At 31,000 mile my horn is no longer working along with my steering wheel controls on the left side of the wheel. Upon researching online it seems these truck have a common issue with clock spring fail. This is concerning because not only does the clock spring provide power to the horn and steering wheel controls, it could also effect the airbag function.
2017 Ram 2500 steering problems
49 owners reported steering problems — 7% of all 699 complaints about the 2017 Ram 2500.
Steering complaints by Ram 2500 year
What owners report
This cheap fix is abhorrent! It calls for welding an adjustable part of the steering linkage rendering it non- adjustable when having the front end aligned in the future. Not to mention the effect of welding, potentially causing a problem with the integrity of the metal. The correct fix for this safety issue is to replace this steering linkage component, the entire drag link!… Read more
This cheap fix is abhorrent! It calls for welding an adjustable part of the steering linkage rendering it non- adjustable when having the front end aligned in the future. Not to mention the effect of welding, potentially causing a problem with the integrity of the metal. The correct fix for this safety issue is to replace this steering linkage component, the entire drag link! Not do a "back yard, shade tree mechanic" weld job on the steering linkage of all things! I am appalled that NHTSA approved such a thing. Please revisit this issue and do the right thing. Require chrysler (fca us llc) to replace this defective part with the proper part. Note.... Chrysler is not welding the nuts on the drag links on trucks coming off the assembly line! They are coming off with proper, safe, adjustable drag links! I contacted fca and they said they cannot redo the recall because it's out of the window to get it repaired again. This is not a safe fix. The recall says after this welding, the vehicle can still get a proper alignment from dealer, which is not true. I contacted the dealer and they said I should contact fca, but that sent me back to my original issue. I can't get an alignment even though the recall fix says I can. I dealer refuses to do it. I bought this truck used from the dealer and they wouldn't fix it at the time either. I pull a fifth wheel trailer with my truck and I need an alignment. This recall weld fix is just not right, a cheap fix for a long-term problem and very un
I am writing to formally demand that stellantis replace the drag link assembly on my 2017 Ram 2500 at no cost to me. The welding performed during safety recall v06 in 2019 has rendered my vehicle unable to receive proper wheel alignment, creating an ongoing safety issue and causing premature tire wear. Background in 2019, my vehicle was brought to dealer to have safety recall… Read more
I am writing to formally demand that stellantis replace the drag link assembly on my 2017 Ram 2500 at no cost to me. The welding performed during safety recall v06 in 2019 has rendered my vehicle unable to receive proper wheel alignment, creating an ongoing safety issue and causing premature tire wear. Background in 2019, my vehicle was brought to dealer to have safety recall v06 performed. The recall procedure involved welding the jam nuts to the adjuster sleeve on the drag link. I was not informed at the time that this welding would permanently prevent future alignment adjustments to the drag link. Approximately three months ago, I purchased new tires for my vehicle. When I took my truck to have a wheel alignment performed, I was informed that the alignment cannot be completed because the drag link jam nuts are welded and cannot be adjusted. The alignment is significantly out of specification, causing uneven tire wear and compromised vehicle handling. Current situation I contacted hendricks Ram in cary nc regarding this issue. The dealership has confirmed that: 1.my vehicle cannot be properly aligned due to the welded drag link 2.Ram/stellantis is refusing to break the welds and replace with the new adjustable drag link kit 3.I am being asked to pay approximately $2,000 out of pocket to correct a problem that was directly caused by stellantis's recall repair legal and regulatory basis for this demand october 2023 tsb update: stellantis issued revised technical service bull
1. Failure to address a safety recall promptly when scheduling the appointment, I informed the dealership of an open safety recall (recall v06, NHTSA 19v-021) involving the steering linkage jam nut (a defect which can cause loss of steering control). This recall is critical for safety, yet I was told on the phone that the dealership “could not work on it yet” due to… Read more
1. Failure to address a safety recall promptly when scheduling the appointment, I informed the dealership of an open safety recall (recall v06, NHTSA 19v-021) involving the steering linkage jam nut (a defect which can cause loss of steering control). This recall is critical for safety, yet I was told on the phone that the dealership “could not work on it yet” due to unspecified changes being made by the manufacturer. Upon arrival, I asked again about this recall. The service advisor stated it would require a separate appointment with a “special mechanic” and thus declined to even inspect the vehicle that day. This is extremely disheartening – a known safety defect (announced in january 2019) remains unaddressed on my truck almost seven years later, and the dealership made no effort to expedite or even evaluate the need for repair. As a loyal dodge customer, I am very concerned that an authorized dealer would postpone a safety recall inspection, leaving me driving a potentially unsafe vehicle. Safety recalls should be handled with urgency, and I urge dodge to ensure that this recall (v06) is rectified on my truck immediately. It is unacceptable that I must continue driving with a defect that “can result in a loss of steering control… causing a crash without warning,” according to the recall description I found on your site.
The contact owns a 2017 Ram 2500. The contact stated that the vehicle was taken to the local dealer for the recall repair under NHTSA campaign number: 19v021000 (steering). The vehicle was repaired; however, the drag link nut was welded, and the vehicle was unable to be aligned. The contact called the local dealer and was informed that the weld needed to be cut, the vehicle… Read more
The contact owns a 2017 Ram 2500. The contact stated that the vehicle was taken to the local dealer for the recall repair under NHTSA campaign number: 19v021000 (steering). The vehicle was repaired; however, the drag link nut was welded, and the vehicle was unable to be aligned. The contact called the local dealer and was informed that the weld needed to be cut, the vehicle aligned, and then the drag link nut welded again. The vehicle was not diagnosed or repaired. The manufacturer was contacted and referred the contact to the local dealer for assistance. The contact was informed about the reimbursement process for the repair. The failure mileage was unknown.
When I have gone to slow down and try to stop, the vehicle has slide forward a fee times. I thought it was a little weird, but didn't think to much of it. After a while, my transmission started acting up as well. I will be driving down the road about 50-60mph and it will shift to 4th gear and not come out of 4th gear until stopped and shut off and restarted. I recently… Read more
When I have gone to slow down and try to stop, the vehicle has slide forward a fee times. I thought it was a little weird, but didn't think to much of it. After a while, my transmission started acting up as well. I will be driving down the road about 50-60mph and it will shift to 4th gear and not come out of 4th gear until stopped and shut off and restarted. I recently heard about the recall when I took my truck to the dealership that is close to where I am located at the moment. I decided to research about the recall and what could happen if that part fails. It showed me that if the recalled part fails, it will cause all the problems that is going on with my truck. I am a full-time rv'er and trailer the country pulling an rv everywhere I go. I am stuck where I am until my truck can be fixed of these problems. This is a major setback and a major financial burden to have to stay where I am until it is fixed. I am near thomson, ga where I am waiting to have my vehicle fixed.
My hcu has failed resulting in loss of traction & locked steering wheel. The truck is not safely operable at this time and dealerships have repeatedly told me they can’t fix it. This has been going on for 2 months.
While driving down the highway, on a right hand corner I turned and could hear and feel a 'pop'. Then had slop in the steering, nearly causing me to catastrophically crash . I controlled it enough off the roadway into a field and stopped, if there was a guardrail or drop off, I would have majorly crashed. I could turn left, go straight. But going right I'd turn the wheel 1… Read more
While driving down the highway, on a right hand corner I turned and could hear and feel a 'pop'. Then had slop in the steering, nearly causing me to catastrophically crash . I controlled it enough off the roadway into a field and stopped, if there was a guardrail or drop off, I would have majorly crashed. I could turn left, go straight. But going right I'd turn the wheel 1 full turn before it 'engaged' steering. After inspecting the truck, I noticed the track bar would move 4-6 inches before the wheels would ever move. When shaking the wheel while parked, the wheels would not move but the entire body of the truck was moving like crazy as if it were dancing. After pulling the track bar off the truck, the entire 'head' around the bearing attached to front passenger side was completely sheared sheared on 1 point causing the bearing to have free play. This truck is 3 years old with 57,000 pavement miles. Catastrophic failure of the steering mechanism should not happen and could potentially kill someone.
Driving 2017 dodge Ram 2500 4x4 on paved rural roadway traveling 50mph when steering wheel lost tension and would not steer appropriately. Vehicle began to lose traction and correction was not possible. While when driver attempted to brake, brake pedal was pressed firmly and did not brake. Vehicle maintained speed due to brake failure and steering, vehicle went into side skid… Read more
Driving 2017 dodge Ram 2500 4x4 on paved rural roadway traveling 50mph when steering wheel lost tension and would not steer appropriately. Vehicle began to lose traction and correction was not possible. While when driver attempted to brake, brake pedal was pressed firmly and did not brake. Vehicle maintained speed due to brake failure and steering, vehicle went into side skid for 100 yards before hitting deep ditch and rolling vertically into ditch landing on wheels. Accident resulted in injuries to both driver and passenger.