CarProblemsDB

2014 Ram 2500 suspension problems

37 owners reported suspension problems — 11% of all 345 complaints about the 2014 Ram 2500.

Suspension complaints by Ram 2500 year

20251
20241
20231
202210
20211
20201
20193
201822
201716
201612
20159
201437
201323
201222
201137
20094

What owners report

Mar 4, 2026steering, suspension
On 5/28/2019 recall v06 was completed on my 2014 dodge Ram 2500. As part of that repair the adjustment nuts on the steering drag link were welded to prevent loosening and potential separation. On 3/3/2026 I had new front suspension components installed by les schwab tire center. During that service the technician advised a wheel alignment could not be performed because the… Read more

On 5/28/2019 recall v06 was completed on my 2014 dodge Ram 2500. As part of that repair the adjustment nuts on the steering drag link were welded to prevent loosening and potential separation. On 3/3/2026 I had new front suspension components installed by les schwab tire center. During that service the technician advised a wheel alignment could not be performed because the welded drag link nuts prevented the steering linkage from being adjusted. Alignment is normally required after front suspension work and necessary for proper steering geometry. Les schwab advised that grinding the welds off the drag link to perform the alignment and then rewelding the component would be unsafe because it could introduce hidden stress or cracking in the steering component. They recommended replacing the drag link with a moog ds801538a redesigned component. The drag link had to be replaced to restore normal steering adjustment and allow the vehicle to be properly aligned. On 3/3/2026 I requested reimbursement from dodge/chrysler for the drag link replacement required due to the recall repair. The request was denied. On 3/4/2026 chrysler representatives acknowledged the welded drag link rendered the vehicle unserviceable for alignment yet still denied reimbursement. Chrysler’s vehicle alignment clarification letter states that after the recall repair, owners should still be able to obtain an alignment using an approved procedure. In my case, however, the welded drag link prevented any adju

NHTSA complaint #11722016
Sep 4, 2025steering, suspension, unknown or other
I took my 2014 dodge Ram 2500 (VIN: [xxx] ) to glendora chrysler dodge jeep Ram on lone hill ave. For recall r46. The dealership kept my truck most of the day but did not perform the recall. Instead, they told me something untrue—that my upgraded suspension made the repair impossible—without ever attempting the repair. They then tried to pressure me into signing a waiver of… Read more

I took my 2014 dodge Ram 2500 (VIN: [xxx] ) to glendora chrysler dodge jeep Ram on lone hill ave. For recall r46. The dealership kept my truck most of the day but did not perform the recall. Instead, they told me something untrue—that my upgraded suspension made the repair impossible—without ever attempting the repair. They then tried to pressure me into signing a waiver of liability stating the recall could not be performed and gave me the runaround when I refused. This dealership was unwilling to help me and misled me instead of completing a federally mandated safety recall. Information redacted pursuant to the freedom of information act (foia), 5 u.s.c. 552(b)(6)

NHTSA complaint #11684945
Feb 16, 2024steering, suspension
The front suspension track bar frame bracket r46/NHTSA 15v-541. There was a recall issued in 2016 that impacted around an estimated 150,000+ vehicles. I purchased my truck in 2020, and according to records this problem was fixed in 2016. I recently noticed something seriously wrong with the front suspension while driving, and just about lost control of my vehicle on the… Read more

The front suspension track bar frame bracket r46/NHTSA 15v-541. There was a recall issued in 2016 that impacted around an estimated 150,000+ vehicles. I purchased my truck in 2020, and according to records this problem was fixed in 2016. I recently noticed something seriously wrong with the front suspension while driving, and just about lost control of my vehicle on the highway. After taking it to a certified maintenance technician for dodge Ram, they found that the recall was not completed at all. This problem involves faulty welding and the weld can break loose at any given moment without being fixed properly with a stability bracket. Mine gave loose on the highway going 70mph. My concern is how many other vehicles were marked as fixed, but in actuality were not.

NHTSA complaint #11572281
Nov 10, 2023suspension, forward collision avoidance

Death wobble at 45 and 74 MPH. Driving on freeway and vehicle begins to shake violently: has been a problem with other year models in the past after researching. Very dangerous on busy freeways.

NHTSA complaint #11554511
Oct 20, 2023steering, suspension, wheels
On the night of september 15, 2023, I was driving home from work around 8:00 pm. I hit a bump on the interstate and my truck started the "death wobble". Having driven a dodge truck for a very long time, I was aware of what was going on. The vehicle starts to "wobble" uncontrollably until you come to a complete stop. I was doing 70 MPH and in the left lane when this happened,… Read more

On the night of september 15, 2023, I was driving home from work around 8:00 pm. I hit a bump on the interstate and my truck started the "death wobble". Having driven a dodge truck for a very long time, I was aware of what was going on. The vehicle starts to "wobble" uncontrollably until you come to a complete stop. I was doing 70 MPH and in the left lane when this happened, it immediately pulled me to the ditch in the right lane on the side of the interstate. I researched the problem and found that it had an r46 recall and the bracket in said recall had been ripped from the frame and broken in half. I hauled the vehicle to jeff wilson chrysler in brookhaven and they sent pictures to whomever for the recall and it was denied for some reason. The service manager then sent it to someone else because he thought that it should have been fixed based off what he has seen. I then called 1-800-992-1997 to speak with someone about my issues and they proceeded to tell me that my recall had already been fixed. When I or mr. Shane at jeff wilson types it in, it clearly states the r46 recall has not been fixed. There is nothing on this bar or bracket that has been done. This bracket breaking almost caused me to wreck and I cant get any help in getting it resolved. Mr. Shane at jeff wilson in brookhaven has been nothing but fantastic in this matter and continues to try and help me get it resolved with no help coming from anyone above the dealership. The vehicle is undrivable and has been

NHTSA complaint #11551128
Feb 8, 2021steering, suspension, structure
I have a 2014 dodge ram2500 truck, there was a safety recall on the welding on the front suspension track bar frame bracket that was improperly welded during the manufacturing process. The fix was to have a bracket placed with one 60-70mm long m10 bolt with 1.5 pitch threads, one m10x1.5 pitch thread nut, three m10 flat washers I brought my truck in because it start popping… Read more

I have a 2014 dodge ram2500 truck, there was a safety recall on the welding on the front suspension track bar frame bracket that was improperly welded during the manufacturing process. The fix was to have a bracket placed with one 60-70mm long m10 bolt with 1.5 pitch threads, one m10x1.5 pitch thread nut, three m10 flat washers I brought my truck in because it start popping every time in turned either right or left I was told that the recall fix had expired there no warranty on this to fix it now. So I'm confused it a safety issue and not covered under the recall?? Because the recall fix has no warranty the warranty is only for 2 years. So I bought a truck new with defects and it my problem that we're not known at the time from the manufacture. Not sure how this is right or fair to the customer. It a safety issue not cosmetic. My truck only has 80.000 and it a diesel should last a long time. Please help thank you

NHTSA complaint #11395319
Nov 26, 2020suspension

While driving my vehicle down the highway I had a bump/pot hole and started getting what is described as death wobble in the front end. I have had the recall done on some steering components. Not sure what they were. This is happened to me at least three times in the last month. I took it to a repair shop they looked at the front end/steering components and says they cannot find anything wrong.

NHTSA complaint #11376466
Sep 29, 2020suspension
Alignment recall performed on time, but damage done to front right tire from the recall. Alignment couldn't be done by a shop and took it to a dealer who re-did the work and charged $2000. Search indicates that chrysler Ram company did a temporary fix in the recall which caused the problem. I should get a refund for the work they had to do to fix the original recall… Read more

Alignment recall performed on time, but damage done to front right tire from the recall. Alignment couldn't be done by a shop and took it to a dealer who re-did the work and charged $2000. Search indicates that chrysler Ram company did a temporary fix in the recall which caused the problem. I should get a refund for the work they had to do to fix the original recall ($2000)*dt*dt*dt*jb consumer stated recall was corrected on time.*jb*dt*jb

NHTSA complaint #11361761
Jan 8, 2020suspension, power train, engine
Started up my truck to go to town, engine came on about 5 min in the drive so I took it straight to o'reillys where they did the scan and the computer said misfire in cylinder 3. So we changed the spark plugs and took it back to reset the light, started it back up and light came on again with same explanation. So we parked the vehicle until we could find what was going on,… Read more

Started up my truck to go to town, engine came on about 5 min in the drive so I took it straight to o'reillys where they did the scan and the computer said misfire in cylinder 3. So we changed the spark plugs and took it back to reset the light, started it back up and light came on again with same explanation. So we parked the vehicle until we could find what was going on, talked to a mechanic and he said probably the cam/lifter problem, he looked at the vehicle seen I had a dropped valve seat(very odd for just starting up a vehicle) so we called dodge and they insisted they had to diagnosis it so we paid a towing company to haul it to them. Dodge called me back and said dropped valve seat but also cam/lifters need replaced. I dont see how dodge can just say it's on you to fix with this many vehicle owners all having the same problem. This is expensive fixes but not only that I have a truck with a loan payment that I cannot drive till it's fixed.

NHTSA complaint #11297893
Dec 5, 2019suspension
Tl* the contact owns a 2014 Ram 2500 diesel. The contact discovered that the front passenger side shock absorber tower was not fully welded. The failure caused the alignment to shift and wear out both passenger side tires prematurely. The weld was discovered to be fractured when the vehicle was taken to desert sun espanola (517 n riverside dr, santa cruz, nm 87567, (505)… Read more

Tl* the contact owns a 2014 Ram 2500 diesel. The contact discovered that the front passenger side shock absorber tower was not fully welded. The failure caused the alignment to shift and wear out both passenger side tires prematurely. The weld was discovered to be fractured when the vehicle was taken to desert sun espanola (517 n riverside dr, santa cruz, nm 87567, (505) 747-8100). The dealer stated that there was no recall on the vehicle and they could not touch or repair the vehicle despite it having bumper to bumper warranty coverage. The vehicle was not repaired. The contact stated that he would repair the vehicle himself. The manufacturer stated that they could not assist and referred the contact to NHTSA. The failure mileage was 70,000. The VIN was unknown.*dt*jb

NHTSA complaint #11287104
Oct 21, 2019suspension, vehicle speed control

The cruise control on the vehicle doest work. It seems to be something wrong with the system, because it starts to somewhat work when I reboot the system to factory settings. After a while, the system just stops working. I guess that this is something a lot of people go through, since there's tons of youtube videos about people trying to fix it.

NHTSA complaint #11269823
Apr 3, 2019steering, suspension

Bad vibrations at highway speeds. Dealer has replaced tires, did not fix. Dealership changed track bar, did not fix the issue. I also paid for alignment before track bar install. Seems to be a reoccurring problem with Ram trucks, please help make this right. 73000 miles

NHTSA complaint #11193731
Nov 13, 2018suspension

On 9-4-18 took my Ram 2500 in to the chrysler dealership in lowell, michigan for the recall r46/NHTSA 15v-541. They indicated they did not have the parts to do the recall and would call when they were available. I checked with the dealership again on 10-4-18 and they said parts are still not available and they did not know when they would be available.

NHTSA complaint #11151307
Sep 28, 2018suspension

Weld failed holding the front right spring tower bracket to frame rail

NHTSA complaint #11132138
Feb 16, 2018steering, suspension

Recall Ram # r46 / NHTSA 15v-541 service originally performed in 2015. After service loud popping noise came from front end when turning and hitting a bump. Second service in may 2017 eliminated noises. Found anti-sway bar not connected in feb 2018.

NHTSA complaint #11073224
Mar 31, 2017suspension

The vehicle shakes at highway speeds . I just replaces all 4 tires .

NHTSA complaint #10969699
Mar 23, 2017suspension, wheels
Tire pressure monitoring system light keeps going off for the right rear wheel will keep showing no air pressure. This is a intermittent problem. It has been in the dealership now close to 10 days in the last 7 months and the problem has been going on a year now. It started happening after a recall onot the truck was performed. The ball jointso on the truck was replaced… Read more

Tire pressure monitoring system light keeps going off for the right rear wheel will keep showing no air pressure. This is a intermittent problem. It has been in the dealership now close to 10 days in the last 7 months and the problem has been going on a year now. It started happening after a recall onot the truck was performed. The ball jointso on the truck was replaced about a year ago and in september when I took it to the dealership for work in told them they were bad and check it out.and nothing was done. It is at the dealership as I write this and I let them know thethat were bad again there is clunking when you jack the truck up and push on the tire. Also vibration when driven. Both of these problems are a safety issues. These problems have been going on for way to long and life of the ball joint should be longer then 4-5 months.

NHTSA complaint #10967922
Jan 24, 2017suspension
Tl* the contact owns a 2014 Ram 2500. While driving under 10 MPH and turning right or left, there was a clunking noise from the front suspension and excessive wear on the tires. The vehicle was taken to an independent mechanic where it was diagnosed that the upper and lower ball joints needed to be replaced to pass inspection. The vehicle was not repaired because the dealer… Read more

Tl* the contact owns a 2014 Ram 2500. While driving under 10 MPH and turning right or left, there was a clunking noise from the front suspension and excessive wear on the tires. The vehicle was taken to an independent mechanic where it was diagnosed that the upper and lower ball joints needed to be replaced to pass inspection. The vehicle was not repaired because the dealer stated that the ball joints were in specification. The manufacturer was notified of the failure. The approximate failure mileage was 30,000.

NHTSA complaint #10947444
Oct 19, 2016suspension, structure
Our 2014 dodge Ram 2500 was turned in on 8/10/16 to our local dealership for repair work on the safety recall r46. After finding two cracks on the track bar brackets after initial inspection, our local dealership did not follow the proper recall instructions for repair work by failing to dispatch chrysler's welding team to their dealership first and instead used non-certified… Read more

Our 2014 dodge Ram 2500 was turned in on 8/10/16 to our local dealership for repair work on the safety recall r46. After finding two cracks on the track bar brackets after initial inspection, our local dealership did not follow the proper recall instructions for repair work by failing to dispatch chrysler's welding team to their dealership first and instead used non-certified chrysler welders to make the recall repairs to our vehicle instead. Our local dealership initially asked us to sign a waiver releasing them of any wrong doing in order to get our vehicle back sooner (we declined). Once the chrysler welding team was notified and become involved with the local dealerships error they deemed the other non chrysler certified welders work unsatisfactory and therefore they would not stand behind the work that was handled by the local dealership. The local dealership admitted to their error and as a result were told to start over and replace the entire frame to our vehicle at the local dealerships expense before moving forward. To date, our vehicle has been in their possession for over 70 days and outside from them giving us two different loaner vehicles and the complete run around - we still have not received any documentation, official paperwork, or details with explanation of the exact repairs or work the dealership/corporate chrysler has done or showing what changes have been made to our vehicle despite our repeated requests, nor if our vehicle will be deemed safe again or

NHTSA complaint #10917344
Sep 6, 2016suspension, air bags, seat belts
Three active recalls on vehicle that dealer will not fix due to travel required. Vehicle is in remote alaskan village. Dealer wants us to ship the vehicle to anchorage at our cost. Cost to ship vehicle to and from village will cost us over $6000. Cost for dealer to fly a mechanic to village is about $600. Recalls are: NHTSA recall number: 15v-459 recall date:… Read more

Three active recalls on vehicle that dealer will not fix due to travel required. Vehicle is in remote alaskan village. Dealer wants us to ship the vehicle to anchorage at our cost. Cost to ship vehicle to and from village will cost us over $6000. Cost for dealer to fly a mechanic to village is about $600. Recalls are: NHTSA recall number: 15v-459 recall date: september 4, 2015 manufacturer recall number: r36 NHTSA recall number: 15v-460 recall date: august 21, 2015 manufacturer recall number: r23 NHTSA recall number: 15v-541 recall date: october 2, 2015 manufacturer recall number: r46 local dealer is: anchorage chrysler dodge 2601 e. 5th avenue anchorage, ak 99501

NHTSA complaint #10903876
← All 2014 Ram 2500 problems & recalls