The forward collision/emergency brake engages when it is not needed, necessary or appropriate, and even when the brake pedel is already being pressed. I have adjusted the sensitivity of the emergency braking and forward collision system and I still have this issue.
2021 Jeep Wrangler forward collision avoidance problems
16 owners reported forward collision avoidance problems — 2% of all 963 complaints about the 2021 Jeep Wrangler.
Forward collision avoidance complaints by Jeep Wrangler year
What owners report
My 2021 Jeep Wrangler rubicon (3.6l etorque, automatic transmission) has had recurring drivetrain instability since about 2,000 miles while under factory warranty. It intermittently has high rpm flare during acceleration, delayed shifting, shuddering under load, and abrupt engagement. At low speeds (about 10–5 MPH), it harshly downshifts, grabs suddenly, rpms jump up and down,… Read more
My 2021 Jeep Wrangler rubicon (3.6l etorque, automatic transmission) has had recurring drivetrain instability since about 2,000 miles while under factory warranty. It intermittently has high rpm flare during acceleration, delayed shifting, shuddering under load, and abrupt engagement. At low speeds (about 10–5 MPH), it harshly downshifts, grabs suddenly, rpms jump up and down, and it can feel like it will stall; it has stalled intermittently. Braking feels inconsistent, and at times it feels like the vehicle resists braking or surges before slowing. The forward collision warning/automatic emergency braking has activated with no obstacle present, and the power steering assist has been lost intermittently. There is also an engine tick and a high-pitched whining noise from the engine/drivetrain area. In january 2026, the transmission catastrophically failed and required replacement of the transmission, torque converter, cooler, and control module. The vehicle was out of service for over 24 days. After installation of a new mopar remanufactured transmission and torque converter, the same symptoms returned. Aamco has now found that the new torque converter failed, with metal shavings throughout the transmission, in the fluid, and at the bottom of the pan. I was advised that the vehicle should be sent to a Jeep dealership because no codes are currently present. I was also advised that the dealership may replace only the torque converter rather than the entire transmission, despite
My 2021 Jeep Wrangler rubicon (3.6l etorque, automatic transmission) has experienced recurring drivetrain instability beginning at approximately 2,000 miles while under factory warranty. The vehicle intermittently exhibits a high-rpm flare during acceleration, where the engine speed increases without a commensurate increase in vehicle acceleration. The transmission then… Read more
My 2021 Jeep Wrangler rubicon (3.6l etorque, automatic transmission) has experienced recurring drivetrain instability beginning at approximately 2,000 miles while under factory warranty. The vehicle intermittently exhibits a high-rpm flare during acceleration, where the engine speed increases without a commensurate increase in vehicle acceleration. The transmission then abruptly engages, causing sudden jerking. At low speeds (approximately 10–5 MPH), the vehicle shudders and harshly downshifts, creating a sudden grabbing sensation. Engine rpms fluctuate during deceleration as if the transmission cannot smoothly match engine speed. Braking feels inconsistent, and at times it feels as though the vehicle is accelerating or resisting braking input before abruptly slowing. The vehicle has felt as though it would stall at low speeds and has stalled intermittently. Additionally, the forward collision warning / automatic emergency braking system has activated without an obstacle present. There have also been intermittent instances of loss of power steering assist. The engine has developed a ticking noise and a high-pitched ringing/whining sound from the engine area during operation. In january 2026, the transmission catastrophically failed and required replacement of the transmission, torque converter, cooler, and control module. The vehicle was out of service for over 24 days. Following installation of a mopar remanufactured transmission and torque converter, the same symptoms
Two issues that I want to make known. First is a classic Jeep issue with the death wobble. I currently have the Jeep back in the shop for the current recall and having them fix the wobbling again. This would be the second time that it has happened. Worried because the warranty is about to expire. Next is a problem that I almost forgot about until recently because I started… Read more
Two issues that I want to make known. First is a classic Jeep issue with the death wobble. I currently have the Jeep back in the shop for the current recall and having them fix the wobbling again. This would be the second time that it has happened. Worried because the warranty is about to expire. Next is a problem that I almost forgot about until recently because I started driving a rental Jeep Wrangler. With my Jeep, when I have the adaptive cruse control on, it some times thinks there is a car in front of me when it is in the next lane, and right in the middle of the highway, my Jeep tries to stop because there is a car next to me in its own lane. This has been going on for a while now but I have never gotten it looked at because of the cost. Im going to have both issues looked at during the recall because my extended warranty is ending and im worried that if I dont get it fixed now, im going to have to pay more in the future. Side notes about my Jeep, it was a buy back before I purchased it. Was supposedly fixed. At around 10k miles I had a radiator issue and then needed to have a complete engine replacement. With both of these battery recalls, I have had to get a new battery. Im about to get by 3rd. There has also been hvac issues fixed in the past. I tried to contact Jeep about another buy back, but they denied the claim without even talking to me. Currently working on trying to actually talk to someone.
I was driving 72 miles per hour on 4 lane highway and the steering wheel and front end of the Jeep was vibrating uncontrollably. The cruse control stopped working, I applied the brake and was able to slow down and pull over to the side of the road. No flat tires so I pulled back on to the highway and arrived at my destination without further incident. 10-24-25 the same… Read more
I was driving 72 miles per hour on 4 lane highway and the steering wheel and front end of the Jeep was vibrating uncontrollably. The cruse control stopped working, I applied the brake and was able to slow down and pull over to the side of the road. No flat tires so I pulled back on to the highway and arrived at my destination without further incident. 10-24-25 the same thing happened last week but I thought maybe the lane assist went off because there were no road lines (newly repaved road) but my Jeep doesn't have lane assist. After researching on line I believe what occurred is what they call "death wobble" there were no bumps in the road - the road is in good condition so I'm not certain what prompted the death wobble.