Nov 1, 2026engine
While driving my 2012 Jeep Wrangler sport, the vehicle experienced a sudden and severe loss of engine power due to a cylinder failure on the left/driver-side cylinder head (cylinder #2). This defect causes the engine to experience persistent cylinder misfires, resulting in severe engine stumbling, hesitation, and a dangerous drop in acceleration capabilities. This creates an… Read more
While driving my 2012 Jeep Wrangler sport, the vehicle experienced a sudden and severe loss of engine power due to a cylinder failure on the left/driver-side cylinder head (cylinder #2). This defect causes the engine to experience persistent cylinder misfires, resulting in severe engine stumbling, hesitation, and a dangerous drop in acceleration capabilities. This creates an immediate safety hazard when attempting to merge onto high-speed highways, pull out into active traffic, or navigate intersections, as the vehicle cannot accelerate predictably to match traffic speeds. Furthermore, the persistent misfire causes unburned fuel to dump into the exhaust system, creating a secondary risk of catalytic converter overheating, damage to the exhaust system, and a potential engine bay fire hazard. This vehicle has only 86,000 original miles. This specific 3.6l pentastar engine generation is subject to a widely documented manufacturing defect involving premature valve seat and head failure, which manifests as an unpredictable and sudden loss of motive power while the vehicle is in motion.
NHTSA complaint #11774932
Jul 7, 2026engine
The engine's cylinder head/valve train has failed internally, allowing combustion gases to enter the cooling system — confirmed via a chemical block test performed by a master automotive technician on november 29, 2024, which verified combustion gases present in the coolant. This is a widely documented defect on this engine and model year, related to valve seat erosion in the… Read more
The engine's cylinder head/valve train has failed internally, allowing combustion gases to enter the cooling system — confirmed via a chemical block test performed by a master automotive technician on november 29, 2024, which verified combustion gases present in the coolant. This is a widely documented defect on this engine and model year, related to valve seat erosion in the cylinder head. Symptoms first appeared in june 2018 as an unusual higher-pitched, stressed sound from the engine. Over time this progressed to recurring, confirmed misfires on cylinders 1, 2, 3, and 5 (diagnostic codes p0300, p0301, p0302, p0303, p0305) and a mixture control fault (p219b). The check engine light has intermittently stayed illuminated for months at a time, then gone off for extended periods while the same fault codes remain stored and confirmed by a diagnostic scanner — currently the light is off but the codes persist. The vehicle frequently runs rough enough that the engine must be turned off and restarted to temporarily return to closer-to-normal operation. Noticeable vibration is felt during much of this pattern. Spark plugs, ignition coils, oxygen sensors, and the pcv valve have all been inspected/replaced and ruled out as the cause on multiple occasions over more than a year, isolating the cause to the cylinder head itself. This creates a driveability and potential stalling/hesitation risk, though no crash, injury, or fire has occurred to date. The vehicle has not been formally ins
NHTSA complaint #11748922
Apr 1, 2026engine, engine and engine cooling
The contact owns a 2012 Jeep Wrangler. The contact stated that while driving at 20 MPH, the check engine warning light illuminated. The local dealer was contacted, but the vehicle was not diagnosed or repaired. The vehicle was taken to an independent mechanic, where a scan was completed, and diagnostic trouble codes for the emissions, engine misfire, timing chain, and crank… Read more
The contact owns a 2012 Jeep Wrangler. The contact stated that while driving at 20 MPH, the check engine warning light illuminated. The local dealer was contacted, but the vehicle was not diagnosed or repaired. The vehicle was taken to an independent mechanic, where a scan was completed, and diagnostic trouble codes for the emissions, engine misfire, timing chain, and crank position sensor failures were displayed. The manufacturer was not contacted. The failure mileage was approximately 71,756.
NHTSA complaint #11728445
Mar 26, 2026electrical system, air bags, engine
My complaint is that I was sold a dangerously defective vehicle with a known, unrepaired “stop driving” airbag safety recall, was not warned about the deadly risk, and am now being told to move and tow the car in direct contradiction to official safety instructions. ### factual background - the vehicle I purchased has a takata‑type airbag safety recall that carries a formal… Read more
My complaint is that I was sold a dangerously defective vehicle with a known, unrepaired “stop driving” airbag safety recall, was not warned about the deadly risk, and am now being told to move and tow the car in direct contradiction to official safety instructions. ### factual background - the vehicle I purchased has a takata‑type airbag safety recall that carries a formal “do not drive” or “stop driving” warning because the airbag can explode and kill or severely injure occupants, even in a minor crash.[1][2][3][4] - federal safety authorities have confirmed that at least 28–29 people in the united states have been killed and more than 400 injured by exploding takata airbag inflators.[3][4][5][1] - I received the recall notice about two months ago, but I was told the repair parts were back‑ordered, which delayed fixing the deadly defect through no fault of my own.[1][3] - during this delay, the vehicle’s battery became completely dead, and I am now being told by the recall and towing company that I must make sure the car is taken out of the garage, which would require entering and moving a vehicle I have been legally and explicitly told not to drive. ### legal and safety concerns - official guidance from the national highway traffic safety administration (NHTSA) and the manufacturer is that vehicles under this takata “do not drive” recall must not be driven at all until the defective airbag is replaced, because even a minor collision can cause the inflator to explode
NHTSA complaint #11727336
Oct 29, 2025engine
The vehicle exhibits a persistent valvetrain ticking noise associated with the rocker/lifter/cam components of the 3.6l pentastar v6. The engine makes a rhythmic metallic tapping at idle and during acceleration. The noise has progressively worsened, leading to rough idle and occasional misfires. This issue is documented in multiple stellantis technical service bulletins (e.g.,… Read more
The vehicle exhibits a persistent valvetrain ticking noise associated with the rocker/lifter/cam components of the 3.6l pentastar v6. The engine makes a rhythmic metallic tapping at idle and during acceleration. The noise has progressively worsened, leading to rough idle and occasional misfires. This issue is documented in multiple stellantis technical service bulletins (e.g., tsb 09-015-24 and tsb 09-011-25) which attribute the noise to hydraulic lash adjuster and cam/rocker wear. If unaddressed, the failure can cause camshaft damage, metal debris contamination, loss of power and potential engine stall, posing a safety risk. The vehicle is available for inspection. The problem has been confirmed by independent mechanics who recommend replacement of the rocker arms, lifters and camshaft to prevent catastrophic engine failure.
NHTSA complaint #11696485
Sep 30, 2025engine
The vehicle exhibits a persistent valvetrain ticking noise associated with the rocker/lifter/cam components of the 3.6l pentastar v6. The engine makes a rhythmic metallic tapping at idle and during acceleration. The noise has progressively worsened, leading to rough idle and occasional misfires. This issue is documented in multiple stellantis technical service bulletins (e.g.,… Read more
The vehicle exhibits a persistent valvetrain ticking noise associated with the rocker/lifter/cam components of the 3.6l pentastar v6. The engine makes a rhythmic metallic tapping at idle and during acceleration. The noise has progressively worsened, leading to rough idle and occasional misfires. This issue is documented in multiple stellantis technical service bulletins (e.g., tsb 09-015-24 and tsb 09-011-25) which attribute the noise to hydraulic lash adjuster and cam/rocker wear. If unaddressed, the failure can cause camshaft damage, metal debris contamination, loss of power and potential engine stall, posing a safety risk. The vehicle is available for inspection. The problem has been confirmed by independent mechanics who recommend replacement of the rocker arms, lifters and camshaft to prevent catastrophic engine failure.
NHTSA complaint #11690582
Aug 31, 2025engine
Timing chain and misfire bank 1 and bank 2 crank shaft and crank sensor issues.
NHTSA complaint #11684159
Jun 6, 2025engine
I am reporting a persistent and safety-relevant defect in my 2012 Jeep Wrangler with the 3.6l pentastar engine. The vehicle is experiencing misfires on multiple cylinders, especially cylinders 1 and 5, triggering codes p0300, p0301, and p0305. These misfires result in loss of power, hesitation, and rough idle, creating serious safety concerns during acceleration or highway… Read more
I am reporting a persistent and safety-relevant defect in my 2012 Jeep Wrangler with the 3.6l pentastar engine. The vehicle is experiencing misfires on multiple cylinders, especially cylinders 1 and 5, triggering codes p0300, p0301, and p0305. These misfires result in loss of power, hesitation, and rough idle, creating serious safety concerns during acceleration or highway driving. Despite replacing spark plugs, ignition coils, the crankshaft position sensor, purge valve, and both oxygen sensors, the problem continues. The vehicle has just 83,000 miles and is currently at a certified third-party repair facility. Multiple mechanics believe the issue stems from known defects in the left (bank 1) cylinder head or valve train components—an issue chrysler previously acknowledged via tsbs and a 10yr/150k mile extended warranty on select vins. I contacted Jeep cares and requested goodwill support, but they refused to even discuss the issue because my Jeep is not at a dealership. This leaves owners like me with limited, expensive options despite being affected by a well-documented defect. Jeep forums and independent shops have seen widespread misfire problems on early 3.6l pentastar engines, especially 2012-2013 models. I urge NHTSA to investigate this pattern of failure. The misfires impact driveability and safety, and the manufacturer has not offered sufficient resolution or consistent support to affected customers. I’m happy to provide additional information, documentation, or
NHTSA complaint #11665284
Jan 30, 2025engineFire
Engine spontaneously caught fire. It had been parked for hours before it happened. Everything under the hood was totaled
NHTSA complaint #11639631
Oct 15, 2024service brakes, air, traction control system, engine
The contact owns a 2012 Jeep Wrangler. The contact stated that while operating the vehicle the ABS, traction control and check engine warning lights had remained illuminated. The contact indicated that while pressing the brake pedal to stop, the brake pedal extended to the floor causing the braking distance to become extended. The vehicle was taken to the local dealer who… Read more
The contact owns a 2012 Jeep Wrangler. The contact stated that while operating the vehicle the ABS, traction control and check engine warning lights had remained illuminated. The contact indicated that while pressing the brake pedal to stop, the brake pedal extended to the floor causing the braking distance to become extended. The vehicle was taken to the local dealer who diagnosed that the ABS module was faulty and needed to be replaced. The vehicle was not yet repaired. The manufacturer was notified of the failure but no assistance was offered. The failure mileage was 55,000.
NHTSA complaint #11619915
Jan 4, 2024engine
In my 2012 Jeep I had to replace the engine and catalytic converters. The engine number 3 cylinder failed due to excessive ware causing lower compression. After the engine (long block) was replaced, one of the cylinders was miss firing. This miss firing was traced to micro cracks in the plastic/composite intake manifold (original and not part of the engine replacement).… Read more
In my 2012 Jeep I had to replace the engine and catalytic converters. The engine number 3 cylinder failed due to excessive ware causing lower compression. After the engine (long block) was replaced, one of the cylinders was miss firing. This miss firing was traced to micro cracks in the plastic/composite intake manifold (original and not part of the engine replacement). Because these micro cracks changed the fuel air ratio on specific cylinders by leaning out the cylinders near the cracks this lean mixture would cause the affected cylinders to run hot that would lead to both the excessive ware on the one cylinder and would comprise the catalytic converters. Because this change in fuel air mixture was caused by the intake manifold and Jeep does not have any inspection requirements or methods for this item and even after the Jeep dealer did a full diagnosis using their factory specified equipment the issue with the manifold was not found. My local ammco shop found the cracking in the manifold that was the route cause of the problem.
NHTSA complaint #11563525
Dec 28, 2023engine
Jeep Wrangler 3.6 liter 90k miles lifter making loud noise. Seems you had a recall about this on the 2012 and guess I missed out
NHTSA complaint #11562348
Oct 11, 2023engine
6 days after an oil change, the temp gauge while driving went from cool to hot in under a mile and the engine temp light came on. There was coolant all over the underside of the car it was near catastrophic. I had to have it towed to the dealership for repairs. The faulty part was the oil filter adapter it was cracked by over tightening of the oil filter.
NHTSA complaint #11549495
Apr 4, 2023power train, engine, fuel/propulsion system
Engine stalls randomly while driving. Will crank over several times and over approx 10-15 min. Of cranking(say every 3-5min) vehicle will and will restart. No check engine lights and no warning. The loss of power can be dangerous since brake and steering assist require engine to be running. Vehicle will be fine for several days local commute and problem will recur without… Read more
Engine stalls randomly while driving. Will crank over several times and over approx 10-15 min. Of cranking(say every 3-5min) vehicle will and will restart. No check engine lights and no warning. The loss of power can be dangerous since brake and steering assist require engine to be running. Vehicle will be fine for several days local commute and problem will recur without warning, usually on longer commute. Vehicle is unsafe and unpredictable.
NHTSA complaint #11515380
Dec 7, 2022engine
Cam sensor failed. Check engine light and traction control light appeared. Replaced and same problems occurred. May be wiring or cam/rocker issues.
NHTSA complaint #11496427
Nov 17, 2022engine
The contact owns a 2012 Jeep Wrangler. The contact stated while starting the vehicle, there was an abnormal burning odor around the vehicle. The contact stated while driving 45 MPH and other various speeds the burning odor was still present. The check engine warning light illuminated with the temperature gauge rising from normal to hot. An audible alarm was heard during the… Read more
The contact owns a 2012 Jeep Wrangler. The contact stated while starting the vehicle, there was an abnormal burning odor around the vehicle. The contact stated while driving 45 MPH and other various speeds the burning odor was still present. The check engine warning light illuminated with the temperature gauge rising from normal to hot. An audible alarm was heard during the failure. The vehicle was driven to the residence and then towed to a dealer. The vehicle was diagnosed and determined that the radiator needed to be replaced. The contact had the vehicle towed to an independent mechanic who determined that coolant was leaking into the cylinder head. The vehicle had not been repaired. The manufacturer had been informed of the failure. The failure mileage was approximately 60,000.
NHTSA complaint #11494026
Jul 12, 2022power train, engine
While driving the car randomly stalls. I lose power steering and braking. The car will not restart. This issue has been recorded by the dealer. The vehicle was last inspected on july 5th. I have been issued a Jeep care case manager, case # 82963828. There are no warnings, while driving makes a left-hand turn the car just stalls!
NHTSA complaint #11473598
Jul 4, 2022power train, electrical system, engine
While driving making a turn, shifting from 1st to 2nd gear, and vehicle stalls losing all power. I had a crank no-start scenario! The vehicle has been to the dealer multiple times and the issue can not be duplicated. The vehicle has been inspected multiple times and there are no known issues. No-fault codes are thrown. I was able to cost to a safe location, and wait. After 3-5 min the vehicle restarted.
NHTSA complaint #11472279
Jul 4, 2022power train, electrical system, engine
While driving making a turn, shifting from 1st to 2nd gear, and vehicle stalls losing all power. I had a crank no-start scenario! The vehicle has been to the deal multiple times and the issue can not be duplicated. The vehicle has been inspected multiple times and there are no known issues. No-fault codes are thrown. I was able to cost to a safe location, and wait. After 3-5 min the vehicle restarted.
NHTSA complaint #11472278
Jul 4, 2022power train, engine, fuel/propulsion system
While driving making a turn, shifting from 1st to 2nd gear, and vehicle stalls losing all power. The vehicle has been to the deal multiple times and the issue can not be duplicated. The vehicle has been inspected multiple times and there are no known issues. No-fault codes are thrown. I stalled in the middle of a busy intersection, with my children in the car. I had to push the vehicle to safety!
NHTSA complaint #11472276
Jul 4, 2022power train, electrical system, engine
Starting out at a stop sign. Engaging the clutch to start moving, while shifting into 2nd gear while turning the vehicle stalls. Losing all power steer and brakes. I try to re-start the car I get a crank no-start scenario. Wait 3-5 min, retry starting the vehicle starts.
NHTSA complaint #11472274
Jul 4, 2022power train, electrical system, engine
Starting out at a stop light, engaging the clutch to start moving, I depressed the clutch to shift into second gear while making a turn, the vehicle stalls, losing all power.
NHTSA complaint #11472273
Jun 26, 2022engineFire1 injured
I was driving on the highway and the engine caught fire. I’ve been looking for an engine to rebuild and all of them had previously been on fire. I believe the engine is defective for the jeeps that year, make and model.
NHTSA complaint #11471058
May 28, 2022power train, engine, fuel/propulsion system
While driving the car stalled. Loss of power steering and braking. I was able to coast to a safe location. I tried to restart, but crank- no start.
NHTSA complaint #11466515
May 2, 2022power train, electrical system, engine
Random stalling while driving, making a left-hand turn. While entering an intersection, the vehicle stalled losing all power. Was able to coast to a safe spot. Waited 15 min, the vehicle started. No check engine light.
NHTSA complaint #11463049
May 2, 2022power train, engine, fuel/propulsion system
While crossing an intersection the vehicle stalled for no reason. No codes were posted. Crank no start, waited 10 min, and the vehicle started. Drove to the dealer to resolve. Dealer has no known reason for stalling while driving
NHTSA complaint #11463048
May 2, 2022power train, engine, fuel/propulsion system
While driving making a left-hand turn, crossing an intersection the vehicle stalled. Lossing all power, no power stirring or breaks. When trying to re-start vehicle will not re-start.
NHTSA complaint #11463046
Feb 9, 2022power train, engine
Oil filter housing is cracked and leaking oil. Potential fire hazard, pooling of oil on engine block. Seems to be a widespread problem.
NHTSA complaint #11451187
Jun 11, 2021engine
The contact owns a 2012 Jeep Wrangler. The contact stated that the engine would misfire while driving at various speeds. Due to the failure, the vehicle would independently go into limp mode with the traction control and check engine warning lights illuminated. The contact had taken the vehicle to several unknown dealers and the engine misfire was acknowledged however, the… Read more
The contact owns a 2012 Jeep Wrangler. The contact stated that the engine would misfire while driving at various speeds. Due to the failure, the vehicle would independently go into limp mode with the traction control and check engine warning lights illuminated. The contact had taken the vehicle to several unknown dealers and the engine misfire was acknowledged however, the cause of the failure was not determined. The manufacturer was not notified of the failure. The vehicle was not repaired. The failure mileage was approximately 90,000. The VIN was not available.
NHTSA complaint #11420576
Apr 6, 2021steering, service brakes, engine
I recently purchased a 2012 Jeep Wrangler unlimited (VIN: [xxx]). Within 1 month of taking possession of the vehicle, the car began to stall intermittently while driving. Specifically, the engine shuts off and the power steering and breaks deactivate. To state the obvious, this is a very dangerous condition, particularly as our family has three children under the age of… Read more
I recently purchased a 2012 Jeep Wrangler unlimited (VIN: [xxx]). Within 1 month of taking possession of the vehicle, the car began to stall intermittently while driving. Specifically, the engine shuts off and the power steering and breaks deactivate. To state the obvious, this is a very dangerous condition, particularly as our family has three children under the age of six. To date, larry miller Jeep has been unable to diagnose the issue as no error codes appear. Looking online, this appears to be a known defect with jeeps of my model year (https://www.wranglerforum.com/threads/electrical-problem-shuts-off-while-driving.190041/) so I am surprised that Jeep has not issued a recall related to this problem given the dire potential consequences. I have escalated this matter to your customer care group, but I want to make sure fca has situational awareness of this situation as well. Information redacted pursuant to the freedom of information act (foia), 5 u.s.c. 552(b)(6). *tr
NHTSA complaint #11406714
Mar 31, 2021engine
Oil cooler cracked and leaking antifreeze all over engine and under frame. Antifreeze in the oil. Only 69k miles on the vehicle. This is a really big problem with these oil coolers on jeeps and should be recalled. Cost to replace is very expensive!!
NHTSA complaint #11405719
Feb 27, 2021engine
Oil cooler broke and started leaking after the cold temperature in oklahoma on 2/14/21
NHTSA complaint #11398186
Feb 7, 2021engine
The oil cooler failing, leaking. I have just discovered that my oil cooler is leaking from a puddle on the ground and my lower engine full of oil. I got no warning light. If there had not been a noticable puddle I would have never noticed it. If not my motor would have locked up and would need to be replaced. I checked my oil level and no oil is on the dipstick. I have done… Read more
The oil cooler failing, leaking. I have just discovered that my oil cooler is leaking from a puddle on the ground and my lower engine full of oil. I got no warning light. If there had not been a noticable puddle I would have never noticed it. If not my motor would have locked up and would need to be replaced. I checked my oil level and no oil is on the dipstick. I have done research and found that this is a very big problem in the Jeep community. I strongly feel that this should be recalled and repaired. If it was a here and there incident, it would b different. But it's a very big problem. In the photo look to the left of the oil filter housing. It's a puddle of oil. The price of oil is not cheap. Neither is the time consuming and cost of the repair. Please add this to the recalls for this vehicle.
NHTSA complaint #11395100
Dec 31, 2020electrical system, engine
Car completely dies when sitting idle. I believe the control module is faulty and I have heard many complaints from other dodge/chrysler/Jeep customers about this same issue. My 15 month old son was in the car when this happened and it scared the heck out of me to be sitting at a major stoplight and the car completely die. I was scared for my safety and scared for my son's… Read more
Car completely dies when sitting idle. I believe the control module is faulty and I have heard many complaints from other dodge/chrysler/Jeep customers about this same issue. My 15 month old son was in the car when this happened and it scared the heck out of me to be sitting at a major stoplight and the car completely die. I was scared for my safety and scared for my son's safety. I do not understand how this is not an open recall right now. When the Jeep dies all of the relays start engaging and the dash lights blink on and off. I have had my battery, alternator, and started checked by a licensed mechanic. I do not have any other electrical issues either. Please create a recall for this so my family will be safe when I drive them around.
NHTSA complaint #11385741
Dec 30, 2020engine
Oil leaking from engine. Mechanic said could be dangerous as it was getting on the exhaust and could start a fire. Doing research on this website, found out it is a common problem with a plastic part on top of the engines used by Jeep and chrysler. This should be recalled.
NHTSA complaint #11385712
Dec 30, 2020engine
Oil leaking off top of engine. Cracked plastic part caused oil to leak out on engine and exhaust creating a burning smell and my mechanic said it is a fire hazard. Found many others with same issue from Jeep and chrysler products.
NHTSA complaint #11385676
Oct 5, 2020engine
While driving engine looses power and vibrates excessively, engine light flashes during this process, after about 30 seconds light goes out and engine resumes normal operation. It has done this multiple times sometimes on startup sometimes stopped at a light and other while driving.
NHTSA complaint #11362910
Sep 27, 2020engine
The lifters (headers) have gone bad. Incredible ticking noise from the engine in drive and idle. As rpms increase the ticking is louder. The only way to fix is to replace the headers. I have read a multitude of complaints on the NHTSA page regarding this and additional complaints all over Jeep forums that this is a known issue with the 2012 engines ... Why is this not been recalled?
NHTSA complaint #11361359
Sep 18, 2020electrical system, engine
Jeep loses all power while driving. I have a 1 year old and this is very very dangerous. Ive had to stop and pull battery power terminal off multiple times to reset it. The Jeep completely dies then all lights and switches start firing. Jeep will not restart. Debating selling it and getting something other than a Jeep product. Battery is good and alternator is good. I… Read more
Jeep loses all power while driving. I have a 1 year old and this is very very dangerous. Ive had to stop and pull battery power terminal off multiple times to reset it. The Jeep completely dies then all lights and switches start firing. Jeep will not restart. Debating selling it and getting something other than a Jeep product. Battery is good and alternator is good. I had both checked by a mechanic. This has happened multiple times and I take great care of my Jeep as well.
NHTSA complaint #11355714
Sep 12, 2020electrical system, engine
My Jeep will randomly just shut off while idling in a parking lot or stopped at a ligh. If I turn the key it will start right back up. No check engine lights or codes. I have had it to a mechanic and they can't figure out what is wrong .
NHTSA complaint #11354624