ABS module shut down causing truck to lose control. Now all drive train systems are locked out
2013 Ram 1500 speed control (cruise, throttle) problems
37 owners reported speed control (cruise, throttle) problems — 3% of all 1,283 complaints about the 2013 Ram 1500.
Speed control (cruise, throttle) complaints by Ram 1500 year
What owners report
My ABS, traction control, and brakes light illuminated while driving. I used an obd2 scanner to check for any alarms or issues and found out my ABS control module has an internal fault. The part has been discontinued and the replacement is on backorder for more than a year. The only fix I have been able to find is using third party repair or out having a refurbished part… Read more
My ABS, traction control, and brakes light illuminated while driving. I used an obd2 scanner to check for any alarms or issues and found out my ABS control module has an internal fault. The part has been discontinued and the replacement is on backorder for more than a year. The only fix I have been able to find is using third party repair or out having a refurbished part from anonymous sellers online with no guarantee of it working. This issue impacts the anti-lock braking system, the stability control, and cruise control functionality of my vehicle.
I was driving and slowing down to 45 MPH going through corrigan, tx on 59. The truck all the sudden accelerated pulling to the left, then all of a sudden slammed to the right and went over a curb. I had no steering control and my foot was all the way down on the brakes to try and stop. I'm lucky it didn't happen 20 min before when 75mph was speed limit. The a frame broke, ball… Read more
I was driving and slowing down to 45 MPH going through corrigan, tx on 59. The truck all the sudden accelerated pulling to the left, then all of a sudden slammed to the right and went over a curb. I had no steering control and my foot was all the way down on the brakes to try and stop. I'm lucky it didn't happen 20 min before when 75mph was speed limit. The a frame broke, ball joints, broke rack and pinion, cracked the weld that holds the a frame to the truck, and I'm not sure what else is broken yet. My rim and tire both need to be replaced. The aluminum broke straight across. This should not have happened and could have gotten me and others killed. I am getting the truck taken to dodge to find out what all broke and how much it is going to cost. I should not have to pay for this. This should never happen and it put me and everyone around me in danger. I am still a nervous wreck from this.
Tl* the contact owns a 2013 Ram 1500. The contact stated that the vehicle shifted out of park and crashed into another vehicle without warning. The vehicle was not parked on an incline. The air bags did not deploy. There were no injuries. A police report was not filed. The vehicle was damaged, but still driveable. The contact called fresno chrysler dodge jeep Ram at… Read more
Tl* the contact owns a 2013 Ram 1500. The contact stated that the vehicle shifted out of park and crashed into another vehicle without warning. The vehicle was not parked on an incline. The air bags did not deploy. There were no injuries. A police report was not filed. The vehicle was damaged, but still driveable. The contact called fresno chrysler dodge jeep Ram at 866-275-2896 (located at 6162 n blackstone ave, fresno, ca 93710) and was informed that there was no recall. The manufacturer was made aware of the failure and sent an inspector to investigate the failure. The contact was not provided a report of the investigation. The vehicle was not repaired. The failure mileage was approximately 70,000. *as 'parts of this document have been redacted to protect personally identifiable information pursuant to the freedom of information act (foia), 5 u.s.c. 552(b)(6).'*jb
I pulled into the driveway behind 2 parked cars. I stopped and put my truck in park and when I took my foot off the brake the truck revved up and went forward, I stepped on the brake to stop the truck, but the brakes failed to stop the truck from running into the 2 cars. As I kept pressing the brake the truck's engine was revving and the tires were burning rubber, I kept… Read more
I pulled into the driveway behind 2 parked cars. I stopped and put my truck in park and when I took my foot off the brake the truck revved up and went forward, I stepped on the brake to stop the truck, but the brakes failed to stop the truck from running into the 2 cars. As I kept pressing the brake the truck's engine was revving and the tires were burning rubber, I kept pressing the brake and the truck would not stop it was out of control. The truck rammed into both cars pushing one of them into the side of the neighbor's yard. All this happened while the truck was in park. I pulled back to reverse so I could get off the car and when I took my foot off the brake the truck continued revving this time going in reverse, again I kept pressing the brake, but the truck would not stop it was out of control. It went in a half circle going into the neighbor's front yard knocking down a 6 inch wall, some bushes and running into a tree. The truck stopped and turned off by itself after hitting the wall, the bushes and the tree. This incident caused a lot of damage and totaling one of the cars. I don't know what caused the truck to go forward while in park, the brakes not to work and the engine revving up. I believe the parts affected are the brakes, the power train and speed control.
Tl* the contact owns a 2013 Ram 1500. While driving 57 MPH, the accelerator pedal became stuck and would not release. The contact applied both feet in an attempt to depress the brake pedal and stop the vehicle. The contact stated that the vehicle would not stop accelerating and there was a complete loss of brake functionality. The contact managed to pull off the road and… Read more
Tl* the contact owns a 2013 Ram 1500. While driving 57 MPH, the accelerator pedal became stuck and would not release. The contact applied both feet in an attempt to depress the brake pedal and stop the vehicle. The contact stated that the vehicle would not stop accelerating and there was a complete loss of brake functionality. The contact managed to pull off the road and placed the vehicle in the park position. The contact smelled a burning odor and noticed smoke rising from underneath the vehicle. The vehicle was towed to bill marsh chrysler dodge and jeep (408 west miles road, kalkaska, michigan 49646, 231-258-9192) to be diagnosed, but there were no warning indicators illuminated or diagnostic trouble codes present. The manufacturer was made aware of the failure. The vehicle was not repaired. The failure mileage was approximately 137,000. *tt updated 10/9/18*jb
2013 Ram 1500. Consumer writes in regards to vehicle sudden acceleration. *smd see also odi 10809633. *dsy the consumer stated the vehicle suddenly accelerated upon putting the vehicle in drive. The vehicle ended up in boulders that were near the consumer's home. Updated 07/18/2017 *js
I was sitting in my truck in front of a convenience store for 20-30 minutes with the engine running while I caught up my texts and calls. When I got ready to leave I put my foot on the brake and put the vehicle in reverse. I glanced my mirrors and looked over my right shoulder and started to ease my foot off of the brake as I've done many times in the past. The next thing I… Read more
I was sitting in my truck in front of a convenience store for 20-30 minutes with the engine running while I caught up my texts and calls. When I got ready to leave I put my foot on the brake and put the vehicle in reverse. I glanced my mirrors and looked over my right shoulder and started to ease my foot off of the brake as I've done many times in the past. The next thing I know, I'm moving forward as if I had stomped on the accelerator and I crashed through the framing and glass of the store front. As I was penetrating the structure of the store I tried to put the vehicle into park and I was pushing on the brakes. Then the truck reverses and I realize I'm headed towards the gas pump and possibly other customers. All this time I was pushing on the brake and I would let off and hold them again. The engine was revving at what sounded to be the maximum then it would drop for just a bit and rev again. When I was headed for the gas pumps after leaving the building I pulled the vehicle shifter down to drive because it wouldn't go into park and I was in such a state of panic I hadn't thought to turn off the ignition. I was holding on for dear life to the steering wheel and letting go of it just didn't occur to me. After putting the vehicle into drive and running into the building for the second time, the engine dropped back to an idle and I put it into reverse and slowly backed out of the damaged storefront, put the truck into park and shut it off.I thought about it after it was ove