CarProblemsDB

2010 Subaru Outback brakes problems

40 owners reported brakes problems — 11% of all 360 complaints about the 2010 Subaru Outback.

Brakes complaints by Subaru Outback year

20261
20257
20244
20237
202211
20218
202016
201922
201818
201725
201618
201528
201423
201331
201240
201178
201040
20098
200831
20078
200620
200532
20043
20037
200231
200131
200012

What owners report

Mar 12, 2026electrical system, service brakes, engine
This car is a very well-maintained, low-use vehicle with regular oil changes and routine maintenance performed on schedule. Early in this drive, I noticed an unusual hissing sound as I approached a stop. When I tried to brake, I realized my brakes didn't seem to be responding. I pressed the brake pedal harder and realized that with 50-100 pounds of pressure (guess), I could… Read more

This car is a very well-maintained, low-use vehicle with regular oil changes and routine maintenance performed on schedule. Early in this drive, I noticed an unusual hissing sound as I approached a stop. When I tried to brake, I realized my brakes didn't seem to be responding. I pressed the brake pedal harder and realized that with 50-100 pounds of pressure (guess), I could slow the car down. As I came to a stop, the engine died. I restarted the car, and it died again immediately. After the following restart, I realized I could manually keep the rpm up in neutral while at stops, and press with significant force to get the car to stop. Had I not been comfortable two foot driving or understood the issue, this surely would have resulted in a crash of some sort. The car indicated a check engine light, loss of traction control, a flashing brake light, and a flashing cruise control light. I took the car immediately to a local shop where they identified the problem as a vacuum leak at the brake booster. The plastic piece that the hose clamps onto had cracked off, leading to this problem. This make and model does not seem to have a check valve downstream of this component.

NHTSA complaint #11723980
Sep 20, 2025service brakes
On saturday, august 9, 2025, my brakes failed at highway speed. My vehicle's stopping distance was severely increased, forcing me to perform an emergency swerve into the leftmost lane to avoid rear-ending a truck. The maneuver was extremely hazardous, as it occurred in a construction zone with concrete barriers and no shoulder, leaving no safe escape path and endangering… Read more

On saturday, august 9, 2025, my brakes failed at highway speed. My vehicle's stopping distance was severely increased, forcing me to perform an emergency swerve into the leftmost lane to avoid rear-ending a truck. The maneuver was extremely hazardous, as it occurred in a construction zone with concrete barriers and no shoulder, leaving no safe escape path and endangering myself and others. I confirmed the cause was a catastrophic failure of the four-way brake line union block due to severe corrosion. There were no warning lamps or symptoms prior to the incident; the failure was sudden and total. I found that this defect is difficult to spot during inspections because the part is hidden by a plastic panel. The failed union block and corroded lines were removed and are available for inspection upon request. My research shows this is a widespread issue and the exact failure mode covered by Subaru recall wqk-47r for 2005-2009 models. This known safety defect persists in the 2010-2014 generation, which is not covered by the recall. Prohibitive dealer repair costs are forcing unsafe workarounds. This defect presents an unreasonable risk to public safety, and I urge the NHTSA to investigate.

NHTSA complaint #11688669
Jun 2, 2025service brakes
Brake pedal went to the floor while applying the brake. Pulled car back up driveway and parked and noted almost zero ability to brake the car, pedal goes to floor when applying pressure to the pedal, almost zero ability to come to stop. Checked fluid - was still in reservoir but not at max. Level (b/n max and min.). Checked under hood at and no signs of any leaks in engine… Read more

Brake pedal went to the floor while applying the brake. Pulled car back up driveway and parked and noted almost zero ability to brake the car, pedal goes to floor when applying pressure to the pedal, almost zero ability to come to stop. Checked fluid - was still in reservoir but not at max. Level (b/n max and min.). Checked under hood at and no signs of any leaks in engine compartment or on any lines in engine compartment (all good). Looked under car and no signs of leaking. Opened reservoir to top off to max. And by time I went into garage and came back with brake fluid the reservoir was empty, reexamined and found brake fluid leaking from a plastic cover on passenger side rear of car. Placed cover to soak up all fluid dripping/ streaming down to the ground. Called my local mechanic, and he indicated car may need to be towed to be serviced. In looking online, I have found many accounts of this issue with 2010 Subaru Outback owners in northern areas where corrosion at the 4-way connector of the brakes lines causes immediate loss of braking and loss of all fluid. Not sure of cost, but I am thinking once it is examined the 4-way connector and all 4 brake lines may need to be replaced. This appears to be a widely known issue and for some reason this was never included or changed from 2005-2009 Subaru recalls to change for 2010 models, so I would like to know why this and the cost for repairs are not covered by Subaru as a recall. This could have caused a major accide

NHTSA complaint #11664459
Apr 8, 2025service brakes, hydraulic
The contact owns a 2010 Subaru Outback. The contact stated while driving at 5 MPH, the brake pedal was depressed and failed to respond. The brake warning light was illuminated. The contact attempted to contact the manufacturer and was informed that the vehicle would not be covered under a recall. The vehicle was then taken to an independent mechanic who diagnosed the vehicle… Read more

The contact owns a 2010 Subaru Outback. The contact stated while driving at 5 MPH, the brake pedal was depressed and failed to respond. The brake warning light was illuminated. The contact attempted to contact the manufacturer and was informed that the vehicle would not be covered under a recall. The vehicle was then taken to an independent mechanic who diagnosed the vehicle with catastrophic brake line failure due to corrosion. The vehicle was repaired. The dealer was not made aware of the failure. The manufacturer was made aware of the failure. The failure mileage was approximately 100,000.

NHTSA complaint #11653417
Feb 2, 2025service brakes
I noticed my brake pedal suddenly sink to the floor, and I have to press the pedal all the way to the bottom to get a little bit of brake. Was able to make it back home. Upon inspection, I noticed brake fluid dripping from rear passenger side brake pipe, I took off a plastic cover that covers the brake line, and noticed heavy rust on a "manifold" where two brake lines coming… Read more

I noticed my brake pedal suddenly sink to the floor, and I have to press the pedal all the way to the bottom to get a little bit of brake. Was able to make it back home. Upon inspection, I noticed brake fluid dripping from rear passenger side brake pipe, I took off a plastic cover that covers the brake line, and noticed heavy rust on a "manifold" where two brake lines coming from front of the car and two lines going to two side of rear brakes. The brake line is leaking right from there. I feel sudden failure of this part can lead to fatal accident, luckily I was very close to home and on a local road when I experience this. And Subaru should 1. Make it more easy for inspection. 2. Notify the public. 3. Get more rust proof measures, 4. Get it fixed for the current owners. Thanks.

NHTSA complaint #11640199
Feb 1, 2025service brakes
Complete brake failure due to leakage at 4 way b8rake line junction located above the gas tank on right side rear of vehicle. Known and reported issue due to rust and corrosion of brake lines in this unprotected area of vehicle. It has been a known problem on these 4th generation vehicles...no recall instituted. Wife and I lucky to be alive. Ridiculous that Subaru america has… Read more

Complete brake failure due to leakage at 4 way b8rake line junction located above the gas tank on right side rear of vehicle. Known and reported issue due to rust and corrosion of brake lines in this unprotected area of vehicle. It has been a known problem on these 4th generation vehicles...no recall instituted. Wife and I lucky to be alive. Ridiculous that Subaru america has not been summoned to conform to a nthsa recall and make repairs on those vehicles affected. Absolutely no indication failure was about to occur resulting in complete brake failure. Amazingly, this happened in such an area where I was able to roll to a stop and take action to transport the vehicle to my home where it is officially grounded in my garage. Condition was confirmed by a Subaru master technician.

NHTSA complaint #11640122
Sep 20, 2024service brakes
The brake system failed when the brake lines burst at the four way connector on the right, rear side of the vehicle. There were no indicator lights lit on the dash until after losing all braking. Luckily I was traveling slowly and was able to roll to a stop safely. This is due to corrosion on the brake lines in the area of the four way connector. There is a small inspection… Read more

The brake system failed when the brake lines burst at the four way connector on the right, rear side of the vehicle. There were no indicator lights lit on the dash until after losing all braking. Luckily I was traveling slowly and was able to roll to a stop safely. This is due to corrosion on the brake lines in the area of the four way connector. There is a small inspection door on the cover for this connector, so the issue is easily seen. This has been an issue for subarus in the past with many recalls for this issue on similar models. Unfortunately the recalls end in 2009 for outbacks while mine is a 2010. Obviously this issue has not been corrected by the manufacturer.

NHTSA complaint #11615546
Jun 20, 2024service brakes

Brake failure - after inspecting vehicle 6/20/2024 noted brake fluid leaking from underneath the vehicles right hand side. Removed splash guard and noticed the brake lines had extensive corrosion in a small section with no protective coating. Brake fluid noted leaking from the unprotected area. The rest of the brake lines were fully intact.

NHTSA complaint #11595552
Aug 10, 2023service brakes

Brake line corrosion, I noticed it about 10 months after buying the car. They finally broke five days ago I called Subaru. They told me it’s just regular wear and tear and there is no recall for the corroded brake lines and the junction box.

NHTSA complaint #11537594
Jun 18, 2023service brakes
The brakes completely gave out while the vehicle was being driven, without warning. The brake light did not turn on until after the car had been stopped and restarted and the brakes had already gone out. Fortunately, the vehicle was being driven on a side street, and it was able to coast into a parking lot. Had the brakes given out before then, when it was on the highway, the… Read more

The brakes completely gave out while the vehicle was being driven, without warning. The brake light did not turn on until after the car had been stopped and restarted and the brakes had already gone out. Fortunately, the vehicle was being driven on a side street, and it was able to coast into a parking lot. Had the brakes given out before then, when it was on the highway, the outcome could have been far worse. The vehicle was towed to a mechanic. The mechanic stated that once they removed the cover over the rear junction box near the fuel tank, they found the junction box to be corroded away. The vehicle has been to several mechanics over the past several years, and none of them have ever identified any issues with the brakes or brake lines. Subaru had issued a recall for the same issue but for model years 05 to 09.

NHTSA complaint #11527618
Jul 26, 2022service brakes

I have a 2010 Subaru Outback that has significant corrosion on the rear four-way brake joint connector that can lead to a serious accident. There was a campaign that addressed this very issue (NHTSA id: 14v-311) but it did not include 2010 Outback even though it had the same design. This issue is very serious.

NHTSA complaint #11476025
Nov 17, 2021service brakes
Failure of rear hydraulic braking system (brake lines) due to corrosion. Steady loss of fluid due to corrosion around the double brake line union underneath rear passenger side. Plastic cover prevents corrosion issues from being spotted prior to it becoming a catastrophic failure. Vehicle has been inspected by a service center. The "brake" warning lamp illuminated in the… Read more

Failure of rear hydraulic braking system (brake lines) due to corrosion. Steady loss of fluid due to corrosion around the double brake line union underneath rear passenger side. Plastic cover prevents corrosion issues from being spotted prior to it becoming a catastrophic failure. Vehicle has been inspected by a service center. The "brake" warning lamp illuminated in the dash to alert the drivers of a possible problem, but a significant amount of fluid was lost.

NHTSA complaint #11440801
Jul 27, 2021service brakes

The ABS system failed at 117k miles and rendered the ABS inoperative. The electronic parking brake recall could not be completed because of this. We were quoted $1600 to replace the ABS pump and computer so that the recall could be completed. The vehicle was dangerously difficult to stop and almost caused a crash.

NHTSA complaint #11426621
Apr 15, 2021service brakes

Code c0251 electronic parking brake malfunction/inoperative; sometimes epb will engage when driving at a slow pace <10mph no accidents associated

NHTSA complaint #11408183
Feb 21, 2021service brakes

2010 Subaru Outback. When my wife was entering a 4-way stop, the brake pedal went to the floor. Was able to get home without incident. Upon inspection, found the brake lines at a junction block near the gas tank severely corroded and leaking. Why was this not part of the recall which went from 2005-2009. Car was mfg'd in 2009, about 150000 miles

NHTSA complaint #11397188
Jan 21, 2021electrical system, vehicle speed control, service brakes

Multiple times over the past 6 years I will be driving and if using my cruise it stops working and I have flashing lights , brake and cruise light flashes on and off, check engine and traction control light stay on. These lights stay on from 1 day to almost 2 weeks before they go out. I have had them checked many times by Subaru dealer and other mechanic shops with no resolution except to clear the codes

NHTSA complaint #11389164
Dec 29, 2020service brakes

I lost the brakes going down our steep driveway into the private road. We discovered that the brake fluid reservoir was empty. When my husband removed the plastic fuel tank cover to check for a leak, he discovered that the hard brake lines were heavily corroded right around the brake line junction box, similar to the 2005-2009 outbacks. The car had one owner before us, in massachusetts. We are in maine. .

NHTSA complaint #11385423
Dec 3, 2020service brakesCrash

I went out to start my car and let it warm up. I got in set the electronic parking brake started the car and put the manual transmission in neutral. I went in the house to finish getting ready, when I looked out the window the car was in the ditch at the bottom of the driveway. I had the parking brake recall done in march at the local Subaru dealer

NHTSA complaint #11377704
Nov 22, 2020power train, vehicle speed control, service brakes
11/21/2020 at oil temp light, brake light, and vehicle dynamics control lights come on while driving after around 30 minutes on a major route (not highway) after already being "fixed" by a dealership. At the end of august I brought the car to the dealer because all 3 lights had come on after I had arrived near my place of work. I had driven for 35 minutes on the highway… Read more

11/21/2020 at oil temp light, brake light, and vehicle dynamics control lights come on while driving after around 30 minutes on a major route (not highway) after already being "fixed" by a dealership. At the end of august I brought the car to the dealer because all 3 lights had come on after I had arrived near my place of work. I had driven for 35 minutes on the highway and cruising local streets for a spot when they came on. When I first got back to my vehicle after work (I had parked and was waiting until end of day to deal with it) and turned on my car - no lights. I was nearly home when all 3 came back on (35 mintues of highway driving). Took to dealer that weekend where they replaced engine air filter, cabin air filter, CVT- valve body and brake light switch for $1934.97 on 9/21 the lights came back on after driving for around 20 minutes on a 2 lane route. Dealer had the car for 1 week and all they could find / do was change a brake light bulb.

NHTSA complaint #11375796
Jul 8, 2020service brakes

Rear brake lines are rusted and one off the pipes has busted I now have no brakes. Happened on monday 7/6/2020.

NHTSA complaint #11338305
Mar 13, 2020electrical system, unknown or other, service brakes

While driving the following warning lights have come on: brake, vehicle dynamics control, and at oil temp. It has happened twice now and lights go away once car is turned off and back on again.

NHTSA complaint #11317822
Nov 14, 2019service brakes
Tl* the contact owns a 2010 Subaru Outback. While driving 5 MPH, the brake pedal was depressed, but the vehicle failed to respond. The brake pedal traveled to the floorboard without warning. The contact called white river Subaru (429 sykes mountain ave, white river junction, vt 05001, (802) 526-9810). The vehicle was not diagnosed or repaired. The manufacturer was contacted… Read more

Tl* the contact owns a 2010 Subaru Outback. While driving 5 MPH, the brake pedal was depressed, but the vehicle failed to respond. The brake pedal traveled to the floorboard without warning. The contact called white river Subaru (429 sykes mountain ave, white river junction, vt 05001, (802) 526-9810). The vehicle was not diagnosed or repaired. The manufacturer was contacted and provided case number: 1-50024654201. The contact stated that the failure was similar to NHTSA campaign number: 14v311000 (service brakes, hydraulic). The failure mileage was 190,000.

NHTSA complaint #11279984
Jul 20, 2019vehicle speed control, electronic stability control (esc), service brakes
While driving the check engine, cruise control, ABS, and vehicle dynamics control lights all came on. I later learned that a bad o2 sensor was the cause. It was raining and when I applied the brakes moderately firmly due to another car stopping hard in front of me, my car's brakes locked up and I slid on the wet pavement. Fortunately no accident occurred. After replacing the… Read more

While driving the check engine, cruise control, ABS, and vehicle dynamics control lights all came on. I later learned that a bad o2 sensor was the cause. It was raining and when I applied the brakes moderately firmly due to another car stopping hard in front of me, my car's brakes locked up and I slid on the wet pavement. Fortunately no accident occurred. After replacing the 02 sensor, the lights went off. Weeks later the same lights came on again due to what turned out to be a bad gas cap. When it was replaced, the lights went out. Now the other 02 sensor is intermittently going out, and it triggers the same lights. However I have been very surprised to learn that when these lights are on, those systems are disabled. It is astounding that safety is intentionally removed from a car due to a loose gas cap or bad 02 sensor.

NHTSA complaint #11233607
Apr 7, 2019service brakes, engine

When coming to a stop on any road the vehicle stalls, uphill or downhill. The car then needs to be restarted after putting the vehicle in park then turning the key to restart, as vehicles are coming quickly from behind. This could be a potentially deadly vehicle failure and needs to be addressed and recalled. It started about a week ago and continues to happen.

NHTSA complaint #11194402
Dec 7, 2018service brakes, engine
Tl* the contact owns a 2010 Subaru Outback. While driving various speeds and depressing the brake pedal, the vehicle stalled without warning. The vehicle was able to restart and drive normally, but the failure recurred. The contact stated that the failure occurred intermittently when the brake pedal was depressed. The vehicle was taken to an independent mechanic who diagnosed… Read more

Tl* the contact owns a 2010 Subaru Outback. While driving various speeds and depressing the brake pedal, the vehicle stalled without warning. The vehicle was able to restart and drive normally, but the failure recurred. The contact stated that the failure occurred intermittently when the brake pedal was depressed. The vehicle was taken to an independent mechanic who diagnosed that the transmission needed to be replaced. The contact called heritage Subaru catonsville at (844) 224-1954 (located at 6624 baltimore national pike, catonsville, md 21228) and was informed to schedule a diagnostic appointment. The vehicle was not taken to a dealer. The vehicle was not repaired. The manufacturer was not notified of the failure. The approximate failure mileage was 129,204. *dt consumer stated dealer fixed the transmission.*jb

NHTSA complaint #11156857
Nov 29, 2018parking brake, electrical system
Tl* the contact owns a 2010 Subaru Outback. When the contact attempted to disengage the parking brake, the check engine, ABS, traction control, parking brake, and cruise control warning indicators illuminated. The vehicle was taken to landers mclarty Subaru (located at 5790 university dr nw, huntsville, al 35816, (256) 382-2425) where it was diagnosed that the parking brake… Read more

Tl* the contact owns a 2010 Subaru Outback. When the contact attempted to disengage the parking brake, the check engine, ABS, traction control, parking brake, and cruise control warning indicators illuminated. The vehicle was taken to landers mclarty Subaru (located at 5790 university dr nw, huntsville, al 35816, (256) 382-2425) where it was diagnosed that the parking brake failed and needed to be replaced. The vehicle was not repaired due to the repair fees. The manufacturer was notified of the failure and provided case number: 1-38208244231. The approximate failure mileage was 150,000.

NHTSA complaint #11154801
Nov 19, 2018power train, service brakes

Electric parking brake closed during repair of vehicle and would not respond to reprogramming or any attempt to repair. Car was stationary, but unable to release brake resulted in necessary replacement of faulty component. Subaru unwilling to reimburse for part.

NHTSA complaint #11152551
Oct 31, 2018power train, service brakesFire
Tl* the contact owns a 2010 Subaru Outback. The contact stated that while driving at 10-15 MPH, there was an abnormal burning odor in the vehicle. Additionally, there was smoke emerging from the hood and into the vehicle. The gear shifter was stuck and failed to engage into first gear. The emergency brake warning light was illuminated. The vehicle was towed to the local dealer… Read more

Tl* the contact owns a 2010 Subaru Outback. The contact stated that while driving at 10-15 MPH, there was an abnormal burning odor in the vehicle. Additionally, there was smoke emerging from the hood and into the vehicle. The gear shifter was stuck and failed to engage into first gear. The emergency brake warning light was illuminated. The vehicle was towed to the local dealer muller Subaru (1350 park ave w, highland park, il 60035 (888) 285-8152) where diagnosed that the clutch needed to be replaced. The vehicle was not repaired. The contact declined to pay for the $1800.00 fee. The manufacturer was contacted and provided case number: 1-373-484-69104 however no further assistance was provided. The contact stated that NHTSA campaign number: 18v626000 (parking brake) was not received. The failure mileage was 83,000.

NHTSA complaint #11144460
Sep 4, 2018service brakes
I was driving about 30 MPH on a country road, attempted to stop, and the brake pedal went all the way to the floor. I was able to use my paddle shifters to slow the car down to a safer speed. After the pedal went to the floor, I noticed that the brake warning light had come on. Luckily I was close to home and was able to limp the car back home where the car has sat unable to… Read more

I was driving about 30 MPH on a country road, attempted to stop, and the brake pedal went all the way to the floor. I was able to use my paddle shifters to slow the car down to a safer speed. After the pedal went to the floor, I noticed that the brake warning light had come on. Luckily I was close to home and was able to limp the car back home where the car has sat unable to be driven. There is an outstanding recall (Subaru #214790, NHTSA# 14v311000) for 05-09 Outback models. Although my VIN says it's a 2010, it takes 2009 brake pads (2010 pads weren't even close) so I suspect it's an early 2010 model with some 2009 parts- specifically the braking system. Our household has had this problem fixed on 5 different subarus (92 Outback, 95 Outback, 98 Outback, 02 Outback, 09 legacy) so we are well aware of the problem. This failed in exactly the same spot photos attached of the blown brake lines. I contacted my dealer the day it happened and they said there are no open recalls for this for my model year- even after I explained the different size brake pads. They suggested I contact Subaru america- which I did on sept 4. They said the same thing as the dealer, suggested I call Subaru corporate (they were closed) but cautioned me that they wouldn't be able to help. I think the recall should be extended to include at least the 2010 model. I'm trying the NHTSA because it's a major safety problem that occurs without warning. The next person this happens to may not be so lucky.

NHTSA complaint #11124423
Aug 17, 2018service brakes
Tl* the contact owns a 2010 Subaru Outback. While driving 35 to 40 MPH and attempting to slow down, the brake pedal became soft and stuck to the floorboard. The contact was able to come to a complete stop by depressing the brake pedal lightly. The contact also mentioned that when attempting to engage the emergency brake, it only emitted a beeping sound and failed to engage.… Read more

Tl* the contact owns a 2010 Subaru Outback. While driving 35 to 40 MPH and attempting to slow down, the brake pedal became soft and stuck to the floorboard. The contact was able to come to a complete stop by depressing the brake pedal lightly. The contact also mentioned that when attempting to engage the emergency brake, it only emitted a beeping sound and failed to engage. The vehicle was taken to european car sales and service (201 west cloverland drive, ironwood, michigan 49938, (906) 932-5720) where it was diagnosed that the brake lines were rusted and the rear and front brake junctions were corroded. The manufacturer provided the contact with case number 1-35365382991. The manufacturer stated that the brake failure repair ended in march of 2009. The vehicle was not repaired. The failure mileage was 148,000.

NHTSA complaint #11120635
Aug 15, 2017power train, service brakes
While driving at low speed on local roads the parking brake lights starts flashing, the transmission oil temperature light went on and there was a high pitched squealing sound. We could not get the brake light to go off by pulling the brake release lever. It cleared itself the next day. The dealer couldn't reproduce the problem but found a brake switch failure. There were… Read more

While driving at low speed on local roads the parking brake lights starts flashing, the transmission oil temperature light went on and there was a high pitched squealing sound. We could not get the brake light to go off by pulling the brake release lever. It cleared itself the next day. The dealer couldn't reproduce the problem but found a brake switch failure. There were also 2 software updates that were related to the brake and transmission safety and operation. We were charged for all 3 even though it should have been a safety recall.

NHTSA complaint #11015309
Jul 12, 2017service brakes
The vehicle was in neutral, engine running with parking brake set (electronic parking brake in the 2010), the mechanic got out of the car on the level crushed gravel parking lot in the middle of a beautiful sunny afternoon and allowed myself to get in the drivers seat. I have never been able to disengage the parking brake without it flashing non stop unless I turned the car… Read more

The vehicle was in neutral, engine running with parking brake set (electronic parking brake in the 2010), the mechanic got out of the car on the level crushed gravel parking lot in the middle of a beautiful sunny afternoon and allowed myself to get in the drivers seat. I have never been able to disengage the parking brake without it flashing non stop unless I turned the car off and restarted it, then disengage the parking brake. On this specific day, I got into my vehicle attempted to disengage the parking brake it still was set with light on. I turned off the vehicle, restarted it and disengaged the parking brake and it immediately started flashing. The brake was disengaged; however, the light remained on. Returned it to my mechanic and he stated that he was not familiar with the electronic parking brake however, it was not working at all nor would it would work. You could hear the little motor running but nothing would happen. I brought my vehicle up to a Subaru dealership in hopes that they would stand behind a poorly designed piece of equipment on their product which as a consumer should have lasted more than 7 years. I was told the parking brake module part needs to be ordered for $800 plus tax. This is very discouraging given th ridiculous cost of something your vehicle is required to have for state inspection. It seems obvious that this electronic parking brake was not a good product as they only placed them on 2010-2012. I feel that this is something the ma

NHTSA complaint #11004838
Mar 16, 2017suspension, unknown or other, service brakes

Model year has under sized brakes for the vehicle weight,( rotors quickly warp ) #2 in the absence of surface rust, front sub frame rotting away. Got rid of car after just installing new set michellin tires, brakes, rotors and detailing. Had I known!!! How discovered; stationary, looking for source of strange noise under neath upon stoping and starting in traffic.

NHTSA complaint #10966299
Mar 14, 2017unknown or other, service brakes
I bought my first Subaru in 2002. I love it, a week after I bought it I went to california from st. Louis, mo. I decided I wanted another one because I love Subaru's. It took me a few weeks to find the one I wanted. It was a used 2010 with 84,940 miles with one owner. None smoker which I really loved. He took very good care of it. He took it in for all the requirements that… Read more

I bought my first Subaru in 2002. I love it, a week after I bought it I went to california from st. Louis, mo. I decided I wanted another one because I love Subaru's. It took me a few weeks to find the one I wanted. It was a used 2010 with 84,940 miles with one owner. None smoker which I really loved. He took very good care of it. He took it in for all the requirements that Subaru has. I had car fax print out so I know what was done. No complaints about the stalling when you stepped on the brakes. It was about a week into my ownership that I noticed when I stopped the car would start to vibrate and then die. This is very scary because the person behind you starts honking and I must put it into park and restart it. The lights on the dash start flashing while it is dying, a light goes on that looks like a car skidding. When I start to feel, it trying to die I tap on the brakes a few times and most of the time it will keep running. It is the times when it dies and I can't get it started fast enough can be dangers' because someone is driving fast behind me. This has happened to me more than I want it to. When I go to church that is 10 miles away it seems to stop a lot at the light. I just want Subaru to fix the problem because they have known about this problem since 2010. I have found so many complaints on another site, I copied them and will be taking them to my service man and sending a letter to the hq. I just don't know what to do. When I had my car in for the 90,000-mile wo

NHTSA complaint #10965973
Sep 13, 2016service brakes

The brake pipes corroded in the same location as in the earlier recall at the 4 connection coupling where the center pipe meets the rear pipe sections. This issue is documented in Subaru ticket number 1-176 88494776.

NHTSA complaint #10906003
Sep 18, 2014vehicle speed control, service brakes, engineCrash

As I was pulling into a parking space with a foot to go, going less than 5 MPH, the engine surged and the car suddenly lunged forward, climbed a 6 inch curb and traveled about 4 feet and hit a wooden staircase of a building. The entire time my foot was on the brake. This entire event took less than a second. *tr

NHTSA complaint #10637349
← All 2010 Subaru Outback problems & recalls