CarProblemsDB

2015 Ram 2500 steering problems

43 owners reported steering problems — 20% of all 216 complaints about the 2015 Ram 2500.

Steering complaints by Ram 2500 year

20262
20253
20241
20235
20227
20215
202010
201911
201888
201749
201643
201543
201487
201331
2012109
2011210
20094

What owners report

Sep 9, 2025steering
The contact owns a 2015 Ram 2500. The contact stated that the vehicle was initially repaired under NHTSA campaign number: 19v021000 (steering) at a local dealer; however, after the recall repair was performed, the vehicle was unable to receive a front alignment. The contact requested that the welds be removed to perform the alignment; however, several dealers and independent… Read more

The contact owns a 2015 Ram 2500. The contact stated that the vehicle was initially repaired under NHTSA campaign number: 19v021000 (steering) at a local dealer; however, after the recall repair was performed, the vehicle was unable to receive a front alignment. The contact requested that the welds be removed to perform the alignment; however, several dealers and independent mechanics refused to remove the welds. The dealer had spoken with the manufacturer, but neither had offered any assistance. The mopar manufacturer was also notified of the failure, and the contact was given a case number. The vehicle remained in the possession of the dealer. The failure mileage was approximately 106,000. The VIN was not available.

NHTSA complaint #11685996
Jul 25, 2025steering, electrical system, service brakes
While driving down highway 65 MPH, ABS system activated causing right rear brakes to activate causing vehicle to activate steering control making truck head towards on coming traffic before able to control vehicle to shoulder of roadway. Would like to know if, when, and who and where any previous recall work has been performed to this vehicle, bought at a dealership in… Read more

While driving down highway 65 MPH, ABS system activated causing right rear brakes to activate causing vehicle to activate steering control making truck head towards on coming traffic before able to control vehicle to shoulder of roadway. Would like to know if, when, and who and where any previous recall work has been performed to this vehicle, bought at a dealership in oklahoma with check engine light on, told it was gas cap. Turns out it was not a gas cap, there was programming involved to remove the mil function of brake system. ECM was sent to a 3rd party vendor and unlocked, afterwards the previous program was unlocked showing disabling of mil functions for several functions. Vehicle is having issues with electrical radiator fan causing excessive heat in compartment, what was the fix for this by mfg? Was it to just program out the electric fan from coming on at high speed ? Now engine within 20 minutes of idling overheats truck( road construction/wrecks)

NHTSA complaint #11676193
Jul 3, 2024steering
Over the past 2 years we have had issues with the front end particularly the drag link coming loose and major steering problems and major bouncing which resulted in purchasing 2 new sets of tires within 2 years. It was brought to our attention that there was a recall for the exact same issue from NHTSA recall# v06 19v-021. Unfortunately our VIN number was not listed on the… Read more

Over the past 2 years we have had issues with the front end particularly the drag link coming loose and major steering problems and major bouncing which resulted in purchasing 2 new sets of tires within 2 years. It was brought to our attention that there was a recall for the exact same issue from NHTSA recall# v06 19v-021. Unfortunately our VIN number was not listed on the recall although our truck was having the same issue that was listed in the recall. I have contacted NHTSA and filed a safety complaint (complaint# 11570103). Over the 2 years, we have had the drag link repaired twice which has cost us approximately $4700 in repair costs and tire replacement which could have been covered had our truck was listed under the recall. I have requested NHTSA to investigate and list our truck under the recall and is requesting refunds to the repairs I have already paid for. This request has been declined and that is not acceptable. Please add my vehicle under the recall so I can request a reimbursement. I want somebody to call me directly at [xxx] today. Information redacted pursuant to the freedom of information act (foia), 5 u.s.c. 552(b)(6)

NHTSA complaint #11598576
Feb 5, 2024steering
Our vehicle was not part of the safety recall v06/NHTSA 19v-21 recall based on VIN but have been experiencing same issues in the recall: drag link separation can result in a loss of directional steering control. We have had several close calls of truck losing control. Vehicle currently in authorized dealership with the following diagnosis: upon inspection, technician found… Read more

Our vehicle was not part of the safety recall v06/NHTSA 19v-21 recall based on VIN but have been experiencing same issues in the recall: drag link separation can result in a loss of directional steering control. We have had several close calls of truck losing control. Vehicle currently in authorized dealership with the following diagnosis: upon inspection, technician found the track bar to continuously back off, no known fix for this issue. Requesting our truck VIN [xxx] to be claimed under this recall. It is possible that other trucks that were manufactured from the same plant as ours could have been built with these defective parts. Information redacted pursuant to the freedom of information act (foia), 5 u.s.c. 552(b)(6) the contact is requesting that their vehicle be added to the safety recall in order for their truck to be repaired.

NHTSA complaint #11570103
Nov 12, 2023steering, structure

Where the traction bar mount is welded to the frame sheered off the frame while driving on the freeway causing me to lose steering control. Was not in an accident but I found that recall safety recall r46 / NHTSA 15v-541 for the two previous years was an issue. I have photos of the damaged traction control mount and will show where the separation was the same as the recall on 2013 and 2014 rams.

NHTSA complaint #11554736
Aug 9, 2023steering

At highway speed vehicle did not have issues until steering into a hard turn. Steering became very heavy and lost power steering intermittently. Same issue occurred at low speed during turns

NHTSA complaint #11537547
Jun 9, 2023steering

My reimbursement for a recall I paid out of pocket was approved and a check was supposed to be sent to me, but has never been sent. I have called mopar several times and they tell me they are sending the check to me but never do.

NHTSA complaint #11526173
Feb 6, 2023steering, service brakes

The vehicle slid out of gear with no keys or brake; children were in car and escaped injury but very unsafe gear shift lever broke off steering column (separate incident)

NHTSA complaint #11505743
Sep 19, 2022steering, service brakes

The power steering pump bolts sheared off their mounts, causing a catastrophic and instant loss of my ability to steer and/or brake without great difficulty. While we were in a parking lot at the time, we had just crossed over a mountain pass, while hauling a 7200 lb travel trailer. Had it detached on a downhill, winding highway, this very easily would have been a fatal flaw.

NHTSA complaint #11485192
Dec 24, 2021steering
I received a recall for 19v021000 I went an had the dealer fix the recall an they welding the jam nuts as a temporary fix now I’m unable to have alignment la done so what am I supposed to do for alignment an for tire wear the fix is me spending 850 dollars for different control arms that should’ve been fixed the first time. The dealer stated that it was a temporary repair… Read more

I received a recall for 19v021000 I went an had the dealer fix the recall an they welding the jam nuts as a temporary fix now I’m unable to have alignment la done so what am I supposed to do for alignment an for tire wear the fix is me spending 850 dollars for different control arms that should’ve been fixed the first time. The dealer stated that it was a temporary repair until chrysler came up with a solution but it’s been three years an still no fix. Very unacceptable.

NHTSA complaint #11444924
Jul 23, 2021steering
I was looking under my truck and noticed that I have a welded drag link, from my understanding this was supposed to be a temporary fix until a permanent remedy was available. This is supposed to be an adjustable drag link and I believe mine was welded out of adjustment and there is no way to adjust it now. The recall never was changed to replacement parts available they just… Read more

I was looking under my truck and noticed that I have a welded drag link, from my understanding this was supposed to be a temporary fix until a permanent remedy was available. This is supposed to be an adjustable drag link and I believe mine was welded out of adjustment and there is no way to adjust it now. The recall never was changed to replacement parts available they just welded them and went on. So now what the owners have to buy a complete replacement part to be able to adjust it?

NHTSA complaint #11426066
May 19, 2021steering
The contact owns a 2015 Ram 2500. The contact stated that the vehicle was repaired under NHTSA campaign number: 19v021000 (steering) at the local dealer. After the recall repair was performed, the contact was unable to have the alignment or the tires removed from the vehicle due to the weld stated in the recall repair. The dealer was contacted and made aware of the failure.… Read more

The contact owns a 2015 Ram 2500. The contact stated that the vehicle was repaired under NHTSA campaign number: 19v021000 (steering) at the local dealer. After the recall repair was performed, the contact was unable to have the alignment or the tires removed from the vehicle due to the weld stated in the recall repair. The dealer was contacted and made aware of the failure. The manufacturer was informed of the failure. The failure mileage was approximately 30,000.

NHTSA complaint #11417787
Mar 26, 2021steering
Safety recall v06/NHTSA 19v-021. This recall was performed by a dealer with full explanation of what was being done. Their 'fix' as approved by you has removed serviceability of the steering system. Welding in place as a 'fix' is beyond acceptable! This basically has passed the responsibility to the owner and creates a greater safety issue of needing to other steering and… Read more

Safety recall v06/NHTSA 19v-021. This recall was performed by a dealer with full explanation of what was being done. Their 'fix' as approved by you has removed serviceability of the steering system. Welding in place as a 'fix' is beyond acceptable! This basically has passed the responsibility to the owner and creates a greater safety issue of needing to other steering and readability issues! Dodge/fca engineers 'reinvented the wheel' by utilizing a jam-nut set-up that didn't work. They ultimately corrected the problem on the 2019 models by returning to the tried and true split tube with clamp design. I want my truck repaired correctly to a safe and usable condition in respect to their ultimate design correction standard. You guys are tasked with consumer safety; you need to have people making these decision fully understand what you accept from manufacturers!

NHTSA complaint #11405082
Dec 11, 2020steering, suspension, power train
Transmission never shifted correctly from the first day I bought this truck new. Drag link feel apart while making a left turn. This has been replaced. The transmission has had a new torque converter replaced but still never solved all the problems. Now the "f"[xxx] solenoid needs replacement shifting into 4th gear while on highway at 70 MPH. This happens various times. Just… Read more

Transmission never shifted correctly from the first day I bought this truck new. Drag link feel apart while making a left turn. This has been replaced. The transmission has had a new torque converter replaced but still never solved all the problems. Now the "f"[xxx] solenoid needs replacement shifting into 4th gear while on highway at 70 MPH. This happens various times. Just at the higher speeds above 50 MPH. Information redacted pursuant to the freedom of information act (foia), 5 u.s.c. 552(b)(6).

NHTSA complaint #11383054
Sep 30, 2020steering
This vehicle has had the recall on the steering performed, and ever since they tac welded the drag nut, the alignment is extremely inaccurate which is also causing the steering wheel to be completely off. Due to now not being able to have a proper alignment done to factory specs because of this "temporary fix" I am now replacing front tires in a year of having the vehicle due… Read more

This vehicle has had the recall on the steering performed, and ever since they tac welded the drag nut, the alignment is extremely inaccurate which is also causing the steering wheel to be completely off. Due to now not being able to have a proper alignment done to factory specs because of this "temporary fix" I am now replacing front tires in a year of having the vehicle due to severe uneven tire wear on the front tires because of a "temporary fix" instead of just replacing the parts.

NHTSA complaint #11361953
Jul 21, 2020steering
Tl* the contact owns a 2015 Ram 2500. The contact received notification of NHTSA campaign number: 19v021000 (steering). The vehicle was taken to autoworld dodge chrysler jeep Ram (1370 auto center dr, petaluma, ca 94952) where the recall repair was completed. The contact stated that the vehicle was taken to a tire center for a front wheel alignment however, the technician was… Read more

Tl* the contact owns a 2015 Ram 2500. The contact received notification of NHTSA campaign number: 19v021000 (steering). The vehicle was taken to autoworld dodge chrysler jeep Ram (1370 auto center dr, petaluma, ca 94952) where the recall repair was completed. The contact stated that the vehicle was taken to a tire center for a front wheel alignment however, the technician was unable to perform the alignment because as a part of the recall repair, the drag link nut was welded to subframe. The vehicle was not repaired. A dealer was not notified of the failure. The manufacturer was made aware of the failure and provided a case number. The failure mileage was approximately 50,000.

NHTSA complaint #11340684
Jun 29, 2020steering, fuel system, diesel
Tl* the contact owns a 2015 Ram 2500. The contact received notification of NHTSA campaign number: 19v021000 (steering) and the vehicle was repaired at carl hogan chrysler dodge jeep Ram (2335 us-45, columbus, ms 39705). The contact stated that the recall repair caused damage to the vehicle due to the welding of the nut to the adjustment sleeve which caused the front end to be… Read more

Tl* the contact owns a 2015 Ram 2500. The contact received notification of NHTSA campaign number: 19v021000 (steering) and the vehicle was repaired at carl hogan chrysler dodge jeep Ram (2335 us-45, columbus, ms 39705). The contact stated that the recall repair caused damage to the vehicle due to the welding of the nut to the adjustment sleeve which caused the front end to be out of alignment. The contact stated that the check engine warning light illuminated prior to the recall repair. The contact was informed that the diesel exhaust fluid pump was defective and needed to be replaced. The diesel exhaust fluid pump was not replaced. The vehicle was next taken to an independent mechanic to have the tires rotated and the alignment checked. The contact was informed that the alignment was off due to the welding performed on the vehicle and to have the vehicle taken back to the dealer. The dealer informed the contact that the vehicle was in alignment. The manufacturer was notified of the failure and acknowledged knowing of similar failures after the recall repair was performed. The failure mileage was approximately 62,000.

NHTSA complaint #11331457
Jun 27, 2020steering, service brakes, engine
While driving on the interstate, going uphill under load, the fan shroud was sucked into the fan, breaking a fan blade off which punctured the radiator causing a loss of coolant and affecting engine power. This also could have lead to a failure of the engine accessory drive belt causing a loss of the power steering and brakes. This is the second occurrence of this failure on… Read more

While driving on the interstate, going uphill under load, the fan shroud was sucked into the fan, breaking a fan blade off which punctured the radiator causing a loss of coolant and affecting engine power. This also could have lead to a failure of the engine accessory drive belt causing a loss of the power steering and brakes. This is the second occurrence of this failure on my truck, and I know of a number of other owners of Ram cummins trucks with the exact same failure. The possible loss of the power steering and brakes at highway speeds is a very dangerous safety issue. *tr

NHTSA complaint #11331273
Sep 23, 2019steering

The current "fix" for recall "19v-021" is unacceptable. The fix that chrysler is currently using for this recall is to weld the jam nuts on the drag link. This fix is not a permanent solution and prevents the vehicle from having a proper steering alignment completed due to welding the nuts and preventing adjustments. The drag link on these vehicles needs to be replaced completely, not welded!

NHTSA complaint #11257269
Sep 6, 2019steering
Tl* the contact owns a 2015 Ram 2500. The vehicle was taken to westgate dodge Ram wake forest (10936 star rd, wake forest, nc 27587, (919) 809-6559) to be repaired per NHTSA campaign number: 19v021000 (steering) where the remedy was to weld the nut. The contact was concerned that the remedy was not the correct remedy for the recall due to welding two different metals together… Read more

Tl* the contact owns a 2015 Ram 2500. The vehicle was taken to westgate dodge Ram wake forest (10936 star rd, wake forest, nc 27587, (919) 809-6559) to be repaired per NHTSA campaign number: 19v021000 (steering) where the remedy was to weld the nut. The contact was concerned that the remedy was not the correct remedy for the recall due to welding two different metals together and burning the nut. The contact was also concerned that the remedy would stop the vehicle from having an alignment performed. The same dealer was called and informed the contact that the recall remedy was to weld the nut. The vehicle was not repaired. The manufacturer was made aware of the failure. The VIN was not available. The failure mileage was 76,000.

NHTSA complaint #11253634
May 18, 2019steering
A recall notice, (#v06/NHTSA 19v-021) was issued 1/31/2019. I immediately contacted meador chrysler dodge jeep that following week, and was told they had no timeframe for repair/replace of the defective and dangerous part. The following month, (march), I received another notice, contacted them, and I was placed on a list for the part to be ordered. Two more notices were… Read more

A recall notice, (#v06/NHTSA 19v-021) was issued 1/31/2019. I immediately contacted meador chrysler dodge jeep that following week, and was told they had no timeframe for repair/replace of the defective and dangerous part. The following month, (march), I received another notice, contacted them, and I was placed on a list for the part to be ordered. Two more notices were received and I went directly to the dealerships service manager to find out how much longer I must drive a dangerous vehicle before they would be able to repair it and was told "we are not concerned with 2015 vehicles now, only the 2018 and 2017", and "don't call us, we will call you when we are ready for yours". I have noticed slack in the front of my truck and heard some popping, yet the dealership is exhibiting absolutely no concern for our safety and potential loss of lives should the steering become separated while travelling at highway speeds. Please help me to understand why the dealerships are so lackadaisical in their attitudes when loss of life is possible. Thank you.

NHTSA complaint #11208422
May 13, 2019steering

I recently dropped my truck off for the v06 steering adjuster recall. It has now left my steering wheel unadjustable for future alignments. The nuts are welded solidly to the adjuster. Who is responsible for covering future alignments? I am now left with non serviceable steering componants that were subpar on chrysler end.

NHTSA complaint #11207329
Apr 22, 2019steering

When turning the steering wheel skips and pulls, happens every time I drive it. I do use the truck everyday couple times a month.

NHTSA complaint #11202813
Feb 6, 2019steering
Tl* the contact owns a 2015 Ram 2500. While driving 20 MPH, the contact made a left turn and heard an abnormal noise. The contact stated that the vehicle exhibited the same symptoms as listed in NHTSA campaign number: 19v021000 (steering). The vehicle was taken to an independent mechanic who diagnosed that the steering jam nut was fractured. The vehicle was repaired, but the… Read more

Tl* the contact owns a 2015 Ram 2500. While driving 20 MPH, the contact made a left turn and heard an abnormal noise. The contact stated that the vehicle exhibited the same symptoms as listed in NHTSA campaign number: 19v021000 (steering). The vehicle was taken to an independent mechanic who diagnosed that the steering jam nut was fractured. The vehicle was repaired, but the steering continued to fail. The vehicle was not taken to a dealer to be diagnosed or repaired. The manufacturer was notified of the failure. The failure mileage was approximately 144,000.

NHTSA complaint #11174720
Jan 28, 2019steering
Tl* the contact owns a 2015 Ram 2500. While driving 25 MPH, the steering wheel detached from the vehicle. There were no warning indicators illuminated. The contact was able to pull the vehicle over to the shoulder. The contact stated that the vehicle was experiencing the same failure listed in NHTSA action number: pe18016 (steering). The independent mechanic tightened the… Read more

Tl* the contact owns a 2015 Ram 2500. While driving 25 MPH, the steering wheel detached from the vehicle. There were no warning indicators illuminated. The contact was able to pull the vehicle over to the shoulder. The contact stated that the vehicle was experiencing the same failure listed in NHTSA action number: pe18016 (steering). The independent mechanic tightened the steering wheel bolts as a temporary remedy. The manufacturer was contacted, but was not able to assist. The dealer was not contacted. The failure mileage was 82,000.

NHTSA complaint #11172637
Oct 12, 2018steering
Tl* the contact owns a 2015 Ram 2500. While the vehicle was stationary and while driving various speeds, the steering ability failed and it was difficult to turn the steering wheel left or right. An independent mechanic assessed the vehicle and confirmed that the front track bar frame was faulty and needed to be replaced. The vehicle was not repaired. Bayway chrysler dodge… Read more

Tl* the contact owns a 2015 Ram 2500. While the vehicle was stationary and while driving various speeds, the steering ability failed and it was difficult to turn the steering wheel left or right. An independent mechanic assessed the vehicle and confirmed that the front track bar frame was faulty and needed to be replaced. The vehicle was not repaired. Bayway chrysler dodge jeep Ram (4000 pasadena freeway, pasadena, texas 77503, (713) 433-4000) was made aware of the failure and stated that there was no recall on the vehicle. The manufacturer was not made aware of the failure. The contact referenced NHTSA campaign number: 16v559000 (steering) as a potential cause of the failure. The failure mileage was approximately 71,000. The VIN was unknown.

NHTSA complaint #11140054
Aug 21, 2018steering, power train, service brakesFire
On 8.20.18 my vehicle going 70mph on the freeway and then made a large sound. I then lost all steering and braking on the highway. I barely was able to pull off without getting hit. After sitting, smoke started coming out of from under my hood. After popping the hood, there were flames down in the engine. I poured the little amount of drinking water on the flames to douse… Read more

On 8.20.18 my vehicle going 70mph on the freeway and then made a large sound. I then lost all steering and braking on the highway. I barely was able to pull off without getting hit. After sitting, smoke started coming out of from under my hood. After popping the hood, there were flames down in the engine. I poured the little amount of drinking water on the flames to douse them. The tow truck came and took us to the nearest dodge dealer (crown dodge in redding, california). They immediately noted it was likely due to recall t51, where the water pump overheats, breaks the belts, overheats the car and could cause an engine fire. This is exactly what happened. I tried to get this fixed with my local dealer months ago, but they didn't have the parts. I also never recieved any correspondence letters on the recall... I opened a ticket with dodge directly, they are investigating. This was very dangerous as I could barely control my car at that speed, losing steering and braking.. Scary, and then a fire!. Ugh...

NHTSA complaint #11121526
Jul 19, 2018steering

While driving my stock 2015 Ram 2500 70 MPH on freeway the front end began to shake uncontrollably after traveling over a common overpass. Steering was nearly impossible, and luckily I was able to pull off and stop. This has occurred several times since. Subsequent contact with two Ram dealerships, this problem seems to be well known within the industry,

NHTSA complaint #11112400
Apr 5, 2018steeringCrash1 injured
Traveling on highway 101 at 65-70 miles per hour, one quarter of the way into a hard left hand turn, the steering rod to the right front wheel came loose without any impact or any other form of road hazard. The threaded end disengaged from the turnbuckle nut leaving me with absolutely no steering. The out of control truck traveled into a turn out, up a hill, and into a… Read more

Traveling on highway 101 at 65-70 miles per hour, one quarter of the way into a hard left hand turn, the steering rod to the right front wheel came loose without any impact or any other form of road hazard. The threaded end disengaged from the turnbuckle nut leaving me with absolutely no steering. The out of control truck traveled into a turn out, up a hill, and into a ditch. The anti skid #2 kicked in, reducing my brakes, making the terrain eventually stop the truck. It was approximately 400 feet of travel after leaving the highway. Fiat-chrysler was contacted (cair # [xxx]) and they sent an investigator (bosch automotive service solutions) who took photographs and documentation after viewing the truck. I was not allowed to review the report. Then, fiat-chrysler respectfully declined any assistance associated with this matter. I have been informed that although the parts involved were under warranty, my warranty has been voided with no explanation. They suggested I turn it over to my insurance carrier, which has also declined to cover the damages. As of today, april 5 2018, my truck still sits at sports chrysler jeep dodge, as no entity has assumed responsibility or aided me in any way in fixing the truck or explaining the cause of the failure. *dsy see also odi 11053917. *dsy *cn *dt *dt information redacted pursuant to the freedom of information act (foia), 5 u.s.c. 552(b)(6). *tr updated 10/17/18*jb update 10/9/18 *dt *tr updated 10/31/18*jb

NHTSA complaint #11083519
Dec 11, 2017steering, seat beltsCrash1 injured
Tl* the contact owns a 2015 Ram 2500. While driving 65 MPH, the steering did not respond even when the steering column was moved. As a result, the vehicle drove into a ditch. The seat belts failed to tighten and the contact sustained bruises. A police report was filed and there was one injury that required medical attention. The vehicle was towed to sport chrysler dodge jeep… Read more

Tl* the contact owns a 2015 Ram 2500. While driving 65 MPH, the steering did not respond even when the steering column was moved. As a result, the vehicle drove into a ditch. The seat belts failed to tighten and the contact sustained bruises. A police report was filed and there was one injury that required medical attention. The vehicle was towed to sport chrysler dodge jeep (200 echestnut st, ft bragg, ca), but the failure was not diagnosed. The manufacturer was notified of the failure. The failure mileage was approximately 18,000. See also odi 11083519. *dsy

NHTSA complaint #11053917
Nov 22, 2017steering, structure
Tl* the contact owns a 2015 Ram 2500. While driving, the bracket attached to the track bar failed unexpectedly. While driving 55 MPH, the contact turned right and the steering failed. The vehicle became unstable and the wheel shook. The contact heard an abnormal noise when the failure occurred. The vehicle became unstable, but was still operable. There were no warning… Read more

Tl* the contact owns a 2015 Ram 2500. While driving, the bracket attached to the track bar failed unexpectedly. While driving 55 MPH, the contact turned right and the steering failed. The vehicle became unstable and the wheel shook. The contact heard an abnormal noise when the failure occurred. The vehicle became unstable, but was still operable. There were no warning indicators illuminated at the time of the failure. The contact drove the vehicle to verger chrysler jeep dodge (1400 ocean boulevard, coos bay, or 97420, (541) 888-5594) where it was diagnosed that the vehicle needed welding for the bracket on the frame. The vehicle was not covered under a warranty and the contact was informed to cover all expenses. The manufacturer was contacted, but could not assist because there were no open recalls. The failure mileage was 23,998.

NHTSA complaint #11048024
Sep 24, 2016steering

Was lubricating front driveshaft fittings had noticed a looseness in front end when hitting bumps in roads. Found nuts on draglink finger loose could turn with fingers and entire sleeve was loose. Will take to dealer this week 11k miles on vehicle 13 months old. Totally unacceptable for a critical steering component.

NHTSA complaint #10909458
Sep 23, 2016steering, wheels
Tl* the contact owns a 2015 Ram 2500. While driving 35 MPH and encountering a change in elevation or a dip in the road, the driver side wheel became inoperable and unsteady. The dealer diagnosed that the steering stabilizer failed. The vehicle was taken for a second opinion, but the failure was unable to be duplicated. The vehicle was not repaired. The manufacturer was made… Read more

Tl* the contact owns a 2015 Ram 2500. While driving 35 MPH and encountering a change in elevation or a dip in the road, the driver side wheel became inoperable and unsteady. The dealer diagnosed that the steering stabilizer failed. The vehicle was taken for a second opinion, but the failure was unable to be duplicated. The vehicle was not repaired. The manufacturer was made aware of the failure. The failure mileage was 26,000.

NHTSA complaint #10908870
Aug 29, 2016steering, unknown or other
Purchased from dodge new 06/2015, all stock no modifications. Started noticing shaking, drifting while at hwy speeds above approx. 55mph at approx. 20,000 odometer miles. Had tires rotated every 10000 but started noticing wear & cupping on outside edges. I was going to have its first alignment done today because of the tire wear which is now semi extreme at 40000 odometer… Read more

Purchased from dodge new 06/2015, all stock no modifications. Started noticing shaking, drifting while at hwy speeds above approx. 55mph at approx. 20,000 odometer miles. Had tires rotated every 10000 but started noticing wear & cupping on outside edges. I was going to have its first alignment done today because of the tire wear which is now semi extreme at 40000 odometer miles. Looked under truck just today 08/29/2016 for anything loose & found center drag link & both nuts on drag link were loose and spinning freely. There were blue lines on nuts and adjustment rod. I found out that this is a well known safety issue on Ram trucks for years. I think there's more wrong than just this item though. My wife & grandson ride me with me constantly and to think they could've been hurt angers me badly. This truck will be sold asap and I will never buy another Ram because I see they do not care about safety!

NHTSA complaint #10899216
Jun 26, 2016steering
While driving at highway speeds (usually over 55 MPH) I hit a bump and the front end started wheel hopping violently. It threw me out of my lane and when I hit the brakes I was bounced off the road and on to the shoulder. Thank god no one was beside me as it would have caused a major wreck or worse. Very dangerous situation. Now im afraid to drive the truck on the highway… Read more

While driving at highway speeds (usually over 55 MPH) I hit a bump and the front end started wheel hopping violently. It threw me out of my lane and when I hit the brakes I was bounced off the road and on to the shoulder. Thank god no one was beside me as it would have caused a major wreck or worse. Very dangerous situation. Now im afraid to drive the truck on the highway again. Cant believe there is not a recall out on this as it seems pretty popular on the internet. Search "dodge death wobble"...

NHTSA complaint #10876705
May 11, 2016steering

After getting an alignment done at the local dealership due to my steering wheel not sitting straight after less than one year of ownership; my steering control rod almost fell apart while driving due to inadequate tightening of the locking nuts.

NHTSA complaint #10864460
Feb 22, 2016steering

The nuts securing the drag link adjustment sleeve worked loose. Because I read about this problem on the internet, I caught it during an inspection before it caused any problems. I do not know how many miles I drove with it in this condition. I noticed that the adjusting sleeve is a very loose fit on the small threads of the drag link bars. I believe the sloppy fit is the root cause of the nuts backing loose.

NHTSA complaint #10837556
Nov 23, 2015steering, service brakes

Tl* the contact owns a 2015 dodge Ram 2500. While driving 3 MPH while making a left turn into the driveway, the steering wheel seized and the brakes failed. The vehicle was taken to a dealer where it was not diagnosed or repaired. The manufacturer was made aware of the failure. The approximate failure mileage was 200,021.

NHTSA complaint #10806176
Nov 17, 2015steering

Steering drag link adjuster is completely loose. Paint marks indicate where it was supposed to be tightened too, but either it was not tightened to torque spec or torque spec is not high enough. I suspect it was hand tightened. Please see numerous similar reports online here: http://www.cumminsforum.com/forum/2013-general-discussion/1813273-warning-check-your-steering-now.html

NHTSA complaint #10794446
← All 2015 Ram 2500 problems & recalls