appeared as if the breaks were locked on the vehicle. Four days later, the vehicle still drives sluggish. While driving at speeds of 45mph, I would take my foot off the accelerator and the vehicle would almost come to a complete stop on its own. Currently the vehicle acts like it wants to drive in 4wd low and high mode. Additionally, the wheels are acting like they do not want to rotate freely. As of 6am on 8 dec, I cannot drive the vehicle over 25 MPH. The vehicle is idling over 4000 rpm and not changing gears. The vehicle is registering being in 4wd low but the selector switch is on 2wd mode.

NHTSA complaint #10808959
Dec 7, 2015power train, service brakes
While driving back from florida on 30 nov, I heard a humming noise coming from the rear of my Toyota Tundra. On 2 dec 2015, the dealership did service on the truck to address the noise. The dealership replaced the rear differential assembly and did something to the lsd. I picked the vehicle up on 6 december 2015, the rear wheels started locking up and made it difficult… Read more

While driving back from florida on 30 nov, I heard a humming noise coming from the rear of my Toyota Tundra. On 2 dec 2015, the dealership did service on the truck to address the noise. The dealership replaced the rear differential assembly and did something to the lsd. I picked the vehicle up on 6 december 2015, the rear wheels started locking up and made it difficult to drive the vehicle. I let the vehicle set over the weekend. On 7 dec 2015, I attempted to drive the vehicle again, the wheels were still locking up and the vehicle had a burning smell. I have an appoint to return the vehicle on 9 dec 2015.

NHTSA complaint #10808857
← All 2016 Toyota Tundra problems & recalls