CarProblemsDB

2004 Toyota Tundra steering problems

26 owners reported steering problems — 6% of all 466 complaints about the 2004 Toyota Tundra.

Steering complaints by Toyota Tundra year

20258
20248
202312
20229
20212
20205
20193
20185
20175
20167
20152
20146
201310
201212
201119
20106
20092
200811
200711
200625
200521
200426
200322
200238
200123
200043

What owners report

May 19, 2026steering
1) the newly installed rack & pinion rack locks up and tried to turn right when on a continuous or left turn followed closely by another left turn. 2) my safety and the other drivers near me were all in danger when the loss of steering control occurs. The problem makes the vehicle want to turn hard to the right and the hydraulics are too strong to control the steering. 3) the… Read more

1) the newly installed rack & pinion rack locks up and tried to turn right when on a continuous or left turn followed closely by another left turn. 2) my safety and the other drivers near me were all in danger when the loss of steering control occurs. The problem makes the vehicle want to turn hard to the right and the hydraulics are too strong to control the steering. 3) the problem has not been confirmed by a dealer or independent service center, but the problem still exist and is repeatable for any needed inspection. 4) the vehicle has not been inspected by any outside entity, but is available for inspection. The problem still exist and can be confirmed. 5) there are no warning lights or symptoms. When it happens, all of the sudden the truck wants to make a hard right and there is nothing you can do to stop it, other than stop and let go the the steering wheel.

NHTSA complaint #11738850
May 26, 2021steering, suspension, unknown or other
I had the dealer take my truck in for the frame recall. I asked for them to replace the frame because I was not comfortable with how they were handling it. Per the service record they filled in perforations and “undercoated. I did not believe that filling in existing perforations was the safest way to handle this. After brining the truck to a shop to check the steering we… Read more

I had the dealer take my truck in for the frame recall. I asked for them to replace the frame because I was not comfortable with how they were handling it. Per the service record they filled in perforations and “undercoated. I did not believe that filling in existing perforations was the safest way to handle this. After brining the truck to a shop to check the steering we were told that they wouldn’t even put it up on a lift. The steering issue was that the rack and pinion steering was literally falling out due to the rusted frame. We drove this vehicle home and parked it. About a week later the spare tire fell out right onto our driveway. Needless to say, I am certain there are many more Toyota trucks out there ready to fall apart on the road. We contacted Toyota corporate several times to try to rectify this mishandling of our recall. We called and sent certified letters. We asked to share the cost of a new frame and they said no. We then had the truck towed to a shop who could do the work. They ordered a frame from Toyota only to be contacted 2 months later saying that the frame was discontinued and they wouldn’t be sending it after all (we were willing to pay fir the frame and install because we had a useless and unsafe vehicle. We finally found a shop over an hour away who could rebuild/fabricate the frame and replace the fallen out steering etc. We had that truck towed about 60 miles away to have this work completed. This mishandling of the recall by Toyota and the

NHTSA complaint #11418635
Dec 18, 2020steering, structure, unknown or other

My vehicle frame has totally rotted out by rust.

NHTSA complaint #11384114
Oct 9, 2020steering, suspension, structure
Started hearing clunking noise in truck. Made appointment with ase certified mechanic and he asked us to come back to the shop. The structure of the frame that holds the rack and pinion steering and anti-sway bar mount was gone. Both of the tops of the frame of the cross member that goes under the engine was missing. The frame rail under the cab is separating. He advised that… Read more

Started hearing clunking noise in truck. Made appointment with ase certified mechanic and he asked us to come back to the shop. The structure of the frame that holds the rack and pinion steering and anti-sway bar mount was gone. Both of the tops of the frame of the cross member that goes under the engine was missing. The frame rail under the cab is separating. He advised that this condition was a massive safety issue and that I should contact Toyota and advise them. I called a dealership in zanesville and they advised they could not help because it was not a recall and Toyota gave me a case number and transferred me to someone else who told me they could not help me. He also got a second opinion from another individual who also said that this is a safety issue that should be addressed by the manufacturer. I have more photos and I now know I can not drive a truck that I spent $24,000 on june of 2019. I am glad I did not wreck my vehicle and hurt my family or anyone else because of this issue. Please help me repair my truck. When we purchased the vehicle the factory undercoating was still in tact and this was not visible underneath.

NHTSA complaint #11363645
Apr 16, 2020steering, suspension, structure
My vehicle has major frame damage. There are large holes near the front crossmembers on both sides. I was told by Toyota that the frame had been sprayed several years earlier. However, the frame has continued to rust severely and the coating has completely flaked off. The representative I spoke to stated that was the only resolution, and that nothing can be done. My case is… Read more

My vehicle has major frame damage. There are large holes near the front crossmembers on both sides. I was told by Toyota that the frame had been sprayed several years earlier. However, the frame has continued to rust severely and the coating has completely flaked off. The representative I spoke to stated that was the only resolution, and that nothing can be done. My case is not the only one. Even the dealer located near me states that this is a well known issue. Several years received new or repaired frames for the same issue. How can it be, that the same generation vehicle one year later is not eligible? My child rode countless times in that vehicle. What if something had happened? *tr

NHTSA complaint #11321300
Mar 9, 2019steering

Gear shift leaver has detached from steering column. This is the second time this has happened (1st time was in 2011). Repair done then was with factory part. Truck cant be driven & if happens while in any gear other than park can be a safety issue, especially on unlevel parking pad. Appears to be lots of Tundra owners on the Toyota owner/Tundra owner websites experiencing same issue.

NHTSA complaint #11185514
Nov 2, 2017steering, wheels

As I was driving on the interstate(I-10) last week all of a sudden my truck began moving to the right then to the left. It went back and forth about 4 times.while it was doing this, I had no control of the truck. Good thing no cars were around me because I would have hit them.

NHTSA complaint #11042544
Mar 15, 2017steering, structure

Tl* the contact owns a 2004 Toyota Tundra. While driving 55 MPH, the frame rods fractured due to excessive rust and corrosion. The contact temporarily lost steering function. The vehicle was not repaired. The manufacturer was made aware of the failure. The failure mileage was 130,000.

NHTSA complaint #10966197
Jun 22, 2016steering, electrical system
Tl* the contact owns a 2004 Toyota Tundra. The contact stated that there was an electrical failure in the vehicle. The horn, door locks, power windows, and all other electrical components except the alarm malfunctioned. The horn sounded while the vehicle was in motion and parked. The contact also stated that the steering wheel made a loud noise while driving. The seat belt… Read more

Tl* the contact owns a 2004 Toyota Tundra. The contact stated that there was an electrical failure in the vehicle. The horn, door locks, power windows, and all other electrical components except the alarm malfunctioned. The horn sounded while the vehicle was in motion and parked. The contact also stated that the steering wheel made a loud noise while driving. The seat belt warning light was the only light illuminated on the instrument panel. The contact felt that the vehicle was unsafe to drive. The dealer and manufacturer stated that the vehicle was not under warranty and the contact would be responsible for the repair costs. The failure mileage was 176,000. Updated 08/16/16*lj consumer stated I feel this is a safety issue related to steering column and related parts including airbag-dealer steering is not related to safety concerns- I feel this can result in accident by losing. Steering consulting control resulting in possible injury to myself/ and others on the road regardless of the mileage consumer's vehicle had the dealer appeared not to be concerned about safety. Updated 6/18/18*jb

NHTSA complaint #10875859
Feb 20, 2007steering, suspensionCrash
Tl* the contact owns a 2004 Toyota Tundra. The contact viewed a recall notice for the lower ball joints on the internet. The dealer advised the contact they were waiting on a recall notification from the corporate office. The contact was having problems maintaining control of the vehicle while driving. The current and failure mileage was 100,000. The dealer diagnosed… Read more

Tl* the contact owns a 2004 Toyota Tundra. The contact viewed a recall notice for the lower ball joints on the internet. The dealer advised the contact they were waiting on a recall notification from the corporate office. The contact was having problems maintaining control of the vehicle while driving. The current and failure mileage was 100,000. The dealer diagnosed the failure as the power steering pump and replaced it at cost to the contact. Two to three weeks ago the dealer diagnosed the lower ball joints, and advised the contact that they were operating normally. On 2/19/07, while driving 25 MPH the driver lost control of the vehicle and crossed the center line, hitting a wooden post. There was damage to the fender, the hood and the tire. The driver was unable to open the door. There were no prior warning light indicators. There were no injuries ,and the road conditions were dry. The vehicle was towed to a Toyota dealer. The mechanic advised the contact that they received notification of the lower ball joint recall and that the vehicle was a part of the recall. The contact has the invoice from the power steering replacement. *ak

NHTSA complaint #10183000
Feb 14, 2007steeringCrash1 injured
I drove off the highway and it felt like the truck was steering itself. I had this steering problem since it was new- dealer said it was tire balance and later shocks- but " we won't throw parts at it"- a independent shop replaced the tie rod and the steering veering off stopped. The problem was noticeable when I was driving and going around curves- the truck was hard to… Read more

I drove off the highway and it felt like the truck was steering itself. I had this steering problem since it was new- dealer said it was tire balance and later shocks- but " we won't throw parts at it"- a independent shop replaced the tie rod and the steering veering off stopped. The problem was noticeable when I was driving and going around curves- the truck was hard to control- shook and needed steering help. *nm

NHTSA complaint #10182554
← All 2004 Toyota Tundra problems & recalls