CarProblemsDB

2016 Honda Pilot steering problems

18 owners reported steering problems — 1% of all 1,732 complaints about the 2016 Honda Pilot.

Steering complaints by Honda Pilot year

202621
202547
202420
202319
20229
20215
20207
20199
20184
20178
201618
20153
20144
201312
201211
201134
20106
200913
20088
20073
20066
200537
200416
200332

What owners report

Sep 2, 2026steering, engine, fuel/propulsion system
A critical failure in the direct fuel injection system caused severe engine misfiring, sudden loss of drive power, and a cascade failure that disabled safety systems during vehicle operation. Diagnostic scan confirmed dtcs p0172 (fuel system rich) and p0301 (cylinder 1 misfire). In response to the misfire, the vehicle's computer automatically disabled the electronic power… Read more

A critical failure in the direct fuel injection system caused severe engine misfiring, sudden loss of drive power, and a cascade failure that disabled safety systems during vehicle operation. Diagnostic scan confirmed dtcs p0172 (fuel system rich) and p0301 (cylinder 1 misfire). In response to the misfire, the vehicle's computer automatically disabled the electronic power steering (eps), vehicle stability assist (vsa), and sh-awd systems (diagnostic codes u0401-68, u0416-68). This is a known manufacturing defect involving internal injector wear and high-pressure fuel pump debris (detailed in Honda tsb 20-100). The sudden loss of engine responsiveness paired with the simultaneous disengagement of traction and steering assists while driving creates an immediate crash hazard. Because Honda currently limits this repair to a 10-year warranty extension rather than a mandatory safety recall, vehicles with low mileage are experiencing sudden safety-assist shutdowns on the road without manufacturer remedy.

NHTSA complaint #11761766
Jun 29, 2026steering, vehicle speed control, engine
The 3.5l v6 engine in this vehicle suffered a sudden, catastrophic internal mechanical failure due to premature connecting rod bearing wear. The engine stalling occurred abruptly while actively driving, which created an immediate safety risk as the vehicle lost propulsion, power steering assistance, and power braking assistance. This forced a dangerous emergency maneuver to… Read more

The 3.5l v6 engine in this vehicle suffered a sudden, catastrophic internal mechanical failure due to premature connecting rod bearing wear. The engine stalling occurred abruptly while actively driving, which created an immediate safety risk as the vehicle lost propulsion, power steering assistance, and power braking assistance. This forced a dangerous emergency maneuver to navigate through moving traffic to get to the side of the road. Prior to the engine failure, there were no persistent dashboard warning lights or clear messages indicating an imminent mechanical failure. The first distinct symptom was a brief, sudden metallic knocking sound from the engine bay immediately before the vehicle lost all power and stalled. An authorized dealership has since inspected the vehicle and dropped the oil pan, physically confirming a massive accumulation of metal shavings and bearing debris inside the block. The dealership verified that the complete destruction of the engine block is identical in nature, symptom, and cause to the manufacturing defects described in NHTSA recall campaign 23v-751. However, this vehicle's specific VIN was excluded from that original recall parameter. This catastrophic failure directly corresponds to the ongoing office of defects investigation probe pe25008 regarding extensive v6 engine rod bearing failures. The failed engine block remains fully intact at the service center and is available for regulatory inspection upon request.

NHTSA complaint #11747229
Jan 30, 2026steering, vehicle speed control, engine
Engine failure while on highway traffic in construction zone caused engine shut off, losing power steering and odd braking. I was driving on a split 4 lane highway (2 lanes each direction), with a large ditch median between the directional lanes. My direction had construction cones for several miles limiting traffic to 1 lane, still at a 65 MPH speed limit with heavy… Read more

Engine failure while on highway traffic in construction zone caused engine shut off, losing power steering and odd braking. I was driving on a split 4 lane highway (2 lanes each direction), with a large ditch median between the directional lanes. My direction had construction cones for several miles limiting traffic to 1 lane, still at a 65 MPH speed limit with heavy semi traffic. The right lane was closed for construction, so all traffic was lined in left lane, though maintaining the speed limit. A few hundred yards into the construction my check engine light came on, and then after a minute or so it started blinking but there was no place to pull over safely. I reduced speed and semi traffic was lining up behind me. Then the engine and rest of car shut off, losing power steering. I ended up weaving into the construction part and was finally able to stop but not without danger to myself and others. Motor would restart but sounded terrible and I did not feel safe driving further and did not have faith it would make it far, especially since I'd have to re-enter the highway construction traffic. I had it towed to local mechanic, who diagnosed the problem as a piston rod bearing spin/stuck, or in other words a spun/slipped rod/crank bearing.

NHTSA complaint #11714460
← All 2016 Honda Pilot problems & recalls