Sep 6, 2026suspension, power train
I own a 2004 Toyota Sequoia and have owned it since it was built by Toyota. In 2013 Toyota had a safety recall on the frame for that vehicle because in certain northern states they are having issues with the frame rotting and braking. I brought my vehicle in may of 2013 and carlson Toyota in minnesota inspected. It said that it passed and they installed a corrosion kit. This… Read more
I own a 2004 Toyota Sequoia and have owned it since it was built by Toyota. In 2013 Toyota had a safety recall on the frame for that vehicle because in certain northern states they are having issues with the frame rotting and braking. I brought my vehicle in may of 2013 and carlson Toyota in minnesota inspected. It said that it passed and they installed a corrosion kit. This vehicle has been meticulously cared for over the years and it still looks that way on the exterior and interior. I have always had this vehicle enrolled in a car wash club so it gets washed almost daily in the winter and has for its entire life. But the frame of this vehicle is to the point now where it shouldn't be driven. It is so dangerously, rotted and breaking apart. I had the vehicle in florida for spring break and while I was driving it there it was making some weird clunking noises. So I took it to a repair shop and the frame repair shop said that the frame was beyond repair and probably should not be driven. But it was my only vehicle and I had no choice but to drive it back to minnesota. Since then I've had several issues when taking off and stopping with loud clunking noises, but it is my daily vehicle and I believe that Toyota should do something to fix it or replace it.
NHTSA complaint #11762470
Jul 1, 2026suspension, wheels, service brakes
Description of the safety crash/informed incident: vehicle information: 2004 Toyota Sequoia (VIN: [xxx]) incident date: [xxx] location: [xxx] police agency: california highway patrol (report #:[xxx]) speed at incident: highway speeds (~65 MPH) description of defect/failure: structural mechanical failure leading to sudden, catastrophic wheel separation at highway speeds. Nine… Read more
Description of the safety crash/informed incident: vehicle information: 2004 Toyota Sequoia (VIN: [xxx]) incident date: [xxx] location: [xxx] police agency: california highway patrol (report #:[xxx]) speed at incident: highway speeds (~65 MPH) description of defect/failure: structural mechanical failure leading to sudden, catastrophic wheel separation at highway speeds. Nine days prior to the incident, on [xxx], the vehicle underwent a comprehensive brake, rotor, and tire rotation service at a certified Toyota dealership (Toyota of chula vista, work order #[xxx]). While traveling on the interstate, the right rear passenger wheel assembly completely detached from the moving vehicle. As a result, the wheel flew off crossing several traffic lanes, traveling over a jersey wall on the freeway shoulder, landing into a nearby drainage ditch. The vehicle dropped onto the remaining brake/rotor assembly, generating extreme sparks, causing an immediate loss of braking pressure, and creating an imminent threat of a rollover or multi-vehicle fatal collision. Subsequent post-incident inspection on a maintenance lift revealed that all wheel studs on the right rear hub were completely sheared or stripped off. This indicates a severe technician failure to properly torque the wheel lug nuts to factory specifications during reassembly, or an un-diagnosed structural failure of the wheel mounting components following certified dealer service. Information redacted pursuant to the freedom of infor
NHTSA complaint #11747762
Apr 11, 2024suspension, unknown or other
Frame is rotting out
NHTSA complaint #11582378
Apr 30, 2021suspension
I was simply parking my 2004 Toyota Sequoia in parking lot space. Left front tire fell completely off the car without any previous warning of pending problems! Ball joint catastrophically failed! Prior recent new tires and alignment showed no pending problems. Did a check and found many prior ball joint issues for this car and a prior recall years ago. Towed to Toyota… Read more
I was simply parking my 2004 Toyota Sequoia in parking lot space. Left front tire fell completely off the car without any previous warning of pending problems! Ball joint catastrophically failed! Prior recent new tires and alignment showed no pending problems. Did a check and found many prior ball joint issues for this car and a prior recall years ago. Towed to Toyota dealership in capitola ca. They replaced ball joint and related parts. They charged me lots of money claiming that this vehicle had "previously been recalled and repaired in 2007 so no liability on their part. I called Toyota corporate and complained and was bounced around until a fellow named "garret" told me the ball joints had been "fixed" in 2007 during a recall. Great. Then why do these issues continue? My car is driven only on public streets and there was no warning of this impending failure. The ball joint and related simply failed catastrophically. I take excellent care of this vehicle as I intended on keeping it regardless of mileage. What bs is Toyota pulling when their Sequoia (and other similar Toyota vehicles) continue to catastrophically fail without warning? I wonder how many people died on the freeway etc because of this? I have personally owned and/or family, friends etc. Many cars, trucks etc. Ball joints like brakes, tires hoses etc wear out slowly and give ample warning when they need replacement ie tire wear is increased, steering difficulty etc. Not in Toyota's case. Th
NHTSA complaint #11414630
Mar 15, 2021suspension
Left front (drivers side) wheel ball joint(s) failed catastrophically causing wheel to fall off and wedge under car while pulling into a parking space. No prior warning, no prior noise, no prior steering issues, no strange tire wear (tires just replaced 6 months ago). Just instant and catastrophic failure!
NHTSA complaint #11403018
Apr 20, 2020suspension
I have a 2004 Toyota Sequoia. The vehicle has been well taken care of with numerous receipts to prove it. Upon further inspection of the vehicle, I have observed a 'rot' hole in the rear part of the frame. The whole in the frame is approximately the size of a dollar bill and spreading. There are other parts of the frame that will need attention in the future. Toyota has… Read more
I have a 2004 Toyota Sequoia. The vehicle has been well taken care of with numerous receipts to prove it. Upon further inspection of the vehicle, I have observed a 'rot' hole in the rear part of the frame. The whole in the frame is approximately the size of a dollar bill and spreading. There are other parts of the frame that will need attention in the future. Toyota has recalled Sequoia model years 2005 and up and have neglected to include the 2004. It is apparent that the 2004 Sequoia is subject to the same faulty frame manufacturing as other models/ years of numerous Toyota's. My vehicle has approximately 137,600 miles on it. I have maintained vehicles from from the 90s that have better frame construction than my Toyota. I believe that the frame on my 2004 Sequoia will need frame patches in the future as well as many other metal components connected to the frame replaced.
NHTSA complaint #11321730
Feb 3, 2020suspension, unknown or other
We bought it in 2014 with 76k and the frame had recently been coated. Supposedly it was from texas, and we live in northern minnesota. The frame looked good and seemed solid, but within a year or two all of the coating fell off revealing very rusty metal. By 3 years (2017) there were holes in the bottom of the frame mainly behind the front tires area, and the rest of the… Read more
We bought it in 2014 with 76k and the frame had recently been coated. Supposedly it was from texas, and we live in northern minnesota. The frame looked good and seemed solid, but within a year or two all of the coating fell off revealing very rusty metal. By 3 years (2017) there were holes in the bottom of the frame mainly behind the front tires area, and the rest of the frame is also quite rusty. I had to replace the front sway bar end links but they broke soon after and kept breaking within a few months after repeated replacement due to excessive frame movement. It feels less safe without a functional sway bar attached to the frame and has more body roll with more risk of rollover. The frame is rotting from the inside out, and the rust is spreading like cancer in the surrounding areas underneath. The body has almost no rust at all. I parked it in the winters twice now, hoping to buy time. But I'm counting the days that it will be unsafe to drive anymore. I'm not even sure when to determine when that will be, and am hoping it doesn't have catastrophic failure at highway speeds like others have had with the earlier sequoias. I bought this for my wife and paid $16000 cash for it. We've put on 60k miles but expected to get many more years out of it being that it is so solid and reliable otherwise. This frame is horrible, and probably would have shown itself a problem sooner, had it not been in texas most of its previous years. It is wrong that the 01-04 years are ex
NHTSA complaint #11306844
Jan 28, 2020suspension, electrical system, structure
Took 2004 Sequoia to kings Toyota for the airbag recall as well as diagnostic eval of vsc ABS lights issue. Received a phone call that the tech could not determine the electrical problem unless we paid an additional $360 for more time to diagnose and that the frame was rusted through with large holes. Wondered if we wanted to pursue the electrical issue with the larger safety… Read more
Took 2004 Sequoia to kings Toyota for the airbag recall as well as diagnostic eval of vsc ABS lights issue. Received a phone call that the tech could not determine the electrical problem unless we paid an additional $360 for more time to diagnose and that the frame was rusted through with large holes. Wondered if we wanted to pursue the electrical issue with the larger safety issue with the frame. Original issue occurred with lights coming on (had happened several times previously) followed by the power windows ceasing to work, several hours later the wipers and window seemed sluggish and the car lost all power. Had to jump the car several times to get off the road and then when jumping no longer worked, we had to push the vehicle into a church parking lot. After being told by mr. Howard that they don't see vehicles come into service with large holes in the frame, I researched online and found that 10s of thousands of Toyota trucks, including 05-08 sequoias, have been recalled - crc applied and frames replaced as well as Toyota buying back 95-00 trucks with rusted frames for 1.5 times the blue book value. 04 sequoias mentioned more than 300 times for the vsc, tailgate and rusted frame issues that are prevalent in this model - my vehicle has all 3. Spoke with colin, the service manager, who reiterated what I found online. Toyota will do nothing since the recall is closed and did not include the 04 models.
NHTSA complaint #11302665
Dec 28, 2019steering, suspension, structure
Frame has rust holes and the steering stabilizer mount rusted completely off. Very unsafe ! The rest of the car is in excellent condition so the severity of rust on the frame seems very out of place. This issue is extreme and not normal. Not acceptable from a manufacturer known for its quality systems. Tps six sigma embarrasment in my opinion
NHTSA complaint #11291704
Apr 8, 2019suspension, structure
Toyota Sequoia with 139k miles. This suv had a frame recall in 2014, Toyota dealer applied the paint/epoxy to the rusted frame instead of replacing the rusted frame. The paint peeled off within 6 months of the application. Now the frame is rusted very badly. When driving it makes grinding noises. My mechanic said that because of extensive frame rust, the frame has gotten… Read more
Toyota Sequoia with 139k miles. This suv had a frame recall in 2014, Toyota dealer applied the paint/epoxy to the rusted frame instead of replacing the rusted frame. The paint peeled off within 6 months of the application. Now the frame is rusted very badly. When driving it makes grinding noises. My mechanic said that because of extensive frame rust, the frame has gotten weaker and is slightly bent. This makes the moving parts touch the other parts of the body/frame resulting in the noises. He suggested replacing the rusted frame.
NHTSA complaint #11194534
Mar 20, 2019suspension, unknown or other
Entire frame assembly has rusted and vehicle is unsafe to drive. Toyota dealership, upon air bag recall fix, informed me of a recall or warranty repair for the Sequoia rusted frames. Toyota corporate claims they cannot do anything since the "recall' has expired. I never received a notification. Many others have this same issue and Toyota is fully aware of this problem and has… Read more
Entire frame assembly has rusted and vehicle is unsafe to drive. Toyota dealership, upon air bag recall fix, informed me of a recall or warranty repair for the Sequoia rusted frames. Toyota corporate claims they cannot do anything since the "recall' has expired. I never received a notification. Many others have this same issue and Toyota is fully aware of this problem and has recalled other model years for frame replacements. Does someone need to die before we get appropriate action?
NHTSA complaint #11190250
Nov 8, 2018suspension, structure, unknown or other
The rear drivers frame snapped in half. Broke in front of rear wheel. No help from Toyota. So it sits in driveway. Rumor has it a recall is on way.
NHTSA complaint #11150220
Apr 8, 2017suspension, electronic stability control (esc), service brakes
Front suspension making humming noise all the time while in motion, and vibrstion is felt throughout vehicle, passenger side rear axle seal is leaking causing rotor to smoke. Front driver side caliper piston is jammed.
NHTSA complaint #10971458
Feb 21, 2017suspension, structure
Frame is rusting underneayh to the point where I have had to repair the vehicle control arm which rusted off and broke while driving. My tow hitch mount has rusted off. There are more than 5 spots along the frame where rust has perforated and the frame has visible signs of rot. I had a licensed garage inspect the frame and was told the vehicle is dangerous and that the frame… Read more
Frame is rusting underneayh to the point where I have had to repair the vehicle control arm which rusted off and broke while driving. My tow hitch mount has rusted off. There are more than 5 spots along the frame where rust has perforated and the frame has visible signs of rot. I had a licensed garage inspect the frame and was told the vehicle is dangerous and that the frame should be replaced. I am having continuous problems with the suspension components rusting out.
NHTSA complaint #10956184
Jun 27, 2016suspension, wheels, unknown or other
The entire frame is rusting including the rear differential, suspension and other structural component. The dealer sprayed on a liquid tar but now that is falling off with the rust which was sprayed over.
NHTSA complaint #10876808
May 8, 2016steering, suspensionCrash
Me and my family were driving southeast on highway 280 on the far right lane trying to take junction 85 gilroy when all of a sudden through tire on the front driver side came off and the car just was limp on that side and all I can see was sparks and smoke my whole family was terrified .I was trying with all my strength to control the car and with the will of god I managed to… Read more
Me and my family were driving southeast on highway 280 on the far right lane trying to take junction 85 gilroy when all of a sudden through tire on the front driver side came off and the car just was limp on that side and all I can see was sparks and smoke my whole family was terrified .I was trying with all my strength to control the car and with the will of god I managed to safely stop the car .I step out to see what happened and the tire was stuck under the car and completely of the joint with the brecksame still connected to the tire
NHTSA complaint #10863795
Mar 21, 2016steering, suspension, wheels1 injured
Last week, (3/17/16) my neighbor was taking her three children to school in her 2004 Toyota Sequoia. She was traveling on a new road at approximately 30 MPH when the front end of the vehicle dropped on driver's side. She thought she had a flat tire so she steered to the side of the road. It appears the driver's side, lower ball joint failed (see photos). I called… Read more
Last week, (3/17/16) my neighbor was taking her three children to school in her 2004 Toyota Sequoia. She was traveling on a new road at approximately 30 MPH when the front end of the vehicle dropped on driver's side. She thought she had a flat tire so she steered to the side of the road. It appears the driver's side, lower ball joint failed (see photos). I called hendrick Toyota of apex, nc and talked with mr. John specht (919-335-1678). He checked the VIN and said the lower ball joints had a recall and were changed on aug. 15, 2007. He also suggested I contact Toyota to request their assistance to cover the cost to repair the vehicle (case no.[xxx]). He advised the vehicle be brought in for the airbag recall too. Vehicle was towed home on a dolly to prevent any damage to the transmission. The vehicle has 215,444 miles and was not used for off-road driving. The vehicle recently passed state inspection with no problems noted about the front end. If the lower ball joints were already replaced in a recall (2007) what did they replace them with, and how did they correct the problem? This failure could have caused a deadly accident at higher speed. When a lower ball joint breaks, the driver can only steer with one wheel.[xxx] 'information redacted pursuant to the freedom of information act (foia), 5 u.s.c. 552(b)(6).' *bf
NHTSA complaint #10850861
Oct 5, 2015suspension
Our situation is virtually the same as many other complaints in your system. Namely that Toyota had our dealer apply undercoat to the frame of our 2004 Sequoia in july of 2013. On sept. 5 this year went to the dealer for an oil change and tire rotation and after waiting a few hours was informed they did not perform the service as the frame was so bad. Knowing that a neighbor… Read more
Our situation is virtually the same as many other complaints in your system. Namely that Toyota had our dealer apply undercoat to the frame of our 2004 Sequoia in july of 2013. On sept. 5 this year went to the dealer for an oil change and tire rotation and after waiting a few hours was informed they did not perform the service as the frame was so bad. Knowing that a neighbor had the same problem and Toyota bought it back I asked about it and was told "that program was over" this is a serious safety issue and upon calling Toyota USA was told they can't do anything. There are numerous complaints similar to this on the nhts website. Why isn't anything being done about this?
NHTSA complaint #10779817
Jul 15, 2015suspensionCrash1 injured
Tl* the contact owned a 2004 Toyota Sequoia. While driving at approximately 40 MPH over a manhole, there was a loud popping sound and the front passenger side wheel folded under the vehicle. As a result, the contact crashed into a ditch on the side of the road. The front passenger sustained injuries to the right knee and required medical attention. A police report was filed.… Read more
Tl* the contact owned a 2004 Toyota Sequoia. While driving at approximately 40 MPH over a manhole, there was a loud popping sound and the front passenger side wheel folded under the vehicle. As a result, the contact crashed into a ditch on the side of the road. The front passenger sustained injuries to the right knee and required medical attention. A police report was filed. The vehicle was destroyed. The manufacturer was made aware of the failure and stated that the VIN was included in NHTSA campaign number: 07v013000 (suspension). The failure mileage was approximately 175,000.
NHTSA complaint #10734248
May 2, 2015suspension, wheels
Made a left hand turn and the control arm broke off from rusted frame while traveling at about ten MPH. Repair center says the vehicle is a total loss, because the frame is not safe, nothing to re-attach control arm to! *tr
NHTSA complaint #10714156
Mar 31, 2015suspension
Tl* the contact owns a 2004 Toyota Sequoia. The contact stated that the rear axle fractured due to corrosion. The contact mentioned that the vehicle was previously repaired under an unknown manufacturer recall related to the failure; however, the failure recurred. The vehicle was taken to the dealer and stated that the rear axle needed to be replaced. The contact took the… Read more
Tl* the contact owns a 2004 Toyota Sequoia. The contact stated that the rear axle fractured due to corrosion. The contact mentioned that the vehicle was previously repaired under an unknown manufacturer recall related to the failure; however, the failure recurred. The vehicle was taken to the dealer and stated that the rear axle needed to be replaced. The contact took the vehicle to an independent mechanic, who confirmed that the rear axle fractured due to corrosion that was repaired under the recall. The manufacturer was made aware of the failure. The failure mileage was 70,000. Updated 5/29/15*cn
NHTSA complaint #10702793
Nov 17, 2014suspension, structure
*filed with attorney general of new york* recall was issued on the 2004 Sequoia due to corrosion. On july 25, 2013 we brought our car to the dealership to apply a protective coat and waited a week for the car to be returned to us. We had to return the vehicle, september, 2014, to the dealer with the same problem, the spray was flaking off exposing the rust underneath. … Read more
*filed with attorney general of new york* recall was issued on the 2004 Sequoia due to corrosion. On july 25, 2013 we brought our car to the dealership to apply a protective coat and waited a week for the car to be returned to us. We had to return the vehicle, september, 2014, to the dealer with the same problem, the spray was flaking off exposing the rust underneath. The vehicle was sprayed for the second time in one day and that time we were told the vehicle's rear axle trailing arm mount was almost separated from the rear axle housing due to the corrosion and it was recommended to replace the axle. At that time we asked if this could have been to the recall of the corrosion, flat out we were told no. We then proceed to take the vehicle to our personal mechanic for second opinion, october 27, 2014, and he confirmed the axle is damage and the frame of the vehicle is in such poor condition that it must be first addressed before replacing the axle; he also mentioned to us this is the second Sequoia that he had seen with the same issue, along he told us the second spraying was done incorrectly, it was not cleaned out they just sprayed over the flaking protective coat and the rust. Our mechanic said the vehicle should not be used because it is not safe and he is willing to sign an affidavit if necessary.
NHTSA complaint #10658579
Jul 8, 2014suspension, electronic stability control (esc)
Vsc trac light and trac off lights on. Also service engine light on. Won't shut off. Brake light also comes on and then off for no reason. I see on complaint list this is issue for many years but Toyota refuses to recall vehicles. Maybe not enough injuries or deaths or law suits yet. Not a good way Toyota treats customers. Toyota should recall and fix vehicles that have… Read more
Vsc trac light and trac off lights on. Also service engine light on. Won't shut off. Brake light also comes on and then off for no reason. I see on complaint list this is issue for many years but Toyota refuses to recall vehicles. Maybe not enough injuries or deaths or law suits yet. Not a good way Toyota treats customers. Toyota should recall and fix vehicles that have built in - designed in defects. Very disappointing. Also a couple years ago the front ball joint broke...luckily driving slowly and not on the highway. *js
NHTSA complaint #10608890
Jun 16, 2014suspension, structure
We had a voluntary recall on our Sequoia, we took it to the dealership in wilkesboro nc and they took pictures and sent the Toyota and said we would be safe driving it in march of 2014. That was wrong on may 18th the sway bar ripped from the frame causing Toyota to have to come get it on a roll back and I have been stuck in a small car with three kids 13, 8, & 3 since that… Read more
We had a voluntary recall on our Sequoia, we took it to the dealership in wilkesboro nc and they took pictures and sent the Toyota and said we would be safe driving it in march of 2014. That was wrong on may 18th the sway bar ripped from the frame causing Toyota to have to come get it on a roll back and I have been stuck in a small car with three kids 13, 8, & 3 since that date. I personally do not feel safe in the car either as of course they sent me in it. I would like for Toyota to send out a apology to others as well as myself for sending vehicles out with a frame that wouldn't last. My Sequoia is in great condition other than the frame with 116,500 miles on it. I have dealt with corporate as if my husband who was with me wouldn't have been it could have caused a major incident as I am on the road constantly and on interstates. I have lost two children due to stillbirths and I don't fill like Toyota cares about it's customers and their lives. *tr
NHTSA complaint #10598528
Mar 17, 2014suspension, structure
Tl* the contact owns a 2004 Toyota Sequoia. The contact stated while having the vehicle serviced at a dealer, the technician noticed excessive rust on the frame and suspension. The technician also stated that the vehicle was unsafe to drive. The contact mentioned that the vehicle was included in a manufacturer's recall but the dealer was charging for parts because there was a… Read more
Tl* the contact owns a 2004 Toyota Sequoia. The contact stated while having the vehicle serviced at a dealer, the technician noticed excessive rust on the frame and suspension. The technician also stated that the vehicle was unsafe to drive. The contact mentioned that the vehicle was included in a manufacturer's recall but the dealer was charging for parts because there was a possibility that the part could have fractured during the remedy repair. The contact notified the manufacturer of the failure. The vehicle was not repaired. The approximate failure and current mileage was 132,000.
NHTSA complaint #10572746
Jan 5, 2012steering, suspension, wheelsCrash2 injured
Was driving my 2004 Toyota Sequoia at 35-40mphin heavy traffic when there was a loud bang, a drop in the front left of the truck and the sound of metal scrapping the pavement. I turned the wheel to the right and hit the brakes to avoid going over the median into on coming traffic. I then skidded across 2 lanes of traffic and hit a car trying to enter the parkway. An… Read more
Was driving my 2004 Toyota Sequoia at 35-40mphin heavy traffic when there was a loud bang, a drop in the front left of the truck and the sound of metal scrapping the pavement. I turned the wheel to the right and hit the brakes to avoid going over the median into on coming traffic. I then skidded across 2 lanes of traffic and hit a car trying to enter the parkway. An eyewitness said he saw the wheel come dislodged for no reason. Luckily the lady who was in the other car only had minor injuries and other than a so far minor case of whip lash everyone is ok. Upon inspecting the vehicle with the police officer it looked as if the wheel and axle were ripped fron the truck. Unfortunately the Sequoia gave me no indications of anything going wrong or I would have taken it to the shop. *tr
NHTSA complaint #10442592
Oct 20, 2010suspension1 injured
2004 Toyota Sequoia. Attorney requests information for a case *tgw the attorney stated his client suffered back injuries requiring spinal surgery as a result of a defective ball joint.
NHTSA complaint #10360904
Dec 26, 2006steering, suspensionCrash3 injured
Friday, december 22, 2006, while driving I experienced a swift pull to the driver's left, corrected it then seconds, later the vehicle gave a violent jerk, accompanied by a horrific sound of steel scraping with the smell of burning metal. The vehicle veered toward traffic in the opposite direction so I fought to hold the stirring from turning in to oncoming traffic or rolling… Read more
Friday, december 22, 2006, while driving I experienced a swift pull to the driver's left, corrected it then seconds, later the vehicle gave a violent jerk, accompanied by a horrific sound of steel scraping with the smell of burning metal. The vehicle veered toward traffic in the opposite direction so I fought to hold the stirring from turning in to oncoming traffic or rolling off the road down the side of the freeway. My children scream and cried hysterically as they watched and experience our vehicle violently thrashed about. Smoked and sparks bellowed up along the passenger and front sides of the vehicle. I got the vehicle to the side off the road, out of traffic inches from a 20' (twenty-foot) drop off. The vehicle came to rest on the wheel which had separated from the vehicle causing the driver (me) to loose steering control therefore ending in the most terrifying experience for my children and myself as well as a near traffic collision. Vehicle was towed to Toyota of el cajon. They called and said the vehicle has approx $3900 in damages. He said the arm broke and the wheel separated from the vehicle. He assured me he had even look for recalls on the vehicle and there were none. He explained the vehicle had 109,000 (one-hundred-thousand) miles and this was just one of those things. I told him I not agree because I once owned a rav 4 with 364,000 (three-hundred-sixty-four-thousand) miles and never experienced such. The Sequoia was purchased new may of 2004, irregardless
NHTSA complaint #10177000
May 19, 2006suspensionCrash
I have a 2005 Toyota Sequoia 4wd sr5 edition, I was driving through a neighborhood approximately 30 MPH, when the right front end of the vehicle collapsed onto the pavement. Steering and braking power was lost as the car skid approximately 75 yards to a stop. On exiting the car and observation, the right front wheel, suspension, and axel assembly had separated from the car. … Read more
I have a 2005 Toyota Sequoia 4wd sr5 edition, I was driving through a neighborhood approximately 30 MPH, when the right front end of the vehicle collapsed onto the pavement. Steering and braking power was lost as the car skid approximately 75 yards to a stop. On exiting the car and observation, the right front wheel, suspension, and axel assembly had separated from the car. My wife called a tow truck and brought our camera. The following day the local Toyota dealership arranged a tow, and I subsequently discovered that a recall had been issued for 02,03, and some 04 seqouias. Details here: http://lemon.onecle.com/content/05v225000-Toyota-Sequoia-2004.html essentially, a defect was discovered in the lower ball joint which could lead to separation. When I asked the dealership why I was not notified of the recall, they told me that my VIN number was several thousand units in production past when the recall and defect was discovered, and that they believed my vehicle was safe. The vehicle was towed to the dealership, and the problem was identified as a defect and separation of the lower ball joint, the dealership left me a message to this effect. They subsequently notified Toyota who inspected and replaced the assembly, both left and right. They have not offered a satisfying statement on why the car was not recalled, and why the wear was not identified in the last several services I have had performed at the dealership. This accident could have cost me, my wif
NHTSA complaint #10157857
Jan 22, 2005suspensionCrash
New 2004 Toyota Sequoia leased on 8/8/04 with 78 odometer miles, sustained damages to the front passenger-side steering arm at about 2,379 miles at 7:30 a.m. On 11/5/04 in plantation, florida, and immediate/complete separation of passenger-side front wheel. At the time of the incident, the asphalt-paved roadway was free of any abnormal conditions, and the weather was clear.… Read more
New 2004 Toyota Sequoia leased on 8/8/04 with 78 odometer miles, sustained damages to the front passenger-side steering arm at about 2,379 miles at 7:30 a.m. On 11/5/04 in plantation, florida, and immediate/complete separation of passenger-side front wheel. At the time of the incident, the asphalt-paved roadway was free of any abnormal conditions, and the weather was clear. The vehicle had been in motion for only a few feet after a full stop, seconds before the breakdown. Except for body damages resulting from the 5,000-lb vehicle falling on the road after the wheel separation, there is no damage that would suggest that the breakdown was the result of a collision. Police arrived at the scene, and did not write a report. The vehicle was towed to maroone Toyota dealership at about 10:30 a.m. On 11/5/04, where it remains in disrepair. *jb
NHTSA complaint #10107731