CarProblemsDB

2008 Honda CR-V brakes problems

21 owners reported brakes problems — 2% of all 963 complaints about the 2008 Honda CR-V.

Brakes complaints by Honda CR-V year

202615
202531
202425
202329
202217
202128
202033
2019100
2018201
2017180
201619
201538
201422
201327
201223
201119
201025
200913
200821
200715
200624
200516
200414
200318
200225
20013
20002

What owners report

May 17, 2018service brakes

Required new rear brake pads after only 14,000 miles of usage

NHTSA complaint #11096458
Oct 11, 2017service brakes

Brakes became spongy. Honda dealer said the ABS modulator seems to be failing. $1500-2000 without labor and it may not fix the problem. We believe there should be a recall on this. It is a continuing issue. Our crv is parked at this time.

NHTSA complaint #11032949
Jul 1, 2017vehicle speed control, unknown or other, service brakesCrash
On june 23, 2017, at about 8:10 a.m., I turned in to a dry cleaners store at 5702 everhard road, corpus christi, texas. As I was slowly turning into a parking space and applying my brakes, my 2008 Honda dr-v accelerated on it's own, at a speed so fast I could not stop it, even though I was applying the brakes as hard as I could. The CR-V traveled about 20-25 feet and hit a… Read more

On june 23, 2017, at about 8:10 a.m., I turned in to a dry cleaners store at 5702 everhard road, corpus christi, texas. As I was slowly turning into a parking space and applying my brakes, my 2008 Honda dr-v accelerated on it's own, at a speed so fast I could not stop it, even though I was applying the brakes as hard as I could. The CR-V traveled about 20-25 feet and hit a pillar of the building head on. The CR-V hit the pillar with such force that it rebounded back approximately 5 feet from the point of impact. The front of the car was crushed in and the driver's air bag inflated. The sudden, unexplained acceleration of the CR-V on it's own caused the damage to the front end of the car. My foot was on the brakes the entire time and the CR-V would not stop.

NHTSA complaint #11002666
Apr 20, 2017air bags, service brakesCrash1 injured
Takata recall I was driving my car on 4/19/2017 when the car in front of mine stopped, I depresseed the brake pedal however it failed to stop, I struck the car in front of me which caused my airbag to inflate. It ruptured at that time releasing dirty smoke slike materials and burned the skin on my left wrist. I melted my coat and blouse sleeve singing my wrist.. At the time… Read more

Takata recall I was driving my car on 4/19/2017 when the car in front of mine stopped, I depresseed the brake pedal however it failed to stop, I struck the car in front of me which caused my airbag to inflate. It ruptured at that time releasing dirty smoke slike materials and burned the skin on my left wrist. I melted my coat and blouse sleeve singing my wrist.. At the time of the brake failure and ruptured airbag inflation I was in motion on a city street.

NHTSA complaint #10979665
Feb 20, 2012service brakes, hydraulicCrash
At about 5mph, I turned into the curb to park my car, upon applying my brakes to stop, the car accelerated, that is when I realized I was on a sheet of ice. I was unable to stop the car. There was a parked car approximately 60-80 feet ahead of me, because I had no brakes, I swerved to the left to avoid hitting the parked car, and collided with an oncoming car headed in the… Read more

At about 5mph, I turned into the curb to park my car, upon applying my brakes to stop, the car accelerated, that is when I realized I was on a sheet of ice. I was unable to stop the car. There was a parked car approximately 60-80 feet ahead of me, because I had no brakes, I swerved to the left to avoid hitting the parked car, and collided with an oncoming car headed in the same direction. My car then fishtailed and swiped the bumper of the parked car. There was no warning on the dashboard regarding the loss of the brakes, at anytime. *tr

NHTSA complaint #10448578
Apr 22, 2011service brakes, hydraulicCrash2 injured
On march 23, 2011, I was involved in an mva in northern ca. I was traveling west on hwy. 80 on a downgrade. Traffic had come to a stop due to an accident. It had been snowing and I was traveling at 25 MPH in second gear. My vehicle is a Honda 2008 crv with auto 4wd. I tapped my brake and there was no response. I tapped it again with no response. I applied steady… Read more

On march 23, 2011, I was involved in an mva in northern ca. I was traveling west on hwy. 80 on a downgrade. Traffic had come to a stop due to an accident. It had been snowing and I was traveling at 25 MPH in second gear. My vehicle is a Honda 2008 crv with auto 4wd. I tapped my brake and there was no response. I tapped it again with no response. I applied steady pressure to the brake pedal with no response. The brakes were not working. They were not slowing or stopping the vehicle. I had to drive into the concrete divider to stop my car. There was major damage to the vehicle but fortunately, my passenger and I were able to walk away with minor injuries. I have already notified Honda and they have agreed to conduct an inspection of the vehicle when it is released from the body shop. They said there were no brake issues in their data base for my model of vehicle. I asked them if my incident would be reported to your office. They said "no, they did not report individual incidents such as mine until there were several reported to them". The number of incidents was not given to me. I find this strange. So I decided I would report this directly to you. My vehicle is scheduled for completion next week. Is there anything I can do to maintain the integrity of my vehicle prior to Honda conducting their "inspection". I know this may sound as though I do not trust that Honda will conduct their investigation with integrity. Perhaps if toyota had been more forth comin

NHTSA complaint #10397178
Mar 1, 2010service brakes, hydraulic, traction control systemCrash
I was in an accident where the car slid off the road in a snow storm. When the car hit the ditch I pushed on the brakes and the car kept moving. The vehicle continued to move about 50 feet before striking a tree. It never slowed down, no matter how hard I pressed the brake pedal. The vehicle is equipped with all wheel drive (awd). It appeared to me that the awd took over… Read more

I was in an accident where the car slid off the road in a snow storm. When the car hit the ditch I pushed on the brakes and the car kept moving. The vehicle continued to move about 50 feet before striking a tree. It never slowed down, no matter how hard I pressed the brake pedal. The vehicle is equipped with all wheel drive (awd). It appeared to me that the awd took over and continued to try to get the vehicle under control from the slide on the ice. I was driving about 20 to 25 MPH at the time when I started to slide on ice. The passenger side wheels went into the ditch line, which was about 12 inches deep. I stepped on the brakes immediately after the wheels hit the ditch thinking it would slow the vehicle since the wheels were no longer on the icy road. As I said earlier, at that point I was pressing the brakes as hard as I could but the vehicle did not slow down. I suspect there is a conflict between the braking system and the awd when this situation occurs. It appears the awd software continues to gain stability, and prevents the brakes from stopping the wheels. I also read a notice from Honda that says when a situation like this occurs the anti-lock brakes are disabled and regular braking takes over. *tr

NHTSA complaint #10315245
← All 2008 Honda CR-V problems & recalls