10 owners reported suspension problems — 2% of all 609 complaints about the 2021 GMC Sierra 1500.
Suspension complaints by GMC Sierra 1500 year
20252
20243
20233
20224
202110
202018
201910
201811
20178
201518
201424
201310
20124
20119
20103
20094
20083
20079
200611
20055
20044
20032
20029
20011
20006
What owners report
Oct 3, 2026steering, suspension, structureCrash
Vehicle safety hazard summary: this complaint concerns an incomplete, non-compliant post-collision structural repair on a 2021 GMC Sierra 1500 (VIN: [xxx]). It has resulted in immediate vehicle tracking failure, dangerous steering drift, and a compromised cabin safety cage following a passenger-side side-impact collision. 1. Severe suspension and tracking misalignment •… Read more
Vehicle safety hazard summary: this complaint concerns an incomplete, non-compliant post-collision structural repair on a 2021 GMC Sierra 1500 (VIN: [xxx]). It has resulted in immediate vehicle tracking failure, dangerous steering drift, and a compromised cabin safety cage following a passenger-side side-impact collision. 1. Severe suspension and tracking misalignment • electronic alignment failure: the post-repair electronic wheel alignment documents a rear thrust angle of 0.17°. General motors oem specifications require a maximum allowable thrust angle of 0.10° or less for this 4wd crew cab chassis. The system printed a critical warning: "one or more values are not within specification. Tire wear, handling and safety problems may result." • physical wheelbase displacement: physical cross-measurements confirm a 1.25-inch tracking variance between the rear wheel wells. This proves the solid rear axle has shifted along the leaf springs due to a sheared centering pin or a bent axle/spindle assembly. • road hazard handling: the truck exhibits a severe right-hand steering drift. The driver must hold the steering wheel significantly off-center to prevent the vehicle from pulling off the road. This creates an immediate risk of control loss during highway driving, sudden avoidance maneuvers, or wet weather. 2. Compromised cabin structure and latch failure • structural binding: the facility performed an outer b-pillar sectioning repair. Upon delivery, the b-pillar door check bracket
NHTSA complaint #11768724
Sep 18, 2026suspension, engine
Both of my upper ball joints wore out and one broke as I was driving down the road at 65 miles an hour pulling me into the on coming lane of traffic, there was no warning of this. I had both upper and lower ball joint replace. If there had been another vehicle coming in the on coming lane we would have had a head on collision. At an earlier date the motor in this same truck… Read more
Both of my upper ball joints wore out and one broke as I was driving down the road at 65 miles an hour pulling me into the on coming lane of traffic, there was no warning of this. I had both upper and lower ball joint replace. If there had been another vehicle coming in the on coming lane we would have had a head on collision. At an earlier date the motor in this same truck had a fallen lifter which cause my motor to loss power, I was able to take it to the local GM dealer and they fixed it, there was no warning this was happening either. I am worried I will have a catastrophic engine failure and GM will not cover this. I have looked up my
NHTSA complaint #11765281
Jul 24, 2026steering, suspension, service brakes
Vehicle: 2021 GMC sierra slt | VIN: [xxx] dealership: carl black GMC roswell, ga (11225 alpharetta hwy, 30076) | invoice #[xxx] | service date: [xxx] paragraph 1 – suspension hazard: dealership diagnosed a worn left upper ball joint (popping sound on left turns) and installed rough country aftermarket upper control arms on my stock-height sierra slt. These arms are designed… Read more
Vehicle: 2021 GMC sierra slt | VIN: [xxx] dealership: carl black GMC roswell, ga (11225 alpharetta hwy, 30076) | invoice #[xxx] | service date: [xxx] paragraph 1 – suspension hazard: dealership diagnosed a worn left upper ball joint (popping sound on left turns) and installed rough country aftermarket upper control arms on my stock-height sierra slt. These arms are designed for lifted suspension and alter factory caster/camber geometry, placing extreme stress on ball joints. This can cause sudden ball joint separation, wheel collapse, and total loss of steering control at speed. The dealership admitted on the invoice they "could not find branding" on original parts and chose non-oem lift components without my consent or any safety disclosure. Paragraph 2 – brake failure & no safety warning: the same service included a full front/rear brake job (pads + resurfaced rotors) using their certified technicians and parts. After pickup, the brakes failed to operate properly. When I returned, the service manager refused to correct their own workmanship and instead quoted $1,900 to repair the very brakes they just serviced. Most critically, at vehicle pickup they issued no written or verbal safety warning—no "do not drive" instruction—despite the brakes being knowingly compromised, endangering me and the public. Paragraph 3 – requested action: the service manager was unprofessional, condescending, and refused accountability. I request an immediate NHTSA investigation into carl black
NHTSA complaint #11752674
Apr 23, 2026suspension, service brakes, hydraulic
The contact owns a 2021 GMC Sierra 1500. The contact stated that while her son was driving 55 MPH and depressing the brake pedal, the vehicle failed to slow down as intended. The driver attempted to use the parking brake to slow the vehicle, but the vehicle failed to slow down. The message “braking system failure” was displayed. The driver pulled over to the side of the road,… Read more
The contact owns a 2021 GMC Sierra 1500. The contact stated that while her son was driving 55 MPH and depressing the brake pedal, the vehicle failed to slow down as intended. The driver attempted to use the parking brake to slow the vehicle, but the vehicle failed to slow down. The message “braking system failure” was displayed. The driver pulled over to the side of the road, and the passenger’s side front wheel detached and started leaning to the right before the vehicle came to a stop. The driver exited to inspect the vehicle and became aware that the front passenger’s side wheel was lying on the ground. The vehicle was towed to an independent mechanic, but was not diagnosed. The vehicle was then towed to another dealer, where it was diagnosed, and it was determined that the passenger’s side upper and lower control arms, ball joints, rack and pinion, brake rotor and pads, hub, outer tie rod, brake line, speed wheel sensor, wheel and tire, and suspension parts needed to be replaced. The vehicle was not repaired. The manufacturer was notified of the failure. The failure mileage was 77,000.
NHTSA complaint #11733285
Mar 8, 2026suspension, power train
Transmission shuttering which was confirmed from from GMC dealership , but refused to do any repairs after confirmation or diagnostic and test driving. Demanded a 220$ fee be paid before releasing my vehicle back. Also gave GMC bulliten # 25-na-148 which states the same issues I'm currently having.