ABS systems not functioning properly, showing engine code u0121 that states lost communication with ABS module. This is a common occurrence with jeeps and is a safety issue due to the ABS system not working properly. Also causes the brakes to randomly engage and disengage.
2008 Jeep Wrangler brakes problems
52 owners reported brakes problems — 6% of all 873 complaints about the 2008 Jeep Wrangler.
Brakes complaints by Jeep Wrangler year
What owners report
The ABS computer brake module is bad in my Jeep. It needs a replacement. Confirmed by chrysler Jeep dealership. However, chrysler does not offer a replacement module. ABS does not work on my vehicle. This is a huge safety issue and is common problem among this year Jeep. Chrysler shouldn’t be allowed to not have a replacement oem ABS module. Huge safety risk and lawsuit
ABS control module has gone out
April 22, 2025 my 2008 Jeep lost power. There was a sequence, where one warning light was followed by another, followed by a complete loss of power. I charged the battery, car started up, I drove to dealer (a 5-minute trip), and by my arrival the Jeep had again lost all power. Dealer checked the vehicle, and told me the battery and charging system were fine, but the ABS… Read more
April 22, 2025 my 2008 Jeep lost power. There was a sequence, where one warning light was followed by another, followed by a complete loss of power. I charged the battery, car started up, I drove to dealer (a 5-minute trip), and by my arrival the Jeep had again lost all power. Dealer checked the vehicle, and told me the battery and charging system were fine, but the ABS brake modulator was draining the power. They have not been able to get another modulator and the vehicle is still at the dealer (crown chrysler Jeep dodge ram dublin, oh). Losing power precipitously presents a safety hazard.
The vehicle requires an ABS module. I have been waiting for over 4 months for part availability. According to dealer they dont have any eta on availability and have been told it may not be something they ever go back to producing. My state requires safety inspection which it will not pass due to this issue. Seems to me that someone needs to be responsible to make a part for these issues.
This is a common flaw with the ABS brake system on many chrysler fiat vehicles and chrysler fiat is doing nothing. My Jeep ABS computer module went bad . No damage, no off roading. Driving on highway and all the brake/ABS/stability control lights lit up on my dash. The ABS showed code “c2200” bad ABS module and must replace. However chrysler stopped making these …in back… Read more
This is a common flaw with the ABS brake system on many chrysler fiat vehicles and chrysler fiat is doing nothing. My Jeep ABS computer module went bad . No damage, no off roading. Driving on highway and all the brake/ABS/stability control lights lit up on my dash. The ABS showed code “c2200” bad ABS module and must replace. However chrysler stopped making these …in back order for years. You have to either get a junk yard part or send your computer away to be refurbished. How can chrysler be allowed to not have a critical safety part in stock…and not cover this in a lifetime warranty. ?? I’ve never had any other vehicle where the ABS computer goes bad . This is insane. And dealer can’t locate the part in the USA because chrysler doesn’t have them.
ABS module yes as I was driving and going to turn left into a shopping center and stepped on the break, I had none, I did almost crash. It happened all of a sudden out of nowhere no lights, no icons lit. The problem has been confirmed by a dealer stating that this is a nationwide issue that’s currently going on that the parts are back ordered because there is nothing in… Read more
ABS module yes as I was driving and going to turn left into a shopping center and stepped on the break, I had none, I did almost crash. It happened all of a sudden out of nowhere no lights, no icons lit. The problem has been confirmed by a dealer stating that this is a nationwide issue that’s currently going on that the parts are back ordered because there is nothing in production right now for the part. The vehicle is not drivable.
The contact owns a 2008 Jeep Wrangler equipped with powerstop brake hoses, part number: (n/a). The contact stated that after installing the brake hoses to the rear driver’s and passenger’s side brake assemblies, there was smoke coming from the rear driver's side brake rotors while operating the vehicle due to brake fluid leaking from the hose. The manufacturer and local dealer… Read more
The contact owns a 2008 Jeep Wrangler equipped with powerstop brake hoses, part number: (n/a). The contact stated that after installing the brake hoses to the rear driver’s and passenger’s side brake assemblies, there was smoke coming from the rear driver's side brake rotors while operating the vehicle due to brake fluid leaking from the hose. The manufacturer and local dealer were notified of the failure. The contact was informed of the NHTSA campaign number: 24e053000 (service brakes, hydraulic). The contact stated that the vehicle had experienced the failure listed in the recall. The failure mileage was not provided.
I have a 2008 Jeep Wrangler rubicon that has a lifetime powertrain warranty. Since I purchased the vehicle in 2008 I have maintained it exactly as required to keep the warranty valid. This includes the 5 year lifetime warranty powertrain inspections which are performed every 5 years. I have documented proof of the inspections. In january 2024 my ABS brakes failed and I went to… Read more
I have a 2008 Jeep Wrangler rubicon that has a lifetime powertrain warranty. Since I purchased the vehicle in 2008 I have maintained it exactly as required to keep the warranty valid. This includes the 5 year lifetime warranty powertrain inspections which are performed every 5 years. I have documented proof of the inspections. In january 2024 my ABS brakes failed and I went to my local dealership where I purchased the vehicle. The dealership service department told me that my ABS module failed with a code of c2200 ABS module internal failure. The part number is 68030936-ab. The dealership said they ordered the part from the manufacturer. Since january 09, 2024 I have called the dealership about the ABS module. They told me I could drive the vehicle and that it would brake, but the antilock brakes would not work. This ABS module also controls the electronic stability program, and that does not work either. Chrysler has not manufactured the broken part. Chrysler sold me the vehicle with a lifetime powertrain warranty and this part is included in the warranty. However, chrysler has failed to provide a replacement part or offered another vehicle to safely drive.
ABS brakes not working on my Jeep. Was told by dealer that it needs a new ABS module, but nobody has the part. How can I drive my vehicle when my ABS brakes are not working and you don't provide the part to fix it? The one dealer in texas that has the part jacked up the price for it. That is price gouging, which is against the law. Chrysler is and will be responsible for any accident cause due to this issue.
On my 2008 Jeep Wrangler the driver’s rear drum hard brake line bursted completely and almost split in half, leaking fluid. The hard brake line follows the frame rail, and this breakage occurred at the 90° bend above the transmission cross support. My safety, my passengers safety, as well as others on the road were at risk when the brake failure occurred. While operating the… Read more
On my 2008 Jeep Wrangler the driver’s rear drum hard brake line bursted completely and almost split in half, leaking fluid. The hard brake line follows the frame rail, and this breakage occurred at the 90° bend above the transmission cross support. My safety, my passengers safety, as well as others on the road were at risk when the brake failure occurred. While operating the vehicle on a decline, brake pedal began to sink to the floor and the “brake” e-brake warning indicator began flashing and dinging. There were no prior indications of the issue. Thankfully I was able to slow down my vehicle by shifting down and using my e-brake. Had vehicle towed and private mechanic inspected and performed repairs, mopar/chrysler no longes makes this part and a custom bent hard line had to be created. Attempted to contact chrysler 3 times regarding the safety issue this posed, they referred me to the dealer 1st call. I spoke with a mechanic at my local dealer whom agreed with me that the hard line had no reason to break given the location of the damage and that it’s a non-wear item. The mechanic suggested I call back the 1-800 number to continue with reporting my safety concerns to the manufacturers as there was nothing he could do at the dealership. 2nd call, the new representative also told me to call the dealer and when I asked for a supervisor to report my safety concerns, she hung up on me. The third call the rep said the exact same thing, however he sated a supervisor would call me
Car was purchased 1 hour prior to incident from a dealership. Car was in idle and was shifted to drive and automatically accelerated rapidly without foot on gas pedal and breaks did not work when breaks were forcefully applied during the incident. The car crashed into a house deck and went off the cement pad and crashed into trees in the yard. Unable to remove key from… Read more
Car was purchased 1 hour prior to incident from a dealership. Car was in idle and was shifted to drive and automatically accelerated rapidly without foot on gas pedal and breaks did not work when breaks were forcefully applied during the incident. The car crashed into a house deck and went off the cement pad and crashed into trees in the yard. Unable to remove key from ignition, had to be placed in neutral to remove key. We had the car for less than an hour after purchase. Damage was sustained to the deck and significant damage to car, air bags did not deploy. Claim was immediately filed with insurance.
Steering wheel shaking at about 50 MPH. Then warning lights on dash came on ABS- esp and bas. I slowed down drove home and parked it. Can’t get into shop until next week. Jeep has less than 48,000 miles.not safe to drive!
Brake line started to leak
Tl* the contact owns a 2008 Jeep Wrangler. While depressing the brake pedal, an abnormal sound was heard coming from the pedal and the vehicle failed to respond. As a result, the contact was involved in a low speed vehicle collision. A police report was not filed and no injuries were sustained. The vehicle was operable and did not sustain any damage. The vehicle was towed to… Read more
Tl* the contact owns a 2008 Jeep Wrangler. While depressing the brake pedal, an abnormal sound was heard coming from the pedal and the vehicle failed to respond. As a result, the contact was involved in a low speed vehicle collision. A police report was not filed and no injuries were sustained. The vehicle was operable and did not sustain any damage. The vehicle was towed to conway heaton new dodge Jeep ford chrysler ram (810 n 3rd st, bardstown, ky) where it was awaiting diagnostic testing. The manufacturer was not notified of the failure. The failure mileage was 141,000.
All 4 brake lines corroded. One blew and the other 3 had bulges. The vehicle was stationary. I had put my foot on the brake to put vehicle in gear. Brake pedal went to the floor and smoke came from the engine compartment. The lines were corroded directly behind where a previous recall k13 had been done to fix the fender liner issue about the liner rubbing a hole in the brake… Read more
All 4 brake lines corroded. One blew and the other 3 had bulges. The vehicle was stationary. I had put my foot on the brake to put vehicle in gear. Brake pedal went to the floor and smoke came from the engine compartment. The lines were corroded directly behind where a previous recall k13 had been done to fix the fender liner issue about the liner rubbing a hole in the brake line. All 4 lines corroded in the same spot. The fender liner held moisture and allowed the lines to corrode.
While driving my stock 08 jku rubicon when I went to stop brakes went to the floor and I rolled into an intersection. I am so lucky I did not die or kill someone else. I got it home to find that my tires had worn a hole in my brake lines on driver's side front. I contact dealership who basically tell me it isn't covered and that they had never heard of any issue's with tire… Read more
While driving my stock 08 jku rubicon when I went to stop brakes went to the floor and I rolled into an intersection. I am so lucky I did not die or kill someone else. I got it home to find that my tires had worn a hole in my brake lines on driver's side front. I contact dealership who basically tell me it isn't covered and that they had never heard of any issue's with tire rub on brake lines. I contacted fca they contacted the dealership who now basicly told me to bring in asap. Today I am contact by dealership that is covered but after it fails.
Tl* the contact owns a 2008 Jeep Wrangler. The contact stated that the brake pedal was slow to respond and the slippery road warning light flashed while driving during inclement weather. The contact stated that while driving approximately 20 MPH, the brake pedal was applied but failed to respond causing the contact to crash into the rear of another vehicle. The air bags did… Read more
Tl* the contact owns a 2008 Jeep Wrangler. The contact stated that the brake pedal was slow to respond and the slippery road warning light flashed while driving during inclement weather. The contact stated that while driving approximately 20 MPH, the brake pedal was applied but failed to respond causing the contact to crash into the rear of another vehicle. The air bags did not deploy and the contact did not sustain any injuries. A police report was filed. The vehicle was not included in NHTSA campaign numbers: 10v236000 (service brakes, hydraulic) and 08v202000 (service brakes, hydraulic). The vehicle was towed to an unknown location and was not diagnosed or repaired. . The manufacturer was notified of the failure. The approximate failure mileage was 95,000.
I was on an on-ramp entering a highway. When I tried to slow down to merge with traffic, my brakes did not work. The pedal went all the way to the floor and would not stop or even slow down the Jeep. I could not stop at all my Jeep and ran into the car in front of me. I inspected my Jeep and found that the right front brake line had come apart. The internal fitting was… Read more
I was on an on-ramp entering a highway. When I tried to slow down to merge with traffic, my brakes did not work. The pedal went all the way to the floor and would not stop or even slow down the Jeep. I could not stop at all my Jeep and ran into the car in front of me. I inspected my Jeep and found that the right front brake line had come apart. The internal fitting was rusted and the rubber coating appeared to be damaged/burned. This is factory brakes, no modifications have ever been made to any part of this Jeep. The dealership mechanic initally told me that the front drivers side was on the verge of coming apart also, then refused to speak to me afterwards. I have a bumper to bumper warranty which specifically lists all of these parts as covered. Chrysler then confiscated my vehicle, refused to make any repairs claiming they are "inspecting it for safety" for the next five business days. I do not consent to them taking my vehicle for this period of time. They refused to provide me with a rental car during this five business days of their so-called safety inspection. I have no idea what they are doing with my Jeep and why they won't return it to me. Customer service has been horrible and no one will give me any information about my Jeep or what's going on with it other than it's been "upgraded" to a different level of management. I believe they are attempting to cover up a factory/manufacturing caused defect due to the way they are handling this situation and the re
Parking brake lever spring broke, vehicle popped out of first gear while parked. It then rolled over a block down the street and crashed into another parked car. Luckily all the kids in the neighborhood had already boarded the school bus, as it rolled through the bus stop! *tr
My daughter was leaving a friends home who lives in the hills above malibu beach california. The street she was traveling down is tramonto drive. She got no further than 4 houses away, and being tramonto is a hill with some mild twists and turns, she went to brake. There were no brakes. She tried to press harder on the brake peddle and the car wouldn't stop. She hit a mailbox… Read more
My daughter was leaving a friends home who lives in the hills above malibu beach california. The street she was traveling down is tramonto drive. She got no further than 4 houses away, and being tramonto is a hill with some mild twists and turns, she went to brake. There were no brakes. She tried to press harder on the brake peddle and the car wouldn't stop. She hit a mailbox as well as a parked car as she had to apply the emergency brake to get her car to stop. There was a witness who was right behind her who could tell that something was happening with the car. Our daughter pulled the er brake, and skid hitting and taking out two mailboxes and the bumper of a car. The total distance she had driven....4 houses...the brake peddle wouldn't depress. *tr
2008 Jeep Wrangler. Consumer sent letters regarding the failure of the emergency brake holding on an incline.*tgw the consumer stated when he set the emergency brake, the vehicle started to roll backwards and hit the his gate. *jb