Warning light came on suddenly. Vehicle lost power. Smoking out of the tail pipe. Very dangerous for other drivers. Took the vehicle to a mechanic, said I have problems with the lifters, and need to replace the engine. I don’t know why chrysler doesn’t issue a recall for this issue, it seems to happen often. Thank you very much.
2012 Ram 1500 speed control (cruise, throttle) problems
28 owners reported speed control (cruise, throttle) problems — 4% of all 698 complaints about the 2012 Ram 1500.
Speed control (cruise, throttle) complaints by Ram 1500 year
What owners report
The vehicle is making a loud clicking noise coming from the engine area. . It gets louder when accelerating. It is unknown to me if it could be manifold issues or camshaft issues. It feels unsafe to drive.
Malfunction of electronic stability control while in 4x4 driving in heavy snow. Almost hit a light pole, could have caused significant harm. Unknown. No. No precursors. Hit a pot hole while on the on ramp unloading the suspension and the truck started to yaw clockwise. Applied throttle to have front end pull truck straight. ESC applied brakes and chopped power inducing a… Read more
Malfunction of electronic stability control while in 4x4 driving in heavy snow. Almost hit a light pole, could have caused significant harm. Unknown. No. No precursors. Hit a pot hole while on the on ramp unloading the suspension and the truck started to yaw clockwise. Applied throttle to have front end pull truck straight. ESC applied brakes and chopped power inducing a significant yaw rate counterclockwise driving the rear of the truck into the hard snow bank perpendicular to vehicle travel. Another excessive clockwise yaw occurred at this time. No throttle control and brakes unresponsive. 1. Had the driver been allowed to retain throttle control upon initial yaw this was easily recoverable. 2. Anti-lock brakes, needed to be disabled so the truck could slide across the snow and not into the ditch when the second clockwise yaw started. 3. This caused minor body damage to the vehicle.
While driving the vehicle at 9:30pm on 7/22/22 the vehicle suddenly accelerated on its own at a very fast rate after I sped up to yield over into another lane coming off the highway. There was luckily no vehicles ahead of me and I was on a straight away or else I would’ve hit someone. I pressed the brakes down but they wouldn’t bring the vehicle to a stop. I placed the… Read more
While driving the vehicle at 9:30pm on 7/22/22 the vehicle suddenly accelerated on its own at a very fast rate after I sped up to yield over into another lane coming off the highway. There was luckily no vehicles ahead of me and I was on a straight away or else I would’ve hit someone. I pressed the brakes down but they wouldn’t bring the vehicle to a stop. I placed the transmission in neutral and it slowed down but soon as I put it back in drive it accelerated again. I went through this cycle 4 times then finally I gained control of the vehicle again. I have read online the dealer says it’s user error or floor mats. That was not the case at all. My floor mats are stock and have taps keeping them secure. This situation was very dangerous and if it happens again it could cause serious injury to me or someone else.
My airbag light came on and stayed on and my horn or cruise control does not work. Not sure if I got in an accident that my air bag would actually deploy.. Thinking it is a clock spring issue.. Had a recall on my 2011 wrangler and same thing was happening to that vehicle also..this happened right after I started the vehicle after work today.
In the morning while starting truck no problem, all of a sudden while driving on street the truck just turned off. It had happened before on 3 other occasions but the first one was far apart then the other 2 in the last 2 weeks. When I got on the freeway I noticed a had to push harder on the gas pedal to gain speed but it felt like it was hard to press on and I wasn't getting… Read more
In the morning while starting truck no problem, all of a sudden while driving on street the truck just turned off. It had happened before on 3 other occasions but the first one was far apart then the other 2 in the last 2 weeks. When I got on the freeway I noticed a had to push harder on the gas pedal to gain speed but it felt like it was hard to press on and I wasn't getting to the speed (60mph) so I just took it slowly to gain speed. That lasted about a week. The following week after trying to gain speed at about 45-50 MPH the truck started shaking really bad so I let go of the gas pedal and took it slow again. So I took it to my mechanic to get a basic tune up since I had just gotten an oil change he would just do spark plugs on3/5/20 to see if it would solve the problem. After explaining to him what it was doing he told me right away that it's probably the camshaft and hydraulic lifters worn out with my truck mileage of 108,000 it was unbelievable because I always make sure my truck is up to date with everything. By this time no check engine light had turned on. So I drove it another week and half with the same issues; finally on 3/16/20 the check engine light turned on and I took it to get it checked at autozone and oreilys and both computer finding were code p0385 which is a misfire on cylinder 5 which is hydraulic lifter, camshaft, and possible ignition coil gone bad. I decided to not use my truck until I took it to the mechanic which I did on 03/24/20. His finding w
Tl* the contact owns a 2012 Ram 1500. While driving 40 MPH, the accelerator pedal was depressed and became stuck. As a result, the contact crashed into a parked vehicle. There were no injuries and a police report was filed. The front passenger side bumper and headlights were damaged. The dealer and manufacturer were not contacted. The failure was not diagnosed. The failure mileage and VIN were unknown.
Tl* the contact owns a 2012 dodge Ram 1500. While the vehicle was in the park position, it accelerated independently and crashed into a building. The air bags failed to deploy. The vehicle was not diagnosed or repaired. There were no injuries and a police report was filed. The manufacturer was not notified of the failure. The VIN was not included in NHTSA campaign number:… Read more
Tl* the contact owns a 2012 dodge Ram 1500. While the vehicle was in the park position, it accelerated independently and crashed into a building. The air bags failed to deploy. The vehicle was not diagnosed or repaired. There were no injuries and a police report was filed. The manufacturer was not notified of the failure. The VIN was not included in NHTSA campaign number: 13v038000 (power train). The VIN was unavailable. The failure mileage was unknown.
Tl* the contact owns a 2012 dodge Ram 1500. The contact stated that he parked the vehicle and applied the parking brake however, the vehicle erroneously accelerated and crashed into a large body of water. The vehicle was destroyed. There were no injuries reported. The manufacturer was notified of the failure. The failure and current mileage was 14,500.