CarProblemsDB

2021 GMC Yukon XL engine problems

169 owners reported engine & cooling problems — 71% of all 238 complaints about the 2021 GMC Yukon XL.

Engine & cooling complaints by GMC Yukon XL year

202627
202516
202463
2023166
2022129
2021169
202027
201941
201818
201726
201630
201528
20131
20122
20113
20103
20095
20084
200711
20062
20057
200411
20035
200212
20013
20003

What owners report

Nov 4, 2026engine, fuel/propulsion system
Incident 4: fuel injector internal short (cylinder #6) component / system failed: fuel injection system / cylinder #6 fuel injector & wiring harness failure description: cylinder 6 fuel injector failed due to an internal electrical short circuit, causing immediate engine misfires and severe power reduction. Repair required replacing the bank 2 fuel rail, four fuel injectors,… Read more

Incident 4: fuel injector internal short (cylinder #6) component / system failed: fuel injection system / cylinder #6 fuel injector & wiring harness failure description: cylinder 6 fuel injector failed due to an internal electrical short circuit, causing immediate engine misfires and severe power reduction. Repair required replacing the bank 2 fuel rail, four fuel injectors, and the injector wiring harness. Safety risk: immediate engine shuddering and abrupt drop in drive power while operating in active traffic creates a serious loss-of-acceleration hazard and heightened risk of a rear-end collision. Dealer / repair shop confirmation: official diagnosis confirmed by service center technician via electronic diagnostics verifying the internal electrical short circuit. Warning symptoms: check engine light illuminated simultaneously with engine shaking and sudden power loss; no prior symptoms existed before the failure. Inspection availability: confirmed via technician diagnostics; check engine light illuminated along with four other warning lights- car had to be towed to dealership to be fixed

NHTSA complaint #11775683
Nov 4, 2026engine, fuel/propulsion system
Incident 3: fuel pump driver module (fpdm) failure component / system failed: fuel pump driver module (fpdm - part #13554821) / engine control module (ECM) communication failure description: total loss of communication between the ECM and fpdm, causing the engine to abruptly die while idling at a traffic light. Subsequent attempt to restart using push-to-start produced a… Read more

Incident 3: fuel pump driver module (fpdm) failure component / system failed: fuel pump driver module (fpdm - part #13554821) / engine control module (ECM) communication failure description: total loss of communication between the ECM and fpdm, causing the engine to abruptly die while idling at a traffic light. Subsequent attempt to restart using push-to-start produced a severe mechanical screeching noise. Safety risk: unexpected stall in active traffic left the vehicle stranded and unable to restart safely, exposing occupants to collision hazards. Dealer / repair shop confirmation: confirmed by service technician. Diagnostic code p129f ("ECM lost communication with fuel pump driver module") logged; verified power and ground failures at the module. Replaced fpdm (part #13554821). Warning symptoms: none prior to failure. Sudden engine shutdown followed by screeching sound on attempted restart. Inspection availability: vehicle and replaced module are available for inspection upon request.

NHTSA complaint #11775676
Nov 4, 2026electrical system, engine, fuel/propulsion system
Incident 2: total electrical / power system shutdown component / system failed: electrical / power control system (auto-stop/start system) failure description: total loss of electrical power causing the main dashboard and display screen to go completely dark, stalling the vehicle during an autostop event at a traffic light and preventing the engine from restarting. Safety… Read more

Incident 2: total electrical / power system shutdown component / system failed: electrical / power control system (auto-stop/start system) failure description: total loss of electrical power causing the main dashboard and display screen to go completely dark, stalling the vehicle during an autostop event at a traffic light and preventing the engine from restarting. Safety risk: sudden total electrical shutdown leaves the vehicle completely dead, unresponsive, and immobilized in active traffic lanes/intersections, creating a high risk of rear-end or multi-vehicle collisions. Dealer / repair shop confirmation: customer complaint and active fault codes confirmed by dealership service department following standard maintenance schedule. Warning symptoms: display screen went blank; failure occurred instantly during autostop/traffic light stop without prior warning. Inspection availability: vehicle and affected systems are available for inspection upon request. Incident 3: fuel pump driver module (fpdm) failure component / system failed: fuel pump driver module (fpdm - part #13554821) / engine control module (ECM) communication failure description: total loss of communication between the ECM and fpdm, causing the engine to abruptly die while idling at a traffic light. Subsequent attempt to restart using push-to-start produced a severe mechanical screeching noise. Safety risk: unexpected stall in active traffic leaves the vehicle stranded and unable to restart safely, exposin

NHTSA complaint #11775670
Nov 4, 2026engine, fuel/propulsion system
Incident 1: internal engine failure & excessive oil consumption component / system failed: engine internal components (piston rings, valve guide seals, spark plugs) failure description: excessive oil consumption (1.5 to 2.0 quarts burned every 2,000 miles) leading to heavy oil-fouling on spark plugs #5 and #7. Required complete cylinder head, oil pan, and piston teardown to… Read more

Incident 1: internal engine failure & excessive oil consumption component / system failed: engine internal components (piston rings, valve guide seals, spark plugs) failure description: excessive oil consumption (1.5 to 2.0 quarts burned every 2,000 miles) leading to heavy oil-fouling on spark plugs #5 and #7. Required complete cylinder head, oil pan, and piston teardown to replace all pistons, rings, connecting rod bearings, lifters, guides, valve guide seals, and spark plugs. Safety risk: severe internal engine oil consumption and plug fouling create an immediate risk of engine misfires, unexpected loss of power, or catastrophic engine failure while driving at highway speeds. Dealer / repair shop confirmation: confirmed by dealership service department via oil consumption tests, spark plug inspection with oil dye, compression tests, cylinder leak-down tests, and physical teardown. Warning symptoms: low oil warning lamp illuminated; continuous need to top off oil between routine maintenance services. Inspection availability: vehicle and replaced components are available for inspection upon request.

NHTSA complaint #11775607
Nov 2, 2026engine
The contact owned a 2021 GMC Yukon XL. The contact stated that while driving 75 MPH, the vehicle suddenly shut off and lost power in the middle of traffic. The contact attempted to restart the vehicle, but the vehicle failed to restart. The contact stated that the emissions warning light and the drivetrain warning light were illuminated. The manufacturer was notified of the… Read more

The contact owned a 2021 GMC Yukon XL. The contact stated that while driving 75 MPH, the vehicle suddenly shut off and lost power in the middle of traffic. The contact attempted to restart the vehicle, but the vehicle failed to restart. The contact stated that the emissions warning light and the drivetrain warning light were illuminated. The manufacturer was notified of the failure and offered to pay half of the cost of the engine repair. The vehicle was towed to a dealer, where it was diagnosed with lifter and rod failures. The contact stated that the manufacturer was aware of the 6.2l engine failures. The failure mileage was 9,000.

NHTSA complaint #11775183
Nov 2, 2026engine
I own a 2021 GMC Yukon XL denali equipped with the 6.2l l87 v8 engine (VIN: [xxx]). At approximately 149,000 miles, the engine developed a significant internal mechanical failure requiring complete replacement. The vehicle was diagnosed by lexington park chevrolet buick GMC, an authorized GM dealership in [xxx]. The technician identified a misfire in cylinder #5, significant… Read more

I own a 2021 GMC Yukon XL denali equipped with the 6.2l l87 v8 engine (VIN: [xxx]). At approximately 149,000 miles, the engine developed a significant internal mechanical failure requiring complete replacement. The vehicle was diagnosed by lexington park chevrolet buick GMC, an authorized GM dealership in [xxx]. The technician identified a misfire in cylinder #5, significant oil contamination of the combustion chamber and spark plug, and broken oil-control rings on piston #5. The technician also documented bottom-end engine noise and determined that replacement of the engine assembly was necessary. The dealership replaced the engine with a GM remanufactured 6.2l l87 engine (part number 19420611), at an estimated cost of $10,950. Although my vehicle was not included in GM safety recall 25v-274 (n252494000), I am concerned that this significant internal engine failure may be relevant to NHTSA's ongoing investigation of l87 engine failures, particularly those occurring in vehicles outside the original recall population. I request that NHTSA review and document this failure as part of its ongoing evaluation of the l87 engine and the scope of the existing recall. Information redacted pursuant to the freedom of information act (foia), 5 u.s.c. 552(b)(6)

NHTSA complaint #11775180
Nov 1, 2026engine

Engine failure at approximately 72,000 miles. The vehicle had been inspected by GM dealer and passed the pico test at approximately 60,000 miles. GM suggested repair of 0w40 oil with new oil cap and driver's manual insert was completed.

NHTSA complaint #11775021
Oct 27, 2026electrical system, engine, fuel/propulsion system
**mileage at repair:** 76,165 miles **component:** fuel pump power control module while driving my 2021 GMC Yukon XL on [xxx] on a treacherous stretch decending [xxx] the engine unexpectedly stopped running, resulting in a complete loss of propulsion. This occurred on a section of interstate where there was no safe shoulder or suitable location to pull off the roadway. The… Read more

**mileage at repair:** 76,165 miles **component:** fuel pump power control module while driving my 2021 GMC Yukon XL on [xxx] on a treacherous stretch decending [xxx] the engine unexpectedly stopped running, resulting in a complete loss of propulsion. This occurred on a section of interstate where there was no safe shoulder or suitable location to pull off the roadway. The unexpected failure created an extremely dangerous situation, exposing me and other motorists to the risk of a serious collision. The vehicle was subsequently towed, diagnosed and repaired by darrell waltrip buick GMC in [xxx]. The dealership documented diagnostic trouble code p129f, "fuel pump driver control module fuel pump speed signal incorrect." the technician verified that the control module had proper electrical power, that there was no pin damage or connector fitment issue, and that the module required replacement. The dealership's written diagnosis specifically acknowledges that a failing fuel pump driver module can cause the engine to shut down. The original factory-installed module was replaced with GM part number 13554821, and the vehicle was subsequently tested and confirmed to operate correctly. The repair was performed at no charge, and GM provided a loaner vehicle while the replacement part was unavailable. I am particularly concerned that general motors has previously acknowledged this same type of safety hazard under NHTSA safety recall 21v-739 (GM n212332040), involving fuel pump power

NHTSA complaint #11774053
Oct 14, 2026engine
On september 21, 2026, my 2021 GMC Yukon XL denali with the 6.2l v8 engine experienced a serious engine failure at approximately 83,330 miles while traveling on interstate 10 near litchfield road in arizona. The vehicle developed engine knocking and subsequently stalled, leaving my family and me at risk on the highway. This was a serious safety concern because the engine… Read more

On september 21, 2026, my 2021 GMC Yukon XL denali with the 6.2l v8 engine experienced a serious engine failure at approximately 83,330 miles while traveling on interstate 10 near litchfield road in arizona. The vehicle developed engine knocking and subsequently stalled, leaving my family and me at risk on the highway. This was a serious safety concern because the engine failed unexpectedly during operation. The GMC dealership determined that the engine needed to be replaced under warranty. The replacement engine was installed in october 2026, and I received the vehicle back on october 13, 2026. My concern is that the dealership installed a remanufactured engine, and I have not received sufficient documentation confirming whether the replacement addresses the underlying defect associated with the GM 6.2l engine failures. I am concerned about the possibility of another catastrophic engine failure, particularly while traveling at highway speeds with my family. I am requesting that NHTSA investigate this engine failure and determine whether the replacement engine adequately addresses the safety defect. I believe these failures present a serious risk to drivers, passengers, and other motorists.

NHTSA complaint #11771244
Oct 14, 2026engine

High oil consumption, will have oil changed and days later need oil, catalyst converter failed causing what was said for the check engine light to come on, truck now has a shutter around 50 MPH, my radio is in and out, and sometimes it sounds like a computer shutting down. It has been one thing after the next.

NHTSA complaint #11771151
Sep 29, 2026engine

The vehicle is consuming every bit of oil at about 1500 to 1800 miles of the 3000 mile guidelines before the next oil change. No leaks. No smoke. No knocking in motor.

NHTSA complaint #11767641
Sep 19, 2026engine

Engine coolant control valve has failed three times. This last time so severely the car forced me to come to a complete stop in the middle of a busy street. Dangerous to drive while severe reduced acceleration is all that’s available during the episodes.

NHTSA complaint #11765500
Sep 18, 2026engine
Vehicle has been consuming engine oil at a rate of approximately 1 quart per 500 miles. On xxx, owner added 1 quart of oil in [xxx], then drove a round trip to [xxx] and back (approx. 860 miles). On xxx at 55,329 miles — only 9 days and roughly 860 miles after that quart was added — an oil change was performed at an independent shop; the technician noted no oil was present on… Read more

Vehicle has been consuming engine oil at a rate of approximately 1 quart per 500 miles. On xxx, owner added 1 quart of oil in [xxx], then drove a round trip to [xxx] and back (approx. 860 miles). On xxx at 55,329 miles — only 9 days and roughly 860 miles after that quart was added — an oil change was performed at an independent shop; the technician noted no oil was present on the dipstick prior to service. On xxx at 55,829 miles — exactly 500 miles later — the vehicle was taken to an authorized GMC dealership, and the dipstick again showed no oil prior to service. The dealer began the manufacturer's oil consumption test protocol, performing an oil and filter change and other maintenance. Within approximately 74 miles of this service (current mileage 55,903), the engine began making an audible knocking noise. Oil level was checked and confirmed full/normal, ruling out low oil as the cause. The knock has been intermittent — not present at cold idle start, but returning during driving conditions, raising concern about potential engine failure or loss of power while driving. They can not get it back in till xxx. Information redacted pursuant to the freedom of information act (foia), 5 u.s.c. 552(b)(6)

NHTSA complaint #11765236
Sep 15, 2026engine
The rod bearing failed while traveling at highway speeds, so yes our safety as well as others traveling on the interstate. It is available for inspection. A dealership inspected and confirmed the reported problem. The manufacturer is aware of the persistent problems with these vehicles' engine components, reliability and safety. There were not any symptoms, warning lights,… Read more

The rod bearing failed while traveling at highway speeds, so yes our safety as well as others traveling on the interstate. It is available for inspection. A dealership inspected and confirmed the reported problem. The manufacturer is aware of the persistent problems with these vehicles' engine components, reliability and safety. There were not any symptoms, warning lights, etc. Prior to failure. I had just purchased the vehicle and it was inspected by two independent mechanics prior to failure. I have contacted the manufacture to find that my VIN was not covered under the recall. The recall covers vehicles manufactured starting 3/1/2021, my vehicle was manufactured 10/2020. The recall should be expanded to cover all of these vehicles.

NHTSA complaint #11764288
Sep 14, 2026engine, fuel/propulsion system

According to the GM dealership the rod bearing failed disabling the engine. Dealer recommends replacing the entire engine. This consistent with recall n 252494000-n252494003 but my VIN is not included in the recall. Estimated repair $11,200. Our family was traveling roughly 55 MPH on the interstate at the time of incident.

NHTSA complaint #11764136
Sep 12, 2026engine

The engine failed, shop confirmed and replaced motor. No warning lamps on dash.

NHTSA complaint #11763845
Sep 10, 2026engine
I own a 2021 GMC Yukon XL denali equipped with the 6.2l l87 v8 engine. On september 10, 2026, we checked the engine oil and discovered that it was approximately two-thirds low. Mechanical inspection confirmed that the engine is consuming and burning oil internally rather than losing it through an external leak. The vehicle’s last oil change was performed in may 2026, and it… Read more

I own a 2021 GMC Yukon XL denali equipped with the 6.2l l87 v8 engine. On september 10, 2026, we checked the engine oil and discovered that it was approximately two-thirds low. Mechanical inspection confirmed that the engine is consuming and burning oil internally rather than losing it through an external leak. The vehicle’s last oil change was performed in may 2026, and it is still more than 1,000 miles away from its next scheduled oil change. The vehicle provided no low-oil, low-oil-pressure, check-engine, or other dashboard warning, despite being severely low on oil and having its alerts enabled. I had no indication that the engine was operating with an unsafe amount of oil. I am concerned that the continued internal oil consumption could cause premature engine damage, engine seizure, or sudden loss of propulsion without adequate warning. I regularly use this vehicle to transport my young children. My VIN is not currently included in recall 25v-274, although my vehicle has the same model year and 6.2l l87 engine involved in the ongoing NHTSA investigation. I am reporting this confirmed internal oil consumption and lack of driver warning so that problems occurring in currently excluded vehicles can be properly documented and investigated.

NHTSA complaint #11763520
Sep 10, 2026engine
My 2021 GMC Yukon XL denali with the 6.2l l87 v8 has experienced two significant lifter/valvetrain failures. The first occurred at approximately 6,500 miles and was repaired by a GMC dealer. That failure involved cylinder #4, including a collapsed/stuck lifter and bent pushrod. The current failure occurred at approximately 110,269 miles. The vehicle initially operated… Read more

My 2021 GMC Yukon XL denali with the 6.2l l87 v8 has experienced two significant lifter/valvetrain failures. The first occurred at approximately 6,500 miles and was repaired by a GMC dealer. That failure involved cylinder #4, including a collapsed/stuck lifter and bent pushrod. The current failure occurred at approximately 110,269 miles. The vehicle initially operated normally. While traveling about 10 MPH and approaching a major thoroughfare, the engine suddenly began making a loud knocking noise and the vehicle began shaking violently. There were no warning lights or other symptoms beforehand. Three children were in the vehicle. When the driver attempted to accelerate, the vehicle failed to gain speed normally, and additional accelerator input made the knocking and shaking significantly worse. The check-engine light began flashing, and “service ESC” and “service traction control” warnings appeared, along with multiple other warning lights. The engine continued running. The driver made a u-turn before entering the major roadway and drove about 0.2 miles very slowly back home. An independent repair facility diagnosed p0305, cylinder #5 misfire. Moving the ignition coil and spark plug did not move the misfire, and the #5 spark plug was oil-soaked. A GMC dealer later confirmed a stuck lifter on cylinder #5 and advised that the failed lifter damaged the camshaft. My concern is the sudden loss of normal acceleration and severe engine malfunction without warning, especially

NHTSA complaint #11763260
Sep 7, 2026engine

We had to have an engine replaced because of engine failure. The new engine was provided by GMC free of charge. The second engine also failed and was also replaced by GMC.

NHTSA complaint #11762580
Sep 7, 2026engine
I purchased this vehicle 06/14/2026 the vehicle dash started lighting up like a christmas tree. It was taken to GM ed morse freedom chevrolet x 3 separate occasions. The lights in the dash were intermittent. Dealership couldn't duplicate the issue. I was told if they aren't active they can't duplicate. The vehicle continued to illuminate on and off after it was returned… Read more

I purchased this vehicle 06/14/2026 the vehicle dash started lighting up like a christmas tree. It was taken to GM ed morse freedom chevrolet x 3 separate occasions. The lights in the dash were intermittent. Dealership couldn't duplicate the issue. I was told if they aren't active they can't duplicate. The vehicle continued to illuminate on and off after it was returned july 26th. Then august 23 I was driving and it died right in the highway putting me in a bad spot in traffic. I. There was no illuminated symbols in the dash it just died as the symbols them lit up in the dash. I had it towed by aaa thinking just a battery or starter. I was told by GM dealership the engine seized. Propulsion, metal in the oil and the crankshaft failure. The exact recall problem. My VIN fell just outside of GM internal n252494003 program of 150,000 10 year extended warranty. I have 114, 689. 2021 yukon denali. The exact engine failure GM put out. GM is refusing to replace the engine. The engine has been torn down. I received pictures of my claim above. It's still at GM . I've opened a corporate GM case. I'm hitting a brick wall

NHTSA complaint #11762576
Sep 1, 2026power train, engine
Vehicle is equipped with the 6.2l l87 v8 engine. Prior to receiving the dealer service for recall 25v-274, the vehicle experienced a distinct highway vibration, powertrain shudder, and fluctuating/jumping rpms on the highway. The dealer subsequently performed the recall remedy by updating the vehicle to the thicker 0w-40 oil specification. However, the underlying transmission… Read more

Vehicle is equipped with the 6.2l l87 v8 engine. Prior to receiving the dealer service for recall 25v-274, the vehicle experienced a distinct highway vibration, powertrain shudder, and fluctuating/jumping rpms on the highway. The dealer subsequently performed the recall remedy by updating the vehicle to the thicker 0w-40 oil specification. However, the underlying transmission torque converter had already suffered catastrophic failure due to the powertrain stress/shudder and required a complete transmission replacement at 84,000 miles. I am reporting this because the initial 6.2l engine defect and subsequent recall remedy overlap heavily with severe powertrain and torque converter failures at low mileage

NHTSA complaint #11761330
Sep 1, 2026engine

Our 2021 yukonxl started running rough and the check engine light came on. We took it to the shop the next day and was told there was complete lifter failure and that we need a new engine.

NHTSA complaint #11761201
Aug 31, 2026engine
The engine started knocking and vehicle shaking while on interstate. Vehicle was towed to service center and they determined that one valve was stuck and another one turned 90 degrees and the cam shaft was also ruined. It was required to replace the engine as that was a less costly option than replacing the damaged parts. A dash light came on and was flashing while my… Read more

The engine started knocking and vehicle shaking while on interstate. Vehicle was towed to service center and they determined that one valve was stuck and another one turned 90 degrees and the cam shaft was also ruined. It was required to replace the engine as that was a less costly option than replacing the damaged parts. A dash light came on and was flashing while my daughter was driving it to [xxx]. The vehicle was towed from the parking lot they were at when reaching [xxx]. Unsure of where the engine went to after the service center removed it, but I think they had to send it back to GM. Information redacted pursuant to the freedom of information act (foia), 5 u.s.c. 552(b)(6)

NHTSA complaint #11761076
Aug 28, 2026engine

I have a 6.2l that we took in with bad rods due to the cam. The fixed the motor and now it is consuming oil and GM says it is normal. Normal for an engine to consume quarts of oil?? I cannot trade out of the vehicle because of the extreme depreciation that these vehicles have incurred due to the known engine issues. I know others are having the same issues I just want GM to make this right and help loyal customers.

NHTSA complaint #11760388
Aug 25, 2026engine
Lifter/camshaft/engine failure. GM knows this is an issue with these models/years. They only want to cover half of the repair sticking me with a bill for $5600. Safety is a concern because they know this is an issue and not issuing a recall currently. I was driving when this happened which could have caused me to get into an accident. Very dangerous. Car is currently as… Read more

Lifter/camshaft/engine failure. GM knows this is an issue with these models/years. They only want to cover half of the repair sticking me with a bill for $5600. Safety is a concern because they know this is an issue and not issuing a recall currently. I was driving when this happened which could have caused me to get into an accident. Very dangerous. Car is currently as GMC started by showing low oil in between oil changes last year. Went in for an oil change and told them about it. Dealership told me it was the air hose box and that they didn't see any other issue. I believe they are told to lie to get each customer further out of warranty. I was driving and all of a sudden the car started violently shaking and lights started flashing at me.

NHTSA complaint #11759486
Aug 25, 2026engine
Driving on the freeway the engine started making super loud knocking noises for while going 70mph . Then it immediately died everything turned off no power I was barely able to get it off the freeway while coasting. And my husband tried to push it off the road more but when it dies we are not able to put the car in neutral !! It’s a push button gear shift ! When there’s no… Read more

Driving on the freeway the engine started making super loud knocking noises for while going 70mph . Then it immediately died everything turned off no power I was barely able to get it off the freeway while coasting. And my husband tried to push it off the road more but when it dies we are not able to put the car in neutral !! It’s a push button gear shift ! When there’s no power the buttons don’t work!! It was 105 degrees out that day in sacramento , the car had zero power the battery is not the problem . The motor is blown and the car hasn’t started since that day. These cars are dangerous to just die in the middle of the freeway! The motor has already been replaced in feb 2026, we bought it in march of 2026 with 57k miles on it. I added about 12k miles and the motor blew up again!

NHTSA complaint #11759446
Aug 25, 2026engine
My 2021 GMC yukon denali features the 6.2l l87 v8 engine. This vehicle was previously serviced for the GM voluntary recall regarding engine bearing failures, and the dealership completed the remedy by inspecting the motor and changing the oil to the thicker 0w-40 specification. Since completing this recall fix, the vehicle has developed an intermittent rough idle and… Read more

My 2021 GMC yukon denali features the 6.2l l87 v8 engine. This vehicle was previously serviced for the GM voluntary recall regarding engine bearing failures, and the dealership completed the remedy by inspecting the motor and changing the oil to the thicker 0w-40 specification. Since completing this recall fix, the vehicle has developed an intermittent rough idle and sputtering behavior. The dealership has been unable to duplicate the intermittent issue and claims it falls under normal behavior. I am filing this report because my vehicle is exhibiting post-recall remedy engine degradation, matching the exact failure patterns outlined in the NHTSA engineering analysis ea26005 escalated on august 20, 2026. This intermittent sputter represents a severe safety hazard regarding potential sudden loss of motive power while driving.

NHTSA complaint #11759419
Aug 23, 2026engine

Engine failed. Had to be towed to the dealer to get a new motor. It was part of the 6.2l l87 recall

NHTSA complaint #11758958
Aug 23, 2026vehicle speed control, engine, fuel/propulsion system
Was driving the vehicle at 70 MPH on the highway without any issues for several hours and suddenly the vehicle lost power and had no propulsion. It went into neutral automatically and the engine shut off while driving. Thankfully I was on a downward slope and could steer the vehicle off the very busy highway. Once safe, I tried to restart the car but the engine would not start… Read more

Was driving the vehicle at 70 MPH on the highway without any issues for several hours and suddenly the vehicle lost power and had no propulsion. It went into neutral automatically and the engine shut off while driving. Thankfully I was on a downward slope and could steer the vehicle off the very busy highway. Once safe, I tried to restart the car but the engine would not start or turn over. Roadside assistance came to help as well as a flatbed tow truck. It was taken to a nearby GMC dealer but it remains completely dead despite the battery being fully charged and all of the electronics working. No known error codes are showing up. It’s an l87 engine and was part of the GM recall. The recall work was completed in nov 2025.

NHTSA complaint #11758876
Aug 21, 2026power train, electrical system, engine
Driving on busy road when heard a squealing from the engine bay of the vehicle. Moments later the vehicle lost power. It was a very dangerous situation traveling approximately 45mph on a multi-lane road in urban st. Louis missouri. There was not a check engine light prior. The vehicle had a recall performed per GMC instructions prior (this amounted to a different viscosity… Read more

Driving on busy road when heard a squealing from the engine bay of the vehicle. Moments later the vehicle lost power. It was a very dangerous situation traveling approximately 45mph on a multi-lane road in urban st. Louis missouri. There was not a check engine light prior. The vehicle had a recall performed per GMC instructions prior (this amounted to a different viscosity oil....). The breakdown stranded my family and I while on vacation in another city. The vehicle was towed to a local GMC dealership and was diagnosed as a seized engine related to the recall. The engine is scheduled to be replaced as no cost through GMC's extended service. They have not provided coverage for the towing, for the multiple ride shares needed to get around on vacation, for the rental car needed to get home, or a rental car to help us with day-to-day life during the estimated 6-8 weeks we will be waiting. My family was at risk, other motorists on the parkway were at risk. It was pure luck and quick thinking that saved injury or loss of life. It is completely unbelievable GMC is letting these vehicles be on the road for peoples safety and for the money people pay as a consumer.

NHTSA complaint #11758496
Aug 17, 2026unknown or other, engine, fuel/propulsion system
I am filing a safety complaint regarding my 2021 GMC yukon. While driving on the highway during a long-distance trip from [xxx] to [xxx], my vehicle suddenly experienced a serious loss of power, drivability issues, and loss of propulsion. The vehicle began shaking violently, slowing down unexpectedly, and struggling to maintain speed while in active highway traffic at highway… Read more

I am filing a safety complaint regarding my 2021 GMC yukon. While driving on the highway during a long-distance trip from [xxx] to [xxx], my vehicle suddenly experienced a serious loss of power, drivability issues, and loss of propulsion. The vehicle began shaking violently, slowing down unexpectedly, and struggling to maintain speed while in active highway traffic at highway speeds. At the time of the incident, the vehicle displayed a warning message indicating “conditions not correct for shift” at approximately 127,506 miles. Shortly after, the vehicle set diagnostic trouble code p0011, which relates to the engine and transmission system not performing as expected and indicates an issue with the variable valve timing (vvt) system affecting engine timing and performance. The vehicle also entered a reduced performance state, and I was advised through the vehicle’s warning system to reduce speed, avoid hard acceleration, and avoid heavy load conditions. Despite following these precautions, the vehicle continued to run poorly and became increasingly unsafe to operate in highway traffic. This created a serious and potentially life-threatening situation, as I was traveling in fast-moving traffic and the vehicle lost normal propulsion and stability. I had to carefully maneuver out of active traffic lanes to avoid a potential collision. The vehicle eventually required roadside assistance/towing due to its inability to operate normally. Diagnostic trouble codes and warning mess

NHTSA complaint #11757435
Jul 22, 2026engine

Burning oil too much too fast oil all over motor and engine and white smoke inside the car all records are with GMC dealer

NHTSA complaint #11752184
Jul 20, 2026engine
Engine seized while driving on the highway. This is the same engine that is being recalled and GM has said that the VIN is not covered. The vehicle stopped running on a major highway with my [xxx] old son in the car. The dealership is saying this is the exact issue that is part of the larger investigation for GM v8 engines. There were no warning lights at all prior to the… Read more

Engine seized while driving on the highway. This is the same engine that is being recalled and GM has said that the VIN is not covered. The vehicle stopped running on a major highway with my [xxx] old son in the car. The dealership is saying this is the exact issue that is part of the larger investigation for GM v8 engines. There were no warning lights at all prior to the engine seizing. Information redacted pursuant to the freedom of information act (foia), 5 u.s.c. 552(b)(6)

NHTSA complaint #11751598
Jul 13, 2026engine and engine cooling
The contact owns a 2021 GMC Yukon XL. The contact stated that while driving 55 MPH, several unknown warning lights illuminated, and the check engine warning light started blinking. The contact pulled over and became aware that the vehicle was shaking. The vehicle was turned off and restarted; however, the failure persisted, with smoke coming from the vehicle. The vehicle was… Read more

The contact owns a 2021 GMC Yukon XL. The contact stated that while driving 55 MPH, several unknown warning lights illuminated, and the check engine warning light started blinking. The contact pulled over and became aware that the vehicle was shaking. The vehicle was turned off and restarted; however, the failure persisted, with smoke coming from the vehicle. The vehicle was repaired under NHTSA campaign number: 25v274000 (engine and engine cooling); but the repair failed to fix the vehicle. The vehicle was taken to the dealer, where it was diagnosed, and it was determined that the camshaft needed to be replaced and that cylinder #8 was damaged and had detached. The manufacturer was notified of the failure. The failure mileage was 116,204.

NHTSA complaint #11749993
Jul 7, 2026engine

This is from dealership “found customers concern of engine light is on and ticking noise found cylinder 4 lifters to be collapsed causing the exhaust gasses to be trapped in the cylinder causing the cylinder wall to dry out and leaving scratches on the cylinder wall recommend replacing motor due to this problem at this time”

NHTSA complaint #11748742
Jul 3, 2026power train, engine

My family and were traveling to visit family, and the transmission stalled on me on the interstate. I almost had a horrible accident with my kids in the vehicle. The vehicle is in the shop currently and dx with transmission issues. GMC needs to recall and or fix the transmissions in all of their vehicle.

NHTSA complaint #11748113
Jul 1, 2026power train, engine
Issue description: the vehicle experienced a failure of the dynamic fuel management (dfm) system, resulting in a collapsed lifter. This caused a cylinder misfire and a sudden loss of engine power while driving at highway speeds. Safety concern: while traveling at highway speeds, the sudden misfire and loss of power created a dangerous condition. The vehicle could not… Read more

Issue description: the vehicle experienced a failure of the dynamic fuel management (dfm) system, resulting in a collapsed lifter. This caused a cylinder misfire and a sudden loss of engine power while driving at highway speeds. Safety concern: while traveling at highway speeds, the sudden misfire and loss of power created a dangerous condition. The vehicle could not maintain speed or accelerate properly with surrounding traffic, significantly increasing the risk of a collision. Failure details: the issue was diagnosed as a collapsed lifter related to the dfm system. This caused persistent misfiring, rough engine operation, and severe drivability issues. Repair outcome: due to the extent of internal engine damage caused by the lifter failure, the vehicle required complete engine replacement.

NHTSA complaint #11747701
Jun 12, 2026vehicle speed control, engine, fuel/propulsion system

Check engine light comes on and an alert says "acceleration reduced" dealer says the coolant control valve is bad but the engine never overheats but the fans are running max speed 100% of the time.

NHTSA complaint #11743664
Jun 6, 2026power train, seat belts, engine
While I was driving home from the grocery store with my 4 kids our 2021 GMC Yukon XL (5.3l v8 engine), the vehicle suffered a sudden, catastrophic mechanical engine failure without warning. The engine began violently shaking, lost major propulsion, and dropped into a severe misfire state when we were coming down the highway. This created an immediate safety hazard on the road,… Read more

While I was driving home from the grocery store with my 4 kids our 2021 GMC Yukon XL (5.3l v8 engine), the vehicle suffered a sudden, catastrophic mechanical engine failure without warning. The engine began violently shaking, lost major propulsion, and dropped into a severe misfire state when we were coming down the highway. This created an immediate safety hazard on the road, as I suddenly lost the ability to safely accelerate or maintain highway speeds while hauling my children.a certified technician diagnosed the issue as a complete failure of the active fuel management hydraulic valve lifters and bent pushrods, a known manufacturing defect explicitly documented in GM technical service bulletin pip5776f. The internal failure required a total engine teardown and valvetrain replacement, costing over $10,000 out of pocket.general motors has failed to issue a safety recall for this specific 5.3l valvetrain defect, despite it causing unexpected engine stalls, severe power loss, and immediate traffic hazards for drivers. This defective component poses an ongoing safety risk to families and should be upgraded to a mandatory safety recall. I am afraid to drive it every time I get on the highway in fear it could shut down again.

NHTSA complaint #11742514
May 29, 2026engine and engine cooling

The contact owns a 2021 GMC yukon. The vehicle was taken to the local dealer for a routine oil change. While driving, the oil low light illuminated. The vehicle was burning an excessive amount of oil. The local dealer was contacted again, but the vehicle was not diagnosed or repaired. The manufacturer was contacted, who referred to the local dealer. The failure mileage was approximately 149,000.

NHTSA complaint #11740801
← All 2021 GMC Yukon XL problems & recalls