ABS module malfunction all four wheel speed sensor not read in the same time and powersteering cut off cause by unready wheel speed check engine light ABS light and steering light on.
2010 Mazda Mazda3 wheels problems
54 owners reported wheels problems — 8% of all 686 complaints about the 2010 Mazda Mazda3.
Wheels complaints by Mazda Mazda3 year
What owners report
As the original owner, I have now experienced (4) faulty/broken/corroded valve stem as part (attached to the TPMS-tire pressure monitor system). This happened over the course of 12 years. I do believe all of them were oem parts. All of them broke when attempting to air up the tire. It is a safety issue because once broke, you can no longer put air into the tire. The first… Read more
As the original owner, I have now experienced (4) faulty/broken/corroded valve stem as part (attached to the TPMS-tire pressure monitor system). This happened over the course of 12 years. I do believe all of them were oem parts. All of them broke when attempting to air up the tire. It is a safety issue because once broke, you can no longer put air into the tire. The first occurrence was while still under warranty and I had to argue with the Mazda dealer to replace it . The dealership gave me some sort of unofficial receipt which I actually kept, found, and attached to this complaint form. During my second set of tires, sams club graciously replaced 2 more as part of their tire warranty package (I dont think they documented this on their receipts). Now, what I believe to be the final oem stem left has broke. Unfortunately, I have a third set of tires through costco and they wont replace without a fee. This should be a safety recall absolutely no doubt in my experience!
ABS, and traction control dash board lights are on. The ABS relay is faulty, so the ABS module needs to be replaced
Mazda3 factory-installed tire inflation valve stems are prematurely failing resulting in an immediate tire deflation with no prior warning or indication of failure. Failures have occurred when the car was parked and when moving. There was no prior indication (I.e. No warning or slow loss of pressure) of a problem with the valve. Prior to this vehicle, I have never had a tire… Read more
Mazda3 factory-installed tire inflation valve stems are prematurely failing resulting in an immediate tire deflation with no prior warning or indication of failure. Failures have occurred when the car was parked and when moving. There was no prior indication (I.e. No warning or slow loss of pressure) of a problem with the valve. Prior to this vehicle, I have never had a tire inflation valve stem fail in the 35+ years I have owned vehicles. However, this has happened three times to this specific vehicle (which we purchased in 2014) with the most recent occurrence happening today, 16 jan 2019. A quick internet search revealed this is a wide-spread problem with Mazda 3 tire inflation valve stems. I've attached pictures of today's failure as well as an exemplar website printout of identical complaints by other Mazda owners. Given the unwarned and rapid failure of these valve stems, this is an immediate safety hazard due to the potential loss of control should the tire inflation valve stem fail at highway speeds, especially during adverse weather.
Was traveling at highway speeds on the bypass when the valve stem and TPMS sensor broke off and immediately deflated the tire shaking the vehicle violently and almost causing driver to lose control. Have brought this complaint to Mazda in the past and they said they know that it is caused by using dissimilar metals on the TPMS sensor causing erosion to the stem and ultimately… Read more
Was traveling at highway speeds on the bypass when the valve stem and TPMS sensor broke off and immediately deflated the tire shaking the vehicle violently and almost causing driver to lose control. Have brought this complaint to Mazda in the past and they said they know that it is caused by using dissimilar metals on the TPMS sensor causing erosion to the stem and ultimately the stem breaking off. This TPMS sensor was already replaced on the vehicle at the tire change interval and still failed long before the vehicle was due for another set of tires. Mazda knows these are defective and refuses to do anything about it. I'd rather not have TPMS and not know what my tire pressures are than to have that system endanger myself or my family any more. It is currently more dangerous to use these defective faulty TPMS sensors than it is to not have them. That should tell you something...
TPMS/valve stem assembly failed suddenly causing an immediate lost of air in the tire on 2-lane marked highway(posted speed limit 55mph)