The rear control arm broke while I was driving causing me to swerve uncontrollably and almost causing a collision
2005 Toyota 4Runner steering problems
27 owners reported steering problems — 7% of all 410 complaints about the 2005 Toyota 4Runner.
Steering complaints by Toyota 4Runner year
What owners report
The frame broke loose from the rear sway bar due to excessive rust while I was driving it. My 4Runner is an 05 and has the same frame as the tacomas of the same year, except with no recall. I believe it is wrong to recall the tacoma frame and not the same 4Runner frame. It is available for inspection. The car wanted to loose control anytime the accelerator was pressed or… Read more
The frame broke loose from the rear sway bar due to excessive rust while I was driving it. My 4Runner is an 05 and has the same frame as the tacomas of the same year, except with no recall. I believe it is wrong to recall the tacoma frame and not the same 4Runner frame. It is available for inspection. The car wanted to loose control anytime the accelerator was pressed or released. The problem has been an issue for many 4Runner owners of similar years. There was no warning to this occurrence.
Upon recent inspection of my vehicle, it was noted that the frame is severely corroded and rusted to the point where collapse or breaking of the frame is possible while driving. Apprently the frame was not properly treated for rust protection and can now be unsafe for driving. Enclosed are pictures of the rusted frame.
When turning to park get message driving assist disabled drive with care and the dash loser power can’t turn steering. Power steering shuts off this has happens multiple times had battery check out alternator every show good. Have research online other people having same issue.
Upon recently driving a family member's 2005 Toyota 4Runner limited v8, I heard a knocking noise coming from the front of the vehicle over bumps. Upon inspecting the vehicle, I discovered extensive rust on nearly every single part of the structural frame, suspension components and even exhaust system. Some parts are so badly rusted that they can be punctured by simply pushing… Read more
Upon recently driving a family member's 2005 Toyota 4Runner limited v8, I heard a knocking noise coming from the front of the vehicle over bumps. Upon inspecting the vehicle, I discovered extensive rust on nearly every single part of the structural frame, suspension components and even exhaust system. Some parts are so badly rusted that they can be punctured by simply pushing your finger through them (including the rear frame cross member crash structure behind the rear bumper). These vehicles are rusting so terribly that I'm shocked NHTSA hasn't forced Toyota to recall them. Yes, they're older, but the level of rust and decay is unprecedented for nearly any modern car. Toyota already had to recall all of their other body-on-frame vehicles (tacoma, tundra, sequoia, and land cruiser) to replace the frames due to rust. Why have they neglected the 4Runner when it's arguably the vehicle that will likely see use off road more than all the others? The NHTSA should force Toyota to recall these cars before someone is killed. Look at any online forum as I did last night and you'll see Toyota is actually being sued in a class action lawsuit for this very issue. Tons of people are sharing photos and stories of their own incidents. Someone is going to be killed when their car disintegrates as they drive down the road and they lose control of their steering, braking or if they're hit in a collision and the structural members of the car crumble like a cracker.
The frame underneath the front bumper is totally rusted and crumbling. My mechanic showed me yesterday and said the radiator would fall out. Also the control arrms to the front two wheels are very badly rusted.
Excessive underbody rust, rusting frame joints, and rotting frame members from the inside out.
Vehicle has very excessive frame rust. Holes throughout entire frame making the vehicle unsafe to drive. Rusting from the inside out due to negligence on toyotas part. This vehicle has the same exact frame that was recalled on the tacomas, tundras and sequoias. Please tell me why the 4Runner was left out?
Vehicle is unsafe to drive due to frame corrosion,also steering going out
My 4 runner has extreme frame corrosion due to poor quality. The vehicle is now suffering numerous safety issues as a result. The frame is not repairable and the vehicle is unsafe to drive. It has less than 100,000 miles. The vehicle will not pass state inspection.
Extensive body frame rust.large rusted out holes in frame. Unable to get ma. Vehicle yearly inspection sticker. Emissions test failed (ma. Inspection station #pb004755). Vehicle bought new 6/2005 recommended not to drive vehicle due to extensive holes in frame.
Severe frame and front end rust, vehicle well taken care of> should have been part of tacoma recall!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
This vehicle has a very rusty frame. It does not pass state of maine inspection. Like many other 4runners it suffers from Toyota's faulty frames. This truck has not fallen apart and crashed like many similar units. This one has a perforated frame, and doesn't pass inspection. With 80,000 miles the truck is like new except for the faulty frame. The rust multiplies sitting… Read more
This vehicle has a very rusty frame. It does not pass state of maine inspection. Like many other 4runners it suffers from Toyota's faulty frames. This truck has not fallen apart and crashed like many similar units. This one has a perforated frame, and doesn't pass inspection. With 80,000 miles the truck is like new except for the faulty frame. The rust multiplies sitting still or traveling. The frame is so thin in so many places, there isn't place to make satisfactory repairs.
The frame of the vehicle is rusted, the rust integrity may result in a steering failure.
Severe frame rust to the point of holes. The frame integrity will soon be compromised; if not already. Two rear body mounts are rusting away, the bottom of both mounts is non existent. One mid mount, the sheet metal side is nearly rusted through. One front mount area is rusted away on the sheet metal side. The gas tank is currently only held in place by what is left of the protection shield under the tank .
Steering column rusted through. Hard to turn, when turning wheel it goes from smooth(normal) then grabby. I almost flipped my vehicle when turning off of mass avenue in somerville. If I was driving any fast I would have rolled. I don't know if any wheels came off the ground, but it was close.