CarProblemsDB

2010 Mercury Milan brakes problems

107 owners reported brakes problems — 11% of all 1,003 complaints about the 2010 Mercury Milan.

Brakes complaints by Mercury Milan year

201112
2010107
2009118
2008199
2007127
200616

What owners report

Sep 24, 2025service brakes

The safety recall 19s54 is affecting my vehicle. It was made at the same plant at the approved date range as the other vehicles on the recall list but it seems my vehicle wasnt added to the list because it is a hybrid but it has the same exact issue as the non hybrid models

NHTSA complaint #11689311
Jul 7, 2025service brakes, hydraulic
The contact owns a 2010 Mercury Milan. The contact stated that while depressing the brake pedal to the floorboard, the vehicle failed to immediately stop. The vehicle was taken to the local brake service center, but the cause of the failure was not yet determined, and the vehicle was not yet repaired. The manufacturer was notified of the failure, but no assistance was offered.… Read more

The contact owns a 2010 Mercury Milan. The contact stated that while depressing the brake pedal to the floorboard, the vehicle failed to immediately stop. The vehicle was taken to the local brake service center, but the cause of the failure was not yet determined, and the vehicle was not yet repaired. The manufacturer was notified of the failure, but no assistance was offered. The contact was informed that the VIN was not included in the NHTSA campaign number: 19v904000 (service brakes, hydraulic). The contact stated that the vehicle had experienced the failure listed in the recall. The failure mileage was approximately 140,000.

NHTSA complaint #11671729
Jan 28, 2025service brakes
Whenever the car engine isn't warm and I slam on the brakes, they barely respond. I have replaced the master cylinder, ABS hydraulic module, brake booster, calipers, pads, and rotors, and it still has about 20% normal braking power when the engine is cold. Just got it back from the dealership again. Dealer said no vacuum leak found, no leaks found, ABS module checks out… Read more

Whenever the car engine isn't warm and I slam on the brakes, they barely respond. I have replaced the master cylinder, ABS hydraulic module, brake booster, calipers, pads, and rotors, and it still has about 20% normal braking power when the engine is cold. Just got it back from the dealership again. Dealer said no vacuum leak found, no leaks found, ABS module checks out fine, and said the check valve passed diagnostics. The problem remains. This has been ongoing for several years now. May have contributed to an accident in 2023. Not sure as my wife was driving. When the engine is warm, the brakes work perfectly.

NHTSA complaint #11639152
Oct 28, 2024service brakes, hydraulic
The contact owns a 2010 Mercury Milan. The contact stated that while operating the vehicle, the "check brake system" and "service advance track" messages remained displayed. The cause of the failure was not yet determined. The contact indicated that the failure had occurred days after the vehicle was repaired under NHTSA campaign number: 19v904000 (service brakes, hydraulic).… Read more

The contact owns a 2010 Mercury Milan. The contact stated that while operating the vehicle, the "check brake system" and "service advance track" messages remained displayed. The cause of the failure was not yet determined. The contact indicated that the failure had occurred days after the vehicle was repaired under NHTSA campaign number: 19v904000 (service brakes, hydraulic). The manufacturer and local dealer were notified of the failure. The failure mileage was 240,000.

NHTSA complaint #11622282
Jul 9, 2024service brakesCrash
My name is [xxx] and I own a 2010 Mercury Milan. I bought it on [xxx] from an 84 year old woman who take good care of it. It had 91,000 miles which were mostly hwy miles. She kept records of all her oil changes. After having it for almost 3 years and keeping up with it myself, on february 27,2024 in the morning I put brake fluid in the car. I had brake pads and rotors done on… Read more

My name is [xxx] and I own a 2010 Mercury Milan. I bought it on [xxx] from an 84 year old woman who take good care of it. It had 91,000 miles which were mostly hwy miles. She kept records of all her oil changes. After having it for almost 3 years and keeping up with it myself, on february 27,2024 in the morning I put brake fluid in the car. I had brake pads and rotors done on the car in august 2023. On the evening of [xxx], my son and I took a ride to the local 7/11 which is 5 minutes away. While driving home and coming to the traffic light at the beginning of my neighborhood the light turned red. As I proceeded to stop my foot went all the way to the ground and I had no brakes. I had to go through the light because I could not stop. The car was flying down the road because it is a very steep hill. I tried to pull the emergency brake and nothing happened. I was nearing the end of the road going 40 MPH due to the hill. I thought I was going to hit my neighbors house at the bottom of the hill. My son grabbed the steering wheel to turn it and I went up on my curb, across my lawn and crashed into a storage tent on my driveway. My car was wedged inside the tent which was filled with furniture and other belongings. I called ford corporation in reference to this recall from december 2019 for 2010 Mercury milans. Then I spoke with a ford dealership in smithtown where they were rude and said the car was 14 years old and I may have to pay if they didn't find my car was part of the rec

NHTSA complaint #11600649
May 23, 2024service brakes
On may 10, 2024, as I was rounding a sharp curve, I applied brakes to slow down, but there were no brakes. In fact the brake pedal went to the floor. I had to use emergency brake to stop and gain my wits. I turned around and slowly drove home (about 0.5 miles) and used e-brake to stop and park in front of house. On may 21 I had vehicle towed to dealer. They found that the… Read more

On may 10, 2024, as I was rounding a sharp curve, I applied brakes to slow down, but there were no brakes. In fact the brake pedal went to the floor. I had to use emergency brake to stop and gain my wits. I turned around and slowly drove home (about 0.5 miles) and used e-brake to stop and park in front of house. On may 21 I had vehicle towed to dealer. They found that the brake pedal was still against floorboard, but when they started vehicle, it came back up to normal position and was working fine. They could not duplicate the loss of brakes. My vehicle was manufactured within the date range of a tsb regarding hydraulic control unit and dot3 brake fluid corrosion, but dealer says VIN not applicable to tsb. I am thinking of paying for new hcu anyway, just for my family's protection. I would like my VIN to be included in tsb repair.

NHTSA complaint #11590317
Apr 11, 2024service brakes, hydraulic
The contact owns a 2010 Mercury Milan hybrid. The contact stated while his mother was driving approximately 30 MPH, the brake pedal was depressed and the pedal extended to the floorboard however, the vehicle did not immediately stop. During the failure, the ABS, traction control, and brake warning lights were illuminated. The vehicle was later towed to the local dealer who… Read more

The contact owns a 2010 Mercury Milan hybrid. The contact stated while his mother was driving approximately 30 MPH, the brake pedal was depressed and the pedal extended to the floorboard however, the vehicle did not immediately stop. During the failure, the ABS, traction control, and brake warning lights were illuminated. The vehicle was later towed to the local dealer who diagnosed that the hcu and ABS modules were faulty and needed to be replaced. The vehicle was not yet repaired. The contact was informed that the hcu module was no longer available from the manufacturer. The manufacturer was notified of the failure, but no assistance was offered. The contact was informed that the VIN was not included in NHTSA campaign number: 19v904000 (service brakes, hydraulic). The contact stated that the vehicle had experienced the failure listed in the recall. The failure mileage was 60,539.

NHTSA complaint #11582395
Jun 19, 2023service brakes

Power brake failure, brake pedal goes to the floor, vehicle rolls forward and backward while in park, ABS warning and trac system warning lights are on and also brake service warning light.

NHTSA complaint #11527715
Apr 15, 2023service brakes
The brake system went completely out. The brake pedal has no pressure and goes all the way to the floor. When looking online there are 197 complaints after reading through the first 9d all of them were about the ABS control module. All other repairs regarding to the brakes have already been made with the problem still not being fixed. There were no warning signs of this… Read more

The brake system went completely out. The brake pedal has no pressure and goes all the way to the floor. When looking online there are 197 complaints after reading through the first 9d all of them were about the ABS control module. All other repairs regarding to the brakes have already been made with the problem still not being fixed. There were no warning signs of this happening. The brake switch just went out when driving home one day. This has all been diagnosed by a private mechanic. The only thing left to change or repair is the ABS control module.

NHTSA complaint #11517196
Feb 21, 2023service brakes, forward collision avoidance
When starting to drive 2 days ago multiple braking warnings went off on the vehicle, including advance trac warnings. The vehicle became extremely difficult to stop, requiring high pressure on the pedal. It was able to be stopped safely as there was an empty parking lot nearby. It was taken to a ford dealership (tri-county ford) and diagnosed with a failure of the ABS control… Read more

When starting to drive 2 days ago multiple braking warnings went off on the vehicle, including advance trac warnings. The vehicle became extremely difficult to stop, requiring high pressure on the pedal. It was able to be stopped safely as there was an empty parking lot nearby. It was taken to a ford dealership (tri-county ford) and diagnosed with a failure of the ABS control module. The part was confirmed by the dealer to be the same as in NHTSA recall # 19v904000 (ford recall 19s54). Repair cost $1220, dealer advised calling ford. I then called ford who informed me that my specific VIN was not covered under the recall. There were no issues or warnings prior to this event. The worst part is that this is the second time such an serious incident has occurred with my vehicle which could have harmed or killed me or others. In 2019 the power steering failed spontaneously on the car while driving and again, the 2011 Milan hybrid was covered but not my specific 2010 VIN (I filed a separate NHTSA complaint and sent a letter to ford yet there were multiple reports prior, and multiple similar reports since then, sadly). I have now experienced two major safety events with the vehicle. Thankfully I was very fortunate to walk away from both (at a combined cost of $3000), yet these should have been corrected by ford and covered under recalls. I am an emergency medicine physician who takes care of people injured in motor vehicle accidents. Shame on you, ford and NHTSA for failing to corr

NHTSA complaint #11508394
Dec 14, 2022service brakes

I was driving and my hydrolic control unit failed

NHTSA complaint #11497473
Dec 1, 2022service brakes, hydraulic
The contact owns a 2010 Mercury Milan. The contact stated while driving at various speeds and depressing the brake pedal, the brake pedal only responded after being depressed further down to the floorboard. There was no warning light illuminated. The vehicle was taken to the used car dealer where the brake line was bled; however, the failure persisted. The dealer was not… Read more

The contact owns a 2010 Mercury Milan. The contact stated while driving at various speeds and depressing the brake pedal, the brake pedal only responded after being depressed further down to the floorboard. There was no warning light illuminated. The vehicle was taken to the used car dealer where the brake line was bled; however, the failure persisted. The dealer was not notified of the failure. The vehicle was not diagnosed or repaired. The manufacturer was notified of the failure and informed the contact that the vehicle could not be repaired under NHTSA campaign number: 19v904000 (service brakes, hydraulic) as the VIN was not included. The failure mileage was approximately 165,900.

NHTSA complaint #11495591
Oct 9, 2022service brakes
So my ABS and traction control lights came on while driving, my steering wheel became stiff, and I had zero brakes. I almost hit another vehicle. After being able to pull over and safely park without hurting myself and child or anyone else, I had my husband come get my car. He said that when opening the break fluid cap it was sucked down. It "fixed" itself after the cap was… Read more

So my ABS and traction control lights came on while driving, my steering wheel became stiff, and I had zero brakes. I almost hit another vehicle. After being able to pull over and safely park without hurting myself and child or anyone else, I had my husband come get my car. He said that when opening the break fluid cap it was sucked down. It "fixed" itself after the cap was fixed. After a few weeks, my 16 yr old was driving and it happened to her, she pulled over, called me. I came to get her and done what my husband said, shutting the car off, turn the break fluid cap off see if the rubber part was sucked down, and it was , to push it back up, check fluid , put cap back on, restart car. This happens every 2-3 weeks. Driving down a very steep canyon in colorado I feared my breaks going out on me. I looked this issue up and there is a recall on 2010 Mercury Milan hybrids just not for particular VIN. This is a serious issue that needs to be addressed.

NHTSA complaint #11488510
Sep 23, 2022service brakes
The brakes failed to stop my car a week ago. A warning brake light appeared at the same time. It happened on a street near my home before I pulled onto the highway. No one was behind me. I shut engine off and when it restarted, I was able to brake, turn around, and return home. I had car towed to repair facility who examined the brakes and determined the brakes needed software… Read more

The brakes failed to stop my car a week ago. A warning brake light appeared at the same time. It happened on a street near my home before I pulled onto the highway. No one was behind me. I shut engine off and when it restarted, I was able to brake, turn around, and return home. I had car towed to repair facility who examined the brakes and determined the brakes needed software update that only ford could do as per a recall that just appeared. I had the car towed to ford dealership where it now sits waiting to be worked into their schedule. This had also happened a year prior backing out of my driveway. Repair facility examined the brakes then, but found no issue as brakes began working again. Other than these 2 incidents, the brakes have been operating correctly. The car is available for inspection at ford dealer in lenoir city. Tn.

NHTSA complaint #11486103
Jun 6, 2022traction control system, service brakes
The contact owns a 2010 Mercury Milan. The contact stated while driving approximately 20 MPH and attempting to stop the vehicle at a gate, the brake pedal was depressed but failed to stop the vehicle. The contact engaged the parking to stop the vehicle. The ABS, brakes, and traction control warning light was illuminated. The vehicle was taken to the dealer to be diagnosed. The… Read more

The contact owns a 2010 Mercury Milan. The contact stated while driving approximately 20 MPH and attempting to stop the vehicle at a gate, the brake pedal was depressed but failed to stop the vehicle. The contact engaged the parking to stop the vehicle. The ABS, brakes, and traction control warning light was illuminated. The vehicle was taken to the dealer to be diagnosed. The contact was informed that the hydraulic control unit and ABS control module failed and needed to be replaced. The vehicle was not repaired due to parts not being available. The manufacturer was made aware of the failure. The approximate failure mileage was 62,200.

NHTSA complaint #11467810
May 26, 2022service brakes, hydraulic
The contact owns a 2010 Mercury Milan. The contact stated that while driving at an undisclosed speed, the brake pedal was depressed but almost went to the floorboard. There were no warning lights illuminated. The vehicle was taken to an independent mechanic who referred the contact to the dealer. The contact called the local dealer but the vehicle was not diagnosed or… Read more

The contact owns a 2010 Mercury Milan. The contact stated that while driving at an undisclosed speed, the brake pedal was depressed but almost went to the floorboard. There were no warning lights illuminated. The vehicle was taken to an independent mechanic who referred the contact to the dealer. The contact called the local dealer but the vehicle was not diagnosed or repaired. The manufacturer was notified but no additional assistance was provided. The contact stated the failure was related to NHTSA campaign number 19v904000 (service brakes, hydraulic). The failure mileage was approximately 99,450.

NHTSA complaint #11466255
May 6, 2022service brakes
Brake failure related to recall 19s54 which my vehicle VIN number was not included. All brake warning lights came on and traction control lights came on as well as brake pedal going to floor and unable to stop in time going over railroad tracks. Almost causing me to crash thru railroad crossing gates as train was approaching. I used emergency brake to stop vehicle. Lights… Read more

Brake failure related to recall 19s54 which my vehicle VIN number was not included. All brake warning lights came on and traction control lights came on as well as brake pedal going to floor and unable to stop in time going over railroad tracks. Almost causing me to crash thru railroad crossing gates as train was approaching. I used emergency brake to stop vehicle. Lights remained on and very little brake peddle stoping now. Ford says vehicle is not one of the VIN numbers included in recall yet it is the same problem. Car needs to be flushed with dot 4 brake fluid brake fluid cap needs replacing and hud needs to be replaced for stuck ABS valve.

NHTSA complaint #11463609
Feb 22, 2022service brakes, hydraulic
The contact owns a 2010 Mercury Milan. The contact stated that ABS engaged while traveling on an icy road, the brake pedal was depressed to the floorboard. There were no warning lights illuminated. The contact continued driving and the failure corrected itself. The vehicle was taken to an independent mechanic who informed the contact that the ABS control module was sticking… Read more

The contact owns a 2010 Mercury Milan. The contact stated that ABS engaged while traveling on an icy road, the brake pedal was depressed to the floorboard. There were no warning lights illuminated. The contact continued driving and the failure corrected itself. The vehicle was taken to an independent mechanic who informed the contact that the ABS control module was sticking and needed to be replaced. The contact stated the failure was related to NHTSA campaign number: 19v904000 (service brakes, hydraulic). The contact called the local dealer however, the vehicle was not diagnosed or repaired. The manufacturer was contacted but no further assistance was provided. The approximate failure mileage was 73,000.

NHTSA complaint #11453386
Jan 27, 2022service brakes, hydraulic, air bags
The contact owns a 2010 Mercury Milan. The contact received notification of NHTSA campaign number: 19v904000 (service brakes, hydraulic) and 21v158000 (air bags) however, the part to do the recall repair was not yet available. The contact took the vehicle to the local dealer and it was confirmed that the part was not yet available. The contact stated that the manufacturer… Read more

The contact owns a 2010 Mercury Milan. The contact received notification of NHTSA campaign number: 19v904000 (service brakes, hydraulic) and 21v158000 (air bags) however, the part to do the recall repair was not yet available. The contact took the vehicle to the local dealer and it was confirmed that the part was not yet available. The contact stated that the manufacturer exceeded a reasonable amount of time for the recall repair. The manufacturer was made aware of the issue. The contact had not experienced a failure. VIN tool confirms part not available.

NHTSA complaint #11449117
Jan 15, 2022exterior lighting, service brakes
Tail and brake light for the second time has failed. A safety function of this nature should not be this difficult to fix and replace. The item should be available and affordable. You literally have to take out a lone to get it fixed. So now I can't go to work or anything else with this vehicle. This is supposed to be an affordable car. So the only way for me right now to… Read more

Tail and brake light for the second time has failed. A safety function of this nature should not be this difficult to fix and replace. The item should be available and affordable. You literally have to take out a lone to get it fixed. So now I can't go to work or anything else with this vehicle. This is supposed to be an affordable car. So the only way for me right now to fix is park it. I hear one person say " well it's not like a wheel falling off " I said tell that to the person behind me. With all these distractions now, between phones and other fancy options on cars. I'm a truck driver so I know how important these warning devices are. It is time to set a new standard in how safety items get replaced availability and cost should never be an issue.!!!!!!!!! With out question.

NHTSA complaint #11447584
Oct 19, 2021service brakes
An ABS warning light appeared on dashboard. When I was slowing to stop, the brake pedal started going to the floorboard. I was able to stop by almost standing on brake pedal. Ford dealership could find nothing. I checked brake fluid, fine. Light on dashboard were out. Was repeating sporadically, took to another mechanic whose assistant almost went through wall of shop. After… Read more

An ABS warning light appeared on dashboard. When I was slowing to stop, the brake pedal started going to the floorboard. I was able to stop by almost standing on brake pedal. Ford dealership could find nothing. I checked brake fluid, fine. Light on dashboard were out. Was repeating sporadically, took to another mechanic whose assistant almost went through wall of shop. After code said ABS module, replaced. Problem repeated. Currently at another ford dealership (4weeks waiting on hydrologic control module). Other Mercury Milan hybrid have been recalled, why not this one?

NHTSA complaint #11437357
Sep 24, 2021service brakes, hydraulic
The contact's sister owns a 2010 Mercury Milan. The contact stated that the brake pedal would depress to the floorboard without warning. The contact also stated that the brake master cylinder and the brake calipers were both replaced by an independent mechanic; however, the failure persisted. The contact then discovered NHTSA campaign number: 19v904000 (service brakes,… Read more

The contact's sister owns a 2010 Mercury Milan. The contact stated that the brake pedal would depress to the floorboard without warning. The contact also stated that the brake master cylinder and the brake calipers were both replaced by an independent mechanic; however, the failure persisted. The contact then discovered NHTSA campaign number: 19v904000 (service brakes, hydraulic) which he linked to the failure. The dealer was notified of the failure and confirmed that the vehicle exhibited the same failure as stated in the recall; however, there were no recalls associated with the VIN. The manufacturer was also notified of the failure and referred him to NHTSA for assistance. The vehicle was not repaired. The failure mileage was 140,000.

NHTSA complaint #11434279
Sep 8, 2021service brakes

While braking for bumps and pot holes the brake pedal goes to the floor resulting in no brakes for a few seconds. Brake pedal returns after pumping the brake pad.

NHTSA complaint #11432201
Aug 23, 2021service brakes, hydraulic
The contact's wife owns a 2010 Mercury Milan. The contact stated that while driving at various speeds, the brake pedal would intermittently soften as the brake pedal would depress to the floorboard without warning. The contact had taken the vehicle to an independent mechanic who informed him of NHTSA campaign number: 19v904000 (service brakes, hydraulic) which he linked to the… Read more

The contact's wife owns a 2010 Mercury Milan. The contact stated that while driving at various speeds, the brake pedal would intermittently soften as the brake pedal would depress to the floorboard without warning. The contact had taken the vehicle to an independent mechanic who informed him of NHTSA campaign number: 19v904000 (service brakes, hydraulic) which he linked to the failure. The manufacturer was then notified of the failure and informed him that they were unaware of the failure and offered no further assistance. The vehicle had yet to be repaired. The failure mileage was approximately 83,000.

NHTSA complaint #11430130
Aug 5, 2021service brakes
At least once a month, when I pull out of my driveway and press the brake pedal it goes all the way to the floor and the car doesn't stop. This happened again on august 3rd, 2021. I have had it to the dealer for this issue and paid to have the ABS valve replaced out of pocket. Ford said the recall "didn't cover my VIN #" and they will not reimburse me. Despite having that… Read more

At least once a month, when I pull out of my driveway and press the brake pedal it goes all the way to the floor and the car doesn't stop. This happened again on august 3rd, 2021. I have had it to the dealer for this issue and paid to have the ABS valve replaced out of pocket. Ford said the recall "didn't cover my VIN #" and they will not reimburse me. Despite having that part replaced, at significant expense, the issue still happens fairly frequently. Driving the car around the block slowly, repeatedly pumping the brakes, is the only way to temporarily resolve the issue.

NHTSA complaint #11427916
Jul 13, 2021service brakes
The contact owns a 2010 Mercury Milan. The contact stated that while driving the brake pedal depressed to the floorboard. The brake warning indicator light was illuminated. The contact called the local dealer but, the vehicle was not diagnosed or repaired. The manufacturer was contacted. The failure mileage was approximately 73,,000. The contact stated the failure was similar… Read more

The contact owns a 2010 Mercury Milan. The contact stated that while driving the brake pedal depressed to the floorboard. The brake warning indicator light was illuminated. The contact called the local dealer but, the vehicle was not diagnosed or repaired. The manufacturer was contacted. The failure mileage was approximately 73,,000. The contact stated the failure was similar to NHTSA campaign number:19v904000 (service brakes, hydraulic).

NHTSA complaint #11424605
Apr 10, 2021steering, unknown or other, service brakes
I was at a store for a while I came outside I crank my car put the car in reverse simultaneously the traction control light the ABS system light came on along with the power steering going out I did see. This is all the symptoms of a recall but it is not associated with my VIN number now the dealership that has my vehicle has service three other recalls where is servicing… Read more

I was at a store for a while I came outside I crank my car put the car in reverse simultaneously the traction control light the ABS system light came on along with the power steering going out I did see. This is all the symptoms of a recall but it is not associated with my VIN number now the dealership that has my vehicle has service three other recalls where is servicing three other recalls that has told me that now I will have to pay $3,500 for a rack and pinion replacement and whatever this recall causes for my brakes

NHTSA complaint #11407384
Apr 1, 2021service brakesCrash
Tl* the contact owns a 2010 Mercury Milan. The contact stated while reversing from her driveway, when depressing the brake pedal to the floor but failed to stop the vehicle. The contact stated she hit the curb and stopped the vehicle movement. The contact stated no warning light was illuminated. The vehicle was not drivable. The vehicle was taken to local dealer sesi lincoln… Read more

Tl* the contact owns a 2010 Mercury Milan. The contact stated while reversing from her driveway, when depressing the brake pedal to the floor but failed to stop the vehicle. The contact stated she hit the curb and stopped the vehicle movement. The contact stated no warning light was illuminated. The vehicle was not drivable. The vehicle was taken to local dealer sesi lincoln (3990 jackson rd, ann arbor, mi 48103: (877) 752-9031) and was informed of future recall associated to her failure. The contact received notification of NHTSA campaign number: 19v904000 (service brakes, hydraulic), however, the part to do the recall repair was unavailable. The vehicle had not been repaired. The manufacturer had been informed of the failure. The failure mileage was unknown .VIN tool confirms parts not available. - (recall related incident) ts

NHTSA complaint #11406000
Mar 14, 2021service brakes

I have a 2010 Mercury Milan. There is an open recall on the hydraulic brake system for over a year without a remedy. I am nervous to drive long distances or sell it because of what might happen. There has been no communication from ford.

NHTSA complaint #11402943
Feb 13, 2021service brakes

Replaced ABS and master cylinder and can't restore brakes after bleeding them out there was still no brakes replaced ABS and master cylinder rebleed them and still no brakes

NHTSA complaint #11396022
Feb 8, 2021service brakes

Can not restore brakes tried replacing mastercyclinder and ABS also bleed ABS and master cylinder still no brakes

NHTSA complaint #11395205
Feb 8, 2021service brakes
At night, as my son was approaching a 4 way stop on a city street in slick, icy conditions, ABS kicked in and locked up and slid through the stop sign. Since that time, the ABS has not worked. The brakes sill work, but you have depress it nearly all the way. Took it to the mechanic last week, and said hcu valve was sticking and not closing. Noted their was a recall on… Read more

At night, as my son was approaching a 4 way stop on a city street in slick, icy conditions, ABS kicked in and locked up and slid through the stop sign. Since that time, the ABS has not worked. The brakes sill work, but you have depress it nearly all the way. Took it to the mechanic last week, and said hcu valve was sticking and not closing. Noted their was a recall on this for early manufactured model NHTSA #19v904.

NHTSA complaint #11395175
Jan 28, 2021service brakes

I don't have brakes and the ABS and brake light is on.

NHTSA complaint #11390474
Nov 16, 2020service brakes
My Mercury Milan has 124,000 miles on it and I just experienced the soft brake problem while parking my car in the garage at a slow speed and the pedal went to the floor. Now when I drive the vehicle, the pedal goes almost all the way to the floor to stop now and has not returned to normal. I called ford direct after contacting my local dealership, and they told me that my car… Read more

My Mercury Milan has 124,000 miles on it and I just experienced the soft brake problem while parking my car in the garage at a slow speed and the pedal went to the floor. Now when I drive the vehicle, the pedal goes almost all the way to the floor to stop now and has not returned to normal. I called ford direct after contacting my local dealership, and they told me that my car does not fall with in the date range from manufacturing (6 mos) for the ford issued recall number 19s54. They basically told me this is an owners expense now. Clearly the bosch hcu parts ford installs are defective and and they should cover the cost. I just received an estimate of almost a $1000 to replace the hcu and flush the break system. I am at a lost for words in how I feel about this.

NHTSA complaint #11374948
Nov 9, 2020structure, service brakesCrash
When braking to slow down or get to a stop the brake pedal pressed down but the car didn't seem to stop as quick as it should have. A while later, when having to brake quickly, the car hit another vehicle infront of it. The accident took place on a city road. No police report was filed because the other car's bumper had minor damage unlike my car which the front & hood of has… Read more

When braking to slow down or get to a stop the brake pedal pressed down but the car didn't seem to stop as quick as it should have. A while later, when having to brake quickly, the car hit another vehicle infront of it. The accident took place on a city road. No police report was filed because the other car's bumper had minor damage unlike my car which the front & hood of has substantial damage.the repair estimate for me was about 4k dollars which is higher than I can afford.

NHTSA complaint #11373887
Oct 23, 2020service brakes

The car brakes no longer work, replaced brake pads and calipers and still no brakes. Took it to dealer and they said there is a recall in place and still no fix. It's been almost a year now.

NHTSA complaint #11365907
Oct 13, 2020electronic stability control (esc), service brakes
The brake light, ABS light, and electric stabilizer lights came on, which resulted in the loss of full braking. I took the car to my mechanic; he discovered that the ABS pump was leaking. I purchased a used ABS pump, and after installing it, the mechanic had no success resetting the codes. He told me it could be that the part is a used one, so I ordered a new ABS pump from… Read more

The brake light, ABS light, and electric stabilizer lights came on, which resulted in the loss of full braking. I took the car to my mechanic; he discovered that the ABS pump was leaking. I purchased a used ABS pump, and after installing it, the mechanic had no success resetting the codes. He told me it could be that the part is a used one, so I ordered a new ABS pump from parts maven ford. After installing the new part, the mechanic had the same issues with it as well. The mechanic is not able to clear or reset all codes for the electric stabilizer, ABS, and brake lights and adequately calibrate the brakes. It left the brake very soft on the pedal, and it required pressing the brake hard to the floor to bring the car to a full stop. What's worst, when moving from the park, the car would roll forward or backward and is not stopping the vehicle as it ought to do. It takes longer to stop, and it requires pressing hard on the brake and longer distance to come to a full stop. Upon further research, the mechanic found out that ford knew about the problem and had issued a recall for owners who were experiencing the same problem mentioned above to have their vehicles fix for free at a ford repair shop. I contacted ford on 10/12/20 only to be told by the ford repair shop and on an online chat with a ford rep that my car, while it's one of the vehicles listed in the recall, is not applicable due to my VIN#. It is very troublesome because ford only limited the recall to some

NHTSA complaint #11364107
May 21, 2020service brakes, hydraulic
Tl* the contact owns a 2010 Mercury Milan. The contact received notification of NHTSA campaign number: 19v904000 (service brakes, hydraulic) however, the part to do the repair was unavailable. The contact stated that the manufacturer exceeded a reasonable amount of time for the recall repair. Neither the manufacturer nor the dealer were made aware of the issue. The contact had… Read more

Tl* the contact owns a 2010 Mercury Milan. The contact received notification of NHTSA campaign number: 19v904000 (service brakes, hydraulic) however, the part to do the repair was unavailable. The contact stated that the manufacturer exceeded a reasonable amount of time for the recall repair. Neither the manufacturer nor the dealer were made aware of the issue. The contact had not experienced a failure. VIN tool confirms parts not available.

NHTSA complaint #11325393
May 20, 2020service brakes, hydraulic
Tl* the contact owns a 2010 Mercury Milan. The contact stated while driving at approximately 30 MPH, the brake pedal was depressed and went to the floorboard extending the braking distance. The parking brake was used to slow and stop the vehicle. There was no warning light illuminated. The contact drove the vehicle to the residence. The vehicle was taken to john kennedy ford… Read more

Tl* the contact owns a 2010 Mercury Milan. The contact stated while driving at approximately 30 MPH, the brake pedal was depressed and went to the floorboard extending the braking distance. The parking brake was used to slow and stop the vehicle. There was no warning light illuminated. The contact drove the vehicle to the residence. The vehicle was taken to john kennedy ford of jenkintown (1650 the fairway, jenkintown, pa 19046) to be diagnosed. The contact was informed that the vehicle experienced complete brake failure. The vehicle was not repaired. The VIN was included in NHTSA campaign number: 19v904000 (service brakes, hydraulic) however, the part was not available. The manufacturer was made aware of the failure. The failure mileage was 153,000. VIN tool confirms parts not available.

NHTSA complaint #11325265
May 16, 2020service brakes
When the brake pedal is released the car doesn't move forward or backward. The brakes are sticking between stopped and go. This problem also occurs when the car is in motion and there is shaking and a vibration that literally comes out of nowhere. The main question here to be answered; is the ABS valve and the hydraulic control unit working properly? Currently the car is not… Read more

When the brake pedal is released the car doesn't move forward or backward. The brakes are sticking between stopped and go. This problem also occurs when the car is in motion and there is shaking and a vibration that literally comes out of nowhere. The main question here to be answered; is the ABS valve and the hydraulic control unit working properly? Currently the car is not covered under the ford recall 19s54. The recall for the ABS hydraulic control unit needs to be expanded to cover all Mercury Milan vehicles. The testing and or replacement of the hcu is critical for all Milan owners safety. I was told at my dealership that there is no recall and the ABS light isn't on so there isn't any problem. I am going to see if I can get this problem repaired on my own after dealing with this issue for the past six months. *tr

NHTSA complaint #11324834
← All 2010 Mercury Milan problems & recalls