CarProblemsDB

2002 GMC Yukon XL brakes problems

38 owners reported brakes problems — 40% of all 95 complaints about the 2002 GMC Yukon XL.

Brakes complaints by GMC Yukon XL year

20253
20242
202310
20224
20216
20203
20195
201811
201725
201641
201564
20142
20131
20121
20081
20072
20065
20058
200414
200322
200238
200173
200032

What owners report

Jun 23, 2022service brakes
The contact owns a 2002 GMC Yukon XL. The contact stated while driving approximately 70 MPH, the contact started to slow for traffic and depressed the brake, and felt no braking. The contact had to depress the brake pedal to the floorboard. The contact stated that the brake warning light was illuminated. The contact was able to safely stop and drove the vehicle to his… Read more

The contact owns a 2002 GMC Yukon XL. The contact stated while driving approximately 70 MPH, the contact started to slow for traffic and depressed the brake, and felt no braking. The contact had to depress the brake pedal to the floorboard. The contact stated that the brake warning light was illuminated. The contact was able to safely stop and drove the vehicle to his residence. The contact had taken the vehicle to a local dealer who diagnosed that there was a fractured parking brake spring. The vehicle was not repaired. The manufacturer had not been informed of the failure. The failure mileage was approximately 189,000.

NHTSA complaint #11470657
Mar 31, 2020service brakes

As vehicle comes to a slow stop the brakes feel as if the release and still roll also when pulling into a driveway or parking spot this has happed often.

NHTSA complaint #11319808
Aug 9, 2017service brakes, air
Tl* the contact owns a 2002 GMC Yukon XL. The contact stated that while the brake pedal was depressed, the vehicle jumped and hesitated without warning. The vehicle was taken to an independent mechanic where it was diagnosed that the wheel speed sensor was corroded and needed to be replaced. The dealer was not contacted. The vehicle was not repaired. The manufacturer was… Read more

Tl* the contact owns a 2002 GMC Yukon XL. The contact stated that while the brake pedal was depressed, the vehicle jumped and hesitated without warning. The vehicle was taken to an independent mechanic where it was diagnosed that the wheel speed sensor was corroded and needed to be replaced. The dealer was not contacted. The vehicle was not repaired. The manufacturer was notified of the failure and the contact was provided case number 8-3140697651. The approximate failure mileage was 145,000.

NHTSA complaint #11013947
Mar 14, 2016service brakesCrash
Two years ago I had a sever accident that cause me to hit another car and spin around. The GMC dealer said the cause was rusted out brake lines. Today it happened, but I was luck enough to be just pulling into my parking spot when it happened. The brake line must have rusted out again because I pumped the brake and noticed it coming out of the left rear line. This is very… Read more

Two years ago I had a sever accident that cause me to hit another car and spin around. The GMC dealer said the cause was rusted out brake lines. Today it happened, but I was luck enough to be just pulling into my parking spot when it happened. The brake line must have rusted out again because I pumped the brake and noticed it coming out of the left rear line. This is very dangerous because it will likely only happen when you are in an emergency situation. There is no pre warning. It will just happen. Perhaps they are making the brake lines out of thinner material because we have many vehicles much older, and never had this problem.

NHTSA complaint #10849598
Feb 16, 2016service brakes
I drove approx. 30 miles to my destination without any trouble. I spent about 2 hours there then started my 2002 Yukon XL to head back home. Upon moving the vehicle I realized I had very limited breaking power. The brake pedal went right to the floor. I dread thinking about what could have happened if I was on the interstate heading home. My mechanic said the brake line… Read more

I drove approx. 30 miles to my destination without any trouble. I spent about 2 hours there then started my 2002 Yukon XL to head back home. Upon moving the vehicle I realized I had very limited breaking power. The brake pedal went right to the floor. I dread thinking about what could have happened if I was on the interstate heading home. My mechanic said the brake line failed causing the rear brakes to lose all stopping power. He said he has seen several cases of this same problem on early 2000's GMC trucks and suv's. I researched this issue and found many of the same complaints online. GMC should stand behind this and pay to repair this obviously defective part replacement. This will be an $800 repair for me and a big disappointment in GMC if they don't stand behind their vehicles.

NHTSA complaint #10836552
Jan 8, 2015service brakes

During low speed the ABS kicks in on no slip conditions causing it to take longer to stop the vehicle. This started occurring in june 2014. I see a recall on 2002 Yukon XL vehicles for this problem but it does not show up on the VIN report. *tr

NHTSA complaint #10671122
Nov 2, 2014service brakes
While turning into a mall parking lot from a main street, applied brakes to slow down into the parking lot for a vehicle to pass in front of me. Without any prior warning the break peddle went to the floor and I was unable to stop even from a slow speed. Luckly I was able to drive around the vehicle in front of me because the breaks seemed to fail about 95%. I pumped the… Read more

While turning into a mall parking lot from a main street, applied brakes to slow down into the parking lot for a vehicle to pass in front of me. Without any prior warning the break peddle went to the floor and I was unable to stop even from a slow speed. Luckly I was able to drive around the vehicle in front of me because the breaks seemed to fail about 95%. I pumped the breaks a few time and got into the closest parking space. The vehicle was not safe to drive do to sudden break failure. The repair garage certified mechanic said the break line had rusted thru and the break fluid was rapidly leaking. I had the garage replace all the entire rusted break lines ($646.00) to be able to drive safely and avoid another sudden break failure due to rusted break lines. Otherwise the car has been well taken care for and in excellent running condition. My mechanic said they had repaired several GMC vehicles with this identical problem. I believe GMC has sold a car with defective safety parts which have worn prematurely. *tr

NHTSA complaint #10651966
Mar 11, 2014suspension, structure, service brakes
We purchased the 2002 yukon from mcguire dealership in nj its been cared for taken to the dealership faithfully driven by my 50 year old father, when first driving he noticed the pedal vibrating rapidly during normal brake applications. The ABS control valve was the culprit along with a rusty wheel sensor. It was replaced at the dealer and after 5 years the frame of the truck… Read more

We purchased the 2002 yukon from mcguire dealership in nj its been cared for taken to the dealership faithfully driven by my 50 year old father, when first driving he noticed the pedal vibrating rapidly during normal brake applications. The ABS control valve was the culprit along with a rusty wheel sensor. It was replaced at the dealer and after 5 years the frame of the truck is rusting and rotting along with suspension parts and most of all the brakes. We came close to crashing one day when the pedal went straight to the floor, we take it to the local firestone and they tell us all the brake lines are rusted out along with the master cylinder. We replaced the lines and master cylinder with a hefty price tag. We get the car back 3 days later pedal goes to the floor again, back at the mechanic both rear calipers are rusted and leaking. We replaced all 4 calipers and the problem stopped but now the frame is rusting and the ABS is still vibrating badly. Long story short GM needs to be held accountable for selling such cheap crappy trucks, we came close a few times to crashing, and I feel sorry for the people that have lost their lives due to the negligence of the employees of GM. *tr

NHTSA complaint #10568634
Jul 31, 2013service brakes

Stepped on brake pedal and brakes failed to stop vehicle. Inspected vehicle and noticed rusted brake lines failed.I am the original owner of this vehicle. *tr

NHTSA complaint #10532852
Oct 16, 2012service brakes

The antilock brake sensors are malfunctioning and causing extended stopping distances that could lead to an accident. The original recall was completed in 2006, according to GMC they only cleaned the parts and did not replace them. As a result there is severe corrosion on the antilock brake sensor causing increased stopping distances that could cause an accident. *tr

NHTSA complaint #10480664
Apr 25, 2011service brakes, hydraulic
Tl* the contact owns a 2002 GMC Yukon XL. The contact stated that while approaching an intersection, the ABS warning light illuminated and the vehicle vibrated as the brake pedal was depressed. The vehicle did not stop when the brakes were applied and was in the intersection before it finally stopped. The braking issues persisted as the vehicle was continuously driven. The… Read more

Tl* the contact owns a 2002 GMC Yukon XL. The contact stated that while approaching an intersection, the ABS warning light illuminated and the vehicle vibrated as the brake pedal was depressed. The vehicle did not stop when the brakes were applied and was in the intersection before it finally stopped. The braking issues persisted as the vehicle was continuously driven. The vehicle was taken to an authorized dealer who stated that the electronic brake control module had failed and would need to be replaced. The vehicle was not repaired. The contact called the manufacturer who offered no assistance. The current and failure mileage was 156,000.

NHTSA complaint #10397339
Jan 27, 2009service brakes, hydraulic
Tl*the contact owns a 2002 GMC Yukon XL. The contact referenced NHTSA campaign id number 05v379000 (service brakes, hydraulic:antilock) because her vehicle is experiencing the same issues. The ABS indicator illuminates and makes a loud noise when driving and when the vehicle is stopped. The ABS activation also makes stopping the vehicle very difficult. The dealer advised… Read more

Tl*the contact owns a 2002 GMC Yukon XL. The contact referenced NHTSA campaign id number 05v379000 (service brakes, hydraulic:antilock) because her vehicle is experiencing the same issues. The ABS indicator illuminates and makes a loud noise when driving and when the vehicle is stopped. The ABS activation also makes stopping the vehicle very difficult. The dealer advised the contact to defuse the fuse where the ABS indicator is located in order to stop the noise while the engine is running. The vehicle was taken to the dealer and they stated that the repair would cost $1,100. The contact called the manufacturer and they instructed the dealer to repair the vehicle at 50% of the cost; however, the dealer refused. The failure mileage was 80,000.

NHTSA complaint #10256505
Oct 15, 2008service brakes, hydraulic

Tl*the contact owns a 2002 GMC Yukon XL. When the brake pedal was depressed, the contact experienced unwanted antilock brake activation. As a result, the vehicle lunges forward before coming to a complete stop. The dealer replaced the antilock speed sensor and the front hub assembly at the cost of $600. The failure mileage was 62,500 and current mileage was 63,630. Updated 11/14/08. *lj updated 11/18/08. *jb

NHTSA complaint #10245578
Jun 6, 2008parking brake

2002 GMC Yukon XL. *tr

NHTSA complaint #10230146
Oct 24, 2007service brakes, hydraulic
Tl*the contact owns a 2002 GMC Yukon XL. The contact stated that the ABS was failing and the antilock braking pump continuously runs. He took the vehicle to the dealer and they informed him that the pad-circuit board was failing and caused the pump to run at high speeds. This could lead to overheat and a possible fire. The failure occurs after driving the vehicle at any… Read more

Tl*the contact owns a 2002 GMC Yukon XL. The contact stated that the ABS was failing and the antilock braking pump continuously runs. He took the vehicle to the dealer and they informed him that the pad-circuit board was failing and caused the pump to run at high speeds. This could lead to overheat and a possible fire. The failure occurs after driving the vehicle at any speed. When the engine was shut off, it made a high pitched motor noise. He searched and discovered NHTSA campaign id number 05v379000 (service brakes, hydraulic:antilock). The recall only applies to certain states and his VIN was not included. The vehicle has not been repaired. The failure mileage was 79,000 and current mileage was 93,000. Updated 11/06/07 *tr

NHTSA complaint #10206741
Sep 4, 2007service brakes, hydraulic, air bags
Events leading up to the failure: 2002 yukon 73,000 miles. No previous events leading up to the problem. Failure/consequences: 2002 yukon: I started my car and ABS light stayed on. While driving, I could feel an abnormal vibration throughout my car. (with my two small children, we pulled off to the side of the road on the right of way. I cut off my car (removed key out of… Read more

Events leading up to the failure: 2002 yukon 73,000 miles. No previous events leading up to the problem. Failure/consequences: 2002 yukon: I started my car and ABS light stayed on. While driving, I could feel an abnormal vibration throughout my car. (with my two small children, we pulled off to the side of the road on the right of way. I cut off my car (removed key out of ignition) and the car sounded like it was still on. Correct the problem: I called my GMC dealer in austin texas where I had purchased the vehicle and the service manager told me that he has seen many incidents such as this. He indicated that if I left the ABS motor running, that my battery would die and/or the motor would ruin. So, he instructed me to raise the hood and remove the 60amp ABS fuse. By doing so, the vibration/motor stopped. He said to bring it into the garage for service. His initial guess was that it was the ABS module or ebcm needed to be replaced. Because my vehicle was no longer in warranty, he estimated that it could cost anywhere between $1100.00-1900.00 dollars. I have done research on the internet and there are many 1999-2004 GM suvs and trucks which have experienced this problem. I am requesting that a recall be placed for these modules. *tr

NHTSA complaint #10201801
Aug 29, 2007service brakes, air
On 8-26-07 while driving home the ABS light came on. Checked vehicle manual. After turning off the vehicle we could hear what sounded like a motor or fan noise running. Thinking it was probably the AC fan we went in the house for the evening. The next morning we could still hear the noise and found out my battery was dead. Jump started vehicle and took it in to mechanic to do… Read more

On 8-26-07 while driving home the ABS light came on. Checked vehicle manual. After turning off the vehicle we could hear what sounded like a motor or fan noise running. Thinking it was probably the AC fan we went in the house for the evening. The next morning we could still hear the noise and found out my battery was dead. Jump started vehicle and took it in to mechanic to do a diagnostic search and was told we needed to replace ABS control module. After researching on the internet found out there had been several recalls for this, but not with my VIN #. Have called GM corp to report this and am currently waiting to hear back.

NHTSA complaint #10201102
Jul 24, 2007service brakes, hydraulic
Tl*the contact owns a 2002 GMC Yukon XL. While driving 5 MPH or less, the ABS engaged without warning and caused the vehicle to jerk. The road conditions were clear. The ABS was repaired under recall number 05v379000 (service brakes, hydraulic:antilock), however, the failure continued to occur. The dealer stated that they would be unable to repair the vehicle as part of… Read more

Tl*the contact owns a 2002 GMC Yukon XL. While driving 5 MPH or less, the ABS engaged without warning and caused the vehicle to jerk. The road conditions were clear. The ABS was repaired under recall number 05v379000 (service brakes, hydraulic:antilock), however, the failure continued to occur. The dealer stated that they would be unable to repair the vehicle as part of the recall because it only covered cleaning the sensors. The current mileage was 104,807 and failure mileage was 77,000. Updated11/27/07. *jb

NHTSA complaint #10197366
Apr 25, 2007service brakes, hydraulic

Tl* the contact owns a 2002 GMC Yukon XL. The contact stated that the ABS and emergency brake indicator lights illuminated intermittently. The dealer stated that the ABS sensor needed to be replaced. The current mileage is 93,000, and failure mileage was 91,000. *ak

NHTSA complaint #10188793
Dec 7, 2006service brakes, hydraulic
2002 yukon w/ABS light on and some kind of motor running even if my vehicle is off. The next morning my battery was dead. I took it to a dealership who told me that I needed a new ABS module/pump and it would cost between $950 to $1,200 to fix. They disconnected the motor to keep from running and draining my battery. I have not had any problems with my brakes, they are fine.… Read more

2002 yukon w/ABS light on and some kind of motor running even if my vehicle is off. The next morning my battery was dead. I took it to a dealership who told me that I needed a new ABS module/pump and it would cost between $950 to $1,200 to fix. They disconnected the motor to keep from running and draining my battery. I have not had any problems with my brakes, they are fine. Brakes were inspected and passed inspection. Called GMC recall line and was told there was no recall for 2002 yukons in texas. *jb

NHTSA complaint #10175517
Oct 19, 2006service brakes, hydraulic
ABS light came on; drove a few days after that. While driving at approximately 7 miles per hour, I tried to stop for a light and nearly hit car in front of me. Brakes rumbled to a halt, fortunately. Took car to brake check, had to have bolts on hub bearing replaced. Contacted GMC to help share in cost of repair, as there has been a recall (2002 GMC yukon recall id from… Read more

ABS light came on; drove a few days after that. While driving at approximately 7 miles per hour, I tried to stop for a light and nearly hit car in front of me. Brakes rumbled to a halt, fortunately. Took car to brake check, had to have bolts on hub bearing replaced. Contacted GMC to help share in cost of repair, as there has been a recall (2002 GMC yukon recall id from NHTSA: 05v379000 ) in certain "salt belt states", due to corrosion. They refused any assistance because 1) car is out of warranty (I have 82,000 miles on it), 2) I didn't take it to a GM dealer, and 3) there hasn't been a recall issued specifically for my car! *nm

NHTSA complaint #10171359
Jun 20, 2006steering, service brakes, hydraulic
Dt*: the contact stated in november when the vehicle was taken to the dealership for routine service, the dealership noticed the rear rotors were hitting the inside of the backing plates inside the hub. Also, the rotors were rusted. The front end was also observed to be shaking. The dealership determined the shaking was normal 4x4 characteristics; however the dealership… Read more

Dt*: the contact stated in november when the vehicle was taken to the dealership for routine service, the dealership noticed the rear rotors were hitting the inside of the backing plates inside the hub. Also, the rotors were rusted. The front end was also observed to be shaking. The dealership determined the shaking was normal 4x4 characteristics; however the dealership installed a lube kit that goes on the steering column underneath the hood. The shaking returned and the dealership informed the contact the lube kit was no longer a remedy for this shaking problem. There was not another remedy offered.

NHTSA complaint #10160274
May 4, 2006parking brake
In may 2005 my vehicle failed state inspection due to parking brake could not hold vehicle. Prior to having the repairs done I contacted the dealership where I had purchased it and was told there was no recall at this time. I then had the place where the inspection was done repair the vehicle. In april of 2006 I noticed my brakes were squeaking when I was in reverse. I… Read more

In may 2005 my vehicle failed state inspection due to parking brake could not hold vehicle. Prior to having the repairs done I contacted the dealership where I had purchased it and was told there was no recall at this time. I then had the place where the inspection was done repair the vehicle. In april of 2006 I noticed my brakes were squeaking when I was in reverse. I took it in for repair and was told the back pads that were replaced last year needed to be replaced again. I contacted GM and was told there was nothing to be done because there is no recall on my vehicle. This is a 2002 GMC yukon I bought new in 2001. It has 56000 miles on it. I do not feel I should be having this many problems. The GM rep was not helpful at all. I will never buy another GM vehicle again. *nm

NHTSA complaint #10156804
Apr 24, 2006parking brake

Dt*: the contact stated the parking brake failed to pass inspection. The vehicle was taken to the dealer where the parking brake was replaced.

NHTSA complaint #10155943
Jan 25, 2006service brakes, hydraulic

Dt*: the contact stated the ABS pump stays on after shutting the vehicle off. There is a NHTSA recall, # 05v379000, regarding the ABS. The vehicle has the same problems as indicated in the recall; however it is not included in the recall due to the VIN. The vehicle was taken to the dealership.

NHTSA complaint #10148598
Jan 23, 2006service brakes, hydraulicCrash
Consumer's vehicle followed a school bus, no children were on the bus. Around 7:50 am the bus stopped for red light. Speed was approximately 20-25 MPH. As the brake pedal was pushed down the vehicle began to slow down, but it did not slow as quickly as normal. The ABS engaged, but the vehicle continued to proceed forward. There was plenty of room and time that the… Read more

Consumer's vehicle followed a school bus, no children were on the bus. Around 7:50 am the bus stopped for red light. Speed was approximately 20-25 MPH. As the brake pedal was pushed down the vehicle began to slow down, but it did not slow as quickly as normal. The ABS engaged, but the vehicle continued to proceed forward. There was plenty of room and time that the vehicle should have stopped but it did not. The vehicle bumped the rear of the bus, pushing in the bumper of vehicle. This incident followed the pattern set forth in NHTSA recall 05v379000 on august 29 2005. However, on november 18, 2005 the local dealer performed the procedure that GMC recommended to correct this problem, but I feel that the vehicle still failed in this incident.*ak

NHTSA complaint #10148369
Dec 30, 2005service brakes, hydraulic

Dt: the contact states there is a NHTSA recall campaign 05v379000 regarding the antilock brakes. The vehicle has the same problems as indicated in the recall; however, it is not included in the recall due to the VIN. No repairs have been made.*ak

NHTSA complaint #10146583
Oct 5, 2005parking brake

Parking brake failure. Parking brake no longer holds vehicle in place. Dealer claims linings wore prematurely. Parts were not in stock, so waiting for repair. Very similar to parking brake recall on 2001 GMC sierra pickup recall #05v161000. *nm

NHTSA complaint #10138620
Oct 4, 2005service brakes, hydraulic

ABS problem on a 2002 GMC Yukon XL. Low speed ABS coming on every time brake pedal is used under 15 MPH. GMC recalled problem but only in eastern states, I live in utah which is not covered in recall. *nm

NHTSA complaint #10138601
Sep 26, 2005service brakes, hydraulic

The brakes on my car are not working properly. It is happening more and more every day. I almost ran into my garage. When I am pulling up. About to make a stop. The brakes go out. *jb

NHTSA complaint #10137571
Aug 16, 2005service brakes, hydraulic
Have had problems with brakes. They do not stop properly, you never know when they are going to work or not. My wife has on different occasions on the freeway applied the brakes quickly and the pedal went down to the floor, thank god there was an emergency lane where she swerved out to. It has also happened to me. We are told that you do not pump the brakes on an ABS braking… Read more

Have had problems with brakes. They do not stop properly, you never know when they are going to work or not. My wife has on different occasions on the freeway applied the brakes quickly and the pedal went down to the floor, thank god there was an emergency lane where she swerved out to. It has also happened to me. We are told that you do not pump the brakes on an ABS braking system, well my wife came home and told me by pumping the pedal the brakes seem to stop a little better. Now what do you think that is telling you??? I have been in the automotive business for over 40 years, and have never had a problem like this. They have yet to fix the problem because they say there is nothing wrong, and since the vehicle did not come in on a hook and or was not in a accident they would not do anything. We have been complaining about the brakes since we purchased the vehicle. At this point I will never purchase another GMC again, and I am letting everyone know this. Hope you can help or have some suggestions. Thank you for your time in this matter. Manny. *nm

NHTSA complaint #10132972
Jul 11, 2005parking brake
I have a 2002 GMC yukon. It has 70,000 miles on it. I recently tried to get it inspected. It failed because of the parking brake. I was told that there have been several GM products that have this same problem. I took my vehicle back to the dealer. The told me that there has been several problems with the parking brake and it has been re-designed. They also said that it was… Read more

I have a 2002 GMC yukon. It has 70,000 miles on it. I recently tried to get it inspected. It failed because of the parking brake. I was told that there have been several GM products that have this same problem. I took my vehicle back to the dealer. The told me that there has been several problems with the parking brake and it has been re-designed. They also said that it was not re-called beause it is not a safety isue.(although I could not get a safety inspection because of it). I agreed with the dealer to pay 50% of the cost to fix it. When the vehicle was repaired I noticed on the receipt, and the cashier acknowleded it, that it was covered under warranty. The next day the dealer called wanting to collect $150.00 for the repairs. I feel this should be a recall. I would like for someone to look into this matter and e-mail me the results.

NHTSA complaint #10128253
Feb 3, 2005service brakes, hydraulic, power train
While driving my 2002 Yukon XL, there is yellow light appeared on the I/p cluster message center. "service 4wd" and when gently apply/pressing on the brake pedal, the is some kind of loud mechanism noise in the front wheel driver side, and prevent the brake pedal from coming down. Three times that I almost rear end other vehicles. Took the vehicle to the dealership to get it … Read more

While driving my 2002 Yukon XL, there is yellow light appeared on the I/p cluster message center. "service 4wd" and when gently apply/pressing on the brake pedal, the is some kind of loud mechanism noise in the front wheel driver side, and prevent the brake pedal from coming down. Three times that I almost rear end other vehicles. Took the vehicle to the dealership to get it fixed, the cost was $2212.93 for fixing brake system failure including anti brake system and 4wheel drive. Dealer recommended to a report to NHTSA.

NHTSA complaint #10108502
Jan 25, 2005parking brake
During 2004 state vehicle emissions and safety inspection it was determined that the parking brake did not work. As a result vehicle failed inspection and will not pass until issue resolved. When parking brake is pressed, the pedal easily reaches the floor and does not hold vehicle. GMC customer assistance notified 01/25/05. Not sure on resolution. Dealer wants to replace… Read more

During 2004 state vehicle emissions and safety inspection it was determined that the parking brake did not work. As a result vehicle failed inspection and will not pass until issue resolved. When parking brake is pressed, the pedal easily reaches the floor and does not hold vehicle. GMC customer assistance notified 01/25/05. Not sure on resolution. Dealer wants to replace entire rear brake assembly, quote high cost for work, not covered under extended warranty, dealer blaming on normal wear and tear. Inspection place commented on similar issues with all other GMC yukon 2002 model. *nm

NHTSA complaint #10107895
Dec 22, 2004parking brake

During 2004 state vehicle emissions and safety inspection it was determined that the parking brake did not work. As a result vehicle failed inspection and will not pass until issue resolved. GMC customer assistance notified 12/21 and diagnosis and repair to begin 12/22. When parking brake is pressed, the pedal easily reaches the floor and does not hold vehicle. *jb

NHTSA complaint #10104291
Oct 18, 2004parking brake

The parking brake did not engage when depressed all the way to the floor. The owner has contacted the manufacturer and the dealership and they stated there was nothing wrong. The owner received a second opinion and was told that the positioning of the parking brake was defective. Provide further details. *jb

NHTSA complaint #10097071
Sep 18, 2003service brakes, hydraulic
I have a 2002 GMC Yukon XL. I bought the vehicle brand new in june of 2002. At 376 miles my brake system locked up. I have continued to have this problem ever since. As your driving the brakes apply and you loose control of your steering. This problem does not occur all the time, but does happen. They have replaced my master cylinder, power booster, and all 4 rotors. … Read more

I have a 2002 GMC Yukon XL. I bought the vehicle brand new in june of 2002. At 376 miles my brake system locked up. I have continued to have this problem ever since. As your driving the brakes apply and you loose control of your steering. This problem does not occur all the time, but does happen. They have replaced my master cylinder, power booster, and all 4 rotors. This problem is still not fixed and because the dealership can not get it to duplicate the problem while they are driving it, they say there is nothing else they can do. I am filing this complaint because I fear for my safety. The last time it happened on 9/11/03 it was towed to the nearest dealership, they have informed me there is nothing they can do. I have left the vehicle there because I fear driving it. Last thing I heard was they were shipping it to the dealership where I bought it because it was there problem. Please if you know anything I can do please let me know. I would like to add that there has been evidence of defect because the rotors have shown damage due to defect. *jb

NHTSA complaint #10039100
Mar 21, 2003service brakes, hydraulic
The brake line (a metal rod, not hose) broke off, on an ice mountain road on december 23, 2002. The car was brand new with 9800 miles on it and there my three children ages 3, 3, and 5 were in the car. We were towed down the mountain for 60 miles. General motors fixed the brake line and took over two months to get back to me with a $55.00 reimbursement for the car… Read more

The brake line (a metal rod, not hose) broke off, on an ice mountain road on december 23, 2002. The car was brand new with 9800 miles on it and there my three children ages 3, 3, and 5 were in the car. We were towed down the mountain for 60 miles. General motors fixed the brake line and took over two months to get back to me with a $55.00 reimbursement for the car rental. This could have been catastrophic for my family. The car could not stop at all. *nlm

NHTSA complaint #10010848
← All 2002 GMC Yukon XL problems & recalls