Sep 15, 2025steering, vehicle speed control, service brakes
-the steering wheel and brake locked up and became unusable while driving at approximately 75mph. Cruise control was enabled for a few miles (maybe 2) and disabled after. Around 5 minutes after disabling, the car began to surge between acceleration and deceleration drastically on its own. All of the dashboard lights that come on when the key is initially inserted came on at… Read more
-the steering wheel and brake locked up and became unusable while driving at approximately 75mph. Cruise control was enabled for a few miles (maybe 2) and disabled after. Around 5 minutes after disabling, the car began to surge between acceleration and deceleration drastically on its own. All of the dashboard lights that come on when the key is initially inserted came on at once while engine was on/running and the car was in drive. After finally being able to reach a safe enough spot, I put the car in park and turned the engine off. I sat for a few minutes to try and turn the engine/car back on and the car would not crank, but the overhead lights, radio, and dash lights were functioning. -this was an extremely dangerous experience. The car began to decelerate rapidly in heavy freeway traffic. At that speed, with many semi-trucks traveling nearby, this sudden loss of speed created an extremely dangerous situation. My vehicle instantly became a slow moving obstacle in the lane. Only by luck and quick reaction was a serious or fatal collision avoided. The car would not start back up so I was sitting at the edge of the highway as many cars flew by just inches away from my car. -I am away at college in a rural city. Accessibility is limited as well as support because of lack of resources. -the car was towed to a mechanic who does not specialize in german cars and stated they did not have the proper tools to "get into the car" because the motor is "locked up" and the car wouldn'
NHTSA complaint #11687260
Jul 1, 2025service brakes, hydraulic
The contact owns a 2012 Mercedes-Benz c250. The contact stated while driving 35-40 MPH and depressing the brake pedal, the brake pedal was significantly stiff, and the vehicle failed to respond as needed. The contact stated that upon standing on the brake pedal, the vehicle responded as needed. The contact stated that the failure recurred while driving 65 MPH. The vehicle was… Read more
The contact owns a 2012 Mercedes-Benz c250. The contact stated while driving 35-40 MPH and depressing the brake pedal, the brake pedal was significantly stiff, and the vehicle failed to respond as needed. The contact stated that upon standing on the brake pedal, the vehicle responded as needed. The contact stated that the failure recurred while driving 65 MPH. The vehicle was taken to the dealer, where the vacuum pump was replaced; however, the failure recurred. The vehicle was taken to Mercedes-Benz of beaumont (1865 I-10 s, beaumont, tx 77701), where it was test-driven, and the dealer became aware that the brake pedal was extremely firm. The dealer diagnosed the vehicle and determined that the vacuum pump needed to be replaced. The part was replaced; however, the failure persisted. The contact stated that the failure increased, causing the contact to engage the parking brake to stop the vehicle. The vehicle was not repaired. The manufacturer was notified of the failure, but no assistance was provided. The failure mileage was approximately 96,826.
NHTSA complaint #11670521
Jan 27, 2025steering, power train, service brakes
Lost of drive power and the vehicle steering wheel locked on my mercedes from a damaged malfunctioning steering lock actuator module due to mechanical issues within the steering column such as bad steering wheel assembly, faulty steering lock module or issue with the wiring or other electrical components and the mercedes dealer is the only one who solves this issue no other… Read more
Lost of drive power and the vehicle steering wheel locked on my mercedes from a damaged malfunctioning steering lock actuator module due to mechanical issues within the steering column such as bad steering wheel assembly, faulty steering lock module or issue with the wiring or other electrical components and the mercedes dealer is the only one who solves this issue no other mechanic in general. My safety was at risk due to I lost power and lost of front brakes due to bad sway bar assembly or components could of caused and accident when this happened on november 12, 2024 the problem dealership found during vehicle inspection was code 25464 they told me recommend to replace electric lock module and repair estimate was $2,829.78 and before I approved the the amount I told mr ivan velasco service advisor that after they replace the module that if my vehicle was going to be working again and that if I was just going to make 1 payment of $2,829.78 then I would approved it so I did. Weeks later I got an email asking for more money they wanted another payment for $600 saying it needed a sensor that has something to do with the transmission because after replacing the new module the vehicle did not start up there was no type of communications nothing at all and I responded that I was not going to pay $600 more just cause they don't know what their doing because they promise me the car was going to work after they replace the module now that it did not want to crank up they found ano
NHTSA complaint #11638949
Sep 1, 2024suspension, service brakes
The subframe has developed extensive rust and corrosion, which I believe is a result of faulty manufacturing. This corrosion has severely compromised the structural integrity of the subframe, posing a serious safety risk. The corrosion appears to be inherent to the materials or design used in the manufacturing process, leading to the rapid deterioration of the subframe. There… Read more
The subframe has developed extensive rust and corrosion, which I believe is a result of faulty manufacturing. This corrosion has severely compromised the structural integrity of the subframe, posing a serious safety risk. The corrosion appears to be inherent to the materials or design used in the manufacturing process, leading to the rapid deterioration of the subframe. There are also no warning lights or failure indicators for this issue. As a result, the subframe is at risk of collapsing, which could cause catastrophic failure of the vehicle's suspension and steering systems. This situation creates an immediate danger to both the occupants of the vehicle and others on the road.
NHTSA complaint #11612045
Jul 25, 2024service brakes
Brake line corrosion
NHTSA complaint #11604605
Jun 4, 2024suspension, structure, service brakes
Took my car for a doorknob repair and was told the whole subframe is rotted. They told me not to drive the car on the highway. The car brakes very hard to the right and always goes right while making cranking noises. Car feels very unsafe. I paid a lot of money for this and own a 2012 c300 4matic.
NHTSA complaint #11592433
May 18, 2024structure, service brakes
This is a low mileage car with odometer reading of 25668 (less than 2000 miles per year), used sparingly and always parked in the garage. On 05/07/2024 I noticed brake fluid flowing from the left rear side of the car; on examination this seemed to come from the flexible hose that connects the brake fluid line to the brake caliper. I called my Mercedes-Benz (mb) dealer and… Read more
This is a low mileage car with odometer reading of 25668 (less than 2000 miles per year), used sparingly and always parked in the garage. On 05/07/2024 I noticed brake fluid flowing from the left rear side of the car; on examination this seemed to come from the flexible hose that connects the brake fluid line to the brake caliper. I called my Mercedes-Benz (mb) dealer and arranged for further inspection and service. The technician identified that the brake fluid lines to the rear were both totally corroded and in need of immediate replacement. Since the lines were embedded behind the subframe it necissated lowering the subframe to access. Other parts were also severely corroded and required replacement. (see attached pdf of invoice) the total cost of the repair was $4,592.93. The dealership applied a discount of $150.00 to this for an amount due of $4,442.93. As an engineer, I believe the material used for the brake fluid lines were unsuitable and furthermore were unprotected for the harsh environment experienced under the car, and I believe mb with all their experience in automobiles manufacturing over the years clearly should have known and forseen this fact; I do believe that mb is responsible for this premature failure of the brake lines of my car aven driven only 25,666 miles to date. I am therefore requesting NHTSA to require mb to reimburse me for the unnecessary expense of the costly repairs. It is only fortunate that this failure was identified in my garage and
NHTSA complaint #11589443
Feb 22, 2024suspension, service brakes
While I was driving my 2012 mb c300 4matic sport sedan in nov', 2023 with history of regular maintenance, noticed a pretty load knocking noise, shudder and drifting to left a bit when it brakes from the driver's rear side especially on the highways. I took it to our local mechanic who was horrified to report that the sub frame was broken and completely rotten out too… Read more
While I was driving my 2012 mb c300 4matic sport sedan in nov', 2023 with history of regular maintenance, noticed a pretty load knocking noise, shudder and drifting to left a bit when it brakes from the driver's rear side especially on the highways. I took it to our local mechanic who was horrified to report that the sub frame was broken and completely rotten out too specifically rust issue with the rear suspension-rear subframe. He gets other german cars like bmw & audi even older and more miles in chicago but none have rusted so much as these mb C-Class cars. Knowing the dealers wont accept it a manufacturing defect, he was planning to repair it (no chance of wielding that thin metal sheet as the likelihood of breaking it is high). I was surprised to see 2010 chevy impala having a much more robust under the cover protection and no rusting with 115k miles. Information redacted pursuant to the freedom of information act (foia), 5 u.s.c. 552(b)(6)
NHTSA complaint #11573402
Jul 19, 2023service brakes, hydraulic, structure
The contact owns a 2012 Mercedes-Benz c300. The contact stated that the vehicle was making a loud bang sound towards the rear of the vehicle while driving over bumps in the roadway. The contact took the vehicle to the dealer and was informed that the rear subframe and the rear brake line were severely rusted. The subframe was replaced under an extended warranty coverage;… Read more
The contact owns a 2012 Mercedes-Benz c300. The contact stated that the vehicle was making a loud bang sound towards the rear of the vehicle while driving over bumps in the roadway. The contact took the vehicle to the dealer and was informed that the rear subframe and the rear brake line were severely rusted. The subframe was replaced under an extended warranty coverage; however, the brake line was not covered under the extended warranty. The brake line was not replaced. The manufacturer was made aware of the failure. The approximate failure mileage was 110,000.
NHTSA complaint #11533167
Jun 22, 2023service brakes
On 6/20/23 I was driving this vehicle on the 5 freeway north bound exit 102 in washington. I found myself travelling at 60mph just moving over to the middle lane of traffic. I needed to slow the vehicle a little and pushing down on brakes I found there was no reaction from the braking system. Making a quick decision I moved over to the emergency lane where I came to a stop.… Read more
On 6/20/23 I was driving this vehicle on the 5 freeway north bound exit 102 in washington. I found myself travelling at 60mph just moving over to the middle lane of traffic. I needed to slow the vehicle a little and pushing down on brakes I found there was no reaction from the braking system. Making a quick decision I moved over to the emergency lane where I came to a stop. There were no warning signs of the issue. I had the vehicle towed to my mercedes benz dealership where I had the car service the day before on 6/19/23 where nothing was noted on this problem. After inspection from the technician at the dealership it was found that the brake vacuum pump was no longer working. Which technician said had caused the issue and he had never experienced this issue before. I am bringing this to your attention due to it could have caused a fatal accident to with me and other people on the freeway.
NHTSA complaint #11528248
May 16, 2023suspension, service brakes
I found out about the mercedes subframe failure issue after having problems on the road, that could have killed me, and being warned not to drive anymore by an authorized repair shop because my vehicle was not safe for me to drive. This has caused many other issues with my cars mechanics due to this defect from the mercedes factory.
NHTSA complaint #11522182
May 8, 2023service brakes, hydraulic, structure
The contact owns a 2012 Mercedes-Benz c300. The contact stated that while his wife was driving at an undisclosed speed, she heard an abnormal sound coming from the rear of the vehicle. The vehicle was taken to an independent mechanic where it was diagnosed that the subframe wheel assembly needed to be replaced. No warning lights were illuminated. The vehicle was repaired;… Read more
The contact owns a 2012 Mercedes-Benz c300. The contact stated that while his wife was driving at an undisclosed speed, she heard an abnormal sound coming from the rear of the vehicle. The vehicle was taken to an independent mechanic where it was diagnosed that the subframe wheel assembly needed to be replaced. No warning lights were illuminated. The vehicle was repaired; however, the contact stated that he received an unknown manufacturer’s recall for the subframe assembly which it was then taken to the dealer, and the contact was informed by the technician that the rear brake line was leaking and needed to be replaced. The vehicle was not repaired. The manufacturer was notified of the failure and the contact was informed that the VIN was not included in a recall. The failure mileage was approximately 120,000.
NHTSA complaint #11521006
Apr 20, 2023fuel system, gasoline, service brakes
The contact owns a 2012 Mercedes-Benz c300. The contact stated while driving at various speeds, extra brake travel time was needed to stop the vehicle. There was no warning light illuminated. The contact had taken the vehicle to an independent mechanic where the vehicle was purchased, and he was informed that the failure was caused by the new brake pads placed on the vehicle.… Read more
The contact owns a 2012 Mercedes-Benz c300. The contact stated while driving at various speeds, extra brake travel time was needed to stop the vehicle. There was no warning light illuminated. The contact had taken the vehicle to an independent mechanic where the vehicle was purchased, and he was informed that the failure was caused by the new brake pads placed on the vehicle. The contact eventually took the vehicle to a dealer and was informed that the fuel tank and brake lines were corroded; and the contact was provided an estimate for the repair. The vehicle was not repaired. The manufacturer was not notified of the failure. The failure mileage was approximately 96,000.
NHTSA complaint #11518035
Mar 26, 2023suspension, power train, service brakes
The left rear weld of the subframe on my 2012 c300 4matic has rotted through and appears to be a manufacture's part defect. I found out about this issue from a brake inspection and told it is a safety concern, which mercedes benzes is aware of but has no recalls for the defect.
NHTSA complaint #11513818
Aug 5, 2022service brakes, hydraulic, structure
The contact owns a 2012 Mercedes-Benz c300. The contact stated that the vehicle was taken to the dealer for an airbag inspection. During the inspection, the dealer informed the contact that the rear subframe was corroded. The vehicle was diagnosed and the contact was informed that the brake lines and rear subframe needed to be replaced. The vehicle was not repaired. The… Read more
The contact owns a 2012 Mercedes-Benz c300. The contact stated that the vehicle was taken to the dealer for an airbag inspection. During the inspection, the dealer informed the contact that the rear subframe was corroded. The vehicle was diagnosed and the contact was informed that the brake lines and rear subframe needed to be replaced. The vehicle was not repaired. The manufacturer was not notified of the failure. The approximate failure mileage was 120,000.
NHTSA complaint #11477748
Mar 24, 2022suspension, service brakes
From the mechanics notes: four-wheel alignment could not be completed. Attempts to align the rear axle were unsuccessful due to flexing/movement in the rear suspension. A brief road test revealed occasional suspension “clunking” coming from the rear of the vehicle. Close examination of every suspension component mount revealed heavy cracking on the passenger side lower drag… Read more
From the mechanics notes: four-wheel alignment could not be completed. Attempts to align the rear axle were unsuccessful due to flexing/movement in the rear suspension. A brief road test revealed occasional suspension “clunking” coming from the rear of the vehicle. Close examination of every suspension component mount revealed heavy cracking on the passenger side lower drag link subframe mount (see emailed image). The driver’s side low drag link mount location is also starting to show signs of overstress and rust/flaking. This is a known design defect that has been the subject of a manufacturer’s recall in canada. Given the substantial safety impact of this design defect/failure, it is expected that a us recall will be forthcoming. Proper repair of this failure involves removing the entire rear axle/subframe assembly and either rebuilding/re enforcing the subframe or replacing it with a new unit and transferring all the suspension components to the new subframe. A current check of subframe availability is showing nla (no longer available) status from mercedes wholesale dealers – likely due to recent high demand and inability to satisfy that demand. This supply issue may also be playing a role in mercedes’ failure to address this high level safety issue with a us based recall campaign. The manufacturer may be ramping up production of this component to address anticipated need – waiting to announce a recall when it has sufficient parts on hand to execute the campaign. It is s
NHTSA complaint #11458128
Oct 6, 2021suspension, service brakes, fuel/propulsion system
The rear drivers side had a loud chunking/clanking noise while driving and the vehicle was unable to control and break when in motion. Driving was impossible as the breaking component was a total failure and car could not be controlled while traveling down 45-50mph zone. I reduced my speed to 20-25 MPH by letting off on the gas to get better control of the car if breaking… Read more
The rear drivers side had a loud chunking/clanking noise while driving and the vehicle was unable to control and break when in motion. Driving was impossible as the breaking component was a total failure and car could not be controlled while traveling down 45-50mph zone. I reduced my speed to 20-25 MPH by letting off on the gas to get better control of the car if breaking would need to be suddenly made. I relied on the shoulder to pull off if any sudden breaking was needed. The car was immediately take to be reviewed by a specialized mercedes benz mechanic and further inspection proved that the rear subframe on the driver’s (left) side was corroded and broken. The connecting arms are rusted, corroded and rendered the car inoperative. I notified my insurance company as well as car manufacturers corporate office. I researched this issue further and discovered that this reoccurring issue with this make and model. There are a pheletera of recounting of this same issue on various message boards to validate the same issues and callouts I found. The car was taken to the dealership that it was purchased and further inspection showed that the left side subframe/ subframe arms were corroded with rust and broken. The brake lines and fuel tank were equally rusted and corroded. The service manager confirmed that this is defect of the car but it had been part of a recall. I had the car towed for 2nd opinion to another dealership service department to access the car and this callout further
NHTSA complaint #11435789
Jul 19, 2021service brakes
Brakes failed to deploy, randomly, during recent trip; very dangerous; pressed brakes, would not engage and car kept moving and would not stop; pushed car into p (park) to stop moving; just completed a 225 mi trip from chicago to detroit metro area traveling at speeds between 65-70 MPH with no issue, all service on vehicle is and has been conducted via mercedes authorized… Read more
Brakes failed to deploy, randomly, during recent trip; very dangerous; pressed brakes, would not engage and car kept moving and would not stop; pushed car into p (park) to stop moving; just completed a 225 mi trip from chicago to detroit metro area traveling at speeds between 65-70 MPH with no issue, all service on vehicle is and has been conducted via mercedes authorized dealers, had vehicle in for service on morning of trip for overview and safety check prior to leaving and no known issues; after coming off freeway engaged brakes upon pulling into neighborhood and vehicle brakes failed completely-stopped engaging; no notification; no indicator lights or read out of issues related to brakes was indicated on dashboard; had we been on the freeway at the time of incident coming off an exit ramp at high speed we would have suffered a grave result, brakes failed completely. This is a danger and unacceptable for this manufacturer; vehicle has been towed to dealership, is not drivable, and is currently being assessed. This has been widely reported on other sites, regarding this specific vehicle, mercedes c250, my model year is 2012; I researched this issue, yesterday, to determine what could possibly have gone wrong as vehicle was not leaking fluids and no indication of issues during recent diagnostics and safety check two days prior. Not having sufficient braking capability with no warning or indication is dangerous, a liability to manufacturer and should be investigated immediate
NHTSA complaint #11425478
Dec 21, 2020service brakes
At about 40,000 miles the parking brake began sticking and was difficult to release. This was replaced under warranty. It began happening again . I spoke to the mercedes USA and they said I would have o pay to replace it. I believe this part is defective.
NHTSA complaint #11384474
Feb 1, 2018electrical system, wheels, service brakesFire
My vehicle was damaged by k and h auto. The electrical unit is malfunctioning, the light is broken on the right side, and the rotors and brakes have been rusted, please have someone attend to this matter. Thanks, and have a very blessed day. Another company by the name of ans towing, towed my vehicle without care and I am now having acceleration issues with my vehicle. The… Read more
My vehicle was damaged by k and h auto. The electrical unit is malfunctioning, the light is broken on the right side, and the rotors and brakes have been rusted, please have someone attend to this matter. Thanks, and have a very blessed day. Another company by the name of ans towing, towed my vehicle without care and I am now having acceleration issues with my vehicle. The vehicle was dragged through water on october 17-18, 2018.
NHTSA complaint #11066436
Dec 4, 2012service brakesCrash
I made a sharp turn into a parking area then another sharp turn into the parking space and when I straighten the wheel out to complete parking an applied my foot on brake the pedal went to the floor and car would not stop the only thing that stopped me was the concrete curbing which I hit hard and damaged the under carriage of my car. The tires hitting the concrete is made… Read more
I made a sharp turn into a parking area then another sharp turn into the parking space and when I straighten the wheel out to complete parking an applied my foot on brake the pedal went to the floor and car would not stop the only thing that stopped me was the concrete curbing which I hit hard and damaged the under carriage of my car. The tires hitting the concrete is made forced car to stop. I contacted dealership to report the problem and see if they could tow vehicle and provide me with a car since I was stranded. They were closing and couldn't help me. Had the vehicle checked to see if a brake line had broke or if brake fluid level was ok, everything checked out ok drove car home very slow noticed car having a message on dash hold when I apply brakes and a message ( p shift in park) came on dash as I was driving. This had never happened before this incident occurred. Called dealer the following morning and had car towed to them. 5 days later they tell me that they cannot find anything wrong with my brakes and my car is safe. I am not driving the car I will be having it towed. There is something wrong with the brakes and I do not feel I should have to put myself or anyone else on the road at risk for losing there life. Just because they cant find anything it doesn't mean there isn't anything wrong. I have researched on the internet about the car I own and I have seen many people with the same problem as mine. I have not had the car but for 2 months. This is a safety issue
NHTSA complaint #10487272