Aug 24, 2020service brakes
Re 2008 Tundra, the brake pedal goes almost all the way to the floor and feels "squishy" . Wilde Toyota in westallis,wisconsin inspected my vehicle and purportedly installed all new brake fluid and said they did a scanning tool computerized bleed of the whole brake system including the ABS pump system bleed. They cahrged me aprox $113.00 for that service and the issue is… Read more
Re 2008 Tundra, the brake pedal goes almost all the way to the floor and feels "squishy" . Wilde Toyota in westallis,wisconsin inspected my vehicle and purportedly installed all new brake fluid and said they did a scanning tool computerized bleed of the whole brake system including the ABS pump system bleed. They cahrged me aprox $113.00 for that service and the issue is unresolved...the brake pedal still easily goes to the floor when the vehicle is running. Wilde Toyota states that this is a normal condition for this 2008 Tundra as they say that they have other 2008 Tundra's that do the same. They state their is no fixing of the issue and that they allege my brake pedal travel is within specifications guidelines set by the nhts.. I've searched the internet and have found other Toyota owners whom has the similar issue with their brakes. When the truck is not running, the brake pedal is hard and doesn't go to the floor and that it what wilde Toyota says is within specifications. But that information or specification isn't relevant when it come to safety, as what is important, is how the brakes work and operate and feel when driving the vehicle. Please look into this matter and consider modifying your specifications and requirments etc of this issue to have the specifications include the distance the brake pedal can travel when driving the vehicle. Thank you in advance for this service you offer. I have a video of me using my weaker left hand to depress the brake p
NHTSA complaint #11350905
Dec 28, 2017structure, wheels, service brakes
Also my 08 Tundra just like my 03 Toyota sequoia has the paint coming off the hood and very top of truck including chipping and pain coming off and clear coat, has to be bad paint there using.
NHTSA complaint #11057021
Oct 10, 2017service brakes
The brake pedal feels "soft" when applying the brakes. Pedal travels farther than usual, must step down hard for brakes to fully engage - no air in brake lines - brake fluid reservoir is full - all brake pads/shoes w/90% life remaining. C1336 code keeps coming up referring to "zero point" calibration, and ABS pump. Condition is present during all types of driving - city -… Read more
The brake pedal feels "soft" when applying the brakes. Pedal travels farther than usual, must step down hard for brakes to fully engage - no air in brake lines - brake fluid reservoir is full - all brake pads/shoes w/90% life remaining. C1336 code keeps coming up referring to "zero point" calibration, and ABS pump. Condition is present during all types of driving - city - highway - turning - backing. Symptoms started in early september 2017.
NHTSA complaint #11032643
Sep 28, 2017electrical system, visibility, vehicle speed control, service brakes
Tl* the contact owns a 2008 Toyota Tundra. The contact stated that the vehicle stalled. When the brake pedal was depressed, there was a strong vibration and force had to be applied to the pedal. The vehicle was included in four manufacturer recalls and the contact was uncertain if the failures were related to the recalls. The contact planned to take the vehicle to pedersen… Read more
Tl* the contact owns a 2008 Toyota Tundra. The contact stated that the vehicle stalled. When the brake pedal was depressed, there was a strong vibration and force had to be applied to the pedal. The vehicle was included in four manufacturer recalls and the contact was uncertain if the failures were related to the recalls. The contact planned to take the vehicle to pedersen Toyota (4455 s college ave, fort collins, co 80525, (970) 372-4185) to diagnose the vehicle and complete the recall repairs for NHTSA campaign numbers: 12v491000 (visibility), 11v148000 (tires), 10v017000 (vehicle speed control), and 09v388000 (vehicle speed control). The manufacturer was notified. The approximate failure mileage was 122,900. Parts distribution disconnect.
NHTSA complaint #11030406
Apr 28, 2017electrical system, vehicle speed control, service brakes
Toyota dealership inspection reported on 10/05/16 that actuator assembly failed. Mileage 122,482. Disabiling, ABS brake, speedometer,odometer, cruise control,and displaying engine check lights for ABS. This occurred one day after replacing water pump, water hoses, serpentine belt, and fluids associated with service. Cost estimate $2642.78. Started engine and engine indicator… Read more
Toyota dealership inspection reported on 10/05/16 that actuator assembly failed. Mileage 122,482. Disabiling, ABS brake, speedometer,odometer, cruise control,and displaying engine check lights for ABS. This occurred one day after replacing water pump, water hoses, serpentine belt, and fluids associated with service. Cost estimate $2642.78. Started engine and engine indicator lights showed engine check and ABS malfunction started moving and speedometer cruise control inop along with odometer.
NHTSA complaint #10981204
Dec 13, 2016power train, service brakesCrash
I have a remote start system on my truck, I remote start my truck. The truck was parked on a level surface, nose pointing in towards house. The driveway drops off into a slope, but the truck was on the flat surface area. We go outside to get in it, and it's gone. It's not in the driveway and it's no where to be seen. I look over towards the creek, nope not there. Look out… Read more
I have a remote start system on my truck, I remote start my truck. The truck was parked on a level surface, nose pointing in towards house. The driveway drops off into a slope, but the truck was on the flat surface area. We go outside to get in it, and it's gone. It's not in the driveway and it's no where to be seen. I look over towards the creek, nope not there. Look out front, there's my truck and it is backed up on half in the street half in then the front yard. It's sitting where our mailbox should be. It is running and side marker lights are lit. I go look, open the drivers door to see if anybody is in it, nope, not a soul. It's in park, the 4 wd lo alarm is beeping, the 4lo LED is lit on the dash, however, the switch/knob is still on the 2wd mode position. I press the brake pedal and the motor cuts off. So the remote start safety features were working properly. I have photos and a video (day after) showing where the truck landed and the path it traveled. I do not have any documents yet as this occurred last night. Dealership has the truck and will be evaluating the rear end and drive shaft, but insurance will not pay for inspection of the transmission. Cause of accident is unknown, but speculate something in the transmission failed while parked.
NHTSA complaint #10935160
Jul 15, 2015service brakes
Upon routine brake change/inspection uncovered that brake caliper mounting bolt was completely deteriorated (Toyota part number to47814-0c010) permitting the entire brake caliper to move freely around rotor. Dealership noted vehicle is not safe to drive in condition until repair could be made. Reporting this as significant issue given that it is determined unsafe by Toyota… Read more
Upon routine brake change/inspection uncovered that brake caliper mounting bolt was completely deteriorated (Toyota part number to47814-0c010) permitting the entire brake caliper to move freely around rotor. Dealership noted vehicle is not safe to drive in condition until repair could be made. Reporting this as significant issue given that it is determined unsafe by Toyota dealer, directly effects ability to stop, and is happened to a low mileage vehicle not driven hard. Half inch caliper pins should not deteriorate.....updated 01/13/16 *bf
NHTSA complaint #10734239
Jul 13, 2015parking brake, service brakes
Tl* the contact owns a 2008 Toyota Tundra. While the vehicle was at the dealer being serviced for an unrelated issue, the contact was informed that the axle, the bearing, and the brake backing plate failed. The failure could cause the brakes to wear out prematurely. In addition, the emergency brake failed. The vehicle was not repaired. The manufacturer was made aware of the… Read more
Tl* the contact owns a 2008 Toyota Tundra. While the vehicle was at the dealer being serviced for an unrelated issue, the contact was informed that the axle, the bearing, and the brake backing plate failed. The failure could cause the brakes to wear out prematurely. In addition, the emergency brake failed. The vehicle was not repaired. The manufacturer was made aware of the failure. The failure mileage was 47,000. The VIN was not available.
NHTSA complaint #10733668
Apr 12, 2015service brakes
Started vehicle. Would not shift out of park. Released lock manually and drove to dealer (6 miles). They replaced fusible link and found ABS controller not working. I was told to drive home and they would call 4 days later on availability of used controller ($300 vs $1953). Brakes ok but no ABS. Had same thing happen august 31, 2014. Had the Tundra hauled to dealership.… Read more
Started vehicle. Would not shift out of park. Released lock manually and drove to dealer (6 miles). They replaced fusible link and found ABS controller not working. I was told to drive home and they would call 4 days later on availability of used controller ($300 vs $1953). Brakes ok but no ABS. Had same thing happen august 31, 2014. Had the Tundra hauled to dealership. Tundra was at the dealership for a month waiting for replacement fusible link. Backordered - out of stock all the way to japan. Toyota had to manufacture more. More than expected demand? Both times warning lights for brake, check engine, ABS, air bag were on. Turn signals and speedometer not working. Dealership told me they had no idea of the cause. Told them low voltage caused this to happen to another vehicle I have. Makes me wonder if there are being truthful with me and if other safety systems may be compromised. *tr
NHTSA complaint #10705225
Feb 4, 2015electronic stability control (esc), service brakesCrash
Tl* the contact owns a 2008 Toyota Tundra. While driving approximately 40 MPH and attempting to engagr the brakes, the brake pedal sank to the floor and the vehicle failed to stop crashing into a deer. The contact mentioned that immediately after the crash, the vehicle stability control, ab,s and 4wd warning indicators illuminated. The vehicle would no longer shift into 4wd. A… Read more
Tl* the contact owns a 2008 Toyota Tundra. While driving approximately 40 MPH and attempting to engagr the brakes, the brake pedal sank to the floor and the vehicle failed to stop crashing into a deer. The contact mentioned that immediately after the crash, the vehicle stability control, ab,s and 4wd warning indicators illuminated. The vehicle would no longer shift into 4wd. A police report was filed. The vehicle was taken to the dealer and diagnosed that there was an internal failure in the ABS actuator pump and a faulty speed sensor. The vehicle was not repaired. The manufacturer was not made aware of the failure. The approximate failure mileage was 80,000.
NHTSA complaint #10681285
Jan 18, 2015electrical system, vehicle speed control, service brakes
I have been having this on going problem with my 2008 Tundra 5.7 4x4 the 4x4 hi/l, vsc, ABS are blinking while driving at different times. Brought truck in ran test and nothing came back. Truck also feels like it bunny hops when going out of first into 2nd gear. Toyota still said nothing is wrong. *tr
NHTSA complaint #10676311
Nov 29, 2014electrical system, vehicle speed control, electronic stability control (esc), service brakes
2008 Toyota Tundra 5.7l double cab w/74,500 miles 4hi, 4lo, ABS, vsc lights come on and flash at random intervals. The first time this happened, the cruise was set at 65 when all four lights started flashing. All other indications are normal. The truck will not engage 4hi, 4lo or vsc until it is turned off and restarted. The same day after approximately 10 miles of driving… Read more
2008 Toyota Tundra 5.7l double cab w/74,500 miles 4hi, 4lo, ABS, vsc lights come on and flash at random intervals. The first time this happened, the cruise was set at 65 when all four lights started flashing. All other indications are normal. The truck will not engage 4hi, 4lo or vsc until it is turned off and restarted. The same day after approximately 10 miles of driving all four lights started flashing again, this time the cruise was not engaged. Sometimes one or two days pass before it happens again. No error codes are indicated on the computer. *tr
NHTSA complaint #10661276
Nov 10, 2014service brakes
When applying brakes at high speeds the vehicle shakes. I have replaced both front disks and brake pads all around and the vehicle still does this. *tr
NHTSA complaint #10653990
Mar 12, 2014power train, service brakes
I started my truck and noticed that the ABS brake light was on and the vehicle stability control (vsc) light and the 4-hi and 4-lo lights were flashing as well. The parking lot I was in was mostly empty and slick, so I tried a hard breaking and sure enough the ABS system fails to operate. I tried to accelerate and the vsc failed to work as well. I tried to shift into 4 wheel… Read more
I started my truck and noticed that the ABS brake light was on and the vehicle stability control (vsc) light and the 4-hi and 4-lo lights were flashing as well. The parking lot I was in was mostly empty and slick, so I tried a hard breaking and sure enough the ABS system fails to operate. I tried to accelerate and the vsc failed to work as well. I tried to shift into 4 wheel drive and that failed as well. I went online and found a number of forums where others talked about having the exact same failure. Some stated that the wiring harness failed, others that it was a bad connection. I feel that a failure like this without warning can put drivers at risk. We have come to rely on these technology advances making our vehicles safer to drive, and if they fail without warning, in the middle of a hard braking situation, this could lead to disastrous situation and possible loss of life. *tr
NHTSA complaint #10568727
May 13, 2013service brakes
The 2008 Toyota Tundra sr5 violently shakes when braking at 40 plus miles an hour causing instability when driving and a major distraction. Tsb 0131-12 for this issue was released in august 2012. However, Toyota dealerships and Toyota USA headquarters will not fix the defect unless the vehicle is under warranty. Since, my vehicle is a 2008, the warranty expired in 2011 but faulty brake problem still exist. *tr
NHTSA complaint #10511818
Feb 27, 2013service brakes
Tl* the contact owns a 2008 Toyota Tundra. The contact stated that the antilock brake light illuminated and the speedometer did not register current vehicle speed. The vehicle was taken to the dealer who performed a diagnostic which located the failure at the ABS actuator. The manufacturer was not made aware of the failure. The VIN was not available. The vehicle was not… Read more
Tl* the contact owns a 2008 Toyota Tundra. The contact stated that the antilock brake light illuminated and the speedometer did not register current vehicle speed. The vehicle was taken to the dealer who performed a diagnostic which located the failure at the ABS actuator. The manufacturer was not made aware of the failure. The VIN was not available. The vehicle was not repaired. The failure and current mileage was 43,331.
NHTSA complaint #10500667
Oct 14, 2011service brakes, hydraulic, electrical system
The ABS actuator failed on my 2008 Toyota Tundra. Which causes all my dash function to fail, no antilock brakes, no 4x4, speedometer inoperable. Cost for repairs. $2500. Trucks only three years old. *tr
NHTSA complaint #10430255
Apr 12, 2011service brakes, hydraulic, electrical system, electronic stability control (esc), traction control system
2008 Toyota Tundra double cab 5.7 4x4. Vsc/4hi/4lo/ABS/brake lights all start flashing. Have brought to dealer 3 times. Have 88,500 miles on truck. Warrenty runs out at 100,000. Dealer states they can not reproduce problem. Showed them online articles of same vehicle with same issues and how it was resolved. They refuse becuase there is no code. *tr
NHTSA complaint #10395567
Mar 10, 2010service brakes, hydraulic, power train, vehicle speed controlCrash2 injured
7/29/09 driving on the freeway at 65 MPH transmission started shifting gear and MPH was moving from 60 to 80 up and back down. Applied emergency brake , shifted gear to neutral but no actions could stop the Toyota truck. My nephew and I jumped from the truck when I determined that it was slowing down and no cars were passing on the freeway. It came to a sudden stop 1/2 mile… Read more
7/29/09 driving on the freeway at 65 MPH transmission started shifting gear and MPH was moving from 60 to 80 up and back down. Applied emergency brake , shifted gear to neutral but no actions could stop the Toyota truck. My nephew and I jumped from the truck when I determined that it was slowing down and no cars were passing on the freeway. It came to a sudden stop 1/2 mile away from were we jumped. The engine had smoke coming out and it revving up and down. Towed it to dealer and they said no problem found and accused it was the floormats after their master tech looked at it. No repairs were made and they wanted to charge us for worn brakes and bent rotors which were cause by this event. In-disagreement we towed to another Toyota and they determined that the complaint regarding the sudden acceleration, worn brake pads, and bent rotors cannot be found. We took back the car for 6 months and a second incident happen 1/15/10. I was driving on a residential street and suddenly the truck was accelerated from 25 MPH to 60 MPH. I performed all ways to stop the truck but it would not stop. To avoid hitting a big-rig I had to verge into an embankment. Again police and fire dept were called but no one accident occurred so no reports were taken. Again we towed it to the dealer stating the same situation and again no problem has been found. They still have the truck until today 3/9/10 and have not gave any answer on what is had occurred and no actions had been taken. I have
NHTSA complaint #10318367