CarProblemsDB

2008 Subaru Impreza transmission problems

59 owners reported transmission & powertrain problems — 34% of all 176 complaints about the 2008 Subaru Impreza.

Transmission & powertrain complaints by Subaru Impreza year

20252
20242
20224
20211
20194
20185
20175
201613
201511
20149
201323
201226
20116
20105
200930
200859
20078
20067
20055
20049
20031
200225
200010

What owners report

Sep 13, 2023power train

2008 wrx started to make a sqeeking noise when engaging the clutch. The spot welds came apart from firewall and my clutch has gone out twice. The pedal when shifting sticks and while driving I have to put the pedal under my foot and pull upwards for it to work. Very dangerous and the welds are faulty, it should be a recall items. Subaru can request for a inspection anytime as it is very much needed to be addressed.

NHTSA complaint #11544256
Feb 20, 2020power train, structure
The spot welds under windshield cowl broke causing the bracket holding clutch pedal assembly to break. Because of these issues, I can only engage my reverse gear half the time and while shifting gears in motion, it tends to be a bit difficult. I've almost crashed a couple times because of this issue. My car is a 2008 Subaru wrx sedan with only 74,000 miles and I'm currently… Read more

The spot welds under windshield cowl broke causing the bracket holding clutch pedal assembly to break. Because of these issues, I can only engage my reverse gear half the time and while shifting gears in motion, it tends to be a bit difficult. I've almost crashed a couple times because of this issue. My car is a 2008 Subaru wrx sedan with only 74,000 miles and I'm currently making payments on the car. Money is really tight due to me being a full time college student and full time worker so I'm not sure how to go about this really big problem. My car is everything to me right now and if it fails on me, I have no means of transportation. I also have no modifications to the vehicle other than wheels, and a blow off valve. The vehicle tends to give me the most difficulty engaging reverse every morning.

NHTSA complaint #11310395
Feb 19, 2019power train
Tl* the contact owns a 2008 Subaru Impreza. The contact stated that the clutch pedal became very wobbly and almost detached. The contact stated that the manufacturer sent him a technical service bulletin extending the clutch attachment component; however, the dealer (Subaru superstore of chandler, 1050 gilbert rd, chandler, az 85286) never had the parts to repair the vehicle.… Read more

Tl* the contact owns a 2008 Subaru Impreza. The contact stated that the clutch pedal became very wobbly and almost detached. The contact stated that the manufacturer sent him a technical service bulletin extending the clutch attachment component; however, the dealer (Subaru superstore of chandler, 1050 gilbert rd, chandler, az 85286) never had the parts to repair the vehicle. The manufacturer was notified of the failure. The vehicle was not diagnosed or repaired. The approximate failure mileage was 124,000. The VIN was unknown.

NHTSA complaint #11181097
Dec 11, 2018power train
My sons vehicle started off with a squeaking noise when he depressed the clutch. This went on for a couple of months he is now having difficulty shifting the car into gear and it nearly caused an accident the other day. When the vehicle is stationary, and the clutch is totally depressed it is extremely difficult to get the car into gear. When driving it is less difficult,… Read more

My sons vehicle started off with a squeaking noise when he depressed the clutch. This went on for a couple of months he is now having difficulty shifting the car into gear and it nearly caused an accident the other day. When the vehicle is stationary, and the clutch is totally depressed it is extremely difficult to get the car into gear. When driving it is less difficult, but still very tricky to get into gear. We also noticed that when the clutch is depressed, if you raise the hood, you can see the firewall flexing quite a bit where the clutch master cylinder is located. We replaced the clutch slave cylinder and it did not help the issue. In my reading online, I have noticed many complaints from people related to the factory welds holding the clutch assembly to the firewall are failing. It seems to be a widespread issue for Subaru imprezas 2008-2014. I would expect this to be a factory recall. My son can no longer use the car and we are unsure on how to fix the issue. Thank you for your assistance..

NHTSA complaint #11160774
Oct 5, 2018power train, engine

The fire wall broke and the pistons had nothing but problems then it blew the crank

NHTSA complaint #11133481
Sep 17, 2017power train

Having same issue as most with 08 wrx . Firewall brackets have come loose and clutch will not actuate properly.

NHTSA complaint #11023865
Apr 20, 2017power train, service brakes

We had a new clutch installed and the brake pedal and clutch pedal now move together. Simultaneously this not only is a safety issue but has potential to cause premature clutch and brake failure.

NHTSA complaint #10979420
Mar 28, 2017power train
The clutch pedal on my 2008 wrx makes a loud creaking noise every time it's depressed. When I investigated the noise, I noticed that the entire clutch pedal bracket assembly (attached to the forward firewall) shifts approx 1/4 inch every time the clutch pedal is depressed. I found that the three spot welds securing the clutch pedal bracket to the forward firewall were broken.… Read more

The clutch pedal on my 2008 wrx makes a loud creaking noise every time it's depressed. When I investigated the noise, I noticed that the entire clutch pedal bracket assembly (attached to the forward firewall) shifts approx 1/4 inch every time the clutch pedal is depressed. I found that the three spot welds securing the clutch pedal bracket to the forward firewall were broken. From the outside of the firewall, just under the windshield wipers, I saw the spot welds pulling away from the firewall every time the clutch pedal was depressed. This allows the entire clutch pedal bracket assembly to move, causing the creaking noise. If the bracket completely separates from the firewall, the clutch may become completely inoperative - especially dangerous while driving.

NHTSA complaint #10969121
Aug 11, 2016power train
Tl* the contact owns a 2008 Subaru Impreza. While driving at any speed, when the clutch was depressed, it became stuck and made an unknown noise. The vehicle was taken to an independent mechanic where it was diagnosed that the clutch assembly was peeling away from the firewall. The manufacturer was notified and stated that the warranty was extended until november of 2015, but… Read more

Tl* the contact owns a 2008 Subaru Impreza. While driving at any speed, when the clutch was depressed, it became stuck and made an unknown noise. The vehicle was taken to an independent mechanic where it was diagnosed that the clutch assembly was peeling away from the firewall. The manufacturer was notified and stated that the warranty was extended until november of 2015, but could not provide any assistance. The failure mileage was 148,000.

NHTSA complaint #10895094
Sep 4, 2015power train

Tl* the contact owns a 2008 Subaru Impreza. The contact stated that the vehicle was driven by a valet service. When the vehicle was returned, the clutch failed and the pedals moved independently. The vehicle was not taken to the dealer to be diagnosed or repaired. The manufacturer was made aware of the issue. The failure mileage was 62,000.

NHTSA complaint #10761538
Apr 22, 2015power train, structure

Failed welds connecting pedal panel to the firewall. Results in loud squeaking when clutch pedal is depressed/released and the panel welds may fail entirely on my '08 sti. *tr

NHTSA complaint #10712181
Mar 30, 2015power train, engine

Head gasket prematurely leaking oil. Leak finds itself near exhaust. A little bit of research finds that this problem is very common up until 2010 and the introduction of the newest engine. An improved gasket is available, but replacement is very expensive. This is clearly a defective part and the affected cars should be recalled. *tr

NHTSA complaint #10702755
Mar 12, 2015power train

Tl* the contact owns a 2008 Subaru Impreza. While driving at various speeds, the clutch was difficult to engage. The vehicle was taken to a dealer, who diagnosed that the clutch well assembly that was attached to the firewall needed to be replaced. The vehicle was not repaired. The manufacturer was notified of the failure. The approximate failure mileage was 36,800.

NHTSA complaint #10693953
Dec 29, 2014power train, service brakes
I own a 2008 Subaru Impreza wrx with a stock clutch. For approximately 2 years I have been hearing creaking and/or clicking noises when engaging the clutch pedal. In april of 2013 chatham Subaru in ga replaced my clutch due to the metal clutch fork wearing through at the pivot point within the bell-housing. They also noted a very hard clutch pedal and spongy brakes before… Read more

I own a 2008 Subaru Impreza wrx with a stock clutch. For approximately 2 years I have been hearing creaking and/or clicking noises when engaging the clutch pedal. In april of 2013 chatham Subaru in ga replaced my clutch due to the metal clutch fork wearing through at the pivot point within the bell-housing. They also noted a very hard clutch pedal and spongy brakes before the repair. They replaced the clutch, flywheel, pressure plate, fork and master cylinder (I replaced the slave cylinder before I brought it in) all of which I paid for. Initially the clutch felt great (brake feel was unchanged), but has since began to harden again. I began to look online for a solution and found that there are spot welds that break between the firewall and the mounting bracket the clutch pedal assembly is attached to (https://www.google.com/?gws_rd=ssl#q=wrx+spot+welds). I removed the necessary items to inspect the welds and they did unfortunately fail. *tr

NHTSA complaint #10668724
Dec 26, 2014power train, vehicle speed control

The fire wall is cracked and the welds are broken which is causing my clutch to not disengage properly and the clutch pedal to not function correctly. *tr

NHTSA complaint #10668306
Dec 15, 2014power train, structure

Cpsc:i1490369a. 2008 Subaru Impreza. Consumer stated the welds that hold the clutch bracket to the firewall failed, causing creaking, popping and increased pressure to fully depress the clutch pedal. *ln

NHTSA complaint #10666953
Dec 12, 2014power train, service brakes
Tl* the contact owns a 2008 Subaru Impreza. While driving 50 MPH, the contact depressed the brake pedal and the stopping distance was increased. In addition, the clutch became inoperable. The vehicle was taken to a dealer. The technician diagnosed that the bracket that holds the clutch and brake assembly needed to be re-welded. The vehicle was not repaired. The manufacturer… Read more

Tl* the contact owns a 2008 Subaru Impreza. While driving 50 MPH, the contact depressed the brake pedal and the stopping distance was increased. In addition, the clutch became inoperable. The vehicle was taken to a dealer. The technician diagnosed that the bracket that holds the clutch and brake assembly needed to be re-welded. The vehicle was not repaired. The manufacturer was notified of the failure. The failure mileage was 111,834.

NHTSA complaint #10663836
Nov 10, 2014power train, service brakes

As many others have noted regarding the Subaru Impreza wrx, the welds that connect the clutch to the firewall have been broken. Took it into a local dealer and he said that this was a common problem and that I would need to take it to an auto body shop. *tr

NHTSA complaint #10653827
Aug 23, 2014power train
While getting into gear and switching gears, the clutch pedal was squeaking. The squeaking would come and go. The clutch eventually gave out making the car undriveable. The car was difficult to put into gear at low speeds and experienced a slipping clutch at high speeds. I took it to the dealership and the mechanic discovered that the welds in the firewall were broken which… Read more

While getting into gear and switching gears, the clutch pedal was squeaking. The squeaking would come and go. The clutch eventually gave out making the car undriveable. The car was difficult to put into gear at low speeds and experienced a slipping clutch at high speeds. I took it to the dealership and the mechanic discovered that the welds in the firewall were broken which caused the clutch failure. The mechanic estimated the cost of repairing the welds to be approximately $2,000 and the cost of repairing the clutch and flywheel approximately $1,600. The total approximate cost of the repair would be $3,600 for defective welds in the car's firewall. I have yet to have the car repaired as the dealership is attempting to contact Subaru to find out if they will cover some of the costs of the repairs. *tr

NHTSA complaint #10627785
Aug 8, 2014power train
I have a 2008 wrx and I'm getting the apparent common problem in which the clutch assembly is breaking away from the firewall! I noticed early in the year that I was getting a popping sound when I depressed the clutch pedal. It stopped for a while and then started doing it again. I did some research into what this could possibly be, and I found many complaints about this. I… Read more

I have a 2008 wrx and I'm getting the apparent common problem in which the clutch assembly is breaking away from the firewall! I noticed early in the year that I was getting a popping sound when I depressed the clutch pedal. It stopped for a while and then started doing it again. I did some research into what this could possibly be, and I found many complaints about this. I looked to see if my assembly had been broken, and sure enough it is! This is clearly a safety issue as stated by many others because of the firewall now having holes in it! This needs to be a recall! *tr

NHTSA complaint #10620799
Mar 20, 2014power train, structure
The vehicle developed a crack in the fire wall. Every time I press my clutch pedal there is flexing in the assembly and makes a loud crack/squeak sound. Its a daily driver vehicle so its never been raced or tracked. Due to this fire wall crack (which might be dangerous in fire/accident) my transmission gears and syncros have been worn out due to the clutch not releasing… Read more

The vehicle developed a crack in the fire wall. Every time I press my clutch pedal there is flexing in the assembly and makes a loud crack/squeak sound. Its a daily driver vehicle so its never been raced or tracked. Due to this fire wall crack (which might be dangerous in fire/accident) my transmission gears and syncros have been worn out due to the clutch not releasing properly. I know I am not the only one with this problem, I would hope that Subaru of america will one day make a recall for this terrible problem because I don't think that I should be responsible for a huge defect like this, the vehicle is no longer safe for many reasons and is wearing out my internal components every day. Please help me! *tr

NHTSA complaint #10573865
Feb 19, 2014power train, structure, service brakes
This car was purchased by myself brand new with a few miles on the odometer. The clutch pedal was always stiff and squeaky and two local dealerships reassured me this is normal and nothing to worry about. Since about 50k miles my clutch pedal has been unresponsive and requires constant lubrication and bleeding of clutch master and slave cylinder. When pressing either… Read more

This car was purchased by myself brand new with a few miles on the odometer. The clutch pedal was always stiff and squeaky and two local dealerships reassured me this is normal and nothing to worry about. Since about 50k miles my clutch pedal has been unresponsive and requires constant lubrication and bleeding of clutch master and slave cylinder. When pressing either clutch or brake pedal, the other would also move which causes loss of rod travel thus reduced fluid volume to necessary hydraulics. With clutch pedal fully depressed and in gear, the car will roll as if clutch is dragging. With clutch depressed and in gear, the car would lurch forward when turned on. While shifting normally the gears would grind and I'm certain this has worn my synchromesh gears. Dealer continued blaming one part, another part, and my driving habits. They charged me out of pocket for repairs and replacement with no actual progress fixing the issues. Today I stopped by the closest dealership requesting more information on this common clutch pedal assembly to firewall problems. They acknowledged this is an issue and gave me a verbal estimate of at least $900 to fix the broken welds. In my neighborhood I am leaving a stop sign as usual and go to shift into second gear. The clutch pedal linkage broke completely with pedal stuck on the floor. Clutch is now 100% inoperable, luckily I was on a quiet street and this did not break while on the highway. This is a very real safety issue and the

NHTSA complaint #10564998
Jan 20, 2014power train

The welded clutch bracket behind the dash board broke, making my clutch pedal useless and my master cylinder flex forward badly. This is unacceptable. My car is not under warranty anymore and this is a 14 hour labor job. Any other power train related repair would be expected at this mileage, but there should never be a welded bracket that breaks. *tr

NHTSA complaint #10560646
Jan 8, 2014power train
The clutch pedal on my 2008 wrx makes a loud creaking noise every time it's depressed. When I investigated the noise, I noticed that the entire clutch pedal bracket assembly (attached to the forward firewall) shifts approx 1/4 inch every time the clutch pedal is depressed. I found that the three spot welds securing the clutch pedal bracket to the forward firewall were broken.… Read more

The clutch pedal on my 2008 wrx makes a loud creaking noise every time it's depressed. When I investigated the noise, I noticed that the entire clutch pedal bracket assembly (attached to the forward firewall) shifts approx 1/4 inch every time the clutch pedal is depressed. I found that the three spot welds securing the clutch pedal bracket to the forward firewall were broken. From the outside of the firewall, just under the windshield wipers, I saw the spot welds pulling away from the firewall every time the clutch pedal was depressed. This allows the entire clutch pedal bracket assembly to move, causing the creaking noise. If the bracket completely separates from the firewall, the clutch may become completely inoperative - especially dangerous while driving. *tr

NHTSA complaint #10559098
Dec 19, 2013power train

Tl* the contact owns a 2008 Subaru Impreza wrx. The contact stated that when shifting gears, a crackling noise was present. The vehicle was taken to a dealer but was not diagnosed or repaired. The contact notified the manufacturer and no solution was offered. The failure mileage was 70,000.

NHTSA complaint #10556736
Dec 14, 2013power train
Since I have purchased this vehicle brand new with only 85 miles on it. I have been having issues with the clutch being extra tight, and after a month or 2 the clutch kept making a squeaking noise. I have sent it to Subaru many times and they have always stated that the clutch is fine and they did not hear anything. I would like something to be done...it has cost me over… Read more

Since I have purchased this vehicle brand new with only 85 miles on it. I have been having issues with the clutch being extra tight, and after a month or 2 the clutch kept making a squeaking noise. I have sent it to Subaru many times and they have always stated that the clutch is fine and they did not hear anything. I would like something to be done...it has cost me over 5,000.00 to try and fix the problem over the course of 5 years and I still have the same issue as when I first purchased the car. *tr

NHTSA complaint #10556036
Dec 7, 2013power train, service brakes
For several months now on my wife 2008 Subaru Impreza wrx when the clutch is depressed I have heard a cracking/squeaking noise. I brought it to a mechanic and he told me that he sees the firewall flexing when the clutch is beginning to engage. It looks as if the welds on the firewall are cracked and no matter what parts he changes it will not fix the problem that is why it is… Read more

For several months now on my wife 2008 Subaru Impreza wrx when the clutch is depressed I have heard a cracking/squeaking noise. I brought it to a mechanic and he told me that he sees the firewall flexing when the clutch is beginning to engage. It looks as if the welds on the firewall are cracked and no matter what parts he changes it will not fix the problem that is why it is hard to get the car in gear and will eventually break completely. We looked online and this is a common problem with this car, dealerships are changing several parts and nothing will fix this safety issue. This is most definitely a manufacturer issue and should be recalled since it is a major safety concern. *tr

NHTSA complaint #10555166
Nov 20, 2013engine and engine cooling, power train, structure, service brakes
This 2008 Subaru Impreza has been plagued as have many others by a manufacturer chassis defect. The firewall/bulkhead between the driver and engine has 5 spot welds broken which initially are meant to secure the clutch and brake assembly. These weld breaks are a serious safety issue as they are causing difficulty in engaging clutch and brakes, as well as a squeak noise every… Read more

This 2008 Subaru Impreza has been plagued as have many others by a manufacturer chassis defect. The firewall/bulkhead between the driver and engine has 5 spot welds broken which initially are meant to secure the clutch and brake assembly. These weld breaks are a serious safety issue as they are causing difficulty in engaging clutch and brakes, as well as a squeak noise every time the clutch is depressed. As this is not an insignificant wear item but part of the chassis/frame which is a dangerous defect as complete failure during operation of the vehicle can cause catastrophic accidents, further investigation and action on this matter should be taken by the NHTSA. This is certainly a recall issue. *tr

NHTSA complaint #10553101
Nov 16, 2013engine and engine cooling, power train, structure, service brakes
This 2008 Subaru Impreza has been plagued as have many others by a manufacturer chassis defect. The firewall/bulkhead between the driver and engine has 5 spot welds broken which initially are meant to secure the clutch and brake assembly. These weld breaks are a serious safety issue as they are causing difficulty in engaging clutch and brakes, as well as a squeak noise every… Read more

This 2008 Subaru Impreza has been plagued as have many others by a manufacturer chassis defect. The firewall/bulkhead between the driver and engine has 5 spot welds broken which initially are meant to secure the clutch and brake assembly. These weld breaks are a serious safety issue as they are causing difficulty in engaging clutch and brakes, as well as a squeak noise every time the clutch is depressed. As this is not an insignificant wear item but part of the chassis/frame which is a dangerous defect as complete failure during operation of the vehicle can cause catastrophic accidents, further investigation and action on this matter should be taken by the NHTSA. This is certainly a recall issue. *tr

NHTSA complaint #10552586
Oct 28, 2013power train
The weld that holds the bracket for the clutch and brake to the fire wall is cracked. This crack represents a possible safety issue if it should completely fail. Without the bracket being properly attached to the firewall, the brakes and clutch become inoperable. This is a known issue by Subaru and their lack of action shows a carelessness that is putting american… Read more

The weld that holds the bracket for the clutch and brake to the fire wall is cracked. This crack represents a possible safety issue if it should completely fail. Without the bracket being properly attached to the firewall, the brakes and clutch become inoperable. This is a known issue by Subaru and their lack of action shows a carelessness that is putting american consumers at risk. Thank you for your immediate assistance. *tr

NHTSA complaint #10549884
Oct 7, 2013power train

Clutch pedal on 2008 wrx has developed a creaking noise every time it is depressed. Brake pedal shifts forward and to the left upon depression of clutch pedal. This is a reasonably well documented problem of the clutch pedal assembly spot weld joints failing. This is a safety issue that should result in a recall. *tr

NHTSA complaint #10547104
Oct 5, 2013power train, structure
2008 wrx firewall welds are bad. Dealership wrote up "dangerous. Should not drive vehicle" and gave me an approximate price to fix it telling me they've never seen or heard about this before. Forums state this is an ongoing problem since 2008 and many people have attempted to spot weld it in place or have done non-ome fixes. Dealership told me basically corporate won't help… Read more

2008 wrx firewall welds are bad. Dealership wrote up "dangerous. Should not drive vehicle" and gave me an approximate price to fix it telling me they've never seen or heard about this before. Forums state this is an ongoing problem since 2008 and many people have attempted to spot weld it in place or have done non-ome fixes. Dealership told me basically corporate won't help because the car has 137,000 miles on it so its my problem. Car is too dangerous to drive or sell in this shape. I have called the dealership and complained about this problem starting 6 months after I purchased the car new and they always said the same thing "we have no known issues related to what your explaining". 6 years later and now its turned into a dangerous situation where clutch will go while driving. *tr

NHTSA complaint #10546849
Aug 12, 2013power train, structure, fuel/propulsion system
The clutch pedal on my 2008 wrx makes a loud creaking noise every time it's depressed (it will also pop if cold out). After reading other complaints online I found the entire clutch pedal bracket assembly (attached to the forward firewall) shifts approx 1/4 inch every time the clutch pedal is depressed, also causing the brake pedal to flex to the left. I can see at least two… Read more

The clutch pedal on my 2008 wrx makes a loud creaking noise every time it's depressed (it will also pop if cold out). After reading other complaints online I found the entire clutch pedal bracket assembly (attached to the forward firewall) shifts approx 1/4 inch every time the clutch pedal is depressed, also causing the brake pedal to flex to the left. I can see at least two of my three spot welds securing the clutch pedal bracket to the forward firewall are broken. The whole clutch pedal assembly pulls away from the firewall every time the clutch pedal is depressed, the slave cylinder unit visibly moves. This allows the entire clutch pedal bracket assembly to move, causing the creaking noise. If the bracket completely separates from the firewall, the clutch may become completely inoperative, it already frequently feels like I cannot push the clutch in far enough to get it into gear. Feedback from the online forums shows Subaru is not addressing the problem of the faulty welds leading to expensive consumer repairs or alternative diy fixes. *tr

NHTSA complaint #10534894
Aug 12, 2013power train
The clutch pedal on my 2008 wrx makes a loud creaking noise every time it's depressed (it will also pop if cold out). After reading other complaints online I found the entire clutch pedal bracket assembly (attached to the forward firewall) shifts approx 1/4 inch every time the clutch pedal is depressed, also causing the brake pedal to flex to the left. I can see at least two… Read more

The clutch pedal on my 2008 wrx makes a loud creaking noise every time it's depressed (it will also pop if cold out). After reading other complaints online I found the entire clutch pedal bracket assembly (attached to the forward firewall) shifts approx 1/4 inch every time the clutch pedal is depressed, also causing the brake pedal to flex to the left. I can see at least two of my three spot welds securing the clutch pedal bracket to the forward firewall are broken. The whole clutch pedal assembly pulls away from the firewall every time the clutch pedal is depressed, the slave cylinder unit visibly moves. This allows the entire clutch pedal bracket assembly to move, causing the creaking noise. If the bracket completely separates from the firewall, the clutch may become completely inoperative, it already frequently feels like I cannot push the clutch in far enough to get it into gear. Feedback from the online forums shows Subaru is not addressing the problem of the faulty welds leading to expensive consumer repairs or alternative diy fixes. *tr

NHTSA complaint #10534889
Jun 30, 2013power train
My clutch pedal starting squeaking in january. I thought it was squeaking because it was cold outside and thought that the problem would go away once the weather got warmer. However this is not the case and upon inspection, my spot welds are broken where the clutch attaches to the firewall. After a search, I have found that this is an extremely common problem with this… Read more

My clutch pedal starting squeaking in january. I thought it was squeaking because it was cold outside and thought that the problem would go away once the weather got warmer. However this is not the case and upon inspection, my spot welds are broken where the clutch attaches to the firewall. After a search, I have found that this is an extremely common problem with this model car and no recall has been issued. I have also found that many people have not had any luck at all by trying to get the dealer to fix the issue. It is definitely a flaw with the car and not an isolated incident with just me. *tr

NHTSA complaint #10522448
Jun 30, 2013power train
My clutch pedal starting squeaking in january. I thought it was squeaking because it was cold outside and thought that the problem would go away once the weather got warmer. However this is not the case and upon inspection, my spot welds are broken where the clutch attaches to the firewall. After a search, I have found that this is an extremely common problem with this… Read more

My clutch pedal starting squeaking in january. I thought it was squeaking because it was cold outside and thought that the problem would go away once the weather got warmer. However this is not the case and upon inspection, my spot welds are broken where the clutch attaches to the firewall. After a search, I have found that this is an extremely common problem with this model car and no recall has been issued. I have also found that many people have not had any luck at all by trying to get the dealer to fix the issue. It is definitely a flaw with the car and not an isolated incident with just me. *tr

NHTSA complaint #10522447
Mar 12, 2013power train
I noticed about 3 months ago my clutch assembly starting to squeak and started to stick when fully depressed. The past month driving is almost impossible with having trouble starting the car and almost having to jam gears just to shift. Took it to transmission shop 2 days ago and they told me that my clutch is completely gone. After going to them they found out what the issue… Read more

I noticed about 3 months ago my clutch assembly starting to squeak and started to stick when fully depressed. The past month driving is almost impossible with having trouble starting the car and almost having to jam gears just to shift. Took it to transmission shop 2 days ago and they told me that my clutch is completely gone. After going to them they found out what the issue was. The firewall where the master cylinder sits is completely cracked 2 ways. With ignition off you can pressing the clutch is see the firewall completely flexing without the car even being on. They told me there is nothing that they can do and told me to get in contact with the manufacturer. *tr

NHTSA complaint #10502574
Mar 6, 2013power train

Had a squeaky clutch pedal for the past few months. Yesterday it became very hard to shift into gear. I noticed when the clutch was depressed, both the brake and clutch pedals moved about 2" to the left. Looking further, it looks like the sport weld have given way where the brace mounts to the firewall. Researching I found many people with the same issue. Car is almost undriveable and unsafe. *tr

NHTSA complaint #10501866
Jan 21, 2013power train, structure, engine
My clutch bracket broke on the welds. This is an oem product that has a defect and it is well known on the internet and forums. Subaru of newton nj refuses to fix the problem and was well aware. This was very dangerous for me since it happened on a highway at speeds of 65 MPH. The bracket is broken and the clutch will not engage. I have noticed the firewall is cracking also.… Read more

My clutch bracket broke on the welds. This is an oem product that has a defect and it is well known on the internet and forums. Subaru of newton nj refuses to fix the problem and was well aware. This was very dangerous for me since it happened on a highway at speeds of 65 MPH. The bracket is broken and the clutch will not engage. I have noticed the firewall is cracking also. The brake pedal moves inches to the side when the clutch is pressed. This is a very dangerous problem. I am very disappointed with Subaru and the car only has 73k miles on it. I also filled with Subaru and I am awaiting answers. *tr

NHTSA complaint #10493699
Jan 16, 2013power train, structure, service brakes
My 2008 Subaru Impreza wrx has had a "hard clutch pedal". Im an auto tech at a dealer so I took a look at it. I checked the spring and the pedal. I found the pedal would bend the mounting location under the dash when pushed in. I looked on the firewall under my wiper arms where the welds are at. The weld that holds the clutch and brake pedals to the firewall is cracked and now… Read more

My 2008 Subaru Impreza wrx has had a "hard clutch pedal". Im an auto tech at a dealer so I took a look at it. I checked the spring and the pedal. I found the pedal would bend the mounting location under the dash when pushed in. I looked on the firewall under my wiper arms where the welds are at. The weld that holds the clutch and brake pedals to the firewall is cracked and now is cutting a hole in the firewall. I checked online for some help with the problem, and I found out im not the only one with this problem. I took the car to my local Subaru dealer. The dealer told me I needed a clutch. I ask them to look at the firewall welds that hold the clutch and brake pedals to the car. They told me to go away and not bring my car back to them! I called Subaru of america after this all happened. They told me to take it to another dealer. So I did to one " 3 hours away ". The next dealer told me the car is not safe to drive and weld is cracked on the firewall, and they called Subaru of america (soa.) soa never called the dealer back and I took the car home and waited. They called me 5 days later and told me I would have to pay 1/2 of the bill to fix the oem defect on the firewall welds. I feel as though they don't care about this safety issue even though after some research online it is clear that im not the only one having this same issue. I have videos and pictures showing the defective welds and can produce them for you. I noticed this issue around 58000 miles. Vehicle now

NHTSA complaint #10493245
← All 2008 Subaru Impreza problems & recalls