Nov 11, 2026steering, unknown or other
The steering column-mounted gear shifter on my 2018 Ram 2500 is experiencing a severe brake transmission shift interlock (btsi) failure. Initially, the shifter became locked in the park position and would not shift out of park even with the brake pedal fully depressed. Subsequently, the shift interlock mechanism failed in the opposite direction: when placed into park, the… Read more
The steering column-mounted gear shifter on my 2018 Ram 2500 is experiencing a severe brake transmission shift interlock (btsi) failure. Initially, the shifter became locked in the park position and would not shift out of park even with the brake pedal fully depressed. Subsequently, the shift interlock mechanism failed in the opposite direction: when placed into park, the shifter will not stay locked in park and can move out of park without pressing the brake pedal, creating an immediate unintended vehicle rollaway hazard. My VIN currently shows no open recalls, yet my truck is exhibiting the exact safety defect described in NHTSA recall campaign 18v-100 (fca recall u11). I am requesting that NHTSA investigate this repeat or unaddressed shift interlock failure on 2018 Ram 2500 vehicles and that fca/Ram cover the repair as a safety defect.
NHTSA complaint #11777349
Oct 14, 2026steering, service brakes
NHTSA recall number 24v-896 was marked as completed on my vehicle but I'm telling you the work was never done. It was marked as complete on 27 september (that's a sunday) of this year. I called stellantis recall department and they just say it's complete but can't tell me who actually did the work or who completed it, just totally stonewalled me, so I'm contacting you. I… Read more
NHTSA recall number 24v-896 was marked as completed on my vehicle but I'm telling you the work was never done. It was marked as complete on 27 september (that's a sunday) of this year. I called stellantis recall department and they just say it's complete but can't tell me who actually did the work or who completed it, just totally stonewalled me, so I'm contacting you. I haven't even been to a dealership in about 10 months for anything. This was either accidentally marked complete or fraudulent, I don't know, but this recall should still be listed as open for my truck. What do I do?
NHTSA complaint #11771032
Oct 6, 2026steering
The contact owns a 2018 Ram 2500. The contact stated that the vehicle was repaired under NHTSA campaign number: 19v021000 (steering); however, after taking the vehicle to a dealer for a tire replacement, the contact was informed by the dealer that the wheels could not be aligned because the drag link assembly failed to meet manufacturer specifications, and that the entire… Read more
The contact owns a 2018 Ram 2500. The contact stated that the vehicle was repaired under NHTSA campaign number: 19v021000 (steering); however, after taking the vehicle to a dealer for a tire replacement, the contact was informed by the dealer that the wheels could not be aligned because the drag link assembly failed to meet manufacturer specifications, and that the entire assembly needed to be replaced. The vehicle was not repaired. The manufacturer was notified of the failure. The failure mileage was 40,000.
NHTSA complaint #11769283
Aug 19, 2026steering, vehicle speed control, service brakes
The hydro boost pump port tube assembly (mopar p/n 04581758aa / 4581758aa) on my 2018 Ram 2500 6.7l cummins has failed and requires replacement. My concern is that this component is part of the hydraulic assist system supporting critical steering/braking functions. A failure or loss of hydraulic pressure could result in significantly increased steering or braking effort and… Read more
The hydro boost pump port tube assembly (mopar p/n 04581758aa / 4581758aa) on my 2018 Ram 2500 6.7l cummins has failed and requires replacement. My concern is that this component is part of the hydraulic assist system supporting critical steering/braking functions. A failure or loss of hydraulic pressure could result in significantly increased steering or braking effort and create a serious safety hazard, particularly while towing, carrying a load, or traveling at highway speeds. I am requesting NHTSA review this component and determine whether similar failures have been reported on Ram 2500 vehicles and whether further investigation or manufacturer action is warranted.
NHTSA complaint #11757926
Aug 7, 2026steering, service brakes, hydraulic
The contact owns a 2018 Ram 2500. The contact stated that the vehicle experienced excessive and premature front tire tread wear. The vehicle was taken to discount tire, and the contact was informed that the front-end alignment mechanism was welded, which prevented an alignment from being performed, which caused the premature tread wear. The technician associated the failure… Read more
The contact owns a 2018 Ram 2500. The contact stated that the vehicle experienced excessive and premature front tire tread wear. The vehicle was taken to discount tire, and the contact was informed that the front-end alignment mechanism was welded, which prevented an alignment from being performed, which caused the premature tread wear. The technician associated the failure with NHTSA campaign number: 19v021000 (steering). Additionally, the contact stated that the ABS warning light illuminated, followed by a continuous warning chime while driving. The contact associated the failure with NHTSA campaign number: 24v896000 (service brakes, hydraulic); however, the part to do the recall repair was not yet available. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The dealer was contacted and associated the warning light with the recall. The vehicle was not repaired. The manufacturer was notified of the failure and confirmed that parts were not yet available. The failure mileage was approximately 65,000.
NHTSA complaint #11755443
Jun 16, 2026steering
The truck started with a death wobble in the steering. Ball joints,bushing,stabilizer bar replaced front end work was done. Brought to the dealership approx 4 times for the same steering problem. It still has a small wobble pulling to the rt or left. Steering was very loose but has been tightened up with a replaced steering shock. But the steering wobble continues had the… Read more
The truck started with a death wobble in the steering. Ball joints,bushing,stabilizer bar replaced front end work was done. Brought to the dealership approx 4 times for the same steering problem. It still has a small wobble pulling to the rt or left. Steering was very loose but has been tightened up with a replaced steering shock. But the steering wobble continues had the steering gear box replaced twice. Dealership does not know how to fix the problem.
NHTSA complaint #11744483
May 29, 2026steering, service brakes
The recall for the hbc unit listed under NHTSA recall #24v-896 is a serious safety concern and causes daily issues driving the vehicle. Without a load in the bed the rear-end is very light so the tires spin easily with the loss of traction control associated with this recall. Also during the rain the truck is almost undriveable due to the frequent tire spins while barely using the throttle.
NHTSA complaint #11740945
Mar 19, 2026steering, service brakes, hydraulic, service brakes, airCrash
The contact owns a 2018 Ram 2500. The contact stated that while driving at 40-45 MPH, the brakes and steering became inoperable, causing him to crash into an unknown vehicle. The air bags in the other vehicle did deploy. There were no reported injuries, air bag deployments, or fire for the contact's vehicle. A police report was filed. The traction control and ABS warning… Read more
The contact owns a 2018 Ram 2500. The contact stated that while driving at 40-45 MPH, the brakes and steering became inoperable, causing him to crash into an unknown vehicle. The air bags in the other vehicle did deploy. There were no reported injuries, air bag deployments, or fire for the contact's vehicle. A police report was filed. The traction control and ABS warning lights illuminated. The local dealer was contacted, where it was diagnosed that the failure was related to the hcu and ABS control unit/NHTSA campaign number: 24v896000 (service brakes, hydraulic). The parts were backordered, and the vehicle was not repaired. The manufacturer was not notified. The failure mileage was approximately 90,598.
NHTSA complaint #11725478
Dec 3, 2025steering, electrical system, service brakesCrash
Please add this to complaint number: 11702732 this is a supplemental complaint regarding the same safety issue I previously reported involving safety recall c4b on my 2018 Ram 2500 - complaint # 11702732 in addition to the safety concerns and the prior accident I described in my original complaint, the unresolved recall has also caused significant financial harm. I still owe… Read more
Please add this to complaint number: 11702732 this is a supplemental complaint regarding the same safety issue I previously reported involving safety recall c4b on my 2018 Ram 2500 - complaint # 11702732 in addition to the safety concerns and the prior accident I described in my original complaint, the unresolved recall has also caused significant financial harm. I still owe approximately $15,100 on the vehicle and must make a $515 monthly payment. Because the recall remedy has been unavailable for years, I cannot legally sell or trade the vehicle, even though it should have substantial equity. The truck’s resale value has dropped due to the open safety recall with no remedy, leaving me financially stuck with an unsafe vehicle I cannot get rid of and a high payment that I currently cannot afford due to job loss. The unresolved recall continues to put me in danger during winter driving, and the lack of remedy has created both a safety crisis and a serious financial hardship. Please attach this information to my previous complaint for the same VIN.
NHTSA complaint #11702746
Dec 3, 2025steering, electrical system, service brakesCrash
The brake hydraulic control unit (hcu) covered under safety recall c4b has been unavailable for several years, leaving my 2018 Ram 2500 with ongoing ABS, traction control, and electronic stability control malfunctions. This defect has already caused an actual accident. In january 2024, during snow conditions, the ABS and traction control failed while I was braking in my… Read more
The brake hydraulic control unit (hcu) covered under safety recall c4b has been unavailable for several years, leaving my 2018 Ram 2500 with ongoing ABS, traction control, and electronic stability control malfunctions. This defect has already caused an actual accident. In january 2024, during snow conditions, the ABS and traction control failed while I was braking in my driveway. The truck slid uncontrollably and struck a tree, causing over $10,000 in damage that had to be repaired through my insurance. This incident occurred specifically because the brake and stability systems did not function properly. The issue continues to create serious safety risks, especially in winter. The warning lights for ABS and traction control are on constantly, accompanied by continuous dinging that is extremely distracting and stressful to drive with. The truck loses stability on snow or ice, braking distance is increased, and the vehicle behaves unpredictably. I am now driving again in snow and ice this winter, and I am genuinely afraid this defect will cause another accident. Despite this being an acknowledged safety recall, every dealership I contact says the replacement hcu part is still “not available” for my vehicle. This has been confirmed repeatedly by multiple dealerships and by the manufacturer’s recall hotline. I have attempted to get this recall repaired for several years with no success. Because the recall remedy is unavailable, the vehicle remains unsafe to operate, yet I hav
NHTSA complaint #11702732
Mar 25, 2022steeringCrash2 injured
The contact owns a 2018 Ram 2500. The contact stated while her husband was driving approximately 25 MPH the steering wheel lost functionality, the vehicle veered to the left off of the roadway. The vehicle collided with a reinforced cinder block wall on the driver's side front end, the hood impacted first and was crushed with additional damage to the undercarriage. The contact… Read more
The contact owns a 2018 Ram 2500. The contact stated while her husband was driving approximately 25 MPH the steering wheel lost functionality, the vehicle veered to the left off of the roadway. The vehicle collided with a reinforced cinder block wall on the driver's side front end, the hood impacted first and was crushed with additional damage to the undercarriage. The contact stated no warning light was illuminated. The airbags did not deploy. The husband was transported from the scene by ambulance to a hospital. The husband received cuts to left side of head and left side of face, additionally the contact had minor cuts to the left side of her face and bruised left forearm. The police were on scene and an incident report was written. The vehicle was towed to a towing lot and later towed to a collision repair center. The vehicle was not repaired. The contact researched online and related the failure to NHTSA campaign number 19v021000 (steering). The manufacturer had not been informed of the failure. The failure mileage was approximately 37,000.
NHTSA complaint #11458336
Feb 13, 2022steering, unknown or otherCrash3 injured
We were involved in a single car crash, it’s been over a month and it’s still under investigation. The steering link was still intact. Is there another reason that would have caused us to loose control of the steering and crash?
NHTSA complaint #11451722
Aug 10, 2021steering, suspensionCrash
Regarding the safety recall v06 / NHTSA 19v-021 drag link. This issue regarding the jam nuts on the drag link needs to be remedied. It calls for welding an adjustable part of the steering linkage rendering it non- adjustable when having the front end aligned in the future. Not to mention the effect of welding, potentially causing a problem with the integrity of the metal.… Read more
Regarding the safety recall v06 / NHTSA 19v-021 drag link. This issue regarding the jam nuts on the drag link needs to be remedied. It calls for welding an adjustable part of the steering linkage rendering it non- adjustable when having the front end aligned in the future. Not to mention the effect of welding, potentially causing a problem with the integrity of the metal. The correct fix for this safety issue is to replace this steering linkage component, the entire drag link! And not a weld job on the steering linkage of all things! I am appalled that NHTSA approved such a thing. Please revisit this issue and do the right thing. Require chrysler (fca us llc) to replace this defective part with the proper part. Note.... Chrysler is not welding the nuts on the drag links on trucks coming off the assembly line! They are coming off with proper, safe, adjustable drag links!
NHTSA complaint #11428540