A ton of 2013 Ram 1500’s are having ABS module problems or needing repairs. Very unsafe to travel without it working properly. Unable to get a new part because mopar discontinued making them. For what reason? I think this is the exact reason. Something needs to be done about it. To many reports of ABS modules being broken or not working/ functioning properly. Mine is broke and can not find a replacement.
2013 Ram 1500 brakes problems
80 owners reported brakes problems — 6% of all 1,283 complaints about the 2013 Ram 1500.
Brakes complaints by Ram 1500 year
What owners report
The anti-lock braking system (ABS) and electronic stability/traction control system on my 2013 Ram 1500 have malfunctioned. The serious incident occurred when another vehicle pulled out in front of me and I had to brake hard. Dash immediately displayed the ABS and brake warning lights, the normal hydraulic brakes operated, but ABS did not activate. The wheels locked and the… Read more
The anti-lock braking system (ABS) and electronic stability/traction control system on my 2013 Ram 1500 have malfunctioned. The serious incident occurred when another vehicle pulled out in front of me and I had to brake hard. Dash immediately displayed the ABS and brake warning lights, the normal hydraulic brakes operated, but ABS did not activate. The wheels locked and the vehicle skidded sideways during the emergency stop, significantly reducing directional control and creating a significant risk of collision and rollover. Diagnostic scanning identified dtc c2200-49, indicating an internal electronic failure of the ABS control module. The problem has progressively worsened. The warnings now occur at normal temperatures and may appear immediately after ignition. The vehicle also displays “service integrated electronic brake system,” and traction control becomes unavailable. On another occasion, while accelerating on a dry road at approximately 70°f ambient temperature, I heard a click and felt a slight jerk immediately before the ABS/brake warning lights illuminated. The ABS control module is available for inspection upon request. The identified ABS control module is mopar part number 68196035aa. I have found that obtaining a new replacement module may be difficult because the original part appears to be discontinued/unavailable through normal oem sources. The failure has progressed from intermittent to persistent and has resulted in the actual loss of ABS, traction control,
I am receiving code c2200, and the ABS, brake, lights on confirmed by my local jeep, dodge, Ram dealership. The dealership wants to sell me aftermarket ABS module telling me it's a 50/50 chance of it working with electronic flush. All other ABS modules are on backorder with the current safety recall for 2019, 2021-2024 Ram 1500's.
ABS module shut down causing truck to lose control. Now all drive train systems are locked out
2013 ran 1500 with 120000 miles. Service anti-lock brake system advisory message. Truck will start but will not switch into gear.
Will driving in the rain my ABS brakes, traction control, and 4wheel drive went out all the sudden causing me to lose control crash into the back of the vehicle in front of me. There was no warning no sound just light everywhere and all the safety items that make me truck worth buying gone. I even spent extra money to have 4 wheel drive. After the accident I found out that… Read more
Will driving in the rain my ABS brakes, traction control, and 4wheel drive went out all the sudden causing me to lose control crash into the back of the vehicle in front of me. There was no warning no sound just light everywhere and all the safety items that make me truck worth buying gone. I even spent extra money to have 4 wheel drive. After the accident I found out that this is happening so often that the part to fix my brakes, traction control, and 4 wheel drive is 2 years out and now is no longer made. So now I’m supposed to drive a once 4 wheel drive truck that is now 2 wheel drive. It also no longer has ABS brakes just reqular brakes and no traction control so now everytime it rains no matter how fast I’m going I’m sliding all over the place. I bought this truck to have the vehicle that was able to pick daughter up and rain sleet or snow and now I have to use my fiance suv to pick her up even on sunny days. I whole reason to buy my truck is now gone. It’s literally a car that looks like a truck and it’s a car from the 80s before ABS was a thing
Dash light came on for ABS. Took my truck to a dodge dealership to be repaired plus other non urgent work to be done. On my way to taking it to the dealership, I started experiencing issues with braking and right before I arrived, braking meant pushing the brake pedal all the way to the floor, it also felt delayed. While checking in my truck with the service department, they… Read more
Dash light came on for ABS. Took my truck to a dodge dealership to be repaired plus other non urgent work to be done. On my way to taking it to the dealership, I started experiencing issues with braking and right before I arrived, braking meant pushing the brake pedal all the way to the floor, it also felt delayed. While checking in my truck with the service department, they mentioned some recalls that I needed done and they would take care of everything. Received a call later that everything was replaced except for ABS control. They said they didn't have one and would search for it. Week went by, I called and they said it was back ordered with no eta. It has been there since august 2025. My only vehicle. No warranty but I still owe 11k to the bank. I contacted Ram which sent me to contact stellantis. Explained everything in hopes they would provide a loaner or rental. This is their response. I understand your frustration. The stellantis rental reimbursement policy is a goodwill consideration. If the vehicle doesn't meet the guidelines the request is rejected. There is no exception, or appeal process. Let me know if you have any questions or further concerns. I replied, I am requesting exception review due to a manufacturer-controlled backorder of a safety-critical ABS component that has rendered the vehicle undrivable. This is the last communication I received which is from today 2/12. There is still no definite eta for the part at this time, but our parts team is still wo
A lot of the Ram and dodge vehicles are having the same problems and stellantis has failed over and over to recall the item!!!! And has not!! Did so I have a 2013 Ram 4x4 with only 90k miles on my truck this is the same problem I'm having stellantis has issued several major recalls for vehicles experiencing simultaneous illumination of the ABS, brake, and traction control… Read more
A lot of the Ram and dodge vehicles are having the same problems and stellantis has failed over and over to recall the item!!!! And has not!! Did so I have a 2013 Ram 4x4 with only 90k miles on my truck this is the same problem I'm having stellantis has issued several major recalls for vehicles experiencing simultaneous illumination of the ABS, brake, and traction control (ESC) lights. These issues typically stem from defective software or hardware within the anti-lock braking system (ABS) control module. Major recalls (2024–2026) Ram 1500 (2019, 2021–2024): nearly 1.5 million trucks were recalled worldwide due to a software malfunction in the ABS control module that can inadvertently disable the electronic stability control (ESC). Jeep grand cherokee & dodge durango (2018–2019): approximately 207,000 suvs were recalled because a brake control computer could falsely read brake pressure, disabling ABS/ESC and causing brake lights to stay on. All came on at the same time!!! Make them fix it!! Because it didn't show up on my VIN recall not to even talk about the new fuel system I had to pay for at 30k I got my truck brand new!!!
According to ferman dodge of new port richey, florida an electronic brake sensor is apparently an issue and my local dealer says they do not have a fix. Therefore, my cruise control, sway stability and my ABS brake lights are lit up all the time. Limiting the safety features of the vehicle.
The contact owns a 2013 Ram 1500. The contact stated that after starting the vehicle, the brake, ABS, and traction control warning lights illuminated and the message to "service ABS" was displayed. The contact stated that while driving at an undisclosed speed with the cruise control activated, the cruise control system failed to operate as intended. The vehicle was taken to a… Read more
The contact owns a 2013 Ram 1500. The contact stated that after starting the vehicle, the brake, ABS, and traction control warning lights illuminated and the message to "service ABS" was displayed. The contact stated that while driving at an undisclosed speed with the cruise control activated, the cruise control system failed to operate as intended. The vehicle was taken to a dealer where it was diagnosed and determined that the ABS control module had internal electronic failures and produced dtc: c2200-49. The contact was informed that the ABS control module needed to be replaced. The vehicle was not repaired due to parts being on back order. The manufacturer was notified of the failure. The failure mileage was approximately 128,000.
The contact owns a 2013 Ram 1500. The contact stated that upon starting the vehicle, the ABS warning light and the traction control warning light were illuminated. The “service now” message was displayed. The vehicle was taken to an independent mechanic who confirmed that the ABS control module, part number: 68210719ab; needed to be replaced. The vehicle was not repaired due… Read more
The contact owns a 2013 Ram 1500. The contact stated that upon starting the vehicle, the ABS warning light and the traction control warning light were illuminated. The “service now” message was displayed. The vehicle was taken to an independent mechanic who confirmed that the ABS control module, part number: 68210719ab; needed to be replaced. The vehicle was not repaired due to the part being on back order. The manufacturer was contacted and informed that the contact to get on a waiting list for the repair. The failure mileage was approximately 120,000.
The contact owns a 2013 Ram 1500. The contact stated that while her husband was driving at an undisclosed speed, the ABS warning light illuminated. The vehicle was taken to the dealer, where it was diagnosed and determined that the ABS module had failed. The vehicle then taken to an independent mechanic, who confirmed the ABS module failure. The vehicle was not repaired due to… Read more
The contact owns a 2013 Ram 1500. The contact stated that while her husband was driving at an undisclosed speed, the ABS warning light illuminated. The vehicle was taken to the dealer, where it was diagnosed and determined that the ABS module had failed. The vehicle then taken to an independent mechanic, who confirmed the ABS module failure. The vehicle was not repaired due to the cost and due to parts being on backorder. The contact stated that while her husband was driving at an undisclosed speed on a separate occasion, the steering wheel became difficult to turn. The vehicle was taken to an independent mechanic, where it was diagnosed and determined that the steering wheel had failed due to the ABS module failure. The vehicle was not repaired. The vehicle was no longer driven due to safety concerns. The manufacturer was made aware of the failure, but no assistance was provided. The failure mileage was approximately 58,000.
The ABS light, traction control light, parking brake light are on and the info center says “ service electronic brake/service ABS” I hooked up my obdii reader and get code “c2200-49 anti-lock brake module internal - internal electronic failure“ I have researched exhaustingly and this is a common problem and the part is no longer made. The safety of my truck is impacted and I… Read more
The ABS light, traction control light, parking brake light are on and the info center says “ service electronic brake/service ABS” I hooked up my obdii reader and get code “c2200-49 anti-lock brake module internal - internal electronic failure“ I have researched exhaustingly and this is a common problem and the part is no longer made. The safety of my truck is impacted and I cannot fix it. I have checked 3 fuses and verified they are good. Seeing as how this is a common problem with the 2013-2018 rams I feel this is something Ram needs to address.
My truck has an open n37 recall which affects the electronic stability control and causes the ESC light, service ABS system light and brake light symbols to illuminate, my local dealership has attempted to perform this safety recall however they have indicated they attempted to flash the software to the module but were unable to do so due to the defective/non communicating ABS… Read more
My truck has an open n37 recall which affects the electronic stability control and causes the ESC light, service ABS system light and brake light symbols to illuminate, my local dealership has attempted to perform this safety recall however they have indicated they attempted to flash the software to the module but were unable to do so due to the defective/non communicating ABS module. This is a crucial issue as the n37 recall rectifies issues with the electonic stability control on my truck which may inadvertently illuminate the ESC warning light and disable the ESC system as a result, loss of the ESC function could adversely affect the vehicles handling characteristics and cause a crash without warning. I have reached out to Ram customer care, but they are refusing to replace the defective module in order to cover the n37 recall indicating it's an out-of-pocket expense which is unreasonable. The n37 recall explicitly states the recall will cover parts and labor, the module isn't able to be flashed as the dealer's diagnostic machine isn't communicating with it, which is a hardware issue. Ram is refusing to comply and replace the ABS module in order to rectify the safety recall.
Component or system that failed / malfunctioned the brake system (pads, calipers, hydraulic fluid) failed three times in less than 90 days. The right-side tie rod end also separated from the steering assembly. Both components are available for inspection upon request. How safety was put at risk the brakes repeatedly lost all stopping power while driving, with the pedal going… Read more
Component or system that failed / malfunctioned the brake system (pads, calipers, hydraulic fluid) failed three times in less than 90 days. The right-side tie rod end also separated from the steering assembly. Both components are available for inspection upon request. How safety was put at risk the brakes repeatedly lost all stopping power while driving, with the pedal going to the floor and the reservoir emptying within minutes. On one occasion, the brake pads and caliper fell off the wheel assembly, confirmed by the dealer’s own shop manager. The tie rod failure caused uneven tire wear and a highway blowout, forcing an emergency tow. These issues placed me, my child, and other drivers at risk of a serious crash. Has the problem been reproduced or confirmed by a dealer or service center? Yes. Premier auto (the dealer’s affiliated garage) confirmed and attempted repairs three times. On the third visit, the shop manager (mike) stated that the brake pads were so low they had fallen off, causing the calipers to overextend and leak. Has the vehicle/component been inspected by others? Yes. Premier auto inspected and repaired the brakes multiple times. Dobbs tire & auto later inspected after the blowout and diagnosed additional electrical issues. Documentation, invoices, and photos are available. Were there warning lamps, messages, or other symptoms? The brake warning light illuminated and the pedal sank to the floor during failures. No prior warning lamps appeared before the t
My ABS, traction control, and brakes light illuminated while driving. I used an obd2 scanner to check for any alarms or issues and found out my ABS control module has an internal fault. The part has been discontinued and the replacement is on backorder for more than a year. The only fix I have been able to find is using third party repair or out having a refurbished part… Read more
My ABS, traction control, and brakes light illuminated while driving. I used an obd2 scanner to check for any alarms or issues and found out my ABS control module has an internal fault. The part has been discontinued and the replacement is on backorder for more than a year. The only fix I have been able to find is using third party repair or out having a refurbished part from anonymous sellers online with no guarantee of it working. This issue impacts the anti-lock braking system, the stability control, and cruise control functionality of my vehicle.
Front brakes: on july 30 2025 the right front brakes caused the truck to pull and shimmy to the right at speed. Touch the brake and it pulled hard to the right so bad you had to turn the steering wheel to about the ten o’clock position to go straight then when letting off the brakes you had to be quick to turn the other way. Seems the brakes are not releasing after use and… Read more
Front brakes: on july 30 2025 the right front brakes caused the truck to pull and shimmy to the right at speed. Touch the brake and it pulled hard to the right so bad you had to turn the steering wheel to about the ten o’clock position to go straight then when letting off the brakes you had to be quick to turn the other way. Seems the brakes are not releasing after use and over heating, I had a laser temp over *450 in the wheel and hub area. This happened last year to the driver’s side and I had to replace the brake assembly on that side. Maybe the tolerances in each piston is to close so when hot they stick and over heat. This is on a truck with 17k miles. On forum’s people suggest that the brake lines are collapsing which might be the issue. This model truck has the air ride suspension so the overheating could cause a air bladder to blow or a bearing to degrease with a wheel lock up at speed. Thanks,,
The contact owns a 2013 Ram 1500. The contact stated they received notification of NHTSA campaign numbers: 19v347000 (latches/locks/linkages) and 17v821000 (power train); also the contact stated that the ABS warning light was blinking, and the engine light was illuminated however, the parts to do the recall repairs were not yet available. The local dealer was contacted and the… Read more
The contact owns a 2013 Ram 1500. The contact stated they received notification of NHTSA campaign numbers: 19v347000 (latches/locks/linkages) and 17v821000 (power train); also the contact stated that the ABS warning light was blinking, and the engine light was illuminated however, the parts to do the recall repairs were not yet available. The local dealer was contacted and the dealer declined to service the vehicle. The vehicle was not diagnosed or repaired. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was made aware of the issue. The manufacturer referred the contact to another local dealer and opened a case. The failure mileage was approximately 88,000.
I was driving the beltway when out of nowhere my ABS, brake, and traction control lights came on. Of course I immediately panicked and then had to slam my brakes on which no longer worked and caused me to slide. Luckily I was able to pull to the side. This is my only vehicle and the wait list for a new ABS module is insane. How am I supposed to drive specifically with my kid in the car.
The contact owns a 2013 dodge Ram 1500. The contact stated that while coasting to an idle stop at a red light, the anti-lock braking system (ABS) warning light illuminated. The vehicle was taken to the dealer, who diagnosed that the ABS module had failed. The dealer still had not received the part due to the part being on back order. After having the vehicle diagnosed while… Read more
The contact owns a 2013 dodge Ram 1500. The contact stated that while coasting to an idle stop at a red light, the anti-lock braking system (ABS) warning light illuminated. The vehicle was taken to the dealer, who diagnosed that the ABS module had failed. The dealer still had not received the part due to the part being on back order. After having the vehicle diagnosed while driving approximately 75 MPH, and coming to slowed traffic, the contact attempted to decelerate. Suddenly, another vehicle cut in front of them, and the contact slammed the brake pedal down. The left front tire seized, causing the vehicle to spin counterclockwise. The left front side of the truck hit a nearby guardrail. The vehicle continued to spin, causing damage to the front-end and rear-end. The air bag did not deploy. The contact was able to maneuver the vehicle to safety. The contact was able to continue driving after restarting the vehicle at their home. There were no injuries. No medical attention was needed. No police report was filed. The vehicle was not taken to the dealer after the incident occurred. The manufacturer was not made aware of the failure. The failure mileage was unknown.
Driving down the road and ABS, srs and traction control light came on at the stop sign after that brake pedal pulsating during a normal stop on dry pavement was told it was the ABS control module
The contact owns a 2013 Ram 1500. The contact stated while driving 60-65 MPH, the ABS, the brakes, and the traction control warning lights were illuminated. Additionally, the contact stated that the vehicle failed to accelerate as needed while depressing the accelerator pedal and the vehicle was driving sluggishly. The contact stated that the failure caused the transmission… Read more
The contact owns a 2013 Ram 1500. The contact stated while driving 60-65 MPH, the ABS, the brakes, and the traction control warning lights were illuminated. Additionally, the contact stated that the vehicle failed to accelerate as needed while depressing the accelerator pedal and the vehicle was driving sluggishly. The contact stated that the failure caused the transmission and the engine to overheat. The vehicle was taken to the dealer where it was diagnosed and determined that the ABS module and sensor needed to be replaced; however, the parts were on backorder. The vehicle was not repaired. The manufacturer was not notified of the failure. The failure mileage was approximately 200,393.
Electronic power steering has completely stopped all at once. 102000 miles on the truck. It’s also had an issue with the ABS brake system.
My truck for several years has intermittently turned off all safety features and steering control, I.e. Air bags, traction control, anti lock breaks, and power steering all turn off randomly which in turn disables the cruise control, towing functions, etc. In the past I could turn the truck off then back on and the problems would dissappear, now the problem has escalated and… Read more
My truck for several years has intermittently turned off all safety features and steering control, I.e. Air bags, traction control, anti lock breaks, and power steering all turn off randomly which in turn disables the cruise control, towing functions, etc. In the past I could turn the truck off then back on and the problems would dissappear, now the problem has escalated and is occurring at shorter intervals now turning it off doesn't work and its getting dangerous. There is various recalls for these problems with same make and years model trucks, but mine is not included. I've tried contacting the dealer but they basically say sorry we can't help you unless your truck is added to the recall list. It's just not right that 1000's of vehicles the exact same as mine have been recalled for the exact same problems but not mine. Thanks for your time!
My newly purchased vehicle was in the parked position, I took the key out of the car, the gearshift was hit and the vehicle rolled down my hill in my backyard, hit a tree and was totaled. The antilock brakes failed on me.
I pulled into the driveway behind 2 parked cars. I stopped and put my truck in park and when I took my foot off the brake the truck revved up and went forward, I stepped on the brake to stop the truck, but the brakes failed to stop the truck from running into the 2 cars. As I kept pressing the brake the truck's engine was revving and the tires were burning rubber, I kept… Read more
I pulled into the driveway behind 2 parked cars. I stopped and put my truck in park and when I took my foot off the brake the truck revved up and went forward, I stepped on the brake to stop the truck, but the brakes failed to stop the truck from running into the 2 cars. As I kept pressing the brake the truck's engine was revving and the tires were burning rubber, I kept pressing the brake and the truck would not stop it was out of control. The truck rammed into both cars pushing one of them into the side of the neighbor's yard. All this happened while the truck was in park. I pulled back to reverse so I could get off the car and when I took my foot off the brake the truck continued revving this time going in reverse, again I kept pressing the brake, but the truck would not stop it was out of control. It went in a half circle going into the neighbor's front yard knocking down a 6 inch wall, some bushes and running into a tree. The truck stopped and turned off by itself after hitting the wall, the bushes and the tree. This incident caused a lot of damage and totaling one of the cars. I don't know what caused the truck to go forward while in park, the brakes not to work and the engine revving up. I believe the parts affected are the brakes, the power train and speed control.
Tl* the contact owns a 2013 Ram 1500. While driving 57 MPH, the accelerator pedal became stuck and would not release. The contact applied both feet in an attempt to depress the brake pedal and stop the vehicle. The contact stated that the vehicle would not stop accelerating and there was a complete loss of brake functionality. The contact managed to pull off the road and… Read more
Tl* the contact owns a 2013 Ram 1500. While driving 57 MPH, the accelerator pedal became stuck and would not release. The contact applied both feet in an attempt to depress the brake pedal and stop the vehicle. The contact stated that the vehicle would not stop accelerating and there was a complete loss of brake functionality. The contact managed to pull off the road and placed the vehicle in the park position. The contact smelled a burning odor and noticed smoke rising from underneath the vehicle. The vehicle was towed to bill marsh chrysler dodge and jeep (408 west miles road, kalkaska, michigan 49646, 231-258-9192) to be diagnosed, but there were no warning indicators illuminated or diagnostic trouble codes present. The manufacturer was made aware of the failure. The vehicle was not repaired. The failure mileage was approximately 137,000. *tt updated 10/9/18*jb
Driving assistance features were rendered unavailable during a software update which I believe contributed to a collision. The vehicle was in motion on a highway when control was lost resulting in a crash.
Engine died at freeway speeds , ,taken to dealership 3 times, finally got it back , while driving on my way home it died again , could not stop until I hit cement culvert for water run off, damaging front bumper, had it towed to dealership where it sits now. The engine keeps shutting down without warning while driving on california freeways, big safety issue. *tr
I was sitting in my truck in front of a convenience store for 20-30 minutes with the engine running while I caught up my texts and calls. When I got ready to leave I put my foot on the brake and put the vehicle in reverse. I glanced my mirrors and looked over my right shoulder and started to ease my foot off of the brake as I've done many times in the past. The next thing I… Read more
I was sitting in my truck in front of a convenience store for 20-30 minutes with the engine running while I caught up my texts and calls. When I got ready to leave I put my foot on the brake and put the vehicle in reverse. I glanced my mirrors and looked over my right shoulder and started to ease my foot off of the brake as I've done many times in the past. The next thing I know, I'm moving forward as if I had stomped on the accelerator and I crashed through the framing and glass of the store front. As I was penetrating the structure of the store I tried to put the vehicle into park and I was pushing on the brakes. Then the truck reverses and I realize I'm headed towards the gas pump and possibly other customers. All this time I was pushing on the brake and I would let off and hold them again. The engine was revving at what sounded to be the maximum then it would drop for just a bit and rev again. When I was headed for the gas pumps after leaving the building I pulled the vehicle shifter down to drive because it wouldn't go into park and I was in such a state of panic I hadn't thought to turn off the ignition. I was holding on for dear life to the steering wheel and letting go of it just didn't occur to me. After putting the vehicle into drive and running into the building for the second time, the engine dropped back to an idle and I put it into reverse and slowly backed out of the damaged storefront, put the truck into park and shut it off.I thought about it after it was ove