CarProblemsDB

2005 GMC Sierra 2500 HD brakes problems

23 owners reported brakes problems — 28% of all 82 complaints about the 2005 GMC Sierra 2500 HD.

Brakes complaints by GMC Sierra 2500 HD year

200523
200437
200356
200263
200153

What owners report

Mar 2, 2017service brakes

Break line rusted and broke almost resulting in an accident when trying to stop brake petal went to floor

NHTSA complaint #10957984
Dec 15, 2014service brakes

The brakes went to the floor and vehicle did not stop, barely avoided a crash. Found pool of brake fluid under truck. Firestone auto charged $675 to replace a rusted out brake line. All other lines are heavily corroded and ready to fail as well. *tr

NHTSA complaint #10664258
Mar 25, 2014service brakes

Brake line under drivers side broke leaving vehicle without any regular stopping capability and requiring tow. Estimated replacement of all lines recommended by GMC dealer due to failures being common, $1,480 plus tax. *tr

NHTSA complaint #10574824
Dec 17, 2013service brakes

Brakes failed to stop vehicle at intersection/stoplight. Brake pedal went to floor and stayed there. Determined that rust through in brake line at driver side of frame, under driver seat, had allowed fluid loss. *tr

NHTSA complaint #10556368
Oct 2, 2012service brakes
Driving through an intersection at 40 when a another vehicle made a left turn in front of me . I applied my brakes and pedal went to the floor . I swerved and avoided the on coming vehicle . The rear hard steel brake line above the fuel tank burst due to corrosion . No warning no fluid or brake light just a catastrophe failure of line. Upon inspection line is not… Read more

Driving through an intersection at 40 when a another vehicle made a left turn in front of me . I applied my brakes and pedal went to the floor . I swerved and avoided the on coming vehicle . The rear hard steel brake line above the fuel tank burst due to corrosion . No warning no fluid or brake light just a catastrophe failure of line. Upon inspection line is not corroded on the frame rail before the fuel tank just behind the tank. *tr

NHTSA complaint #10478377
Sep 24, 2012service brakes

Depressed brake pedal to stop truck and pedal went straight to the floor. Front brake lines had ruptured due to corrosion. This truck is my main tow vehicle and I had a small trailer on when this occurred. My truck has not seen much winter use since new and I am the owner since new. *tr

NHTSA complaint #10476785
Sep 4, 2012service brakes, hydraulic, engine and engine cooling
Tl* the contact owns a 2005 GMC sierra 3500. The contact stated that while driving 40 MPH, the brakes were engaged and the vehicle failed to stop. The contact mentioned that he had to engage the emergency brake in order for the vehicle to stop. Also, the contact stated that after inspecting the vehicle he noticed oil leaking. The vehicle was not taken to the dealer. The… Read more

Tl* the contact owns a 2005 GMC sierra 3500. The contact stated that while driving 40 MPH, the brakes were engaged and the vehicle failed to stop. The contact mentioned that he had to engage the emergency brake in order for the vehicle to stop. Also, the contact stated that after inspecting the vehicle he noticed oil leaking. The vehicle was not taken to the dealer. The vehicle was taken to an independent mechanic who diagnosed that the brake lines needed to be replaced. The manufacturer was made aware of the failure who did not offer any assistance. The failure and current mileage was 42,000. Updated 10/24/12 *cn updated 11/08/12

NHTSA complaint #10473726
Mar 22, 2012steering, service brakes, hydraulic, power train, electrical system
Tl* the contact owns a 2003 GMC Sierra 2500 HD. The contact stated that the power steering would seize and the vehicle would hesitate to stop when the brakes were depressed. In addition, the transmission, windshield wipers, cruise control, and the instrument cluster failed. The vehicle was taken to the dealer who replaced the transmission, but the failure recurred. The… Read more

Tl* the contact owns a 2003 GMC Sierra 2500 HD. The contact stated that the power steering would seize and the vehicle would hesitate to stop when the brakes were depressed. In addition, the transmission, windshield wipers, cruise control, and the instrument cluster failed. The vehicle was taken to the dealer who replaced the transmission, but the failure recurred. The manufacturer was notified of the failures, but denied any assistance with repairs to the vehicle. The vehicle was not further repaired. The failure mileage was 29 and the current mileage was 100,000.

NHTSA complaint #10452624
Aug 1, 2011suspension, service brakes, hydraulic, parking brake, engine and engine cooling, structure
Major rust of the undercarriage of my 2005 GMC sierra 78,000 miles. So far had to replace brake rotors, brake lines , fuel radiator and lines. Frame and cross members as well as control arms are all rusted. Made complaint with GMC they had me bring to a dealer to tell me this is normal rusting. Two of my relatives have the same year truck but are not experiencing this issue… Read more

Major rust of the undercarriage of my 2005 GMC sierra 78,000 miles. So far had to replace brake rotors, brake lines , fuel radiator and lines. Frame and cross members as well as control arms are all rusted. Made complaint with GMC they had me bring to a dealer to tell me this is normal rusting. Two of my relatives have the same year truck but are not experiencing this issue and we all live in the same area drive same roads. *kb

NHTSA complaint #10416571
Jul 13, 2011service brakes, hydraulic
Tl* the contact owns a 2005 GMC sierra 3500hd. The contact stated while at a complete stop with the brake pedal engaged, the vehicle began to lunge forward; followed by the illumination of the ABS warning light and a chime sounding inside the vehicle intermittently. The vehicle was taken to an authorized dealer who stated both front brake hubs and sensors would need to be… Read more

Tl* the contact owns a 2005 GMC sierra 3500hd. The contact stated while at a complete stop with the brake pedal engaged, the vehicle began to lunge forward; followed by the illumination of the ABS warning light and a chime sounding inside the vehicle intermittently. The vehicle was taken to an authorized dealer who stated both front brake hubs and sensors would need to be replaced; however the parts were not included in the extended service warranty. The vehicle was not repaired and the manufacturer was made aware of the defect. The approximate failure mileage was 40,000. Updated 9/13/11 *cn the consumer stated the ABS light chimed. Udpated 01/03/12

NHTSA complaint #10412102
Jun 12, 2011service brakes, hydraulic

2005 GMC 2500hd ABS slow stopping problems due to probably sensor corrosion,same as what was described and supposed to be corrected in earlier year models. Live in maine heavy road salting started about a year ago and has gotten progressively worse. *tr

NHTSA complaint #10405997
Apr 22, 2010service brakes, hydraulic
Tl*the contact owns a 2005 GMC Sierra 2500 HD diesel. The contact stated that on april 19, 2010 when pulling out of the garage at 2 MPH, the brakes and steering suddenly stopped function. There were no warning lights illuminated that indicated the cause of the failure. When the contact turned off the vehicle and restarted it, the vehicle suddenly accelerated. The contact… Read more

Tl*the contact owns a 2005 GMC Sierra 2500 HD diesel. The contact stated that on april 19, 2010 when pulling out of the garage at 2 MPH, the brakes and steering suddenly stopped function. There were no warning lights illuminated that indicated the cause of the failure. When the contact turned off the vehicle and restarted it, the vehicle suddenly accelerated. The contact depressed the emergency brake pedal and the vehicle stopped; it was towed to an authorized dealership where it was being repaired at the time of the complaint. The contact was informed that his vehicle was not included in any related recalls. The current and failure mileages were approximately 38,000. Updated 11/11/10 *bf the consumer stated he experienced a hydro boost failure. As he was pulling out of the garage, the steering and braking mechanisms malfunctioned. Updated 11/18/10

NHTSA complaint #10327022
Apr 13, 2010service brakes, hydraulic
Tl*the contact owns a 2005 GMC sierra 2500hd. The contact stated tht the vehicle lunged ten feet when he depressed the brake pedal upon coming to a stop sign. Extra effort was required to stop which increased the stopping distance. The ABS fuse was removed based on advice by a mechanic. After removal of the fuse, the problem stopped; when the fuse was reinstalled, the problem… Read more

Tl*the contact owns a 2005 GMC sierra 2500hd. The contact stated tht the vehicle lunged ten feet when he depressed the brake pedal upon coming to a stop sign. Extra effort was required to stop which increased the stopping distance. The ABS fuse was removed based on advice by a mechanic. After removal of the fuse, the problem stopped; when the fuse was reinstalled, the problem returned. The vehicle was tkane to an authorized dealership who informed him that the brakes were functioning normally. The VIN was unavailable at the time of the complaint.

NHTSA complaint #10325481
Mar 9, 2010service brakes, hydraulic

For almost a year now the brakes "drop out" or essentially quit slowing the truck below 10 MPH. Extra effort is required to stop. This has caused numerous near miss rear end collisions. When towing an 8000 pound trailer this is a significant safety hazard. I removed the ABS brake fuse on the advice of a tech and the problem stopped immediately. With the fuse reinstalled the problem returns. *tr

NHTSA complaint #10318220
Mar 2, 2010service brakes, hydraulic
2005 GMC sierra k2500 pickup truck. Problem - brakes fade when coming to a complete stop. Brakes work fine until vehicle slows to 5-10mph at which time brake pedal loses pressure - unexpectedly increases stopping distance by 10-15 feet creating hazardous condition. Attempted resolution - replaced all four brake rotors and pads at own expense. Problem still exists. … Read more

2005 GMC sierra k2500 pickup truck. Problem - brakes fade when coming to a complete stop. Brakes work fine until vehicle slows to 5-10mph at which time brake pedal loses pressure - unexpectedly increases stopping distance by 10-15 feet creating hazardous condition. Attempted resolution - replaced all four brake rotors and pads at own expense. Problem still exists. Went to dealerand discovered that this is apparently a common problem related to the anti-lock brake sensors located in each wheel assembly. They claim this braking system failure is due to normal wear and tear and not a manufacturers defect or faulty design... My problem is this - if the dealer (and, by extension, the manufacturer) knows that the brake system is going to start failing after a few years of operation, then how is this due to normal wear and tear and not a design defect??? This is clearly an example of a manufacturer putting out a product that they know will fail in time and, thus, create a hazardous safety condition. *tr

NHTSA complaint #10315473
Sep 1, 2009steering, service brakes, hydraulic

The hydraulic brake booster's pressure accumulator cracked and /or separated from the hydro-boost assembly during normal vehicle operating conditions. The presence of this crack or fractured surface allowed the hydraulic fluid to leak from the accumulator circuit of the booster assembly. The loss of fluid caused increased steering and braking effort. *tr

NHTSA complaint #10282587
Aug 28, 2009service brakes, hydraulic

Tl*the contact owns a 2005 GMC Sierra 2500 HD. The brake pedal had to be extended to the floor in order to stop the vehicle. The vehicle has not been diagnosed by the dealer. The contact also noticed that they would gradually need more braking distance before coming to a complete stop. The current and failure mileages were 39391.

NHTSA complaint #10282178
Jun 21, 2009service brakes, hydraulic

I own a 2005 GMC sierra 2500hd. I am having the same ABS problems in campaign # 05v379000. As I come to a stop the ABS system kicks in and increases my stopping distance. *tr

NHTSA complaint #10274439
Apr 22, 2009service brakes, hydraulic
Tl*the contact owns a 2005 Sierra 2500 HD. After starting the vehicle and turning the steering wheel, the service brakes locked. Without warning, the brake pedal depressed automatically without assistance. There were no warning light indicators illuminated on the instrument panel. The vehicle was towed to an authorized dealer for inspection. The technician stated that the… Read more

Tl*the contact owns a 2005 Sierra 2500 HD. After starting the vehicle and turning the steering wheel, the service brakes locked. Without warning, the brake pedal depressed automatically without assistance. There were no warning light indicators illuminated on the instrument panel. The vehicle was towed to an authorized dealer for inspection. The technician stated that the failure was related to the hydraulic brake booster. The vehicle is inoperable and has not been repaired. The contact is aware of the safety risk involved. The failure and current mileages were 92,000.

NHTSA complaint #10266391
Feb 4, 2009service brakes, hydraulic

Brake pedal 'sinks' a bit toward floor, on slow stops, just before car comes to a stop. Occurs on almost every stop, brakes inspected and discs and pads are okay. *tr

NHTSA complaint #10257474
Nov 19, 2007steering, service brakes, hydraulic

Tl*the contact owns a 2005 GMC Sierra 2500 HD. While driving 65 MPH, the stopping distance increased when the brake pedal was depressed and the steering wheel locked. As of november 19, 2007, the dealer had not completed their inspection to determine the cause of the failure. The VIN was unknown. The current and failure mileages were 69,500.

NHTSA complaint #10209304
Dec 29, 2006steering, service brakes, hydraulic
Truck has been in dealer numerous times for severe noise of power steering pump, loss of brake boost and steering assist at low speeds. Pump was replaced and noised disappeared for just over 2 weeks and started again. Dealer explained that GM is aware of problem, but is only taking calls about the problem from one area code while they try to isolate. Dealer then replaced… Read more

Truck has been in dealer numerous times for severe noise of power steering pump, loss of brake boost and steering assist at low speeds. Pump was replaced and noised disappeared for just over 2 weeks and started again. Dealer explained that GM is aware of problem, but is only taking calls about the problem from one area code while they try to isolate. Dealer then replaced the steering gear with no correction of problem. At a standstill, turning the steering wheel about 3/4 turn results in complete loss of steering assist and sometimes brake boost, plus excessive pump noise. Dealer is now trying to tell me this is normal. There is a technical bulletin on this problem. GM has instructed dealers not to replace the power steering pump. As they have received too many pumps under warranty that appear to have no problem. Driving the vehicle at 1200 rpm and steering right or left will generate a groaning noise that drowns conversation in the cab and at times results in reduced or failed brake boost. The same loud groaning noise occurs when slowing the vehicle from highway speeds without any turning of the steering wheel, as the engine rpm falls through the 1200 rpm range. Sounds like a hydraulic system with air in the system, low fluid or being push to over-capacity. GM is not being responsive to the excessive number of customer complaints. I know others with the same problem on several years of 2500hd duramax trucks. It is not at all difficult to find others with

NHTSA complaint #10177349
← All 2005 GMC Sierra 2500 HD problems & recalls