CarProblemsDB

2005 Mazda RX-8 transmission problems

54 owners reported transmission & powertrain problems — 33% of all 162 complaints about the 2005 Mazda RX-8.

Transmission & powertrain complaints by Mazda RX-8 year

20101
20093
20081
20079
200613
200554
2004154

What owners report

Jun 18, 2021steering, power train

The steering wheel sometimes its hard to control sometimes its normal and when going fast the steering is so loose like there's a gaps that you need your two hands on the steering all time and the weels weigel at high speed 60mph. Its hard drive the car on the freeway and everyday use I already spend $2800 at the dealership get fix but never get fix the car no accident to be like that. Car has 80k mileage

NHTSA complaint #11421371
Oct 11, 2019power train, service brakes

The clutch pedal assembly bracket breaks at the spotwelds which also breaks the clutch master cylinder and lukily this broke while starting the car

NHTSA complaint #11267976
Jul 7, 2018power train, vehicle speed control, unknown or other
Clutch pedal bracket broken under normal conditions. I went to push the clutch in to downshift at highway speeds to over take a slower vehicle and it snapped with an audible "pop" and I couldnt shift into the lower gear and my rpms, went to idle at highway speed. Had it broken at a different time, I could have been locked into a certain gear and ha to break fast or crash… Read more

Clutch pedal bracket broken under normal conditions. I went to push the clutch in to downshift at highway speeds to over take a slower vehicle and it snapped with an audible "pop" and I couldnt shift into the lower gear and my rpms, went to idle at highway speed. Had it broken at a different time, I could have been locked into a certain gear and ha to break fast or crash risking the lives of my occupants and the occupants of another vehicle

NHTSA complaint #11109969
Jul 21, 2016power train1 injured

Driving my Mazda rx8 last night on a local highway shifting from fifth to sixth gear the clutch pedal gave way and doing 65mph and stuck itself under the brake pedal had to shut the car off and hit the e brake to stop. Lucky im not dead.

NHTSA complaint #10886296
Aug 22, 2014engine and engine cooling, power train

Oil cooler coupling severely rotted to the point of failure (hoses looked fine just the coupling areas). Warranty will not cover parts and Mazda has recalled in canada (special service #76), which is 30 miles from my home but will not do anything to help me in the states. Repair cost is over $1300 for new lines. *tr

NHTSA complaint #10627632
Jul 2, 2014suspension, power train

Clutch bracket snapped while at stop sign. Unable to get car into gear. *tr

NHTSA complaint #10607825
May 4, 2014suspension, fuel system, gasoline, power train, vehicle speed control

As I'm driving my clutch pedal gets stuck when it hits the floor and wouldn't up back up on its own and I would have to use my foot to tap it under to go back up. Clutch pedal seems to be leaking oil also. Also at times when I'm wanting to change gears the shift knob would grind gears. If I'm going at a fast speed it often keeps me from shifting to fifth gear and I would have to jump to sixth instead. *tr

NHTSA complaint #10586448
Jan 14, 2014power train
I was on my way to buy some food supplies for weekend. I was looking for a parking lot at low speed, so when I stepped onto the clutch pedal to put back to neutral and parked suddenly I heard a crack. At that time I did not know what it was until 30 minutes of shopping later, I started the engine and felt a little odd about the pedal clutch. The clutch pedal was function a… Read more

I was on my way to buy some food supplies for weekend. I was looking for a parking lot at low speed, so when I stepped onto the clutch pedal to put back to neutral and parked suddenly I heard a crack. At that time I did not know what it was until 30 minutes of shopping later, I started the engine and felt a little odd about the pedal clutch. The clutch pedal was function a little odd when I stepped into the pedal, I felt like it didn't release completely. Fortunately, I made a the way home and checked. When I got home and it snapped off. *tr

NHTSA complaint #10559965
Jan 12, 2014power train

As I was shifting into 4th gear, my clutch pedal mad an odd loud "cracking" sounds and ever since then, my pedal is very loose and has a lot of play and engages very low to the floor. It also has very little pressure now. *tr

NHTSA complaint #10559485
Sep 10, 2013power train
As I was pressing my clutch pedal to place my car into first gear, I heard and felt a snap in the clutch. I then noticed that my clutch would not fully disengage and I had trouble placing my car into gears and out of them. Once I arrived home I examined my clutch and noticed that the bracket had snapped. I contacted the Mazda dealership and I was told my car was no longer… Read more

As I was pressing my clutch pedal to place my car into first gear, I heard and felt a snap in the clutch. I then noticed that my clutch would not fully disengage and I had trouble placing my car into gears and out of them. Once I arrived home I examined my clutch and noticed that the bracket had snapped. I contacted the Mazda dealership and I was told my car was no longer covered by the warranty and I would have to replace the part out of pocket for a flaw that Mazda created. *tr

NHTSA complaint #10542902
May 6, 2013power train

The clutch would not allow a shift into gear, clutch pedal bracket assembly broke. *tr

NHTSA complaint #10510756
Apr 16, 2013power train, engine

The clutch pedal bracket in my 2005 Mazda RX-8 has broken and as a result is very difficult to change gears. *tr

NHTSA complaint #10508397
Apr 3, 2013power train

The clutch pedal bracket on my '05 rx8 broke. It had been squeaking for some time but I did not recognize it was under an extended warranty. The left side spot weld failed and the mounting ear sheared off of the bracket. Mazda na refused to apply the 100k mile warranty to my 106.8k mile car. *tr

NHTSA complaint #10505472
Jul 1, 2012power train, electrical system, vehicle speed control
**resubmit-didn't go through** I was driving approx 65 MPH on the freeway and felt a kick/jolt and had a loss of power. My speed went down10-15 MPH and although I tried to accelerate it wouldn't do anything. I pulled over to the shoulder and tried to exit but car refused to go into gear. Every time I forced it into gear, the car would constantly stall and die. I had the… Read more

**resubmit-didn't go through** I was driving approx 65 MPH on the freeway and felt a kick/jolt and had a loss of power. My speed went down10-15 MPH and although I tried to accelerate it wouldn't do anything. I pulled over to the shoulder and tried to exit but car refused to go into gear. Every time I forced it into gear, the car would constantly stall and die. I had the ignition coil and spark plug replaced but now the clutch just sinks to the floor. I've tried to pump the clutch to get it into gear but this is quite dangerous on the road. My vehicle has trouble controlling its speed since there's a lag switching from 3rd to 4th, 5th to 6th since I have to pump my sunken clutch several times and fiddle with the shifter to actually kick my car into the next gear. My car is now over 100k miles and just read about the Mazda rx8 clutch pedal recall online. This malfunction/safety issue was never announced professionally by my dealer. Mazda had no problems contacting me via phone, email ,mail regarding bills but for some reason failed to give me a notice regarding this defect. I've been advised that repairing this problem is quite expensive and since my car although less than 8 years old has passed the extended warranty based on mileage, I'll be stuck driving this car without proper repairs? I feel Mazda should've contacted all rx8 owners to reduce the number any future disasters. Would there be any chance to extend the warranty for the clutch pedal based on mileage over 120k? I

NHTSA complaint #10463900
Jan 31, 2012power train, electrical system
Failure of clutch pedal assembly. A plastic plate cracked and caused an irritating plastic binding noise, ever time I released the clutch pedal. This apparently happens a lot, sometimes it is fixable but in my case I had to replace my entire assembly, as I was told if it completely cracked I would lose the function of my clutch pedal. Failure of the passenger side power… Read more

Failure of clutch pedal assembly. A plastic plate cracked and caused an irritating plastic binding noise, ever time I released the clutch pedal. This apparently happens a lot, sometimes it is fixable but in my case I had to replace my entire assembly, as I was told if it completely cracked I would lose the function of my clutch pedal. Failure of the passenger side power lock actuator. I have read many accounts of this part failing. Usually blamed on hot or cold claimant, however mine just failed earlier this week, with weather in the mid 40's. Just from the amount of postings I found when this happened to me it needs to be reported. *tt

NHTSA complaint #10446055
Jan 6, 2012power train, vehicle speed control
While driving at 50 MPH and changing gears normally the clutch pedal assembly suffered a catastrophic breakage causing the cars transmission to become inoperable. Transmission had to be damaged to be forced into neutral to come to a stop. Clutch pedal had already previously been replaced in 2009 after identical incident occurred. Mazda north america has refused to honor a… Read more

While driving at 50 MPH and changing gears normally the clutch pedal assembly suffered a catastrophic breakage causing the cars transmission to become inoperable. Transmission had to be damaged to be forced into neutral to come to a stop. Clutch pedal had already previously been replaced in 2009 after identical incident occurred. Mazda north america has refused to honor a warranty replacement for the most recent incident. *tr

NHTSA complaint #10442729
Aug 28, 2011power train
My second incident on the same vehicle/part. I previously had the clutch pedal in my Mazda RX-8 replaced because of a broken bracket. The replacement was an identical part with no redesigns. Approximately 16 months later it broke yet again. Same conditions, driving on the road, sudden loss of resistance and crunching sound from pedal, unable to shift properly. Inspecting… Read more

My second incident on the same vehicle/part. I previously had the clutch pedal in my Mazda RX-8 replaced because of a broken bracket. The replacement was an identical part with no redesigns. Approximately 16 months later it broke yet again. Same conditions, driving on the road, sudden loss of resistance and crunching sound from pedal, unable to shift properly. Inspecting the vehicle after parking revealed that the exact same spot weld broke, leaving the bracket to move away from the firewall and not providing leverage for the clutch piston into the master cylinder. *tt

NHTSA complaint #10422343
Jun 10, 2011power train

On my Mazda 2005 rx8 the clutch pedal assembly broke while I was driving on the highway. Now I'm unable to put my car in reverse. At this point, it's barely drivable. *tr

NHTSA complaint #10405824
Apr 10, 2011power train

My rx8 2005 have a problem with the clutch. It some how broke and now I change change into gear. My car only have 46xxx mile on it so its shouldnt be breaking and also I read a lot of site saying other rx8 owner also having the same problem. *tr

NHTSA complaint #10395416
Dec 28, 2010power train

2005 Mazda rx8; excessive squeaking noise from clutch pedal upon engagement and disengagement and feels loose. *tr

NHTSA complaint #10373172
Oct 13, 2010power train

Tl*the contact owns a 2005 Mazda RX-8. While driving in stop and go traffic the bracket that holds the pedal in place broke and the clutch pedal fell to the floor. The vehicle was towed to the contacts residence. The vehicle was not inspected or repaired. The VIN was not available. The failure and current mileages were 102000.

NHTSA complaint #10360340
Sep 8, 2010power train

Identical to NHTSA action number: pe09045 my clutch pedal assembly failed. Clutch un-usable. 1. No warning 2 clutch pedal goes limp, falls to the floor unusable 3. Clutch pedal assembly and mastercylinder replaced(due to bent rod caused by failure). *tr

NHTSA complaint #10354477
Aug 31, 2010power train
Over the past two weeks or so the clutch pedal on my 2005 Mazda RX-8 had been making a squeaking noise whenever depressed. The noise subsided after a few hours of driving. However, this past monday (8/30/2010), when I was stopped at a stop light I heard a soft crack. I proceeded through the intersection where shifting from 2 to 3rd I heard an even larger snap and the pedal… Read more

Over the past two weeks or so the clutch pedal on my 2005 Mazda RX-8 had been making a squeaking noise whenever depressed. The noise subsided after a few hours of driving. However, this past monday (8/30/2010), when I was stopped at a stop light I heard a soft crack. I proceeded through the intersection where shifting from 2 to 3rd I heard an even larger snap and the pedal depressed completely to the floor and I had to cut across a few lanes of traffic and safely managed to get to a gas station. The car was no longer able to change gears and the entire clutch pedal assembly had to be replaced. *tr

NHTSA complaint #10353114
Aug 18, 2010power train

Clutch dosent come back all the way up. *tr

NHTSA complaint #10350383
Aug 10, 2010power train
2 days before the incident the clutch made a clicking sound. I looked down and saw no problem. I was driving down the road and the car would not go into gear because the clutch pedal assembly had gave way. I was able to turn off the car and get it into 1st and had to drive home in 1st gear. I have been looking through forums online and this seems to be a very frequent… Read more

2 days before the incident the clutch made a clicking sound. I looked down and saw no problem. I was driving down the road and the car would not go into gear because the clutch pedal assembly had gave way. I was able to turn off the car and get it into 1st and had to drive home in 1st gear. I have been looking through forums online and this seems to be a very frequent occurrence. I also got a ticket for failure to yield and causing an accident 350.00 dollars. I called Mazda and they even told me it was a common occurrence. Im working on the issue now but Mazda wants 1150.00 dollars to fix a "common" problem. Its completely ridiculous. Ive counted over 150 different people who this has happened to but just got it fixed on Mazda forums and other auto forums. Many of them caused accidents as well. I just dont want this to happen to someone and they get killed because of it.. It was the clutch pedal assembly. *tr

NHTSA complaint #10348430
Jul 14, 2010power train

While driving normally 7/14/2010, the clutch bracket on my 2005 Mazda RX-8 snapped, rendering the clutch pedal inoperable. There was no accident only because this happened in a parking lot and I was able to disengage gear and shift to neutral. *tr

NHTSA complaint #10343357
Jun 2, 2010power train
I had just backed out of a driveway on to a side street about to pull on to a main highway, I had put my car into first gear and it did so fine and I was accelerating and went to shift into second gear and went to push in my clutch and I could not find it for a second it was stuck and pushed slightly behind my brake, so I just pulled my car into neutral and pulled off to the… Read more

I had just backed out of a driveway on to a side street about to pull on to a main highway, I had put my car into first gear and it did so fine and I was accelerating and went to shift into second gear and went to push in my clutch and I could not find it for a second it was stuck and pushed slightly behind my brake, so I just pulled my car into neutral and pulled off to the side of the road I had some breaking but not full braking. I found that the clutch pedal bracket had failed, a spot weld on the frame had broke and caused my clutch to move freely, this has never happened to me before, I will have to pay for a new part out of my pocket although I was doing research online and found this has happened alot on Mazda rx8's. *tr

NHTSA complaint #10334186
May 26, 2010power train

Clutch pedal in my 2005 rx8 broke while driving, leaving it nearly impossible to shift gears. It's a known issue among rx8 drivers, but Mazda has so far refused to issue a recall. *tr

NHTSA complaint #10332314
May 11, 2010power train
I was driving my 2005 Mazda RX-8 home, and after a normal drive home with no issues, I was going from 1st gear to 2nd near my house and the clutch pedal dropped to the floor, the clutch wouldn't release and I couldn't change gears. Had this happened a dozen shifts earlier, I would have been caught in a highway merge, and my safety seriously endangered. Upon inspection when I… Read more

I was driving my 2005 Mazda RX-8 home, and after a normal drive home with no issues, I was going from 1st gear to 2nd near my house and the clutch pedal dropped to the floor, the clutch wouldn't release and I couldn't change gears. Had this happened a dozen shifts earlier, I would have been caught in a highway merge, and my safety seriously endangered. Upon inspection when I managed to baby the car in 1st gear home, the clutch pedal had broken at the bracket. Under no circumstances should a clutch pedal break. I had the car towed to the dealership, and fully expect replacement without charge, but based on what I've read, that's not going to happen, despite my extended bumper to bumper warranty. *tr

NHTSA complaint #10330016
Apr 15, 2010power train

I drive a 2005 Mazda RX-8 mt. It has around 73k miles. The clutch started squeaking couple of days back and yesterday when the traffic light turned green I engaged the clutch and I heard a snapping sound. I could not engage the gear later and had to get my car towed. I took it to the garage and I am told that the clutch bracket is broken. *tr

NHTSA complaint #10325873
Apr 12, 2010power train
Tl*the contact owns a 2005 Mazda RX-8. The contact was driving approximately 15 MPH attempting to make a turn. The gear selector was shifted into first gear and the clutch traveled to the floor. The vehicle was towed to an independent mechanic. The failure was contributed to the clutch assembly. The estimated cost to replace the clutch assembly was $390.00. The vehicle had not… Read more

Tl*the contact owns a 2005 Mazda RX-8. The contact was driving approximately 15 MPH attempting to make a turn. The gear selector was shifted into first gear and the clutch traveled to the floor. The vehicle was towed to an independent mechanic. The failure was contributed to the clutch assembly. The estimated cost to replace the clutch assembly was $390.00. The vehicle had not been repaired at the time of the complaint. The contact was in the process of notifying the manufacturer. The failure and current mileages were 63,400. Updated 06/08/10. *lj updated 09/28/10

NHTSA complaint #10325084
Apr 2, 2010power train
While driving northbound on I-75 in downtown atlanta in stop-and-go traffic conditions, the clutch pedal in my 2005 Mazda RX-8 suddenly made a cracking sound and fell to the floor. The clutch remained about 1" from the floor, allowing minimal disengagement of the transmission, sufficient to allow me to return the car to the dealer. The diagnosis was a broken clutch pedal,… Read more

While driving northbound on I-75 in downtown atlanta in stop-and-go traffic conditions, the clutch pedal in my 2005 Mazda RX-8 suddenly made a cracking sound and fell to the floor. The clutch remained about 1" from the floor, allowing minimal disengagement of the transmission, sufficient to allow me to return the car to the dealer. The diagnosis was a broken clutch pedal, resulting in damage to the master cylinder. There had been some creaking at the top of the return of the clutch pedal over the past 2-3 weeks.

NHTSA complaint #10323457
Mar 12, 2010power train
While driving a 2005 Mazda rx8 I lost control after shifting from 5 to 4th gear. The clutch pedal stuck in and moved slightly right near the break pedal and would not release. This surprised me which caused me to run off the side of the road. I called a tow company to transport the vehicle back to the toyota dealer where I bought it used with 58000 miles on it. They said the… Read more

While driving a 2005 Mazda rx8 I lost control after shifting from 5 to 4th gear. The clutch pedal stuck in and moved slightly right near the break pedal and would not release. This surprised me which caused me to run off the side of the road. I called a tow company to transport the vehicle back to the toyota dealer where I bought it used with 58000 miles on it. They said the clutch had to be replaced for 1400 dollars. At the time I didn't have the money so I asked for it to be towed back to a local garage. My local garage found that the clutch pedal assemble broke away from the mounting plate. This is a part that you would not expect to break. All indications point to a faulty weld. The metal ripped from the point of a spot weld. This spot weld may have weakened what is relatively thin metal for this use. I had a local garage replace the part for 500 dollars with parts and labor. The car was still under the original guarantee but Mazda refused to pay for any of the cost because it was not repaired by Mazda. All I wanted was the cost of the part. I explained to them that I have a safety concern if this were to happen to someone at highway speeds. *tr

NHTSA complaint #10319146
Mar 11, 2010power train
1. Driving on the freeway at about 50 MPH exiting off a long off ramp. 2. Clutch pedal broke. Pushed clutch in and heard a loud "crack!". Barely got the car into first gear and into a parking lot where it was doa and had to be towed. The pedal was bent and nearly stuck behind the brake pedal. 3. No repair. Dealer asking $595 to repair. I can't afford it (I am unemployed and… Read more

1. Driving on the freeway at about 50 MPH exiting off a long off ramp. 2. Clutch pedal broke. Pushed clutch in and heard a loud "crack!". Barely got the car into first gear and into a parking lot where it was doa and had to be towed. The pedal was bent and nearly stuck behind the brake pedal. 3. No repair. Dealer asking $595 to repair. I can't afford it (I am unemployed and couldn't find a single job in a year and a half). *tr

NHTSA complaint #10318989
Mar 2, 2010power train
Information redacted pursuant to the freedom of information act (foia), 5 u.s.c. 552(b)(6) around 30 days ago I heard a "pop" sound when I depressed the clutch pedal of my 2005 Mazda RX-8. It felt a little softer after the "pop" sound. I thought something had broken but could not see anything and the clutch seemed to work ok. However, over the next 30 days, it became… Read more

Information redacted pursuant to the freedom of information act (foia), 5 u.s.c. 552(b)(6) around 30 days ago I heard a "pop" sound when I depressed the clutch pedal of my 2005 Mazda RX-8. It felt a little softer after the "pop" sound. I thought something had broken but could not see anything and the clutch seemed to work ok. However, over the next 30 days, it became harder and harder to get the manual transmission into reverse. On february 23, 2010, I brought my 2005 Mazda RX-8 to congressional Mazda in rockville, md to have my clutch inspected. The dealer informed me the clutch pedal assembly bracket was broken and needed to be replaced. The quote was over $500 so I said I would bring the car back in when I had the money. However, when I drove away I could not shift out of 1st gear and the car was not drivable. I immediately drove back to the dealer in 1st gear and asked them to order the part and replace the clutch pedal assembly bracket. When the clutch pedal assembly was replaced, the car shifted fine. I have the broken clutch pedal assembly and I can see clearly that the metal on one side of the mounting bolt has torn apart making it impossible to fully engage the clutch. That must have been the "pop" sound I heard. I have 77,000 miles on my RX-8. I drive the car to work, not on competitive or challenging tracks or courses. I am very concerned that Mazda used poor quality metal and/or poor quality spot welds in constructing the clutch pedal assembly on the 2005

NHTSA complaint #10315939
Feb 22, 2010power train
I own a 2005 Mazda rx8 with 30k miles. I noticed a squeaking noise when applying my clutch pedal approx a month ago. The other evening while I was attempting to pull onto a busy road the clutch made a loud popping noise when I applied the clutch and I was unable to put it into gear. Luckily I was able to roll back to a safe place and wait for a tow. Mazda informed me this is… Read more

I own a 2005 Mazda rx8 with 30k miles. I noticed a squeaking noise when applying my clutch pedal approx a month ago. The other evening while I was attempting to pull onto a busy road the clutch made a loud popping noise when I applied the clutch and I was unable to put it into gear. Luckily I was able to roll back to a safe place and wait for a tow. Mazda informed me this is not a warranty item & I will be responsible to pay for the repair. I've read other complaints and this is a safety issue. Had I been able to pull into traffic and it broke, I would not of been able to shift which would have left me in a very unsafe situation. I'm very disappointed that Mazda is not willing to replace this part w/o a charge. I think this should be looked into. *tr

NHTSA complaint #10312729
Jan 25, 2010power train
I've been hearing this squeaking sound coming from my clutch for the past few months. Approximately a month ago I was driving home when I felt/heard a popping sound. My clutch pedal was now almost to the floor. I assumed my clutch was gone but the car still drove home I was 1/2 mile from home. I drove slowly and carefully home. I had the car towed to Mazda today and they… Read more

I've been hearing this squeaking sound coming from my clutch for the past few months. Approximately a month ago I was driving home when I felt/heard a popping sound. My clutch pedal was now almost to the floor. I assumed my clutch was gone but the car still drove home I was 1/2 mile from home. I drove slowly and carefully home. I had the car towed to Mazda today and they informed me that my clutch bracket is broken. The estimate to replace this is roughly 500$. *tr

NHTSA complaint #10302209
Jan 17, 2010power train

My clutch pedal snapped again for the 3rd time in 2 years, !@#$%??? When is Mazda resolve this issue?? Until some one dies???? *tr

NHTSA complaint #10300049
Jan 7, 2010power train
I own a 2005 Mazda RX-8 with 51xxx miles on it. Driving home I stepped onto the clutch prion to a turn and snap! The car was locked in second gear and the clutch pedal was not returning to its normal position. Only a few miles home, I realized the clutch pedal bracket broke on the left side around the bolt. It looks like it was cheaply made and poorly welded. I also got… Read more

I own a 2005 Mazda RX-8 with 51xxx miles on it. Driving home I stepped onto the clutch prion to a turn and snap! The car was locked in second gear and the clutch pedal was not returning to its normal position. Only a few miles home, I realized the clutch pedal bracket broke on the left side around the bolt. It looks like it was cheaply made and poorly welded. I also got online and found out that this is a common problem. This could have been a lot worse if I was traveling at a higher speed and got locked in gear. I am taking the car to a dealership to replace the bracket. *tr

NHTSA complaint #10298663
Dec 27, 2009power train, structure
I bought a used Mazda rx8 (2005 with about 60 thousand miles) with a manual transmission. After about 3 months of daily driving (no racing or hard shifting) my clutch pedal broke while approaching a red light. The bracket that holds the pedal in place broke due to its very thin metal design. Upon researching the issue online I have found that many RX-8 owners are having the… Read more

I bought a used Mazda rx8 (2005 with about 60 thousand miles) with a manual transmission. After about 3 months of daily driving (no racing or hard shifting) my clutch pedal broke while approaching a red light. The bracket that holds the pedal in place broke due to its very thin metal design. Upon researching the issue online I have found that many RX-8 owners are having the same issue. I have installed a reinforced bracket at my own expense and still need to make some adjustments because it has unaligned the gears in the transmission. If this break would have occurred at any other time I believe it could easily result in serious injury or death. I spend a lot of time on the highway getting to school and I believe that at 65 MPH this break would have at least destroyed the transmission. This issue needs to be resolved and a recall must be implemented. *tr

NHTSA complaint #10297060
← All 2005 Mazda RX-8 problems & recalls